[Help!] usb 1-1.4: >device descriptor read/64, error -32

All Gurus once were Newbies
Forum rules
There are no such things as "stupid" questions. However if you think your question is a bit stupid, then this is the right place for you to post it. Please stick to easy to-the-point questions that you feel people can answer fast. For long and complicated questions prefer the other forums within the support section.
Before you post please read this

[Help!] usb 1-1.4: >device descriptor read/64, error -32

Postby violent23 on Sat Mar 16, 2013 1:33 pm

I have a Dell Inspiron n5050.

The specs are:

• 15.6” HD widescreen LED display
• 2.4GHz Intel Core i3 2370M processor
• 6GB DDR3 RAM
• 1TB SATA hard drive
• 8x DVD±RW drive
• Wi-Fi 802.11b/g/n
• Bluetooth 4.0
• 720p HD resoution
• Ethernet port
• 3 USB ports
• HDMI output
• VGA output

Whenever I run dmesg | grep usb I get.

Code: Select all
dmesg |grep usb
[    0.504044] ACPI: bus type usb registered
[    0.504061] usbcore: registered new interface driver usbfs
[    0.504069] usbcore: registered new interface driver hub
[    0.504087] usbcore: registered new device driver usb
[    0.865268] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
[    0.865273] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.865278] usb usb1: >Product: EHCI Host Controller
[    0.865283] usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
[    0.865287] usb usb1: >SerialNumber: 0000:00:1a.0
[    0.881246] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002
[    0.881252] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.881256] usb usb2: >Product: EHCI Host Controller
[    0.881261] usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
[    0.881266] usb usb2: >SerialNumber: 0000:00:1d.0
[    0.881495] usbcore: registered new interface driver libusual
[    1.177114] usb 1-1: >new high-speed USB device number 2 using ehci_hcd
[    1.309544] usb 1-1: >New USB device found, idVendor=8087, idProduct=0024
[    1.309553] usb 1-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.421041] usb 2-1: >new high-speed USB device number 2 using ehci_hcd
[    1.553247] usb 2-1: >New USB device found, idVendor=8087, idProduct=0024
[    1.553251] usb 2-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.624932] usb 1-1.4: >new full-speed USB device number 3 using ehci_hcd
[    1.696922] usb 1-1.4: >device descriptor read/64, error -32
[    1.894157] usb 1-1.4: >New USB device found, idVendor=0cf3, idProduct=3005
[    1.894167] usb 1-1.4: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.964803] usb 1-1.5: >new high-speed USB device number 4 using ehci_hcd
[    2.123565] usb 1-1.5: >New USB device found, idVendor=0c45, idProduct=643d
[    2.123575] usb 1-1.5: >New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    2.123580] usb 1-1.5: >Product: Laptop_Integrated_Webcam_0.3M
[    2.123585] usb 1-1.5: >Manufacturer: CN0JYKKC7248722800K4A01
[   13.103844] usbcore: registered new interface driver btusb
[   13.858572] input: Laptop_Integrated_Webcam_0.3M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input8
[   13.858653] usbcore: registered new interface driver uvcvideo


You can see the second line for usb 1.1.4 is device descriptor read/64, error -32. I do not know why I get this error as all 3 usb's work, as well as my camera, card reader, HDMI, bluetooth, Wifi, ethernet, VGA, DVD, and touchpad. I see this error on every distro of Linux I try. Mainly it gets irritating as I see this error when booting the newest versions of Fedora, openSUSE, and Fuduntu. Even though I do not see the error on boot with Linux Mint, Ubuntu 12, Xubuntu, and Kubuntu if I dmesg I can still see this error.

My lsusb output is.

Code: Select all
lsusb
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0cf3:3005 Atheros Communications, Inc. AR3011 Bluetooth
Bus 001 Device 004: ID 0c45:643d Microdia


Is there anyone here that could help me figure out why I am getting this error?
violent23
Level 1
Level 1
 
Posts: 16
Joined: Sun Sep 05, 2010 10:23 pm

Linux Mint is funded by ads and donations.
 

Return to Newbie Questions

Who is online

Users browsing this forum: Bing [Bot], Google Adsense [Bot], JonnyBB878, karlchen, Mute Ant, wwfwng and 35 guests