Resolution stuck at 800x600

All Gurus once were Newbies
Forum rules
There are no such things as "stupid" questions. However if you think your question is a bit stupid, then this is the right place for you to post it. Please stick to easy to-the-point questions that you feel people can answer fast. For long and complicated questions prefer the other forums within the support section.
Before you post please read this

Resolution stuck at 800x600

Postby SebastienC on Mon Nov 03, 2008 3:47 pm

Hi guys,

I seached over the boards and found allot of similar problems with the screen resolution but not exactly the one I have.

First heres my hardware :
Gforce6 6600

Heres What I did :
I activated the nvidia driver with hardware drivers and the only resolution available was 800x600 or smaller then after reading a few threads I used '' gksudo displayconfig-gtk '' to change my video card ( was on vesa ) to nvidia gf6 6600 then to only resolution available was still 800x600 or less so After some reading I changed my screen model to the default 1280x1024 lcd monitor and I was finally able to set the resolution to 1280x1024 BUT each time I reboot something is resetting and the card model is always reseting to VESA and I have to do the trick over and over .. Can someone help me with this??

BTW I tried to disable the driver and run Envy NG but I still have the same problem..

Thanks in advance

sebastien
SebastienC
Level 1
Level 1
 
Posts: 9
Joined: Mon Nov 03, 2008 3:34 pm

Linux Mint is funded by ads and donations.
 

Re: Resolution stuck at 800x600

Postby 67GTA on Mon Nov 03, 2008 5:44 pm

You can try setting it with nvidia-settings. Run it as root in a terminal. You need to become root with
Code: Select all
su
instead of gksudo. This should save your desired settings to your xorg.conf file. If this doesn't work, post a copy of your /var/log/Xorg.0.log file so we can see what is happening at boot time with xorg.
"The only thing necessary for the triumph of evil is for good men to do nothing." Edmund Burke
User avatar
67GTA
Level 6
Level 6
 
Posts: 1301
Joined: Wed Jun 06, 2007 9:49 pm
Location: Kentucky, USA

Re: Resolution stuck at 800x600

Postby SebastienC on Mon Nov 03, 2008 6:48 pm

67GTA wrote:You can try setting it with nvidia-settings. Run it as root in a terminal. You need to become root with
Code: Select all
su
instead of gksudo. This should save your desired settings to your xorg.conf file. If this doesn't work, post a copy of your /var/log/Xorg.0.log file so we can see what is happening at boot time with xorg.


ok , Tried SU but didnt fix the problem , once I turn off the computer or restart , the resolution is switching back to 800x600 and as requested heres my xorg.0.log

This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.

X.Org X Server 1.4.0.90
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux Ubuntu (xorg-server 2:1.4.1~git20080131-1ubuntu9)
Current Operating System: Linux sebastien-desktop 2.6.24-16-generic #1 SMP Thu Apr 10 13:23:42 UTC 2008 i686
Build Date: 15 April 2008 05:26:17PM

Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 3 17:55:25 2008
(==) Using config file: "/etc/X11/xorg.conf.failsafe"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Configured Monitor"
(**) | |-->Device "Configured Video Device"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified. Using compiled-in default.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
(==) RgbPath set to "/etc/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(==) |-->Input Device "Configured Mouse"
(==) |-->Input Device "Generic Keyboard"
(==) The core pointer device wasn't specified explicitly in the layout.
Using the first mouse device.
(==) The core keyboard device wasn't specified explicitly in the layout.
Using the first keyboard device.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81dc500
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(++) using VT number 9

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,02f4 card 1043,81d2 rev a2 class 05,00,00 hdr 80
(II) PCI: 00:00:1: chip 10de,02fa card 1043,81d2 rev a2 class 05,00,00 hdr 80
(II) PCI: 00:00:2: chip 10de,02fe card 1043,81d2 rev a2 class 05,00,00 hdr 80
(II) PCI: 00:00:3: chip 10de,02f8 card 1043,81d2 rev a2 class 05,00,00 hdr 80
(II) PCI: 00:00:4: chip 10de,02f9 card 1043,81d2 rev a2 class 05,00,00 hdr 00
(II) PCI: 00:00:5: chip 10de,02ff card 1043,81d2 rev a2 class 05,00,00 hdr 80
(II) PCI: 00:00:6: chip 10de,027f card 1043,81d2 rev a2 class 05,00,00 hdr 80
(II) PCI: 00:00:7: chip 10de,027e card 1043,81d2 rev a2 class 05,00,00 hdr 80
(II) PCI: 00:02:0: chip 10de,02fc card 0000,0000 rev a1 class 06,04,00 hdr 01
(II) PCI: 00:03:0: chip 10de,02fd card 0000,0000 rev a1 class 06,04,00 hdr 01
(II) PCI: 00:04:0: chip 10de,02fb card 0000,0000 rev a1 class 06,04,00 hdr 01
(II) PCI: 00:09:0: chip 10de,005e card 1043,815a rev a4 class 05,80,00 hdr 00
(II) PCI: 00:0a:0: chip 10de,0050 card 1043,815a rev a4 class 06,01,00 hdr 80
(II) PCI: 00:0a:1: chip 10de,0052 card 1043,815a rev a2 class 0c,05,00 hdr 80
(II) PCI: 00:0b:0: chip 10de,005a card 1043,815a rev a2 class 0c,03,10 hdr 80
(II) PCI: 00:0b:1: chip 10de,005b card 1043,815a rev a4 class 0c,03,20 hdr 80
(II) PCI: 00:0d:0: chip 10de,0059 card 1043,812a rev a2 class 04,01,00 hdr 00
(II) PCI: 00:0f:0: chip 10de,0053 card f043,815a rev f3 class 01,01,8a hdr 00
(II) PCI: 00:10:0: chip 10de,0054 card 1043,815a rev f3 class 01,01,85 hdr 00
(II) PCI: 00:11:0: chip 10de,0055 card 1043,815a rev f3 class 01,01,85 hdr 00
(II) PCI: 00:12:0: chip 10de,005c card 0000,0000 rev a2 class 06,04,01 hdr 01
(II) PCI: 00:13:0: chip 10de,0057 card 1043,8141 rev a3 class 06,80,00 hdr 00
(II) PCI: 00:16:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:17:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 02:00:0: chip 11ab,4362 card 1043,8142 rev 15 class 02,00,00 hdr 00
(II) PCI: 03:00:0: chip 10de,00f9 card 1043,8198 rev a2 class 03,00,00 hdr 00
(II) PCI: 04:08:0: chip 1102,0005 card 1102,0021 rev 00 class 04,01,00 hdr 00
(II) PCI: End of PCI scan
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:2:0), (0,1,1), BCTRL: 0x0002 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:3:0), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000a000 - 0x0000afff (0x1000) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xf2500000 - 0xf25fffff (0x100000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:4:0), (0,3,3), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 3 non-prefetchable memory range:
[0] -1 0 0xf2600000 - 0xf66fffff (0x4100000) MX[B]
(II) Bus 3 prefetchable memory range:
[0] -1 0 0xbff00000 - 0xdfefffff (0x20000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:10:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 4: bridge is at (0:18:0), (0,4,4), BCTRL: 0x0202 (VGA_EN is cleared)
(II) Bus 4 I/O range:
[0] -1 0 0x0000b000 - 0x0000bfff (0x1000) IX[B]
(II) Bus 4 non-prefetchable memory range:
[0] -1 0 0xf6700000 - 0xfeafffff (0x8400000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 5: bridge is at (0:22:0), (0,5,5), BCTRL: 0x0002 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 6: bridge is at (0:23:0), (0,6,6), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:24:0), (0,0,6), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(--) PCI:*(3:0:0) nVidia Corporation NV45 [GeForce 6800 GTO] rev 162, Mem @ 0xf5000000/24, 0xc0000000/28, 0xf4000000/24, BIOS @ 0xf66e0000/17
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B]
[1] -1 0 0xfe800000 - 0xfe9fffff (0x200000) MX[B]
[2] -1 0 0xf25fc000 - 0xf25fffff (0x4000) MX[B]
[3] -1 0 0xfebfa000 - 0xfebfafff (0x1000) MX[B]
[4] -1 0 0xfebfb000 - 0xfebfbfff (0x1000) MX[B]
[5] -1 0 0xfebfc000 - 0xfebfcfff (0x1000) MX[B]
[6] -1 0 0xfebfd000 - 0xfebfdfff (0x1000) MX[B]
[7] -1 0 0xfebffc00 - 0xfebffcff (0x100) MX[B]
[8] -1 0 0xfebfe000 - 0xfebfefff (0x1000) MX[B]
[9] -1 0 0xf66e0000 - 0xf66fffff (0x20000) MX[B](B)
[10] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B)
[11] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[12] -1 0 0xf5000000 - 0xf5ffffff (0x1000000) MX[B](B)
[13] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[B]
[14] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[15] -1 0 0x0000c480 - 0x0000c487 (0x8) IX[B]
[16] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[B]
[17] -1 0 0x0000c880 - 0x0000c883 (0x4) IX[B]
[18] -1 0 0x0000cc00 - 0x0000cc07 (0x8) IX[B]
[19] -1 0 0x0000d000 - 0x0000d003 (0x4) IX[B]
[20] -1 0 0x0000d080 - 0x0000d087 (0x8) IX[B]
[21] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[B]
[22] -1 0 0x0000d480 - 0x0000d483 (0x4) IX[B]
[23] -1 0 0x0000d800 - 0x0000d807 (0x8) IX[B]
[24] -1 0 0x0000d880 - 0x0000d883 (0x4) IX[B]
[25] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[B]
[26] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[27] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[28] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[29] -1 0 0x00000700 - 0x0000073f (0x40) IX[B]
[30] -1 0 0x00000600 - 0x0000063f (0x40) IX[B]
[31] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B]
[1] -1 0 0xfe800000 - 0xfe9fffff (0x200000) MX[B]
[2] -1 0 0xf25fc000 - 0xf25fffff (0x4000) MX[B]
[3] -1 0 0xfebfa000 - 0xfebfafff (0x1000) MX[B]
[4] -1 0 0xfebfb000 - 0xfebfbfff (0x1000) MX[B]
[5] -1 0 0xfebfc000 - 0xfebfcfff (0x1000) MX[B]
[6] -1 0 0xfebfd000 - 0xfebfdfff (0x1000) MX[B]
[7] -1 0 0xfebffc00 - 0xfebffcff (0x100) MX[B]
[8] -1 0 0xfebfe000 - 0xfebfefff (0x1000) MX[B]
[9] -1 0 0xf66e0000 - 0xf66fffff (0x20000) MX[B](B)
[10] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B)
[11] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[12] -1 0 0xf5000000 - 0xf5ffffff (0x1000000) MX[B](B)
[13] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[B]
[14] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[15] -1 0 0x0000c480 - 0x0000c487 (0x8) IX[B]
[16] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[B]
[17] -1 0 0x0000c880 - 0x0000c883 (0x4) IX[B]
[18] -1 0 0x0000cc00 - 0x0000cc07 (0x8) IX[B]
[19] -1 0 0x0000d000 - 0x0000d003 (0x4) IX[B]
[20] -1 0 0x0000d080 - 0x0000d087 (0x8) IX[B]
[21] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[B]
[22] -1 0 0x0000d480 - 0x0000d483 (0x4) IX[B]
[23] -1 0 0x0000d800 - 0x0000d807 (0x8) IX[B]
[24] -1 0 0x0000d880 - 0x0000d883 (0x4) IX[B]
[25] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[B]
[26] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[27] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[28] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[29] -1 0 0x00000700 - 0x0000073f (0x40) IX[B]
[30] -1 0 0x00000600 - 0x0000063f (0x40) IX[B]
[31] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B]
[5] -1 0 0xfe800000 - 0xfe9fffff (0x200000) MX[B]
[6] -1 0 0xf25fc000 - 0xf25fffff (0x4000) MX[B]
[7] -1 0 0xfebfa000 - 0xfebfafff (0x1000) MX[B]
[8] -1 0 0xfebfb000 - 0xfebfbfff (0x1000) MX[B]
[9] -1 0 0xfebfc000 - 0xfebfcfff (0x1000) MX[B]
[10] -1 0 0xfebfd000 - 0xfebfdfff (0x1000) MX[B]
[11] -1 0 0xfebffc00 - 0xfebffcff (0x100) MX[B]
[12] -1 0 0xfebfe000 - 0xfebfefff (0x1000) MX[B]
[13] -1 0 0xf66e0000 - 0xf66fffff (0x20000) MX[B](B)
[14] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B)
[15] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[16] -1 0 0xf5000000 - 0xf5ffffff (0x1000000) MX[B](B)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[B]
[20] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[21] -1 0 0x0000c480 - 0x0000c487 (0x8) IX[B]
[22] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[B]
[23] -1 0 0x0000c880 - 0x0000c883 (0x4) IX[B]
[24] -1 0 0x0000cc00 - 0x0000cc07 (0x8) IX[B]
[25] -1 0 0x0000d000 - 0x0000d003 (0x4) IX[B]
[26] -1 0 0x0000d080 - 0x0000d087 (0x8) IX[B]
[27] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[B]
[28] -1 0 0x0000d480 - 0x0000d483 (0x4) IX[B]
[29] -1 0 0x0000d800 - 0x0000d807 (0x8) IX[B]
[30] -1 0 0x0000d880 - 0x0000d883 (0x4) IX[B]
[31] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[B]
[32] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[33] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[34] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[35] -1 0 0x00000700 - 0x0000073f (0x40) IX[B]
[36] -1 0 0x00000600 - 0x0000063f (0x40) IX[B]
[37] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded by default.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.1
(II) NVIDIA GLX Module 169.12 Thu Feb 14 18:45:56 PST 2008
(II) Loading extension GLX
(II) LoadModule: "v4l"
(II) Loading /usr/lib/xorg/modules/drivers//v4l_drv.so
(II) Module v4l: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 0.1.1
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.0.90, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "nv"
(II) Loading /usr/lib/xorg/modules/drivers//nv_drv.so
(II) Module nv: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 2.1.8
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) v4l driver for Video4Linux
(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
GeForce Go 6600, GeForce Go 6600 GT, Quadro FX 550, Quadro FX 550,
Quadro FX 540, GeForce 6200, GeForce 6500,
GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 6800,
GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT, GeForce 6200,
GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7300 LE,
GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300, GeForce Go 7400,
GeForce Go 7400 GS, Quadro NVS 110M, Quadro NVS 120M, Quadro FX 350M,
GeForce 7500 LE, Quadro FX 350, GeForce 7300 GS, GeForce 7600 GT,
GeForce 7600 GS, GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT,
GeForce Go 7700, GeForce Go 7600, GeForce Go 7600 GT,
Quadro NVS 300M, GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560,
GeForce 7900 GTX, GeForce 7900 GT, GeForce 7900 GS,
GeForce Go 7900 GS, GeForce Go 7900 GTX, Quadro FX 2500M,
Quadro FX 1500M, Quadro FX 5500, Quadro FX 3500, Quadro FX 1500,
Quadro FX 4500 X2, GeForce 6150, GeForce 6150 LE, GeForce 6100,
GeForce Go 6150, GeForce Go 6100, GeForce 8800 GTX, GeForce 8800 GTS,
GeForce 8800 Ultra, Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS,
GeForce 8600 GT, GeForce 8600 GT, GeForce 8400 GS, GeForce 8600M GT,
GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce 8500 GT,
GeForce 8400 GS, GeForce 8300 GS, GeForce 8400 GS, GeForce 8600M GS,
GeForce 8400M GT, GeForce 8400M GS, GeForce 8400M G, Quadro NVS 140M,
Quadro NVS 130M, Quadro NVS 135M, Quadro FX 360M, Quadro NVS 290,
GeForce 8800 GT, GeForce 8800 GS, GeForce 8800 GS, GeForce 8800 GT,
Quadro FX 3700, GeForce 9600 GT, GeForce 8400 GS
(II) Primary Device is: PCI 03:00:0
(--) Chipset GeForce 6800 GT found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B]
[5] -1 0 0xfe800000 - 0xfe9fffff (0x200000) MX[B]
[6] -1 0 0xf25fc000 - 0xf25fffff (0x4000) MX[B]
[7] -1 0 0xfebfa000 - 0xfebfafff (0x1000) MX[B]
[8] -1 0 0xfebfb000 - 0xfebfbfff (0x1000) MX[B]
[9] -1 0 0xfebfc000 - 0xfebfcfff (0x1000) MX[B]
[10] -1 0 0xfebfd000 - 0xfebfdfff (0x1000) MX[B]
[11] -1 0 0xfebffc00 - 0xfebffcff (0x100) MX[B]
[12] -1 0 0xfebfe000 - 0xfebfefff (0x1000) MX[B]
[13] -1 0 0xf66e0000 - 0xf66fffff (0x20000) MX[B](B)
[14] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B)
[15] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[16] -1 0 0xf5000000 - 0xf5ffffff (0x1000000) MX[B](B)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[B]
[20] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[21] -1 0 0x0000c480 - 0x0000c487 (0x8) IX[B]
[22] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[B]
[23] -1 0 0x0000c880 - 0x0000c883 (0x4) IX[B]
[24] -1 0 0x0000cc00 - 0x0000cc07 (0x8) IX[B]
[25] -1 0 0x0000d000 - 0x0000d003 (0x4) IX[B]
[26] -1 0 0x0000d080 - 0x0000d087 (0x8) IX[B]
[27] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[B]
[28] -1 0 0x0000d480 - 0x0000d483 (0x4) IX[B]
[29] -1 0 0x0000d800 - 0x0000d807 (0x8) IX[B]
[30] -1 0 0x0000d880 - 0x0000d883 (0x4) IX[B]
[31] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[B]
[32] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[33] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[34] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[35] -1 0 0x00000700 - 0x0000073f (0x40) IX[B]
[36] -1 0 0x00000600 - 0x0000063f (0x40) IX[B]
[37] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B]
[5] -1 0 0xfe800000 - 0xfe9fffff (0x200000) MX[B]
[6] -1 0 0xf25fc000 - 0xf25fffff (0x4000) MX[B]
[7] -1 0 0xfebfa000 - 0xfebfafff (0x1000) MX[B]
[8] -1 0 0xfebfb000 - 0xfebfbfff (0x1000) MX[B]
[9] -1 0 0xfebfc000 - 0xfebfcfff (0x1000) MX[B]
[10] -1 0 0xfebfd000 - 0xfebfdfff (0x1000) MX[B]
[11] -1 0 0xfebffc00 - 0xfebffcff (0x100) MX[B]
[12] -1 0 0xfebfe000 - 0xfebfefff (0x1000) MX[B]
[13] -1 0 0xf66e0000 - 0xf66fffff (0x20000) MX[B](B)
[14] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B)
[15] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[16] -1 0 0xf5000000 - 0xf5ffffff (0x1000000) MX[B](B)
[17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[22] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[B]
[23] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[24] -1 0 0x0000c480 - 0x0000c487 (0x8) IX[B]
[25] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[B]
[26] -1 0 0x0000c880 - 0x0000c883 (0x4) IX[B]
[27] -1 0 0x0000cc00 - 0x0000cc07 (0x8) IX[B]
[28] -1 0 0x0000d000 - 0x0000d003 (0x4) IX[B]
[29] -1 0 0x0000d080 - 0x0000d087 (0x8) IX[B]
[30] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[B]
[31] -1 0 0x0000d480 - 0x0000d483 (0x4) IX[B]
[32] -1 0 0x0000d800 - 0x0000d807 (0x8) IX[B]
[33] -1 0 0x0000d880 - 0x0000d883 (0x4) IX[B]
[34] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[B]
[35] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[36] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[37] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[38] -1 0 0x00000700 - 0x0000073f (0x40) IX[B]
[39] -1 0 0x00000600 - 0x0000063f (0x40) IX[B]
[40] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[41] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[42] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) NV(0): Initializing int10
(II) NV(0): Primary V_BIOS segment is: 0xc000
(--) NV(0): Chipset: "GeForce 6800 GT"
(**) NV(0): Depth 24, (--) framebuffer bpp 32
(==) NV(0): RGB weight 888
(==) NV(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(==) NV(0): Using HW cursor
(--) NV(0): Linear framebuffer at 0xC0000000
(--) NV(0): MMIO registers at 0xF5000000
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) NV(0): I2C bus "DDC" initialized.
(II) NV(0): Probing for analog device on output A...
(--) NV(0): ...can't find one
(II) NV(0): Probing for analog device on output B...
(--) NV(0): ...can't find one
(II) NV(0): Probing for EDID on I2C bus A...
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(--) NV(0): DDC detected a DFP:
(II) NV(0): Manufacturer: NEC Model: 6685 Serial#: 16843009
(II) NV(0): Year: 2005 Week: 20
(II) NV(0): EDID Version: 1.3
(II) NV(0): Digital Display Input
(II) NV(0): Max H-Image Size [cm]: horiz.: 38 vert.: 30
(II) NV(0): Gamma: 2.20
(II) NV(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) NV(0): First detailed timing is preferred mode
(II) NV(0): redX: 0.640 redY: 0.329 greenX: 0.300 greenY: 0.600
(II) NV(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
(II) NV(0): Supported VESA Video Modes:
(II) NV(0): 720x400@70Hz
(II) NV(0): 640x480@60Hz
(II) NV(0): 640x480@67Hz
(II) NV(0): 640x480@72Hz
(II) NV(0): 640x480@75Hz
(II) NV(0): 800x600@56Hz
(II) NV(0): 800x600@60Hz
(II) NV(0): 800x600@72Hz
(II) NV(0): 800x600@75Hz
(II) NV(0): 832x624@75Hz
(II) NV(0): 1024x768@60Hz
(II) NV(0): 1024x768@70Hz
(II) NV(0): 1024x768@75Hz
(II) NV(0): 1280x1024@75Hz
(II) NV(0): 1152x870@75Hz
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported Future Video Modes:
(II) NV(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) NV(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) NV(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 108.0 MHz Image Size: 376 x 301 mm
(II) NV(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) NV(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) NV(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 140 MHz
(II) NV(0): Monitor name: LCD1970GX
(II) NV(0): Serial No: 55111259YA
(II) NV(0): EDID (in hex):
(II) NV(0): 00ffffffffffff0038a3856601010101
(II) NV(0): 140f010380261e78eade95a3544c9926
(II) NV(0): 0f5054bfef80714f8140818001010101
(II) NV(0): 010101010101302a009851002a403070
(II) NV(0): 1300782d1100001e000000fd00384b1f
(II) NV(0): 510e000a202020202020000000fc004c
(II) NV(0): 43443139373047580a202020000000ff
(II) NV(0): 00353531313132353959410a202000e8
(II) NV(0): Probing for EDID on I2C bus B...
(II) NV(0): I2C device "DDC:ddc2" removed.
(II) NV(0): ... none found
(--) NV(0): CRTC 0 is currently programmed for DFP
(II) NV(0): Using DFP on CRTC 0
(--) NV(0): Panel size is 1280 x 1024
(II) NV(0): EDID vendor "NEC", prod id 26245
(II) NV(0): Using hsync ranges from config file
(II) NV(0): Using vrefresh ranges from config file
(II) NV(0): Printing DDC gathered Modelines:
(II) NV(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NV(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NV(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NV(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NV(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) NV(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) NV(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NV(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NV(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NV(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) NV(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NV(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NV(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) NV(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NV(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NV(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NV(0): Modeline "1152x864"x74.8 104.00 1152 1224 1344 1536 864 867 871 905 -hsync +vsync (67.7 kHz)
(II) NV(0): Modeline "1280x960"x59.9 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync (59.7 kHz)
(II) NV(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
(II) NV(0): Panel is TMDS
(--) NV(0): VideoRAM: 262144 kBytes
(**) NV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) NV(0): Configured Monitor: Using hsync range of 31.50-74.70 kHz
(II) NV(0): Configured Monitor: Using vrefresh range of 56.00-65.00 Hz
(II) NV(0): Configured Monitor: Using maximum pixel clock of 140.00 MHz
(II) NV(0): Clock range: 12.00 to 400.00 MHz
(II) NV(0): Not using mode "1400x1050@60" (exceeds panel dimensions)
(II) NV(0): Not using mode "1600x1200@60" (exceeds panel dimensions)
(II) NV(0): Not using default mode "640x350" (vrefresh out of range)
(II) NV(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x400" (vrefresh out of range)
(II) NV(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "720x400" (vrefresh out of range)
(II) NV(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x480" (vrefresh out of range)
(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x480" (vrefresh out of range)
(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x480" (vrefresh out of range)
(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "800x600" (vrefresh out of range)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "800x600" (vrefresh out of range)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "800x600" (vrefresh out of range)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (vrefresh out of range)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (vrefresh out of range)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (vrefresh out of range)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1152x864" (vrefresh out of range)
(II) NV(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1280x960" (hsync out of range)
(II) NV(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1280x1024" (hsync out of range)
(II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1280x1024" (hsync out of range)
(II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) NV(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) NV(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1856x1392" (width too large for virtual size)
(II) NV(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1856x1392" (width too large for virtual size)
(II) NV(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "832x624" (vrefresh out of range)
(II) NV(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x400" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1152x768" (vrefresh out of range)
(II) NV(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1152x864" (hsync out of range)
(II) NV(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) NV(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) NV(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) NV(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) NV(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1440x900" (exceeds panel dimensions)
(II) NV(0): Not using default mode "720x450" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1600x1024" (exceeds panel dimensions)
(II) NV(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1680x1050" (width too large for virtual size)
(II) NV(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1920x1200" (width too large for virtual size)
(II) NV(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1920x1200" (width too large for virtual size)
(II) NV(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using driver mode "640x480" (vrefresh out of range)
(II) NV(0): Not using driver mode "640x480" (vrefresh out of range)
(II) NV(0): Not using driver mode "640x480" (vrefresh out of range)
(II) NV(0): Not using driver mode "720x400" (vrefresh out of range)
(II) NV(0): Not using driver mode "1280x1024" (hsync out of range)
(II) NV(0): Not using driver mode "1024x768" (vrefresh out of range)
(II) NV(0): Not using driver mode "1024x768" (vrefresh out of range)
(II) NV(0): Not using driver mode "832x624" (vrefresh out of range)
(II) NV(0): Not using driver mode "800x600" (vrefresh out of range)
(II) NV(0): Not using driver mode "800x600" (vrefresh out of range)
(II) NV(0): Not using driver mode "1152x864" (vrefresh out of range)
(II) NV(0): Not using driver mode "1152x864" (vrefresh out of range)
(II) NV(0): Not using mode "1400x1050@60" (no mode of this name)
(II) NV(0): Not using mode "1600x1200@60" (no mode of this name)
(**) NV(0): Virtual size is 1600x1200 (pitch 1600)
(**) NV(0): *Mode "1280x1024@60": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x1024@60"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(**) NV(0): *Mode "1280x960@60": 102.1 MHz, 59.6 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x960@60"x60.0 102.10 1280 1360 1496 1712 960 961 964 994 -hsync +vsync (59.6 kHz)
(**) NV(0): *Mode "1024x768@60": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) NV(0): Modeline "1024x768@60"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(**) NV(0): *Mode "800x600@60": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) NV(0): Modeline "800x600@60"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(**) NV(0): *Mode "800x600@56": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) NV(0): Modeline "800x600@56"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(**) NV(0): *Mode "640x480@60": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) NV(0): Modeline "640x480@60"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(**) NV(0): Driver mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(**) NV(0): Driver mode "1280x1024": 109.0 MHz, 63.7 kHz, 59.9 Hz
(II) NV(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
(**) NV(0): Driver mode "1280x1024": 90.8 MHz, 63.0 kHz, 59.8 Hz
(II) NV(0): Modeline "1280x1024"x59.8 90.75 1280 1328 1360 1440 1024 1027 1034 1054 +hsync -vsync (63.0 kHz)
(**) NV(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(**) NV(0): Driver mode "1280x960": 101.2 MHz, 59.7 kHz, 59.9 Hz
(II) NV(0): Modeline "1280x960"x59.9 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync (59.7 kHz)
(**) NV(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(**) NV(0): Default mode "1280x800": 83.5 MHz, 49.7 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x800"x60.0 83.46 1280 1344 1480 1680 800 801 804 828 (49.7 kHz)
(**) NV(0): Default mode "1280x768": 80.1 MHz, 47.7 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x768"x60.0 80.14 1280 1344 1480 1680 768 769 772 795 (47.7 kHz)
(**) NV(0): Driver mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) NV(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(**) NV(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) NV(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(**) NV(0): Driver mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) NV(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(**) NV(0): Driver mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) NV(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(**) NV(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) NV(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(**) NV(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) NV(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(**) NV(0): Driver mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) NV(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(**) NV(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) NV(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(**) NV(0): Display dimensions: (380, 300) mm
(**) NV(0): DPI set to (106, 101)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.2.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B]
[1] 0 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B]
[2] 0 0 0xf5000000 - 0xf5ffffff (0x1000000) MX[B]
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B]
[8] -1 0 0xfe800000 - 0xfe9fffff (0x200000) MX[B]
[9] -1 0 0xf25fc000 - 0xf25fffff (0x4000) MX[B]
[10] -1 0 0xfebfa000 - 0xfebfafff (0x1000) MX[B]
[11] -1 0 0xfebfb000 - 0xfebfbfff (0x1000) MX[B]
[12] -1 0 0xfebfc000 - 0xfebfcfff (0x1000) MX[B]
[13] -1 0 0xfebfd000 - 0xfebfdfff (0x1000) MX[B]
[14] -1 0 0xfebffc00 - 0xfebffcff (0x100) MX[B]
[15] -1 0 0xfebfe000 - 0xfebfefff (0x1000) MX[B]
[16] -1 0 0xf66e0000 - 0xf66fffff (0x20000) MX[B](B)
[17] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B)
[18] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[19] -1 0 0xf5000000 - 0xf5ffffff (0x1000000) MX[B](B)
[20] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[21] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[22] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[24] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[25] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[B]
[26] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[27] -1 0 0x0000c480 - 0x0000c487 (0x8) IX[B]
[28] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[B]
[29] -1 0 0x0000c880 - 0x0000c883 (0x4) IX[B]
[30] -1 0 0x0000cc00 - 0x0000cc07 (0x8) IX[B]
[31] -1 0 0x0000d000 - 0x0000d003 (0x4) IX[B]
[32] -1 0 0x0000d080 - 0x0000d087 (0x8) IX[B]
[33] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[B]
[34] -1 0 0x0000d480 - 0x0000d483 (0x4) IX[B]
[35] -1 0 0x0000d800 - 0x0000d807 (0x8) IX[B]
[36] -1 0 0x0000d880 - 0x0000d883 (0x4) IX[B]
[37] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[B]
[38] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[39] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[40] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[41] -1 0 0x00000700 - 0x0000073f (0x40) IX[B]
[42] -1 0 0x00000600 - 0x0000063f (0x40) IX[B]
[43] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[44] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[45] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) NV(0): Write-combining range (0xc0000000,0x10000000)
(II) NV(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(==) NV(0): Backing store disabled
(==) NV(0): Silken mouse enabled
(II) NV(0): DPMS enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
(WW) Configured Mouse: No Device specified, looking for one...
(II) Configured Mouse: Setting Device option to "/dev/input/mice"
(--) Configured Mouse: Device: "/dev/input/mice"
(==) Configured Mouse: Protocol: "Auto"
(**) Option "CorePointer"
(**) Configured Mouse: always reports core events
(**) Option "Device" "/dev/input/mice"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(**) Configured Mouse: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) Generic Keyboard: always reports core events
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Generic Keyboard: XkbLayout: "us"
(**) Option "XkbOptions" "lv3:ralt_switch"
(**) Generic Keyboard: XkbOptions: "lv3:ralt_switch"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(II) evaluating device (Generic Keyboard)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
(II) evaluating device (Configured Mouse)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(--) Configured Mouse: PnP-detected protocol: "ExplorerPS/2"
(II) Configured Mouse: ps2EnableDataReporting: succeeded
SetClientVersion: 0 9
SebastienC
Level 1
Level 1
 
Posts: 9
Joined: Mon Nov 03, 2008 3:34 pm

Re: Resolution stuck at 800x600

Postby 67GTA on Mon Nov 03, 2008 7:16 pm

It is using the "nv" driver instead of the "nvidia" driver. Try installing your nvidia driver with Envy. I have had mixed results with the Ubuntu driver manager.
"The only thing necessary for the triumph of evil is for good men to do nothing." Edmund Burke
User avatar
67GTA
Level 6
Level 6
 
Posts: 1301
Joined: Wed Jun 06, 2007 9:49 pm
Location: Kentucky, USA

Re: Resolution stuck at 800x600

Postby SebastienC on Mon Nov 03, 2008 7:25 pm

Well I have the same problem even if I install the driver with Envy , did it several times ( with the latest versions )
SebastienC
Level 1
Level 1
 
Posts: 9
Joined: Mon Nov 03, 2008 3:34 pm

Re: Resolution stuck at 800x600

Postby 67GTA on Mon Nov 03, 2008 7:37 pm

Try
Code: Select all
nvidia-xconfig
as root in a terminal and reboot. It should amend your xorg file with the correct settings. If that doesn't work, we will have to help you write a custom xorg.conf file.
"The only thing necessary for the triumph of evil is for good men to do nothing." Edmund Burke
User avatar
67GTA
Level 6
Level 6
 
Posts: 1301
Joined: Wed Jun 06, 2007 9:49 pm
Location: Kentucky, USA

Re: Resolution stuck at 800x600

Postby 67GTA on Mon Nov 03, 2008 8:33 pm

Just to be sure, check to see if the module is even being loaded with
Code: Select all
lsmod | grep nvidia
"The only thing necessary for the triumph of evil is for good men to do nothing." Edmund Burke
User avatar
67GTA
Level 6
Level 6
 
Posts: 1301
Joined: Wed Jun 06, 2007 9:49 pm
Location: Kentucky, USA

Re: Resolution stuck at 800x600

Postby SebastienC on Tue Nov 04, 2008 3:40 pm

67GTA wrote:Try
Code: Select all
nvidia-xconfig
as root in a terminal and reboot. It should amend your xorg file with the correct settings. If that doesn't work, we will have to help you write a custom xorg.conf file.


heres what I got

Using X configuration file: "/etc/X11/xorg.conf".

WARNING: The CorePointer device was not specified explicitly in the layout;
using the first mouse device.


WARNING: The CoreKeyboard device was not specified explicitly in the layout;
using the first keyboard device.

Backed up file '/etc/X11/xorg.conf' as '/etc/X11/xorg.conf.backup'
New X configuration file written to '/etc/X11/xorg.conf'
SebastienC
Level 1
Level 1
 
Posts: 9
Joined: Mon Nov 03, 2008 3:34 pm

Re: Resolution stuck at 800x600

Postby SebastienC on Tue Nov 04, 2008 3:40 pm

67GTA wrote:Just to be sure, check to see if the module is even being loaded with
Code: Select all
lsmod | grep nvidia


heres what i got :

nvidia 7106084 0
agpgart 34760 1 nvidia
i2c_core 24832 2 nvidia,i2c_nforce2
sebastien@sebastien-desktop ~ $ sudo nvidia-xconfig
SebastienC
Level 1
Level 1
 
Posts: 9
Joined: Mon Nov 03, 2008 3:34 pm

Re: Resolution stuck at 800x600

Postby 67GTA on Tue Nov 04, 2008 3:44 pm

Nvidia-xconfig should have written a new xorg.conf file. Post a copy of it. It is in /etc/X11/xorg.conf
"The only thing necessary for the triumph of evil is for good men to do nothing." Edmund Burke
User avatar
67GTA
Level 6
Level 6
 
Posts: 1301
Joined: Wed Jun 06, 2007 9:49 pm
Location: Kentucky, USA

Re: Resolution stuck at 800x600

Postby SebastienC on Tue Nov 04, 2008 4:01 pm

heres my xorg and btw thanks for your time 67gta


# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by failsafeDexconf, using
# values from the debconf database and some overrides to use vesa mode.
#
# You should use dexconf or another such tool for creating a "real" xorg.conf
# For example:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "Emulate3Buttons" "true"
EndSection

Section "Device"
Identifier "Configured Video Device"
Boardname "vesa"
Busid "PCI:3:0:0"
Driver "vesa"
Screen 0
EndSection

Section "Monitor"
Identifier "Configured Monitor"
Vendorname "Generic LCD Display"
Modelname "LCD Panel 1280x1024"
Horizsync 31.5-64.0
Vertrefresh 56.0 - 65.0
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
modeline "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
modeline "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
modeline "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
Gamma 1.0
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
Defaultdepth 24
SubSection "Display"
Depth 24
Virtual 1280 1024
Modes "1280x1024@60" "1280x960@60" "1024x768@60" "800x600@60" "800x600@56" "640x480@60"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
screen 0 "Default Screen" 0 0
EndSection
Section "Module"
Load "glx"
Load "GLcore"
Load "v4l"
EndSection
Section "device" #
Identifier "device1"
Boardname "vesa"
Busid "PCI:3:0:0"
Driver "vesa"
Screen 1
EndSection
Section "screen" #
Identifier "screen1"
Device "device1"
Defaultdepth 24
Monitor "monitor1"
SubSection "Display"
Depth 24
Modes "640x480@60"
EndSubSection
EndSection
Section "monitor" #
Identifier "monitor1"
Vendorname "Plug 'n' Play"
Modelname "Plug 'n' Play"
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
Gamma 1.0
EndSection
Section "ServerFlags"
EndSection
SebastienC
Level 1
Level 1
 
Posts: 9
Joined: Mon Nov 03, 2008 3:34 pm

Re: Resolution stuck at 800x600

Postby SebastienC on Tue Nov 04, 2008 4:05 pm

Because Im a Linux newbie I ran gksu displayconfig-gtk at the beginning and you said to use Su instead of gkdu and I used sudo instead is this correct? because Su didnt worked
SebastienC
Level 1
Level 1
 
Posts: 9
Joined: Mon Nov 03, 2008 3:34 pm

Re: Resolution stuck at 800x600

Postby 67GTA on Tue Nov 04, 2008 4:39 pm

Su lets you stay as root until you exit the terminal. Sudo will give you root powers for one command only, so there is no real difference in this case. It seems xorg is using the vesa driver. Try changing your xorg.conf file from this:

Code: Select all
Section "Device"
Identifier "Configured Video Device"
Boardname "vesa"
Busid "PCI:3:0:0"
Driver "vesa"
Screen 0
EndSection

To this:

Code: Select all
Section "Device"
Identifier "Configured Video Device"
Boardname "vesa"
Busid "PCI:3:0:0"
Driver "nvidia"
Screen 0
EndSection

Although this worries me:

Code: Select all
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by failsafeDexconf, using
# values from the debconf database and some overrides to use vesa mode.


If nvidia-xconfig had created the new xorg file, it would have said "created by nvidia-xconfig". If changing the driver in xorg doesn't get the desired results, you might have to try installing the driver manually from Nvidia. Is this a regular GeForce, or a GeForce GO?
"The only thing necessary for the triumph of evil is for good men to do nothing." Edmund Burke
User avatar
67GTA
Level 6
Level 6
 
Posts: 1301
Joined: Wed Jun 06, 2007 9:49 pm
Location: Kentucky, USA

Re: Resolution stuck at 800x600

Postby SebastienC on Tue Nov 04, 2008 4:54 pm

regular
SebastienC
Level 1
Level 1
 
Posts: 9
Joined: Mon Nov 03, 2008 3:34 pm

Re: Resolution stuck at 800x600

Postby SebastienC on Tue Nov 04, 2008 5:02 pm

Ok when im done changing the values , I cant save the file with the text editor ,( persmission error ) how can I bypass this?
SebastienC
Level 1
Level 1
 
Posts: 9
Joined: Mon Nov 03, 2008 3:34 pm

Re: Resolution stuck at 800x600

Postby 67GTA on Tue Nov 04, 2008 5:09 pm

The easiest way is to run
Code: Select all
sudo gedit /etc/X11/xorg.conf
in a terminal. This will open xorg.conf in gedit with root powers. Only root has the power to edit files in /. Everything in /home is yours.
"The only thing necessary for the triumph of evil is for good men to do nothing." Edmund Burke
User avatar
67GTA
Level 6
Level 6
 
Posts: 1301
Joined: Wed Jun 06, 2007 9:49 pm
Location: Kentucky, USA

Re: Resolution stuck at 800x600

Postby celtic426 on Thu Nov 06, 2008 1:32 am

Hey dude I had a similar problem and I think I have a fix for you. Download and install the drivers. Then go to Administration--> Nvidia X Server Settings. In this click "X Server Display Configuration". Set the resolution there. Now click save to X Configuration File near the bottom. But do not click OK. Click preview, then copy and paste all that and replace the contents of "/etc/X11/xorg.conf" with the text in the preview. That should do it.
celtic426
Level 1
Level 1
 
Posts: 42
Joined: Sun Nov 02, 2008 10:03 pm

Linux Mint is funded by ads and donations.
 

Return to Newbie Questions

Who is online

Users browsing this forum: Google Adsense [Bot], Reorx, rokytnji and 47 guests