I setup Mint yesterday. I've broadcom wireless drivers.
Code: Select all
lspci | grep -i network
03:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 02)Code: Select all
uname -r
2.6.32-24-generic
Thanks.
b43 mac suspend failed
Forum rules
There are no such things as "stupid" questions. However if you think your question is a bit stupid, then this is the right place for you to post it. Stick to easy to-the-point questions that you feel people can answer fast. For long and complicated questions use the other forums in the support section.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
There are no such things as "stupid" questions. However if you think your question is a bit stupid, then this is the right place for you to post it. Stick to easy to-the-point questions that you feel people can answer fast. For long and complicated questions use the other forums in the support section.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
-
yaami
b43 mac suspend failed
Hi all,
I setup Mint yesterday. I've broadcom wireless drivers.
I had this problem and was not able to connect to the internet twice. I tried rebooting and it worked the third time. I do not know how the problem can be fixed, in-case it shows up again. the dmesg had this line b43 mac suspend failed. Unfortunately I did not save the log from that time. Has anyone experienced this problem before and how to fix this if it should show up again. I know I did not provide enough information, I just wanted to take chance if someone has had this problem before.
Thanks.
I setup Mint yesterday. I've broadcom wireless drivers.
Thanks.
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 1 time in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
-
yaami
Re: b43 mac suspend failed
Hi all,
I had this problem again. I'm posting my complete dmesg here,
This is part of the above message which shows the problem with b43.
Hope this info helps someone to help me resolve this issue.
Thanks.
I had this problem again. I'm posting my complete dmesg here,
Code: Select all
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-24-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #39-Ubuntu SMP Wed Jul 28 06:07:29 UTC 2010 (Ubuntu 2.6.32-24.39-generic 2.6.32.15+drm33.5)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003bf50000 (usable)
[ 0.000000] BIOS-e820: 000000003bf50000 - 000000003bf65000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003bf65000 - 000000003bf66000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003bf66000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x3bf50 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-E3FFF uncachable
[ 0.000000] E4000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009e000 (usable)
[ 0.000000] modified: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000d2000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003bf50000 (usable)
[ 0.000000] modified: 000000003bf50000 - 000000003bf65000 (ACPI data)
[ 0.000000] modified: 000000003bf65000 - 000000003bf66000 (ACPI NVS)
[ 0.000000] modified: 000000003bf66000 - 0000000040000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 2c2a8000 - 2cfbb0fd
[ 0.000000] ACPI: RSDP 000f8250 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 3bf5c0ce 0006C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 3bf649ba 000F4 (v03 NVIDIA MCP67-M 06040000 PTL_ 000F4240)
[ 0.000000] ACPI: DSDT 3bf5c13a 0880C (v01 NVIDIA MCP67 06040000 MSFT 03000000)
[ 0.000000] ACPI: FACS 3bf65fc0 00040
[ 0.000000] ACPI: TCPA 3bf64aae 00032 (v01 Phoeni x 06040000 TL 00000000)
[ 0.000000] ACPI: SRAT 3bf64ae0 000A0 (v01 AMD HAMMER 06040000 AMD 00000001)
[ 0.000000] ACPI: SSDT 3bf64b80 00206 (v01 PTLTD POWERNOW 06040000 LTP 00000001)
[ 0.000000] ACPI: MCFG 3bf64d86 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: HPET 3bf64dc2 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
[ 0.000000] ACPI: APIC 3bf64dfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 3bf64e62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 3bf64e8a 00176 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 71MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008dbeb8] TEXT DATA BSS ==> [0000100000 - 00008dbeb8]
[ 0.000000] #4 [002c2a8000 - 002cfbb0fd] RAMDISK ==> [002c2a8000 - 002cfbb0fd]
[ 0.000000] #5 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000]
[ 0.000000] #6 [00008dc000 - 00008df150] BRK ==> [00008dc000 - 00008df150]
[ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] found SMP MP-table at [c00f8220] f8220
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003bf50
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0003bf50
[ 0.000000] On node 0 totalpages: 245482
[ 0.000000] free_area_init_node: node 0, pgdat c0798780, node_mem_map c1001000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3962 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 143 pages used for memmap
[ 0.000000] HighMem zone: 18115 pages, LIFO batch:3
[ 0.000000] Using APIC driver default
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s36056 r0 d21288 u2097152
[ 0.000000] pcpu-alloc: s36056 r0 d21288 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243563
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-24-generic root=UUID=23414442-650e-4943-ba51-3731a247ef90 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 4911680 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003bf50)
[ 0.000000] Memory: 946644k/982336k available (4679k kernel code, 34892k reserved, 2116k data, 660k init, 73032k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a3000 - 0xc0848000 ( 660 kB)
[ 0.000000] .data : 0xc0591d43 - 0xc07a2e88 (2116 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0591d43 (4679 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1900.292 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3800.58 BogoMIPS (lpj=7601168)
[ 0.004023] Security Framework initialized
[ 0.004044] AppArmor: AppArmor initialized
[ 0.004052] Mount-cache hash table entries: 512
[ 0.004179] Initializing cgroup subsys ns
[ 0.004183] Initializing cgroup subsys cpuacct
[ 0.004187] Initializing cgroup subsys memory
[ 0.004194] Initializing cgroup subsys devices
[ 0.004197] Initializing cgroup subsys freezer
[ 0.004200] Initializing cgroup subsys net_cls
[ 0.004219] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004222] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004225] CPU: Physical Processor ID: 0
[ 0.004227] CPU: Processor Core ID: 0
[ 0.004231] mce: CPU supports 5 MCE banks
[ 0.004241] using C1E aware idle routine
[ 0.004249] Performance Events: AMD PMU driver.
[ 0.004255] ... version: 0
[ 0.004258] ... bit width: 48
[ 0.004260] ... generic registers: 4
[ 0.004262] ... value mask: 0000ffffffffffff
[ 0.004265] ... max period: 00007fffffffffff
[ 0.004267] ... fixed-purpose events: 0
[ 0.004269] ... event mask: 000000000000000f
[ 0.004273] Checking 'hlt' instruction... OK.
[ 0.022326] ACPI: Core revision 20090903
[ 0.036010] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.036016] ftrace: allocating 21780 entries in 43 pages
[ 0.040088] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.040560] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.083197] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-58 stepping 01
[ 0.084001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.008000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.168106] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-58 stepping 01
[ 0.168136] Brought up 2 CPUs
[ 0.168139] Total of 2 processors activated (7600.95 BogoMIPS).
[ 0.168135] System has AMD C1E enabled
[ 0.168135] Switch to broadcast mode on CPU1
[ 0.168373] CPU0 attaching sched-domain:
[ 0.168377] domain 0: span 0-1 level MC
[ 0.168380] groups: 0 1
[ 0.168385] CPU1 attaching sched-domain:
[ 0.168388] domain 0: span 0-1 level MC
[ 0.168391] groups: 1 0
[ 0.168476] Switch to broadcast mode on CPU0
[ 0.168476] devtmpfs: initialized
[ 0.168476] regulator: core version 0.5
[ 0.168476] Time: 0:10:18 Date: 08/10/10
[ 0.168476] NET: Registered protocol family 16
[ 0.168476] Trying to unpack rootfs image as initramfs...
[ 0.168476] EISA bus registered
[ 0.168476] ACPI: bus type pci registered
[ 0.168476] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 4
[ 0.168476] PCI: MCFG area at e0000000 reserved in E820
[ 0.168476] PCI: Using MMCONFIG for extended config space
[ 0.168476] PCI: Using configuration type 1 for base access
[ 0.172117] bio: create slab <bio-0> at 0
[ 0.172938] ACPI: EC: Look up EC in DSDT
[ 0.175666] ACPI: BIOS _OSI(Linux) query ignored
[ 0.176496] ACPI: Interpreter enabled
[ 0.176508] ACPI: (supports S0 S3 S4 S5)
[ 0.176529] ACPI: Using IOAPIC for interrupt routing
[ 0.183721] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
[ 0.184095] ACPI: No dock devices found.
[ 0.184316] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.184537] pci 0000:00:01.1: reg 10 io port: [0x3080-0x30bf]
[ 0.184550] pci 0000:00:01.1: reg 20 io port: [0x3040-0x307f]
[ 0.184555] pci 0000:00:01.1: reg 24 io port: [0x3000-0x303f]
[ 0.184576] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.184582] pci 0000:00:01.1: PME# disabled
[ 0.184640] pci 0000:00:01.3: reg 10 32bit mmio: [0xf6200000-0xf627ffff]
[ 0.184722] pci 0000:00:02.0: reg 10 32bit mmio: [0xf6486000-0xf6486fff]
[ 0.184747] pci 0000:00:02.0: supports D1 D2
[ 0.184749] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.184754] pci 0000:00:02.0: PME# disabled
[ 0.184778] pci 0000:00:02.1: reg 10 32bit mmio: [0xf6489000-0xf64890ff]
[ 0.184807] pci 0000:00:02.1: supports D1 D2
[ 0.184810] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.184815] pci 0000:00:02.1: PME# disabled
[ 0.184843] pci 0000:00:04.0: reg 10 32bit mmio: [0xf6487000-0xf6487fff]
[ 0.184868] pci 0000:00:04.0: supports D1 D2
[ 0.184870] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.184875] pci 0000:00:04.0: PME# disabled
[ 0.184899] pci 0000:00:04.1: reg 10 32bit mmio: [0xf6489400-0xf64894ff]
[ 0.184929] pci 0000:00:04.1: supports D1 D2
[ 0.184931] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.184936] pci 0000:00:04.1: PME# disabled
[ 0.184972] pci 0000:00:06.0: reg 20 io port: [0x30c0-0x30cf]
[ 0.185012] pci 0000:00:07.0: reg 10 32bit mmio: [0xf6480000-0xf6483fff]
[ 0.185041] pci 0000:00:07.0: PME# supported from D3hot D3cold
[ 0.185045] pci 0000:00:07.0: PME# disabled
[ 0.185113] pci 0000:00:09.0: reg 10 io port: [0x30f0-0x30f7]
[ 0.185118] pci 0000:00:09.0: reg 14 io port: [0x30e4-0x30e7]
[ 0.185123] pci 0000:00:09.0: reg 18 io port: [0x30e8-0x30ef]
[ 0.185128] pci 0000:00:09.0: reg 1c io port: [0x30e0-0x30e3]
[ 0.185133] pci 0000:00:09.0: reg 20 io port: [0x30d0-0x30df]
[ 0.185138] pci 0000:00:09.0: reg 24 32bit mmio: [0xf6484000-0xf6485fff]
[ 0.185190] pci 0000:00:0a.0: reg 10 32bit mmio: [0xf6488000-0xf6488fff]
[ 0.185195] pci 0000:00:0a.0: reg 14 io port: [0x30f8-0x30ff]
[ 0.185200] pci 0000:00:0a.0: reg 18 32bit mmio: [0xf6489c00-0xf6489cff]
[ 0.185206] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xf6489800-0xf648980f]
[ 0.185229] pci 0000:00:0a.0: supports D1 D2
[ 0.185232] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.185237] pci 0000:00:0a.0: PME# disabled
[ 0.185280] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.185284] pci 0000:00:0c.0: PME# disabled
[ 0.185324] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.185328] pci 0000:00:0d.0: PME# disabled
[ 0.185352] pci 0000:00:12.0: reg 10 32bit mmio: [0xf5000000-0xf5ffffff]
[ 0.185359] pci 0000:00:12.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.185366] pci 0000:00:12.0: reg 1c 64bit mmio: [0xf4000000-0xf4ffffff]
[ 0.185372] pci 0000:00:12.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.185495] pci 0000:02:05.0: reg 10 32bit mmio: [0x000000-0x0007ff]
[ 0.185530] pci 0000:02:05.0: supports D1 D2
[ 0.185533] pci 0000:02:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.185537] pci 0000:02:05.0: PME# disabled
[ 0.185563] pci 0000:02:05.1: reg 10 32bit mmio: [0xf6100800-0xf61008ff]
[ 0.185598] pci 0000:02:05.1: supports D1 D2
[ 0.185601] pci 0000:02:05.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.185606] pci 0000:02:05.1: PME# disabled
[ 0.185632] pci 0000:02:05.2: reg 10 32bit mmio: [0xf6100c00-0xf6100cff]
[ 0.185666] pci 0000:02:05.2: supports D1 D2
[ 0.185669] pci 0000:02:05.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.185674] pci 0000:02:05.2: PME# disabled
[ 0.185700] pci 0000:02:05.3: reg 10 32bit mmio: [0xf6101000-0xf61010ff]
[ 0.185734] pci 0000:02:05.3: supports D1 D2
[ 0.185737] pci 0000:02:05.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.185742] pci 0000:02:05.3: PME# disabled
[ 0.185768] pci 0000:02:05.4: reg 10 32bit mmio: [0xf6101400-0xf61014ff]
[ 0.185802] pci 0000:02:05.4: supports D1 D2
[ 0.185805] pci 0000:02:05.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.185810] pci 0000:02:05.4: PME# disabled
[ 0.185843] pci 0000:00:08.0: transparent bridge
[ 0.185848] pci 0000:00:08.0: bridge 32bit mmio: [0xf6100000-0xf61fffff]
[ 0.185887] pci 0000:00:0c.0: bridge io port: [0x4000-0x4fff]
[ 0.185891] pci 0000:00:0c.0: bridge 32bit mmio: [0xf2000000-0xf3ffffff]
[ 0.185896] pci 0000:00:0c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff]
[ 0.185937] pci 0000:03:00.0: reg 10 64bit mmio: [0xf6000000-0xf6003fff]
[ 0.185984] pci 0000:03:00.0: supports D1 D2
[ 0.186035] pci 0000:00:0d.0: bridge 32bit mmio: [0xf6000000-0xf60fffff]
[ 0.186045] pci_bus 0000:00: on NUMA node 0
[ 0.186050] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.186148] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
[ 0.186173] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
[ 0.186210] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
[ 0.220168] ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *10
[ 0.220365] ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *11
[ 0.220557] ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *0, disabled.
[ 0.220747] ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled.
[ 0.220938] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled.
[ 0.221129] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled.
[ 0.221321] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled.
[ 0.221512] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *10
[ 0.221703] ACPI: PCI Interrupt Link [LSMB] (IRQs *10)
[ 0.221894] ACPI: PCI Interrupt Link [LUS0] (IRQs 18) *11
[ 0.222085] ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7
[ 0.222277] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *11
[ 0.222471] ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *10
[ 0.222661] ACPI: PCI Interrupt Link [LGPU] (IRQs 16) *10
[ 0.222851] ACPI: PCI Interrupt Link [LPID] (IRQs 22) *0, disabled.
[ 0.223044] ACPI: PCI Interrupt Link [LSI0] (IRQs 23) *11
[ 0.223236] ACPI: PCI Interrupt Link [Z018] (IRQs 18) *5
[ 0.223427] ACPI: PCI Interrupt Link [Z019] (IRQs 22) *10
[ 0.223618] ACPI: PCI Interrupt Link [LPMU] (IRQs *11)
[ 0.223742] vgaarb: device added: PCI:0000:00:12.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.223750] vgaarb: loaded
[ 0.223874] SCSI subsystem initialized
[ 0.223978] libata version 3.00 loaded.
[ 0.224071] usbcore: registered new interface driver usbfs
[ 0.224085] usbcore: registered new interface driver hub
[ 0.224112] usbcore: registered new device driver usb
[ 0.224281] ACPI: WMI: Mapper loaded
[ 0.224283] PCI: Using ACPI for IRQ routing
[ 0.224460] NetLabel: Initializing
[ 0.224462] NetLabel: domain hash size = 128
[ 0.224464] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.224479] NetLabel: unlabeled traffic allowed by default
[ 0.224515] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.224521] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.232040] Switching to clocksource hpet
[ 0.233985] AppArmor: AppArmor Filesystem Enabled
[ 0.234006] pnp: PnP ACPI init
[ 0.234024] ACPI: bus type pnp registered
[ 0.237089] pnp: PnP ACPI: found 12 devices
[ 0.237091] ACPI: ACPI bus type pnp unregistered
[ 0.237095] PnPBIOS: Disabled by ACPI PNP
[ 0.237109] system 00:02: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.237116] system 00:03: ioport range 0x1000-0x107f has been reserved
[ 0.237119] system 00:03: ioport range 0x1080-0x10ff has been reserved
[ 0.237122] system 00:03: ioport range 0x1400-0x147f has been reserved
[ 0.237126] system 00:03: ioport range 0x1480-0x14ff has been reserved
[ 0.237129] system 00:03: ioport range 0x1800-0x187f has been reserved
[ 0.237132] system 00:03: ioport range 0x1880-0x18ff has been reserved
[ 0.237139] system 00:04: ioport range 0x360-0x361 has been reserved
[ 0.237142] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
[ 0.237151] system 00:0b: iomem range 0xffc00000-0xffffffff could not be reserved
[ 0.237155] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.237158] system 00:0b: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 0.237162] system 00:0b: iomem range 0xfed00000-0xfed00fff has been reserved
[ 0.237165] system 00:0b: iomem range 0xfef00000-0xfef00fff has been reserved
[ 0.271885] pci 0000:00:08.0: PCI bridge, secondary bus 0000:02
[ 0.271888] pci 0000:00:08.0: IO window: disabled
[ 0.271893] pci 0000:00:08.0: MEM window: 0xf6100000-0xf61fffff
[ 0.271897] pci 0000:00:08.0: PREFETCH window: disabled
[ 0.271902] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
[ 0.271906] pci 0000:00:0c.0: IO window: 0x4000-0x4fff
[ 0.271910] pci 0000:00:0c.0: MEM window: 0xf2000000-0xf3ffffff
[ 0.271914] pci 0000:00:0c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff
[ 0.271920] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:03
[ 0.271922] pci 0000:00:0d.0: IO window: disabled
[ 0.271926] pci 0000:00:0d.0: MEM window: 0xf6000000-0xf60fffff
[ 0.271930] pci 0000:00:0d.0: PREFETCH window: disabled
[ 0.271940] pci 0000:00:08.0: setting latency timer to 64
[ 0.271947] pci 0000:00:0c.0: setting latency timer to 64
[ 0.271953] pci 0000:00:0d.0: setting latency timer to 64
[ 0.271958] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.271962] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.271966] pci_bus 0000:02: resource 1 mem: [0xf6100000-0xf61fffff]
[ 0.271969] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.271972] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.271976] pci_bus 0000:04: resource 0 io: [0x4000-0x4fff]
[ 0.271979] pci_bus 0000:04: resource 1 mem: [0xf2000000-0xf3ffffff]
[ 0.271983] pci_bus 0000:04: resource 2 pref mem [0xf0000000-0xf1ffffff]
[ 0.271987] pci_bus 0000:03: resource 1 mem: [0xf6000000-0xf60fffff]
[ 0.272041] NET: Registered protocol family 2
[ 0.272143] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.272514] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.273182] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.273504] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.273507] TCP reno registered
[ 0.273605] NET: Registered protocol family 1
[ 0.273766] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.273820] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.273879] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.273945] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.274015] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.274090] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.274097] pci 0000:00:12.0: Boot video device
[ 0.274136] Simple Boot Flag at 0x36 set to 0x1
[ 0.274320] cpufreq-nforce2: No nForce2 chipset.
[ 0.274348] Scanning for low memory corruption every 60 seconds
[ 0.274484] audit: initializing netlink socket (disabled)
[ 0.274495] type=2000 audit(1281399018.273:1): initialized
[ 0.285251] highmem bounce pool size: 64 pages
[ 0.285257] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.286879] VFS: Disk quotas dquot_6.5.2
[ 0.286939] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.287532] fuse init (API version 7.13)
[ 0.287623] msgmni has been set to 1707
[ 0.287854] alg: No test for stdrng (krng)
[ 0.287913] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.287916] io scheduler noop registered
[ 0.287919] io scheduler anticipatory registered
[ 0.287921] io scheduler deadline registered
[ 0.287966] io scheduler cfq registered (default)
[ 0.288130] alloc irq_desc for 24 on node -1
[ 0.288133] alloc kstat_irqs on node -1
[ 0.288142] pcieport 0000:00:0c.0: irq 24 for MSI/MSI-X
[ 0.288148] pcieport 0000:00:0c.0: setting latency timer to 64
[ 0.288225] alloc irq_desc for 25 on node -1
[ 0.288227] alloc kstat_irqs on node -1
[ 0.288232] pcieport 0000:00:0d.0: irq 25 for MSI/MSI-X
[ 0.288236] pcieport 0000:00:0d.0: setting latency timer to 64
[ 0.288300] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.288325] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.288868] ACPI: AC Adapter [ACAD] (on-line)
[ 0.288965] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.288970] ACPI: Sleep Button [SLPB]
[ 0.289016] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 0.289285] ACPI: Lid Switch [LID]
[ 0.289350] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 0.289354] ACPI: Power Button [PWRB]
[ 0.289402] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.289406] ACPI: Power Button [PWRF]
[ 0.289736] ACPI: processor limited to max C-state 1
[ 0.289760] processor LNXCPU:00: registered as cooling_device0
[ 0.289866] processor LNXCPU:01: registered as cooling_device1
[ 0.293151] ACPI Exception: AE_OK, No or invalid critical threshold (20090903/thermal-386)
[ 0.294818] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.296176] brd: module loaded
[ 0.296679] loop: module loaded
[ 0.296778] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 0.296962] pata_acpi 0000:00:06.0: setting latency timer to 64
[ 0.297374] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23
[ 0.297380] alloc irq_desc for 23 on node -1
[ 0.297383] alloc kstat_irqs on node -1
[ 0.297394] pata_acpi 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 23 (level, low) -> IRQ 23
[ 0.297413] pata_acpi 0000:00:09.0: setting latency timer to 64
[ 0.297421] pata_acpi 0000:00:09.0: PCI INT A disabled
[ 0.297741] Fixed MDIO Bus: probed
[ 0.297779] PPP generic driver version 2.4.2
[ 0.297820] tun: Universal TUN/TAP device driver, 1.6
[ 0.297822] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.297910] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.298215] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
[ 0.298219] alloc irq_desc for 22 on node -1
[ 0.298221] alloc kstat_irqs on node -1
[ 0.298229] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22
[ 0.298246] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 0.298250] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 0.298287] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 0.298313] ehci_hcd 0000:00:02.1: debug port 1
[ 0.298322] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 0.298344] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf6489000
[ 0.298747] isapnp: Scanning for PnP cards...
[ 0.347669] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.347789] usb usb1: configuration #1 chosen from 1 choice
[ 0.347823] hub 1-0:1.0: USB hub found
[ 0.347832] hub 1-0:1.0: 7 ports detected
[ 0.348224] ACPI: PCI Interrupt Link [Z019] enabled at IRQ 22
[ 0.348228] ehci_hcd 0000:00:04.1: PCI INT B -> Link[Z019] -> GSI 22 (level, low) -> IRQ 22
[ 0.348238] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 0.348241] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 0.348276] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
[ 0.348297] ehci_hcd 0000:00:04.1: debug port 1
[ 0.348305] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[ 0.348311] ehci_hcd 0000:00:04.1: irq 22, io mem 0xf6489400
[ 0.391773] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 0.391861] usb usb2: configuration #1 chosen from 1 choice
[ 0.391888] hub 2-0:1.0: USB hub found
[ 0.391896] hub 2-0:1.0: 2 ports detected
[ 0.391944] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.392250] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 18
[ 0.392254] alloc irq_desc for 18 on node -1
[ 0.392257] alloc kstat_irqs on node -1
[ 0.392265] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 18 (level, low) -> IRQ 18
[ 0.392275] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 0.392279] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 0.392315] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
[ 0.392347] ohci_hcd 0000:00:02.0: irq 18, io mem 0xf6486000
[ 0.481251] usb usb3: configuration #1 chosen from 1 choice
[ 0.481279] hub 3-0:1.0: USB hub found
[ 0.481289] hub 3-0:1.0: 7 ports detected
[ 0.481618] ACPI: PCI Interrupt Link [Z018] enabled at IRQ 18
[ 0.481623] ohci_hcd 0000:00:04.0: PCI INT A -> Link[Z018] -> GSI 18 (level, low) -> IRQ 18
[ 0.481632] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 0.481635] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 0.481669] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
[ 0.481682] ohci_hcd 0000:00:04.0: irq 18, io mem 0xf6487000
[ 0.550524] usb usb4: configuration #1 chosen from 1 choice
[ 0.550558] hub 4-0:1.0: USB hub found
[ 0.550570] hub 4-0:1.0: 2 ports detected
[ 0.550633] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.550731] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 0.579011] Freeing initrd memory: 13388k freed
[ 0.589980] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.589994] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.590176] mice: PS/2 mouse device common for all mice
[ 0.591455] rtc_cmos 00:07: RTC can wake from S4
[ 0.591509] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.591549] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 0.591677] device-mapper: uevent: version 1.0.3
[ 0.591798] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.591872] device-mapper: multipath: version 1.1.0 loaded
[ 0.591876] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.592022] EISA: Probing bus 0 at eisa.0
[ 0.592028] Cannot allocate resource for EISA slot 1
[ 0.592034] Cannot allocate resource for EISA slot 3
[ 0.592037] Cannot allocate resource for EISA slot 4
[ 0.592050] EISA: Detected 0 cards.
[ 0.592137] cpuidle: using governor ladder
[ 0.592139] cpuidle: using governor menu
[ 0.592609] TCP cubic registered
[ 0.592778] NET: Registered protocol family 10
[ 0.593257] lo: Disabled Privacy Extensions
[ 0.593598] NET: Registered protocol family 17
[ 0.593630] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-58 processors (2 cpu cores) (version 2.20.00)
[ 0.593675] powernow-k8: 0 : fid 0xb (1900 MHz), vid 0x13
[ 0.593678] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x14
[ 0.593680] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x15
[ 0.593683] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e
[ 0.593724] Using IPI No-Shortcut mode
[ 0.593810] PM: Resume from disk failed.
[ 0.593823] registered taskstats version 1
[ 0.594178] Magic number: 6:375:152
[ 0.594198] bdi 1:4: hash matches
[ 0.594291] rtc_cmos 00:07: setting system clock to 2010-08-10 00:10:19 UTC (1281399019)
[ 0.594295] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.594298] EDD information not available.
[ 0.610926] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 0.623316] ACPI: Battery Slot [BAT0] (battery present)
[ 0.655878] isapnp: No Plug & Play device found
[ 0.908388] Freeing unused kernel memory: 660k freed
[ 0.908878] Write protecting the kernel text: 4680k
[ 0.908919] Write protecting the kernel read-only data: 1840k
[ 0.930443] udev: starting version 151
[ 0.968060] usb 3-4: new low speed USB device using ohci_hcd and address 2
[ 1.048514] pata_amd 0000:00:06.0: version 0.4.1
[ 1.048569] pata_amd 0000:00:06.0: setting latency timer to 64
[ 1.058771] acpi device:23: registered as cooling_device2
[ 1.058922] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 1.058978] ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no)
[ 1.059479] scsi0 : pata_amd
[ 1.065839] scsi1 : pata_amd
[ 1.066305] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14
[ 1.066309] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15
[ 1.076951] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.077328] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
[ 1.077335] alloc irq_desc for 20 on node -1
[ 1.077338] alloc kstat_irqs on node -1
[ 1.077349] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) -> IRQ 20
[ 1.077355] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 1.080365] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19
[ 1.080372] alloc irq_desc for 19 on node -1
[ 1.080374] alloc kstat_irqs on node -1
[ 1.080385] b43-pci-bridge 0000:03:00.0: PCI INT A -> Link[LK4E] -> GSI 19 (level, low) -> IRQ 19
[ 1.080394] b43-pci-bridge 0000:03:00.0: setting latency timer to 64
[ 1.140085] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
[ 1.177299] usb 3-4: configuration #1 chosen from 1 choice
[ 1.252310] ata1.00: ATAPI: Slimtype DVD A DS8A1P, CH71, max MWDMA2
[ 1.252340] ata1: nv_mode_filter: 0x39f&0x739f->0x39f, BIOS=0x0 (0xc600) ACPI=0x39f (120:600:0x12)
[ 1.292294] ata1.00: configured for MWDMA2
[ 1.296107] scsi 0:0:0:0: CD-ROM Slimtype DVD A DS8A1P CH71 PQ: 0 ANSI: 5
[ 1.306796] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.306799] Uniform CD-ROM driver Revision: 3.20
[ 1.306918] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.306984] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.307076] ata2: port disabled. ignoring.
[ 1.308569] vga16fb: initializing
[ 1.308574] vga16fb: mapped to 0xc00a0000
[ 1.308640] fb0: VGA16 VGA frame buffer device
[ 1.312225] ohci1394 0000:02:05.0: enabling device (0100 -> 0102)
[ 1.312573] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5
[ 1.312587] ohci1394 0000:02:05.0: PCI INT A -> Link[LNK1] -> GSI 5 (level, low) -> IRQ 5
[ 1.317622] usbcore: registered new interface driver hiddev
[ 1.332524] input: HID 04d9:0499 as /devices/pci0000:00/0000:00:02.0/usb3/3-4/3-4:1.0/input/input7
[ 1.332632] generic-usb 0003:04D9:0499.0001: input,hidraw0: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:02.0-4/input0
[ 1.332661] usbcore: registered new interface driver usbhid
[ 1.332694] usbhid: v2.6:USB HID core driver
[ 1.370067] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[f6100000-f61007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 1.516649] Console: switching to colour frame buffer device 80x30
[ 1.597130] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1b:24:74:c6:1c
[ 1.597136] forcedeth 0000:00:0a.0: highdma pwrctl mgmt lnktim msi desc-v3
[ 1.597165] ahci 0000:00:09.0: version 3.0
[ 1.597181] ahci 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 23 (level, low) -> IRQ 23
[ 1.597228] alloc irq_desc for 26 on node -1
[ 1.597231] alloc kstat_irqs on node -1
[ 1.597240] ahci 0000:00:09.0: irq 26 for MSI/MSI-X
[ 1.597246] ahci 0000:00:09.0: controller can do NCQ, turning on CAP_NCQ
[ 1.597315] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[ 1.597320] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio slum part
[ 1.597325] ahci 0000:00:09.0: setting latency timer to 64
[ 1.597789] scsi2 : ahci
[ 1.597889] scsi3 : ahci
[ 1.597972] scsi4 : ahci
[ 1.598042] scsi5 : ahci
[ 1.598184] ata3: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484100 irq 26
[ 1.598189] ata4: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484180 irq 26
[ 1.598193] ata5: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484200 irq 26
[ 1.598197] ata6: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484280 irq 26
[ 1.620034] usb 4-1: new full speed USB device using ohci_hcd and address 2
[ 1.850508] usb 4-1: configuration #1 chosen from 1 choice
[ 1.916035] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.916066] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.916080] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.080027] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.080639] ata3.00: ATA-7: WDC WD1600BEVS-60RST0, 04.01G04, max UDMA/100
[ 2.080643] ata3.00: 312581808 sectors, multi 16: LBA48
[ 2.081352] ata3.00: configured for UDMA/100
[ 2.081467] scsi 2:0:0:0: Direct-Access ATA WDC WD1600BEVS-6 04.0 PQ: 0 ANSI: 5
[ 2.081650] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 2.081768] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.081814] sd 2:0:0:0: [sda] Write Protect is off
[ 2.081818] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.081842] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.081999] sda: sda1 sda2 sda3 sda4 < sda5 >
[ 2.134410] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.640181] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b0095334000]
[ 2.727205] xor: automatically using best checksumming function: pIII_sse
[ 2.744010] pIII_sse : 5768.000 MB/sec
[ 2.744013] xor: using function: pIII_sse (5768.000 MB/sec)
[ 2.747231] device-mapper: dm-raid45: initialized v0.2594b
[ 2.902481] EXT4-fs (sda3): mounted filesystem with ordered data mode
[ 18.004763] udev: starting version 151
[ 18.048854] Adding 2047992k swap on /dev/sda5. Priority:-1 extents:1 across:2047992k
[ 18.141886] lp: driver loaded but no devices found
[ 18.319909] i2c i2c-0: nForce2 SMBus adapter at 0x3040
[ 18.319934] i2c i2c-1: nForce2 SMBus adapter at 0x3000
[ 18.429655] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 18.434731] Linux agpgart interface v0.103
[ 18.501304] nvidia: module license 'NVIDIA' taints kernel.
[ 18.501309] Disabling lock debugging due to kernel taint
[ 19.398225] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
[ 19.476997] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 19.675165] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 19.675169] ricoh-mmc: Copyright(c) Philip Langdale
[ 19.675199] ricoh-mmc: Ricoh MMC controller found at 0000:02:05.2 [1180:0843] (rev 12)
[ 19.675214] ricoh-mmc: Controller is now disabled.
[ 19.695406] sdhci: Secure Digital Host Controller Interface driver
[ 19.695411] sdhci: Copyright(c) Pierre Ossman
[ 19.697403] cfg80211: Calling CRDA to update world regulatory domain
[ 19.726629] b43-phy0: Broadcom 4311 WLAN found (core revision 13)
[ 19.745066] cfg80211: World regulatory domain updated:
[ 19.745070] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 19.745074] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.745078] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 19.745081] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 19.745084] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.745087] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.850871] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 19.850878] alloc irq_desc for 21 on node -1
[ 19.850880] alloc kstat_irqs on node -1
[ 19.850892] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[ 19.850895] hda_intel: Disable MSI for Nvidia chipset
[ 19.850942] HDA Intel 0000:00:07.0: setting latency timer to 64
[ 19.857720] phy0: Selected rate control algorithm 'minstrel'
[ 19.858491] Registered led device: b43-phy0::tx
[ 19.858509] Registered led device: b43-phy0::rx
[ 19.858529] Registered led device: b43-phy0::radio
[ 19.858603] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ]
[ 19.874005] Bluetooth: Core ver 2.15
[ 19.874139] NET: Registered protocol family 31
[ 19.874142] Bluetooth: HCI device and connection manager initialized
[ 19.874146] Bluetooth: HCI socket layer initialized
[ 19.876177] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 19.876297] usbcore: registered new interface driver btusb
[ 19.879786] sdhci-pci 0000:02:05.1: SDHCI controller found [1180:0822] (rev 22)
[ 19.880130] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7
[ 19.880145] sdhci-pci 0000:02:05.1: PCI INT B -> Link[LNK2] -> GSI 7 (level, low) -> IRQ 7
[ 19.887963] Registered led device: mmc0::
[ 19.889101] mmc0: SDHCI controller on PCI [0000:02:05.1] using PIO
[ 19.952676] EXT4-fs (sda2): mounted filesystem with ordered data mode
[ 20.260660] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 16
[ 20.260668] alloc irq_desc for 16 on node -1
[ 20.260671] alloc kstat_irqs on node -1
[ 20.260682] nvidia 0000:00:12.0: PCI INT A -> Link[LGPU] -> GSI 16 (level, low) -> IRQ 16
[ 20.260689] nvidia 0000:00:12.0: setting latency timer to 64
[ 20.260695] vgaarb: device changed decodes: PCI:0000:00:12.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 20.260972] NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.24 Thu Apr 22 09:18:20 PDT 2010
[ 20.848529] kjournald starting. Commit interval 5 seconds
[ 20.848779] EXT3 FS on sda1, internal journal
[ 20.848785] EXT3-fs: mounted filesystem with ordered data mode.
[ 21.259296] alloc irq_desc for 27 on node -1
[ 21.259300] alloc kstat_irqs on node -1
[ 21.259311] forcedeth 0000:00:0a.0: irq 27 for MSI/MSI-X
[ 21.259512] eth0: no link during initialization.
[ 21.260124] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.320034] b43 ssb0:0: firmware: requesting b43/ucode13.fw
[ 21.338220] b43 ssb0:0: firmware: requesting b43/b0g0initvals13.fw
[ 21.480041] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[ 21.717542] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 22.229768] Bluetooth: L2CAP ver 2.14
[ 22.229772] Bluetooth: L2CAP socket layer initialized
[ 22.236550] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 22.236555] Bluetooth: BNEP filters: protocol multicast
[ 22.245362] Bridge firewalling registered
[ 22.252838] Bluetooth: SCO (Voice Link) ver 0.6
[ 22.252842] Bluetooth: SCO socket layer initialized
[ 22.270196] ppdev: user-space parallel port driver
[ 23.729266] Bluetooth: RFCOMM TTY layer initialized
[ 23.729272] Bluetooth: RFCOMM socket layer initialized
[ 23.729275] Bluetooth: RFCOMM ver 1.11
[ 31.152147] wlan0: deauthenticating from 00:23:69:b8:92:52 by local choice (reason=3)
[ 31.152242] wlan0: direct probe to AP 00:23:69:b8:92:52 (try 1)
[ 31.352050] wlan0: direct probe to AP 00:23:69:b8:92:52 (try 2)
[ 31.552071] wlan0: direct probe to AP 00:23:69:b8:92:52 (try 3)
[ 31.752029] wlan0: direct probe to AP 00:23:69:b8:92:52 timed out
[b][ 41.676029] b43-phy0 ERROR: MAC suspend failed
[ 42.064027] b43-phy0 ERROR: MAC suspend failed
[ 42.452029] b43-phy0 ERROR: MAC suspend failed
[ 42.840029] b43-phy0 ERROR: MAC suspend failed
[ 43.228028] b43-phy0 ERROR: MAC suspend failed
[ 43.616027] b43-phy0 ERROR: MAC suspend failed
[ 44.004033] b43-phy0 ERROR: MAC suspend failed
[ 44.392029] b43-phy0 ERROR: MAC suspend failed
[ 44.780029] b43-phy0 ERROR: MAC suspend failed
[ 45.168027] b43-phy0 ERROR: MAC suspend failed
[ 46.924031] __ratelimit: 3 callbacks suppressed
[ 46.924035] b43-phy0 ERROR: MAC suspend failed
[ 47.256027] b43-phy0 ERROR: MAC suspend failed
[ 51.928030] b43-phy0 ERROR: MAC suspend failed
[ 52.248027] b43-phy0 ERROR: MAC suspend failed
[ 52.668029] b43-phy0 ERROR: MAC suspend failed
[ 53.056028] b43-phy0 ERROR: MAC suspend failed
[ 53.444028] b43-phy0 ERROR: MAC suspend failed
[ 53.832028] b43-phy0 ERROR: MAC suspend failed
[ 54.220028] b43-phy0 ERROR: MAC suspend failed
[ 54.608029] b43-phy0 ERROR: MAC suspend failed
[ 54.996032] b43-phy0 ERROR: MAC suspend failed
[ 55.384031] b43-phy0 ERROR: MAC suspend failed
[ 55.772028] b43-phy0 ERROR: MAC suspend failed
[ 56.160030] b43-phy0 ERROR: MAC suspend failed
[ 58.304032] __ratelimit: 4 callbacks suppressed
[ 58.304036] b43-phy0 ERROR: MAC suspend failed
[ 58.636027] b43-phy0 ERROR: MAC suspend failed
[ 63.308030] b43-phy0 ERROR: MAC suspend failed
[ 63.756028] b43-phy0 ERROR: MAC suspend failed
[ 64.144030] b43-phy0 ERROR: MAC suspend failed
[ 64.532027] b43-phy0 ERROR: MAC suspend failed
[ 64.920027] b43-phy0 ERROR: MAC suspend failed
[ 65.308028] b43-phy0 ERROR: MAC suspend failed
[ 65.696027] b43-phy0 ERROR: MAC suspend failed
[ 66.084027] b43-phy0 ERROR: MAC suspend failed
[ 66.668029] b43-phy0 ERROR: MAC suspend failed
[ 67.056027] b43-phy0 ERROR: MAC suspend failed
[ 67.444028] b43-phy0 ERROR: MAC suspend failed
[ 69.396031] __ratelimit: 4 callbacks suppressed
[ 69.396035] b43-phy0 ERROR: MAC suspend failed
[ 69.728028] b43-phy0 ERROR: MAC suspend failed
[ 74.400029] b43-phy0 ERROR: MAC suspend failed
[ 74.848027] b43-phy0 ERROR: MAC suspend failed
[ 75.236027] b43-phy0 ERROR: MAC suspend failed
[ 75.624027] b43-phy0 ERROR: MAC suspend failed
[ 76.300028] b43-phy0 ERROR: MAC suspend failed
[ 76.688028] b43-phy0 ERROR: MAC suspend failed
[ 77.076027] b43-phy0 ERROR: MAC suspend failed
[ 77.464027] b43-phy0 ERROR: MAC suspend failed
[ 77.852029] b43-phy0 ERROR: MAC suspend failed
[ 78.240027] b43-phy0 ERROR: MAC suspend failed
[ 78.628027] b43-phy0 ERROR: MAC suspend failed
[ 80.328031] __ratelimit: 3 callbacks suppressed
[ 80.328035] b43-phy0 ERROR: MAC suspend failed
[ 84.504042] Clocksource tsc unstable (delta = -217712880 ns)
[ 85.196043] b43-phy0 ERROR: MAC suspend failed
[ 85.584042] b43-phy0 ERROR: MAC suspend failed
[ 85.972043] b43-phy0 ERROR: MAC suspend failed
[ 86.360044] b43-phy0 ERROR: MAC suspend failed
[ 86.748045] b43-phy0 ERROR: MAC suspend failed
[ 87.136044] b43-phy0 ERROR: MAC suspend failed
[ 87.600041] b43-phy0 ERROR: MAC suspend failed
[ 87.988046] b43-phy0 ERROR: MAC suspend failed
[ 88.380060] b43-phy0 ERROR: MAC suspend failed
[ 90.472034] __ratelimit: 4 callbacks suppressed[/b]
[ 90.472044] b43-phy0 ERROR: MAC suspend failed
[ 95.664024] b43-phy0 ERROR: MAC suspend failed
[ 96.048048] b43-phy0 ERROR: MAC suspend failed
[ 96.608048] b43-phy0 ERROR: MAC suspend failed
[ 96.996050] b43-phy0 ERROR: MAC suspend failed
[ 97.385050] b43-phy0 ERROR: MAC suspend failed
[ 97.772053] b43-phy0 ERROR: MAC suspend failed
[ 98.164125] b43-phy0 ERROR: MAC suspend failed
[ 98.556055] b43-phy0 ERROR: MAC suspend failed
[ 98.944052] b43-phy0 ERROR: MAC suspend failed
[ 100.992043] __ratelimit: 4 callbacks suppressed
[ 100.992052] b43-phy0 ERROR: MAC suspend failed
[ 101.324052] b43-phy0 ERROR: MAC suspend failed
[ 106.396058] b43-phy0 ERROR: MAC suspend failed
[ 106.784278] b43-phy0 ERROR: MAC suspend failed
[ 107.176046] b43-phy0 ERROR: MAC suspend failed
[ 107.564076] b43-phy0 ERROR: MAC suspend failed
[ 107.952049] b43-phy0 ERROR: MAC suspend failed
[ 108.340048] b43-phy0 ERROR: MAC suspend failed
[ 108.728049] b43-phy0 ERROR: MAC suspend failed
[ 109.116043] b43-phy0 ERROR: MAC suspend failed
[ 109.572051] b43-phy0 ERROR: MAC suspend failed
[ 110.029031] b43-phy0 ERROR: MAC suspend failed
[ 115.700021] __ratelimit: 2 callbacks suppressed
[ 115.700024] b43-phy0 ERROR: MAC suspend failed
[ 116.088061] b43-phy0 ERROR: MAC suspend failed
[ 116.476071] b43-phy0 ERROR: MAC suspend failed
[ 116.865058] b43-phy0 ERROR: MAC suspend failed
[ 117.252046] b43-phy0 ERROR: MAC suspend failed
[ 117.640043] b43-phy0 ERROR: MAC suspend failed
[ 118.272034] b43-phy0 ERROR: MAC suspend failed
[ 118.660049] b43-phy0 ERROR: MAC suspend failed
[ 119.048048] b43-phy0 ERROR: MAC suspend failed
[ 119.436039] b43-phy0 ERROR: MAC suspend failed
[ 121.140037] __ratelimit: 3 callbacks suppressed
[ 121.140041] b43-phy0 ERROR: MAC suspend failed
[ 126.232051] b43-phy0 ERROR: MAC suspend failed
[ 126.620047] b43-phy0 ERROR: MAC suspend failed
[ 127.008071] b43-phy0 ERROR: MAC suspend failed
[ 127.396050] b43-phy0 ERROR: MAC suspend failed
[ 127.784053] b43-phy0 ERROR: MAC suspend failed
[ 128.172049] b43-phy0 ERROR: MAC suspend failed
[ 128.560063] b43-phy0 ERROR: MAC suspend failed
[ 128.948071] b43-phy0 ERROR: MAC suspend failed
[ 134.876046] b43-phy0 ERROR: MAC suspend failed
[ 135.268044] b43-phy0 ERROR: MAC suspend failed
[ 135.656054] b43-phy0 ERROR: MAC suspend failed
[ 136.044051] b43-phy0 ERROR: MAC suspend failed
[ 136.432051] b43-phy0 ERROR: MAC suspend failed
[ 136.820042] b43-phy0 ERROR: MAC suspend failed
[ 137.476052] b43-phy0 ERROR: MAC suspend failed
[ 137.864051] b43-phy0 ERROR: MAC suspend failed
[ 138.252063] b43-phy0 ERROR: MAC suspend failed
[ 138.640047] b43-phy0 ERROR: MAC suspend failed
[ 140.340052] __ratelimit: 3 callbacks suppressed
[ 140.340061] b43-phy0 ERROR: MAC suspend failed
[ 145.348052] b43-phy0 ERROR: MAC suspend failed
[ 145.736048] b43-phy0 ERROR: MAC suspend failed
[ 146.124047] b43-phy0 ERROR: MAC suspend failed
[ 146.512050] b43-phy0 ERROR: MAC suspend failed
[ 147.048053] b43-phy0 ERROR: MAC suspend failed
Code: Select all
[ 31.152147] wlan0: deauthenticating from 00:23:69:b8:92:52 by local choice (reason=3)
[ 31.152242] wlan0: direct probe to AP 00:23:69:b8:92:52 (try 1)
[ 31.352050] wlan0: direct probe to AP 00:23:69:b8:92:52 (try 2)
[ 31.552071] wlan0: direct probe to AP 00:23:69:b8:92:52 (try 3)
[ 31.752029] wlan0: direct probe to AP 00:23:69:b8:92:52 timed out
[ 41.676029] b43-phy0 ERROR: MAC suspend failed
[ 42.064027] b43-phy0 ERROR: MAC suspend failed
[ 42.452029] b43-phy0 ERROR: MAC suspend failed
[ 42.840029] b43-phy0 ERROR: MAC suspend failed
[ 43.228028] b43-phy0 ERROR: MAC suspend failed
[ 43.616027] b43-phy0 ERROR: MAC suspend failed
[ 44.004033] b43-phy0 ERROR: MAC suspend failed
[ 44.392029] b43-phy0 ERROR: MAC suspend failed
[ 44.780029] b43-phy0 ERROR: MAC suspend failed
[ 45.168027] b43-phy0 ERROR: MAC suspend failed
[ 46.924031] __ratelimit: 3 callbacks suppressed
[ 46.924035] b43-phy0 ERROR: MAC suspend failed
[ 47.256027] b43-phy0 ERROR: MAC suspend failed
[ 51.928030] b43-phy0 ERROR: MAC suspend failed
[ 52.248027] b43-phy0 ERROR: MAC suspend failed
[ 52.668029] b43-phy0 ERROR: MAC suspend failed
[ 53.056028] b43-phy0 ERROR: MAC suspend failed
[ 53.444028] b43-phy0 ERROR: MAC suspend failed
[ 53.832028] b43-phy0 ERROR: MAC suspend failed
[ 54.220028] b43-phy0 ERROR: MAC suspend failed
[ 54.608029] b43-phy0 ERROR: MAC suspend failed
[ 54.996032] b43-phy0 ERROR: MAC suspend failed
[ 55.384031] b43-phy0 ERROR: MAC suspend failed
[ 55.772028] b43-phy0 ERROR: MAC suspend failed
[ 56.160030] b43-phy0 ERROR: MAC suspend failed
[ 58.304032] __ratelimit: 4 callbacks suppressed
[ 58.304036] b43-phy0 ERROR: MAC suspend failed
[ 58.636027] b43-phy0 ERROR: MAC suspend failed
[ 63.308030] b43-phy0 ERROR: MAC suspend failed
[ 63.756028] b43-phy0 ERROR: MAC suspend failed
[ 64.144030] b43-phy0 ERROR: MAC suspend failed
[ 64.532027] b43-phy0 ERROR: MAC suspend failed
[ 64.920027] b43-phy0 ERROR: MAC suspend failed
[ 65.308028] b43-phy0 ERROR: MAC suspend failed
[ 65.696027] b43-phy0 ERROR: MAC suspend failed
[ 66.084027] b43-phy0 ERROR: MAC suspend failed
[ 66.668029] b43-phy0 ERROR: MAC suspend failed
[ 67.056027] b43-phy0 ERROR: MAC suspend failed
[ 67.444028] b43-phy0 ERROR: MAC suspend failed
[ 69.396031] __ratelimit: 4 callbacks suppressed
[ 69.396035] b43-phy0 ERROR: MAC suspend failed
[ 69.728028] b43-phy0 ERROR: MAC suspend failed
[ 74.400029] b43-phy0 ERROR: MAC suspend failed
[ 74.848027] b43-phy0 ERROR: MAC suspend failed
[ 75.236027] b43-phy0 ERROR: MAC suspend failed
[ 75.624027] b43-phy0 ERROR: MAC suspend failed
[ 76.300028] b43-phy0 ERROR: MAC suspend failed
[ 76.688028] b43-phy0 ERROR: MAC suspend failed
[ 77.076027] b43-phy0 ERROR: MAC suspend failed
[ 77.464027] b43-phy0 ERROR: MAC suspend failed
[ 77.852029] b43-phy0 ERROR: MAC suspend failed
[ 78.240027] b43-phy0 ERROR: MAC suspend failed
[ 78.628027] b43-phy0 ERROR: MAC suspend failed
[ 80.328031] __ratelimit: 3 callbacks suppressed
[ 80.328035] b43-phy0 ERROR: MAC suspend failed
[ 84.504042] Clocksource tsc unstable (delta = -217712880 ns)
[ 85.196043] b43-phy0 ERROR: MAC suspend failed
[ 85.584042] b43-phy0 ERROR: MAC suspend failed
[ 85.972043] b43-phy0 ERROR: MAC suspend failed
[ 86.360044] b43-phy0 ERROR: MAC suspend failed
[ 86.748045] b43-phy0 ERROR: MAC suspend failed
[ 87.136044] b43-phy0 ERROR: MAC suspend failed
[ 87.600041] b43-phy0 ERROR: MAC suspend failed
[ 87.988046] b43-phy0 ERROR: MAC suspend failed
[ 88.380060] b43-phy0 ERROR: MAC suspend failed
[ 90.472034] __ratelimit: 4 callbacks suppressed
[ 90.472044] b43-phy0 ERROR: MAC suspend failed
[ 95.664024] b43-phy0 ERROR: MAC suspend failed
[ 96.048048] b43-phy0 ERROR: MAC suspend failed
[ 96.608048] b43-phy0 ERROR: MAC suspend failed
[ 96.996050] b43-phy0 ERROR: MAC suspend failed
[ 97.385050] b43-phy0 ERROR: MAC suspend failed
[ 97.772053] b43-phy0 ERROR: MAC suspend failed
[ 98.164125] b43-phy0 ERROR: MAC suspend failed
[ 98.556055] b43-phy0 ERROR: MAC suspend failed
[ 98.944052] b43-phy0 ERROR: MAC suspend failed
[ 100.992043] __ratelimit: 4 callbacks suppressed
[ 100.992052] b43-phy0 ERROR: MAC suspend failed
[ 101.324052] b43-phy0 ERROR: MAC suspend failed
[ 106.396058] b43-phy0 ERROR: MAC suspend failed
[ 106.784278] b43-phy0 ERROR: MAC suspend failed
[ 107.176046] b43-phy0 ERROR: MAC suspend failed
[ 107.564076] b43-phy0 ERROR: MAC suspend failed
[ 107.952049] b43-phy0 ERROR: MAC suspend failed
[ 108.340048] b43-phy0 ERROR: MAC suspend failed
[ 108.728049] b43-phy0 ERROR: MAC suspend failed
[ 109.116043] b43-phy0 ERROR: MAC suspend failed
[ 109.572051] b43-phy0 ERROR: MAC suspend failed
[ 110.029031] b43-phy0 ERROR: MAC suspend failed
[ 115.700021] __ratelimit: 2 callbacks suppressed
[ 115.700024] b43-phy0 ERROR: MAC suspend failed
[ 116.088061] b43-phy0 ERROR: MAC suspend failed
[ 116.476071] b43-phy0 ERROR: MAC suspend failed
[ 116.865058] b43-phy0 ERROR: MAC suspend failed
[ 117.252046] b43-phy0 ERROR: MAC suspend failed
[ 117.640043] b43-phy0 ERROR: MAC suspend failed
[ 118.272034] b43-phy0 ERROR: MAC suspend failed
[ 118.660049] b43-phy0 ERROR: MAC suspend failed
[ 119.048048] b43-phy0 ERROR: MAC suspend failed
[ 119.436039] b43-phy0 ERROR: MAC suspend failed
[ 121.140037] __ratelimit: 3 callbacks suppressed
[ 121.140041] b43-phy0 ERROR: MAC suspend failed
[ 126.232051] b43-phy0 ERROR: MAC suspend failed
[ 126.620047] b43-phy0 ERROR: MAC suspend failed
[ 127.008071] b43-phy0 ERROR: MAC suspend failed
[ 127.396050] b43-phy0 ERROR: MAC suspend failed
[ 127.784053] b43-phy0 ERROR: MAC suspend failed
[ 128.172049] b43-phy0 ERROR: MAC suspend failed
[ 128.560063] b43-phy0 ERROR: MAC suspend failed
[ 128.948071] b43-phy0 ERROR: MAC suspend failed
[ 134.876046] b43-phy0 ERROR: MAC suspend failed
[ 135.268044] b43-phy0 ERROR: MAC suspend failed
[ 135.656054] b43-phy0 ERROR: MAC suspend failed
[ 136.044051] b43-phy0 ERROR: MAC suspend failed
[ 136.432051] b43-phy0 ERROR: MAC suspend failed
[ 136.820042] b43-phy0 ERROR: MAC suspend failed
[ 137.476052] b43-phy0 ERROR: MAC suspend failed
[ 137.864051] b43-phy0 ERROR: MAC suspend failed
[ 138.252063] b43-phy0 ERROR: MAC suspend failed
[ 138.640047] b43-phy0 ERROR: MAC suspend failed
[ 140.340052] __ratelimit: 3 callbacks suppressed
[ 140.340061] b43-phy0 ERROR: MAC suspend failed
[ 145.348052] b43-phy0 ERROR: MAC suspend failed
[ 145.736048] b43-phy0 ERROR: MAC suspend failed
[ 146.124047] b43-phy0 ERROR: MAC suspend failed
[ 146.512050] b43-phy0 ERROR: MAC suspend failed
[ 147.048053] b43-phy0 ERROR: MAC suspend failed
Thanks.