Hi
Could you please give more information on your setup as have not had any problems with Felicia Live CD connecting to the internet via ethernet.
Internet Problems on Felica LiveCD
Forum rules
There are no such things as "stupid" questions. However if you think your question is a bit stupid, then this is the right place for you to post it. Stick to easy to-the-point questions that you feel people can answer fast. For long and complicated questions use the other forums in the support section.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
There are no such things as "stupid" questions. However if you think your question is a bit stupid, then this is the right place for you to post it. Stick to easy to-the-point questions that you feel people can answer fast. For long and complicated questions use the other forums in the support section.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
- Fornhamfred
- Level 6
- Posts: 1243
- Joined: Wed Oct 31, 2007 3:38 pm
- Location: Suffolk UK
Re: Internet Problems on Felica LiveCD
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 1 time in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
- Fornhamfred
- Level 6
- Posts: 1243
- Joined: Wed Oct 31, 2007 3:38 pm
- Location: Suffolk UK
Re: Internet Problems on Felica LiveCD
Are you trying to connect wired or wireless? Any other info on your system would help.
Re: Internet Problems on Felica LiveCD
Try running
and posting that. I'm doubting a driver issue (though it is possible), because Linux has great support for ethernet cards.
Code: Select all
lshw
- Fornhamfred
- Level 6
- Posts: 1243
- Joined: Wed Oct 31, 2007 3:38 pm
- Location: Suffolk UK
Re: Internet Problems on Felica LiveCD
Hi
Out of interest I tried lswh on my Felicia Live CD, my Felicia install and my Elyssa install. I have no problem connecting to the internet or accessing network files with either of the installs.
Felicia live CD and install gave the same result for the live cd and install.
*-network DISABLED
description: Ethernet interface
physical id: 1
logical name: pan0
serial: fa:82:9d:e4:78:aa
capabilities: ethernet physical
configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A multicast=yes
Elyssa gives the following:
*-network
description: Ethernet interface
product: 82562EZ 10/100 Ethernet Controller
vendor: Intel Corporation
physical id: 8
bus info: pci@0000:01:08.0
logical name: eth0
version: 02
serial: 00:13:20:44:f6:04
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list ethernet physical
configuration: broadcast=yes driver=e100 driverversion=3.5.23-k4-NAPI firmware=N/A ip=192.168.0.2 latency=64 maxlatency=56 mingnt=8 module=e100 multicast=yes
Out of interest I tried lswh on my Felicia Live CD, my Felicia install and my Elyssa install. I have no problem connecting to the internet or accessing network files with either of the installs.
Felicia live CD and install gave the same result for the live cd and install.
*-network DISABLED
description: Ethernet interface
physical id: 1
logical name: pan0
serial: fa:82:9d:e4:78:aa
capabilities: ethernet physical
configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A multicast=yes
Elyssa gives the following:
*-network
description: Ethernet interface
product: 82562EZ 10/100 Ethernet Controller
vendor: Intel Corporation
physical id: 8
bus info: pci@0000:01:08.0
logical name: eth0
version: 02
serial: 00:13:20:44:f6:04
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list ethernet physical
configuration: broadcast=yes driver=e100 driverversion=3.5.23-k4-NAPI firmware=N/A ip=192.168.0.2 latency=64 maxlatency=56 mingnt=8 module=e100 multicast=yes
- Fornhamfred
- Level 6
- Posts: 1243
- Joined: Wed Oct 31, 2007 3:38 pm
- Location: Suffolk UK
Re: Internet Problems on Felica LiveCD
From Felicia install:
eth0 Link encap:Ethernet HWaddr 00:13:20:44:f6:04
inet addr:192.168.0.2 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1079 errors:0 dropped:0 overruns:0 frame:0
TX packets:1054 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1187803 (1.1 MB) TX bytes:201604 (201.6 KB)
eth0 Link encap:Ethernet HWaddr 00:13:20:44:f6:04
inet addr:192.168.0.2 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1079 errors:0 dropped:0 overruns:0 frame:0
TX packets:1054 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1187803 (1.1 MB) TX bytes:201604 (201.6 KB)
Re: Internet Problems on Felica LiveCD
The DISABLED string in your felicia install could very well be the problem. To fix it, type the following.
Now, go find the same string, and see if the disabled string is gone, that might fix your problem.
Code: Select all
sudo ifconfig pan0 up
Code: Select all
lshw
- Fornhamfred
- Level 6
- Posts: 1243
- Joined: Wed Oct 31, 2007 3:38 pm
- Location: Suffolk UK
Re: Internet Problems on Felica LiveCD
Following terminal entry
lshw gives
*-network
description: Ethernet interface
physical id: 1
logical name: pan0
serial: 06:8e1e:3e:9e
capabilities: ethernet physical
configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A link=yes multicast=yes
.
Under Network Nautilus shows the Icon for Windows Network but clicking on it gives the error Unable to mount location Failed to retrieve share list from Server
I have a Modem/Router Netgear DG834G, and have WICD running not Network Manager
lshw gives
*-network
description: Ethernet interface
physical id: 1
logical name: pan0
serial: 06:8e1e:3e:9e
capabilities: ethernet physical
configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A link=yes multicast=yes
.
Under Network Nautilus shows the Icon for Windows Network but clicking on it gives the error Unable to mount location Failed to retrieve share list from Server
I have a Modem/Router Netgear DG834G, and have WICD running not Network Manager
Re: Internet Problems on Felica LiveCD
Open up a terminal and type the following:
Once there, put that command at the bottom, but in front of the string
"Exit 0" Like this:
Code: Select all
gksu gedit /etc/rc.local
"Exit 0" Like this:
Code: Select all
Whatever commands you want automatically executed when Linux starts
Exit 0