Why does my webcam.
Forum rules
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Why does my webcam.
My Kodak DVC325 webcam works ok with PCLInux kde and PCLInux Gnome 2009 , but yet it wont work with Linux Mint 7 gnome.
Is there something missing in LM7 it's the same with Ubuntu jaunty, i have installed the drivers from synaptic, what else can i do, please help.
Thanks.
Is there something missing in LM7 it's the same with Ubuntu jaunty, i have installed the drivers from synaptic, what else can i do, please help.
Thanks.
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 1 time in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Re: Why does my webcam.
Which kernel version does PCLOS have? That may be the answer
Run lsusb (l is a lower case L) in a terminal with the cam connected and post here (or lspci if it's not a USB thing)
Need to know the ID to figure anything out
Run lsusb (l is a lower case L) in a terminal with the cam connected and post here (or lspci if it's not a USB thing)
Need to know the ID to figure anything out
Re: Why does my webcam.
Thanks for answering my post.Husse wrote:Which kernel version does PCLOS have? That may be the answer
Run lsusb (l is a lower case L) in a terminal with the cam connected and post here (or lspci if it's not a USB thing)
Need to know the ID to figure anything out
I realy don't know what kernel PCLinux 2009 has installed, i don't even know what kernel Linux Mint 7 has, sorry about that as i am not conversant with Linux, i just use it and enjoy it and i know nothing about the nitty gritty of the os.
Edit:
Found the PCLInux 2009 kernel version, here it is, kernel 2.6.26.8.tex3, KDE 3.5.10.
See requested below please.
Bus 001 Device 003: ID 040a:0002 Kodak Co. DVC-325
Bus 001 Device 002: ID 04b4:6560 Cypress Semiconductor Corp. CY7C65640 USB-2.0 "TetraHub"
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Re: Why does my webcam.
There is a slight difference in the kernel version PCLOS had 2.6.28-8 according to you and Mint has 2.6.28-11
This webcam uses the spca501 module from what I find
Run
Edit by Husse - fixed typo - been writing lspc to much lately
to find out if it is loaded
If you don't find it try
and test if it works
If it does add spca501 to /etc/modules (gksu gedit for that) to make it load at boot
This webcam uses the spca501 module from what I find
Run
Edit by Husse - fixed typo - been writing lspc to much lately
Code: Select all
lsmod | grep spca
If you don't find it try
Code: Select all
modprobe spca501
If it does add spca501 to /etc/modules (gksu gedit for that) to make it load at boot
Re: Why does my webcam.
FATAL: Module spca501 not foundHusse wrote:There is a slight difference in the kernel version PCLOS had 2.6.28-8 according to you and Mint has 2.6.28-11
This webcam uses the spca501 module from what I find
Runto find out if it is loadedCode: Select all
lsmod | grep lspca
If you don't find it tryand test if it worksCode: Select all
modprobe spca501
If it does add spca501 to /etc/modules (gksu gedit for that) to make it load at boot
No it's not on synaptic either.
i ran Kopete and in the webcam section it shows me Device: USb Camera (040a:0002) and in the Input Section it shows me spca501
FATAL: Module spca501 not found.
I will try to find such module and install it.
thanks.
Re: Why does my webcam.
I made a typo in the original post - it should be
The module can be spcaxxx
xxx indicating that it is not necessary spca501
Code: Select all
lsmod | spca
xxx indicating that it is not necessary spca501
Re: Why does my webcam.
I think that's also a typo: you forgot grep:Husse wrote:I made a typo in the original post - it should beThe module can be spcaxxxCode: Select all
lsmod | spca
xxx indicating that it is not necessary spca501
Code: Select all
lsmod | grep spca
Re: Why does my webcam.
Damn it!
Soon I'm a typo myself
There are so many unanswered posts now that I'm beginning to feel stressed and work faster
Have to slow down a bit
Sorry....
Soon I'm a typo myself
There are so many unanswered posts now that I'm beginning to feel stressed and work faster
Have to slow down a bit
Sorry....
Re: Why does my webcam.
OK with the grep command included this is what i get.emorrp1 wrote:I think that's also a typo: you forgot grep:Husse wrote:I made a typo in the original post - it should beThe module can be spcaxxxCode: Select all
lsmod | spca
xxx indicating that it is not necessary spca501
Code: Select all
lsmod | grep spca
charlie@charlie-desktop ~ $ lsmod | grep spca
gspca_spca501 22656 0
gspca_main 29952 1 gspca_spca501
videodev 41600 1 gspca_main
charlie@charlie-desktop ~ $
it has is there going by what i see now, but you gave me these instructions in the earlier post.
"and test if it works
If it does add spca501 to /etc/modules (gksu gedit for that) to make it load at boot"
What do i write in that file, do i just type spca501 or is there something else before it or after that i have to type.
Last edited by Chuckie on Fri Jun 05, 2009 11:00 pm, edited 2 times in total.
Re: Why does my webcam.
Take it easy Husse, it's not the end of the world for people having problems, you must take care of you first then others.Husse wrote:Damn it!
Soon I'm a typo myself
There are so many unanswered posts now that I'm beginning to feel stressed and work faster
Have to slow down a bit
Sorry....
In saying that i appreciate very much your very fine efforts to help me and others.
Cheers to you.