Hi there,
can anybody help me to configure Totem Movie Player so that it plays on TV-Out?
The options "TV-Out in fullscreen by NVIDIA (NTSC)" and "TV-Out in fullscreen by NVIDIA (PAL)" are both greyed and thus not selectable.
Here's my xorg.conf:
nvidia-settings: version 1.0 (buildd@crested) Mon Nov 3 08:46:04 UTC 2008
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: xconfig, VertRefresh source: xconfig
Identifier "Monitor1" #TV
VendorName "Unknown"
ModelName "TV-0"
HorizSync 30.0 - 50.0
VertRefresh 50.0
Option "DPMS"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0" #CRT
VendorName "Unknown"
ModelName "LG M1921A"
HorizSync 30.0 - 70.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 9600 GT"
Screen 0
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 9600 GT"
BusID "PCI:1:0:0"
Screen 1
Option "Connected Monitor" "Monitor1"
Option "TVStandard" "PAL-B"
Option "NoLogo" "true"
Option "TVOutFormat" "SVIDEO"
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "800x600_50"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768"
EndSubSection
EndSection
Can anybody help me, please?
Configuring Totem Movie Player for TV-Out
Forum rules
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Configuring Totem Movie Player for TV-Out
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 1 time in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Re: Configuring Totem Movie Player for TV-Out
Can't you change TV-out in nvidia-settings? (gksu nvidia-settings)
Re: Configuring Totem Movie Player for TV-Out
Thanks for the reply, Husse.
Could you be a little more specific - how do I have to change nvidia-settings, so that Mplayer plays on TV-Out???
Thanks
BlueLion
Could you be a little more specific - how do I have to change nvidia-settings, so that Mplayer plays on TV-Out???
Thanks
BlueLion
Re: Configuring Totem Movie Player for TV-Out
Don't have nividia right now and no TV out
You can configure dual monitors there if my memory servers me well
Then it's another story to get Totem to play well, but if the dual monitors are correctly configured it should be easier
You can configure dual monitors there if my memory servers me well
Then it's another story to get Totem to play well, but if the dual monitors are correctly configured it should be easier
Re: Configuring Totem Movie Player for TV-Out
Thanks Husse,
I have successfully configured dual monitors - on VLC Player I also succeed in using TV-Out, but I'd like to use Totem Movie Player as well,
but Toltem stubbornly refuses to do so ...
I have successfully configured dual monitors - on VLC Player I also succeed in using TV-Out, but I'd like to use Totem Movie Player as well,
but Toltem stubbornly refuses to do so ...
Re: Configuring Totem Movie Player for TV-Out
Sorry no experience with dual monitors and Totem ....