Today everything is back to normal. No vertical scroll, but now that I know that it is possible to make it work, I want to find out how to make it work!
Now, cat /proc/bus/input/devices gives me this result:
Code: Select all
I: Bus=0019 Vendor=0000 Product=0002 Version=0000
N: Name="Power Button (FF)"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
U: Uniq=
H: Handlers=kbd event0
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button (CM)"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
U: Uniq=
H: Handlers=kbd event1
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
U: Uniq=
H: Handlers=event2
B: EV=21
B: SW=1
I: Bus=0017 Vendor=0001 Product=0001 Version=0100
N: Name="Macintosh mouse button emulation"
P: Phys=
S: Sysfs=/devices/virtual/input/input3
U: Uniq=
H: Handlers=mouse0 event3
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=3
I: Bus=0011 Vendor=0001 Product=0001 Version=ab54
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input4
U: Uniq=
H: Handlers=kbd event4
B: EV=120013
B: KEY=4 2000000 3803078 f800d001 feffffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=7
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Fujitsu FUJ02B1"
P: Phys=FUJ02B1/video/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:07/FUJ02B1:00/input/input5
U: Uniq=
H: Handlers=kbd event5
B: EV=3
B: KEY=10003 0 0 0 0 0 0 0
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/devices/platform/pcspkr/input/input6
U: Uniq=
H: Handlers=kbd event6
B: EV=40001
B: SND=6
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=/video/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:02/input/input7
U: Uniq=
H: Handlers=kbd event7
B: EV=3
B: KEY=3f000b 0 0 0 0 0 0 0
I: Bus=0011 Vendor=0002 Product=0001 Version=0000
N: Name="PS/2 Generic Mouse"
P: Phys=isa0060/serio4/input0
S: Sysfs=/devices/platform/i8042/serio4/input/input8
U: Uniq=
H: Handlers=mouse1 event8
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=3
Any thoughts?
EDIT:
Downloadet tpconfig and ran sudo tpconfig -i in a terminal, here is the result:
Code: Select all
Found Synaptics Touchpad.
Firmware: 8.96 (multiple-byte mode).
Sensor type: unknown (0).
Geometry: rectangular/landscape/up.
Packets: absolute, 80 packets per second.
Corner taps disabled; no tap gestures.
Edge motion: none.
Z threshold: 6 of 7.
2 button mode; corner tap is right button click.