Conky Showoff thread

[tawan]

one on the left for info, one on the right to animate matrix text

[tawan]

The line of the text at the bottom comes from "Fortunes" ${execi 30 fortune -s -n90}

Code: Select all

#  Settings
##############################################
# Use XftD
use_xft yes
xftfont Bauhaus Md BT:size=8
xftalpha 1.0
text_buffer_size 2048
if_up_strictness address

# Update interval in seconds
update_interval 1

# This is the number of times Conky will update before quitting.
# Set to zero to run forever.
total_run_times 0

# Create own window instead of using desktop (required in nautilus)
own_window no
own_window_transparent yes
own_window_type normal
#own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager

# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes

# Minimum size of text area
minimum_size 250
#maximum_width 350

# Draw shadesD
draw_shades no

# Draw outlinesD
draw_outline no

# Draw borders around text
draw_borders no

# Stippled bordersD
stippled_borders 0

# border margins
border_margin 5

# border width
border_width 1

# Default colors and also border colors
default_color 2d788d
color1 5e5e5e
color2 FFFFDD
color3 a90100
#default_shade_color 888888
#default_outline_color 888888
own_window_colour 000000

# Text alignment, other possible values are commented
alignment tm

# Gap between borders of screen and text
# same thing as passing -x at command line
gap_x 0
gap_y 0

# Subtract file system buffers from used memoryD
no_buffers yes

# set to yes if you want all text to be in uppercase
uppercase no

# number of cpu samples to average
# set to 1 to disable averaging
cpu_avg_samples 1

# number of net samples to average
# set to 1 to disable averaging
net_avg_samples 2


# Force UTF8D note that UTF8 support required XFT
override_utf8_locale yes

# Add spaces to keep things from moving aboutD  This only affects certain objects.
use_spacer none

TEXT




${color1}
${alignc 80}${font Rebecca:size=44}${time %I:%M}${font Rebecca:size=22}${time %P}${font}

${alignc 120}${font Rebecca:size=22}${time %A %e %B}${font}
${color}









 ${voffset 5}${font StyleBats:size=17}${if_match ${battery_percent BAT0} <= 20}${color3}O${else}${if_match ${battery_percent BAT0} >= 99}${color2}I${else}${color1}O${endif}${endif}${color1}${font}${voffset -7}  ${font pizzadude bullets:size=12}${if_match ${battery_percent BAT0} >=20}${color2}${else}${color1}${endif}B${if_match ${battery_percent BAT0} >=40}${color2}${else}${color1}${endif}B${if_match ${battery_percent BAT0} >=60}${color2}${else}${color1}${endif}B${if_match ${battery_percent BAT0} >=90}${color2}${else}${color1}${endif}D                                                           ${color1}${if_up wlan0}${if_existing /home/tawan/mybin/conky-on}${if_match ${wireless_link_qual wlan0} >= 80}${color2}${else}${color1}${endif}D${if_match ${wireless_link_qual wlan0} >= 60}${color2}${else}${color1}${endif}B${if_match ${wireless_link_qual wlan0} >= 40}${color2}${else}${color1}${endif}B${if_match ${wireless_link_qual wlan0} >= 20}${color2}${else}${color1}${endif}B${color1}${font}  ${voffset -5}${font pizzadude bullets:size=15}${color1}:${font}${else}${color1}DBBB${font}  ${voffset -6}${font pizzadude bullets:size=15}9${font}${endif}${else}${color1}DBBB${font}  ${voffset -6}${font pizzadude bullets:size=15}9${font}${endif}
 ${voffset 5}${font StyleBats:size=17}${if_match ${acpitemp} >= 70}${color3}p${else}${if_match ${acpitemp} >= 60}${color2}p${else}${color1}p${endif}${endif}${color1}${font}${voffset -7}  ${font pizzadude bullets:size=12}${if_match ${acpitemp} >=40}${color2}${else}${color1}${endif}B${if_match ${acpitemp} >=50}${color2}${else}${color1}${endif}B${if_match ${acpitemp} >=60}${color2}${else}${color1}${endif}B${if_match ${acpitemp} >=70}${color2}${else}${color1}${endif}D                                                           ${color1}${if_up wlan0}${if_existing /home/tawan/mybin/conky-on}${if_match ${upspeedf wlan0 wlan0} >= 80}${color2}${else}${color1}${endif}D${if_match ${upspeedf wlan0 wlan0} >= 40}${color2}${else}${color1}${endif}B${if_match ${upspeedf wlan0 wlan0} >= 10}${color2}${else}${color1}${endif}B${if_match ${upspeedf wlan0 wlan0} >= 5}${color2}${else}${color1}${endif}B${color1}${font}  ${voffset -6}${font pizzadude bullets:size=15}${if_match ${upspeedf wlan0} >= 2}${color2}w${else}${color1}v${endif}${color1}${font}${else}${color1}DBBB${font}  ${voffset -6}${font pizzadude bullets:size=15}9${font}${endif}${else}${color1}DBBB${font}  ${voffset -6}${font pizzadude bullets:size=15}9${font}${endif}
 ${voffset 5}${font StyleBats:size=17}${if_match ${cpu cpu1} >= 90}${color3}a${else}${if_match ${cpu cpu1} >= 40}${color2}a${else}${color1}a${endif}${endif}${color1}${font}${voffset -7}  ${font pizzadude bullets:size=12}${if_match ${cpu cpu1} >=5}${color2}${else}${color1}${endif}B${if_match ${cpu cpu1} >=30}${color2}${else}${color1}${endif}B${if_match ${cpu cpu1} >=60}${color2}${else}${color1}${endif}B${if_match ${cpu cpu1} >=90}${color2}${else}${color1}${endif}D                                                           ${color1}${if_up wlan0}${if_existing /home/tawan/mybin/conky-on}${if_match ${downspeedf wlan0} >= 80}${color2}${else}${color1}${endif}D${if_match ${downspeedf wlan0} >= 40}${color2}${else}${color1}${endif}B${if_match ${downspeedf wlan0} >= 10}${color2}${else}${color1}${endif}B${if_match ${downspeedf wlan0} >= 5}${color2}${else}${color1}${endif}B${color}${font}  ${voffset -6}${font pizzadude bullets:size=15}${if_match ${downspeedf wlan0} >= 2}${color2}s${else}${color1}r${endif}${color1}${font}${else}${color1}DBBB${font}  ${voffset -6}${font pizzadude bullets:size=15}9${font}${endif}${else}${color1}DBBB${font}  ${voffset -6}${font pizzadude bullets:size=15}9${font}${endif}
 ${voffset 5}${font StyleBats:size=17}${if_match ${cpu cpu2} >= 90}${color3}a${else}${if_match ${cpu cpu2} >= 40}${color2}a${else}${color1}a${endif}${endif}${color1}${font}${voffset -7}  ${font pizzadude bullets:size=12}${if_match ${cpu cpu2} >=5}${color2}${else}${color1}${endif}B${if_match ${cpu cpu2} >=30}${color2}${else}${color1}${endif}B${if_match ${cpu cpu2} >=60}${color2}${else}${color1}${endif}B${if_match ${cpu cpu2} >=90}${color2}${else}${color1}${endif}D                                                           ${color1}${if_up wlan0}${if_existing /home/tawan/mybin/conky-on}DBBB${font}  ${voffset -6}${font pizzadude bullets:size=15}${execi 2000 ~/mybin/tawan-check-updates}${font}${else}${color1}DBBB${font}  ${voffset -6}${font pizzadude bullets:size=15}9${font}${endif}${else}${color1}DBBB${font}  ${voffset -6}${font pizzadude bullets:size=15}9${font}${endif}
 ${voffset 5}${font StyleBats:size=17}${if_match ${memperc} >= 80}${color3}y${else}${if_match ${memperc} >= 50}${color2}y${else}${color1}y${endif}${endif}${color1}${font}${voffset -9}  ${offset -2}${font pizzadude bullets:size=12}${if_match ${memperc} >=10}${color2}${else}${color1}${endif}B${if_match ${memperc} >=30}${color2}${else}${color1}${endif}B${if_match ${memperc} >=60}${color2}${else}${color1}${endif}B${if_match ${memperc} >=80}${color2}${else}${color1}${endif}D                                                           ${color1}${if_up wlan0}${if_existing /home/tawan/mybin/conky-on}DBBB${font}  ${voffset -6}${font pizzadude bullets:size=15}${execi 600 ~/mybin/tawan-timed-torrent}${font}${else}${color1}DBBB${font}  ${voffset -6}${font pizzadude bullets:size=15}9${font}${endif}${else}${color1}DBBB${font}  ${voffset -6}${font pizzadude bullets:size=15}9${font}${endif}
 ${voffset 5}${font StyleBats:size=17}${if_match ${fs_used_perc /home/tawan/Data} >= 80}${color3}8${else}${if_match ${diskio /dev/sda} >= 20}${color1}8${else}${color2}8${endif}${endif}${color1}${font}${voffset -8}  ${font pizzadude bullets:size=12}${if_match ${fs_used_perc /home/tawan/Data} >=10}${color2}${else}${color1}${endif}B${if_match ${fs_used_perc /home/tawan/Data} >=30}${color2}${else}${color1}${endif}B${if_match ${fs_used_perc /home/tawan/Data} >=60}${color2}${else}${color1}${endif}B${if_match ${fs_used_perc /home/tawan/Data} >=80}${color2}${else}${color1}${endif}D                                                           ${color1}${if_up wlan0}${if_existing /home/tawan/mybin/conky-on}DBBB${font} ${voffset -20}${font Rebecca:size=29}${execpi 900 python ~/.conky/gmail_parser.py NAME PASSWORD 1}${font}${else}${color1}DBBB${font}  ${voffset -6}${font pizzadude bullets:size=15}9${font}${endif}${else}${color1}DBBB${font}  ${voffset -6}${font pizzadude bullets:size=15}9${font}${endif}





${color1}
${alignc 70}${font Courier New:size=9}${execi 30 fortune -s -n90}${font}
${color}












${if_existing /sys/class/power_supply/ACAD/online 0}${if_match ${battery_percent BAT0} <= 10}${if_match ${battery_percent BAT0} > 6}${execi 300 ~/mybin/tawan-warn-shutdown}${endif}${endif}${if_match ${battery_percent BAT0} <= 6}${execi 200 ~/mybin/tawan-shutdown-now}${endif}${endif}

EDIT: Oh, erm, .. not Mint, it is Debian and Openbox - but this is a conky thread so ..

[vrkalak]

I've had a couple of Linux newbies ask me about my Conky layout recently . . . so I thought, I'd bring the Conky thread into the LinuxMint Forums foreground, again.

I am still using my "single-line across the top" as my Conky layout, as seen in the last couple of posts here.
I've just installed the newer version of Conky and 'tweaked' my .conkyrc files a bit.

If you're interested in compiling/configuring your own Conky . . . you can ask any of us that have a Conky posted.
We're all here to help.

Or check out the official Conky websites > http://conky.sourceforge.net/ and http://conky.linux-hardcore.com/
Also, several of the Ubuntu-based distro Forums have great Conky threads ...
Checkout the Conky Threads in > Ubuntu Forums, CrunchbangLinux Forums, and LinuxMint Forums.

[red-e-made]

Well, I guess I'd be one of the "Linux newbies" vrkalak is talking about. I've been using Mint since Cassandra, but if a newbie is someone who's always learning and asking questions, then I fall solidly under that category.

Anyways, after clicking around gnome-look (surprisingly few xfce conky configs on xfce-look), and making my own modifications, this is what I've come up with:



And here's the .conkyrc configuration:

Code: Select all

#avoid flicker
double_buffer yes

#own window to run simultanious 2 or more conkys
own_window  yes
own_window_transparent yes
own_window_type normal
own_window_hints undecorate,sticky,skip_taskbar,skip_pager

#borders
draw_borders no
border_margin 20

#shades
draw_shades no

#position
gap_x 4
gap_y 10
alignment bottom_right

#behaviour
update_interval 1

#colour
default_color  8f8f8f
#default_shade_color 000000
own_window_colour 000000

#font
use_xft yes
xftfont sans:size=8

# Force UTF8? note that UTF8 support required XFT
override_utf8_locale yes

#to prevent window from moving
use_spacer none
minimum_size 1024 0

#mpd
#mpd_host localhost
#mpd_port 6600

TEXT
${alignr}Kernel: ${color e0e0e0}$kernel${color}  CPU1: ${color e0e0e0}${cpu cpu1}%${color}  CPU2: ${color e0e0e0}${cpu cpu2}%${color}  Ram: ${color e0e0e0}${memperc}%${color}  Root: Free - ${color e0e0e0}${fs_free /}${color} Used - ${color e0e0e0}${fs_used /}${color}  Home: Free - ${color e0e0e0}${fs_free /home}${color} Used - ${color e0e0e0}${fs_used /home}${color}  Data: Free - ${color e0e0e0}${fs_free /home/syameimaru/Desktop/Data}${color} Used - ${color e0e0e0}${fs_used /home/syameimaru/Desktop/Data}${color}

[tawan]

you'll need this image

This is very unlikely to work on anyone elses system without all the scripts it relies on but if you want to take an idea you can look at the code.

Code: Select all

#  Settings
##############################################
# Use XftD
use_xft yes
xftfont Bauhaus Md BT:size=8
xftalpha 1.0
text_buffer_size 2048
if_up_strictness address

# Update interval in seconds
update_interval 1

# This is the number of times Conky will update before quitting.
# Set to zero to run forever.
total_run_times 0

# Create own window instead of using desktop (required in nautilus)
own_window no
own_window_transparent yes
own_window_type desktop
#own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager

# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes

# Minimum size of text area
#minimum_size 350
#maximum_width 350

# Draw shadesD
draw_shades yes

# Draw outlinesD
draw_outline no

# Draw borders around text
draw_borders no

# Stippled bordersD
stippled_borders 0

# border margins
border_margin 5

# border width
border_width 1

# Default colors and also border colors
default_color FFFFDD
#good blue 1994d1
color1 707070
color2 1994d1
color3 a90100
color4 cccccc
#default_shade_color 888888
#default_outline_color 888888
own_window_colour 000000

# Text alignment, other possible values are commented
alignment tl

# Gap between borders of screen and text
# same thing as passing -x at command line
gap_x 0
gap_y 0

# Subtract file system buffers from used memoryD
no_buffers yes

# set to yes if you want all text to be in uppercase
uppercase no

# number of cpu samples to average
# set to 1 to disable averaging
cpu_avg_samples 1

# number of net samples to average
# set to 1 to disable averaging
net_avg_samples 2


# Force UTF8D note that UTF8 support required XFT
override_utf8_locale yes

# Add spaces to keep things from moving aboutD  This only affects certain objects.
use_spacer none

TEXT
${image image.png -p 0,4}
${goto 8}${color1}${voffset -20}${font Rebecca:size=84}${execpi 900 python ~/.conky/gmail_parser.py NAME PASSWORD 1}${font}    ${goto 95}${voffset -49}${font pizzadude bullets:size=48}${if_match ${upspeedf wlan0} >= 20}${color2}w${else}${if_match ${upspeedf wlan0} >= 2}${color2}v${else}${color1}v${endif}${endif}${color1}    ${goto 174}${if_match ${downspeedf wlan0} >= 40}${color2}s${else}${if_match ${downspeedf wlan0} >= 2}${color2}r${else}${color1}r${endif}${endif}${color1}    ${goto 357}${execpi 5000 ~/mybin/tawan-check-updates}    ${goto 440}${font StyleBats:size=52}${voffset 5}${if_match ${acpitemp} >= 70}${color3}${else}${if_match ${acpitemp} >= 60}${color2}${else}${color1}${endif}${endif}p${color1}    ${goto 520}${if_match ${battery_percent BAT0} <= 20}${color3}${else}${color2}${endif}${if_existing /sys/class/power_supply/ACAD/online 1}${color1}I${else}O${endif}    ${goto 258}${font StyleBats:size=16}${voffset -4}${if_match ${fs_used_perc /home/tawan/Data} >= 75}${color3}${else}${if_match ${diskio /dev/sda} >= 1}${color2}${else}${color1}${endif}G${endif}${color1}    ${goto 279}${voffset 2}${if_match ${memperc} >= 80}${color3}${else}${if_match ${memperc} >= 40}${color2}${else}${color1}${endif}${endif}y${color1}    ${goto 300}${voffset -2}${if_match ${cpu cpu1} >= 90}${color3}${else}${if_match ${cpu cpu1} >= 40}${color2}${else}${color1}${endif}${endif}l${color1}    ${goto 319}${if_match ${cpu cpu2} >= 90}${color3}${else}${if_match ${cpu cpu2} >= 40}${color2}${else}${color1}${endif}${endif}l${color1}    ${goto 600}${voffset -30}${color2}${font Radio space:size=32}${time %R}${font}
${goto 603}${color4}${font Jura:size=8}${time %A %e%b %Y}${font}${color}

























































${if_existing /sys/class/power_supply/ACAD/online 0}${if_match ${battery_percent BAT0} <= 11}${if_match ${battery_percent BAT0} > 8}${execi 300 ~/mybin/tawan-warn-shutdown}${endif}${endif}${if_match ${battery_percent BAT0} <= 8}${execi 200 ~/mybin/tawan-shutdown-now}${endif}${endif}
${execi 600 ~/mybin/tawan-timed-torrent}

[tinman]

Here's mine... sorry to admins and moderators for starting athread without searching

Code: Select all

own_window yes
own_window_hints undecorated,below,skip_taskbar
background no
double_buffer yes
use_spacer right
use_xft yes
update_interval 2.0
minimum_size 400 5
maximum_width 260 300
#maximum_size 200 5
# Draw shades?
draw_shades yes
draw_outline yes # amplifies text if yes
draw_borders no
uppercase no # set to yes if you want all text to be in uppercase
stippled_borders 8

border_margin 4
border_width 1
default_color white
default_shade_color black
default_outline_color black
own_window_colour brown
own_window_transparent yes
alignment top_right
#alignment bottom_left
#alignment bottom_right
gap_x 10
gap_y 10
override_utf8_locale no
xftfont monospace:bold:size=8
xftalpha 0.8
TEXT
${offset 43}${font infected::size=36}${color slate grey}${alignc}tinman${font}

${offset 0}${color slate grey}OS: ${color }$sysname
${offset 0}${color slate grey}Distro: ${color }${exec cat /etc/issue |awk '{print $1}' |sed -n '1p'}
${offset 0}${color slate grey}Arch: ${color }${exec uname -m}
${offset 0}${color slate grey}User: ${color }${exec whoami}
${offset 0}${color slate grey}Host: ${color }$nodename
${offset 0}${color slate grey}Kernel: ${color }$kernel
${offset 0}${color slate grey}HDD Temp: ${color }${hddtemp /dev/sda}C
${offset 0}${color slate grey}CPU Temp: ${color }${exec /usr/bin/sensors |grep Core0 |awk '{print $3}' |sed 's/°C//'} C
${offset 0}${color slate grey}CPU Freq: ${color }$freq_g Ghz ($freq)
${offset 0}${color slate grey}CPU Usage ${color }$cpu%
#${offset 0}${cpugraph 35,250 000000 ffffff}
${offset 0}${color slate grey}Highest CPU:
${offset 0}${color ddaa00} ${top name 1} ${top cpu 1}
${offset 0}${color lightgrey} ${top name 2} ${top cpu 2}
${offset 0}${color lightgrey} ${top name 3} ${top cpu 3}
${offset 0}${color lightgrey} ${top name 4} ${top cpu 4}
${offset 0}${color lightgrey} ${top name 5} ${top cpu 5}

${offset 0}${color slate grey}Highest MEM:
${offset 0}${color ddaa00} ${top_mem name 1} ${top_mem mem 1}
${offset 0}${color lightgrey} ${top_mem name 2} ${top_mem mem 2}
${offset 0}${color lightgrey} ${top_mem name 3} ${top_mem mem 3}
${offset 0}${color lightgrey} ${top_mem name 4} ${top_mem mem 4}
${offset 0}${color lightgrey} ${top_mem name 5} ${top_mem mem 5}

${offset 0}${color slate grey}Mem: ${color } $memperc% $mem/ $memmax
${offset 0}${membar 4,250}
${offset 0}${color slate grey}Swap: ${color }$swapperc% $swap/ $swapmax
${offset 0}${swapbar 4,250}
${offset 0}${color slate grey}Root: (${fs_type /root}) ${color }${fs_free /} / ${fs_size /}
${offset 0}${fs_bar 4,250 /}
${offset 0}${color slate grey}Big: (${fs_type /media/Big}) ${color }${fs_free /media/Big} / ${fs_size /media/Big}
${offset 0}${fs_bar 4,250 /media/Big}
${offset 0}${color slate grey}HDD Read: ${color }${diskio_read sda}
${offset 0}${diskiograph_read sda 27,250 000000 ffffff}
${offset 0}${color slate grey}HDD Write: ${color }${diskio_write sda}
${offset 0}${diskiograph_write sda 27,250 000000 ffffff}
${offset 0}${color slate grey}Network Traffic: IP Address:
${offset 0}${color slate grey}Up: ${color }${upspeed eth0} ${addr eth0}
#${offset 0}${upspeedgraph wlan0 27,250 000000 ffffff}
#${offset 0}${color slate grey}Down: ${color }${downspeed wlan0}${color}
#${offset 0}${downspeedgraph wlan0 27,250 000000 ffffff

it's stolen ...but hey sharing is life

[vrkalak]

It's been a months since the last post was made to this topic!!! I know that many people are making new and great looking Conky set-ups. Let's see them.



Latest/updated screenshot of my #!Crunchbang/Linux desktop and new Conky layout/set-up. Still, dark, minimal and pleasing on the eye

#!Statler with Sid repros, 2.6.35-2 kernel ... and I finally got my new Conky where I want it. I think.

Everyone loves the Conky > Word Clock

Conky Artists Group over at DeviantART >> http://conky-artists-group.deviantart.com/
Great new things about Conky and many of the Conky developers are there, too.

[colyn]

I finally got a working Conky that even displays cpu temp and fan rpm..

Code: Select all

# Simple Conky by Colyn Goodson
# Created on Aug 20, 2010
#Modified on Aug 21, 2010
double_buffer no
alignment top_right
border_width 1
cpu_avg_samples 2
default_color red
default_outline_color white
default_shade_color red
draw_borders no
draw_graph_borders yes
draw_outline no
draw_shades no
use_xft yes
xftfont DejaVu Sans Mono:size=12
gap_x 5
gap_y 60
minimum_size 5 5
net_avg_samples 2
no_buffers yes
out_to_console no
out_to_stderr no
extra_newline no
own_window no
own_window_transparent yes
own_window_class Conky
own_window_type override
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
background no
stippled_borders 0
update_interval 1.0
uppercase no
use_spacer none
show_graph_scale no
show_graph_range no

TEXT
$hr
Colyn's
$nodename - $sysname $kernel on $machine
$hr
${color white}Uptime:$color $uptime
${color white}CPU Frequency (in MHz):$color $freq
${color white}CPU Frequency (in GHz):$color $freq_g
${color white}RAM Usage:$color $mem/$memmax - $memperc% ${membar 4}
${color white}Swap Usage:$color $swap/$swapmax - $swapperc% ${swapbar 4}
${color white}CPU Usage:$color $cpu% ${cpubar 4}
${color white}CPU1 Temp:$color ${hwmon 0 temp 1}°C ${color white}CPU Fan: $color ${hwmon 0 fan 1} rpm
${color white}CPU2 Temp:$color ${hwmon 0 temp 3}°C ${color white}Vent Fan: $color ${hwmon 0 fan 2} rpm
$hr
${color white}Hard Drive Temp: $color ${execi 10 nc localhost 7634 | cut -c27-28 ;}°C
$hr
${color white}Processes:$color $processes  ${color white}Running:$color $running_processes
$hr
${color white}File systems:
 / $color${fs_used /}/${fs_size /} ${fs_bar 6 /}
$hr


And here is my sample Conky desktop. I made a few mods to add hddtemp to the mix.

[Pilosopong Tasyo]

My conky-fied desktop. Nothing fancy, just some important stuff I need to be notified of on a regular basis. The last two sections (recent time actions and remaining time) are used to monitor the status of the netcafé timer I wrote last month (using bash scripts).

custom-timer-controlling-station.png

Conky settings:

Code: Select all

alignment top_right
cpu_avg_samples 2
double_buffer yes
draw_shades yes
gap_x 15
gap_y 240
net_avg_samples 2
own_window yes
own_window_type override
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
update_interval 0.5
use_xft yes

TEXT
${offset 60}${font HeaveneticaBoxed:bold:size=14}${color white}LinuxMint9
${offset 70}${font Arial:bold:size=11}${color white}${voffset -5}${hr 2}${voffset 5}
${alignr}${font Arial:bold:size=11}${color white}${sysname}-${kernel}
${alignr}${font Arial:bold:size=11}${color white}${voffset 2}${nodename} @ ${uptime}${voffset -2}
${voffset -80}${font OpenLogos:size=80}${color white}t${voffset -110}
#
${font Arial:bold:size=12}${color orange}system ${hr 2}
${font Arial:bold:size=11}${color white}${tab 10}cpu1 ${color cyan}${cpu cpu1}%${alignr}${cpu cpu2}%${color white} cpu2
${font Arial:bold:size=11}${color white}${tab 10}${cpugraph cpu1 35,100 00FF00 FFFF00}${alignr}${cpugraph cpu2 35,100 FF0000 FFFF00}
${font Arial:bold:size=11}${color white}${alignc}ram ${color cyan}${mem} (${memperc}%)
${font Arial:bold:size=11}${color white}${tab 10}${memgraph 35,0 0000FF FFFF00}
#
${font Arial:bold:size=12}${color orange}network ${hr 2}
${font Arial:bold:size=11}${color white}${alignc}public ip ${color cyan}${execi 300 /.x/admin.tools/CLI/conky/get.public.ip.address.sh}
${font Arial:bold:size=11}${color white}${tab 10}${downspeedgraph wlan0 35,100 00FF00 FFFF00}${alignr}${upspeedgraph wlan0 35,100 FF0000 FFFF00}
${font Arial:bold:size=11}${color white}${tab 10}dn ${color cyan}${downspeed wlan0}${alignr}${upspeed wlan0}${color white} up
#
${font Arial:bold:size=12}${color orange}recent timer actions ${hr 2}
${font Arial:bold:size=11}${color white}${tab 10}${execi 5 tail -n 5 /.x/admin.tools/CLI/config/actions.log}
#
${font Arial:bold:size=12}${color orange}remaining time ${hr 2}
${font Arial:bold:size=11}${color white}${tab 10}${execi 5 /.x/admin.tools/CLI/conky/get.time.statistics.sh}


[colyn]

I'm still tweaking my conky...

So here's another look.




And here's the .conkyrc file.

Code: Select all

# Simple Conky by Colyn Goodson
# Created on Aug 20, 2010
#Modified on Aug 22, 2010
###Conky
double_buffer yes
alignment top_right
border_width 1
cpu_avg_samples 2
default_color yellow
default_outline_color gray
default_shade_color gray
draw_borders no
draw_graph_borders yes
draw_outline no
draw_shades no
use_xft yes
xftfont DejaVu Sans Mono:size=9
gap_x 10
gap_y 10
minimum_size 5 5
net_avg_samples 2
no_buffers yes
out_to_console no
out_to_stderr no
extra_newline no
own_window yes
own_window_transparent yes
own_window_class Conky
own_window_type normal
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
background yes
stippled_borders 0
update_interval 1.0
uppercase no
use_spacer none
show_graph_scale no
show_graph_range no

TEXT
${#00ffff}$nodename - $sysname $kernel on $machine
$hr
${color #ff0000}Uptime:$color $uptime

${color #ff0000}CPU Frequency (in MHz):$color $freq

${color #ff0000}CPU Frequency (in GHz):$color $freq_g

${color #ff0000}RAM Usage:$color $mem/$memmax - $memperc% ${membar 4}

${color #ff0000}Swap Usage:$color $swap/$swapmax - $swapperc% ${swapbar 4}

${color #ff0000}CPU Usage:$color $cpu% ${cpubar 4}

${color #ff0000}CPU1 Temp:$color ${hwmon 0 temp 1}°C ${color #ff0000}CPU Fan: $color ${hwmon 0 fan 1} rpm

${color #ff0000}CPU2 Temp:$color ${hwmon 0 temp 3}°C ${color #ff0000}Vent Fan: $color ${hwmon 0 fan 2} rpm

${color #ff0000}Hard Drive Temp: $color ${execi 10 nc localhost 7634 | cut -c27-28 ;}°C

${color #ff0000}Processes:$color $processes  ${color #ff0000}Running:$color $running_processes

${color #ff0000}File systems:/       $color ${fs_used /}/${fs_size /}${alignr}${fs_used_perc /}%
${fs_bar 6 /}

${color #ff0000}Networking:
Up:$color ${upspeed eth0}  - ${color #ff0000} Down: $color ${downspeed eth0}

${color #ff0000}Name              PID   CPU%   MEM%
 $color ${top name 1} ${top pid 1} ${top cpu 1} ${top mem 1}
 ${top name 2} ${top pid 2} ${top cpu 2} ${top mem 2}
 ${top name 3} ${top pid 3} ${top cpu 3} ${top mem 3}
 ${top name 4} ${top pid 4} ${top cpu 4} ${top mem 4}

${color #ff00ff}$alignc Colyn's Linux Mint 9 KDE

${color #00ffff}${time %k:%M:%S}${alignr}${Time %A %m / %d / %Y}
$hr


[colyn]

I have done several remakes of my .conkyrc and currently am using the one just above this post. One problem I am having is how to make it transparent. If I set double_buffer to no and own_window to no it becomes transparent but will flicker every few seconds. If I set own_window to no and double_buffer to yes the whole desktop goes black.

EDIT:

I just got it figured out.

I had to re-configure the window settings to

Code: Select all

own_window yes
own_window_transparent no
own_window_argb_visual yes
own_window_argb_value 0
own_window_class Conky
own_window_type normal
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
background yes

I added the lines

Code: Select all

 own_window_argb_visual yes
own_window_argb_value 0

and then set

Code: Select all

own_window_transparent to no

[tawan]

I have not made a conky for Mint yet, here is my one on my Arch install...

[mintmaniac2]

Here are my two conkys.

Code: Select all

background yes
use_xft yes
xftfont HandelGotD:size=8
xftalpha 0.5
out_to_console no
out_to_stderr no
extra_newline no
update_interval 1.0
total_run_times 0
own_window yes
own_window_type override
own_window_transparent yes
double_buffer yes
minimum_size 170 5
maximum_width 220
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders yes
uppercase no
default_color ffffff
alignment top_right
gap_x 5
gap_y 5
no_buffers yes
cpu_avg_samples 2
override_utf8_locale no
color1 FB9845
color2 E86D27
color5 red
TEXT
${voffset 2}${font Arial Black:style=Bold:size=12}${alignc}${color 7CDB32}Linux Mint 9 "Isadora"
${color}${font OpenLogos:size=16}t${font}   Kernel:  ${alignr}${sysname}${kernel}
        ${color}HostName: ${alignr}${nodename}
        Architecture: ${alignr}${machine}
${color}${font StyleBats:size=16}P${font}   Updates: ${alignr}${execi 300 ~/Bin/debupdates.sh}
${color}${font StyleBats:size=16}A${font}   CPU: ${cpu cpu0}% ${alignr}${cpubar cpu0 8,60 C34723}
${color}${font StyleBats:size=16}A${font}   CPU1: ${cpu cpu1}% ${alignr}${cpubar cpu1 8,60 FB9845}
${color}${font StyleBats:size=16}A${font}   CPU2: ${cpu cpu2}% ${alignr}${cpubar cpu2 8,60 FB9845}
${color}${font StyleBats:size=16}K${color}${font}   Temp: ${alignr}${hwmon temp 1}°C
${color}${font StyleBats:size=16}g${font}   RAM: $memperc% ${alignr}${membar 8,60 FB9845}
${color}${font StyleBats:size=16}j${font}   SWAP: $swapperc% ${alignr}${swapbar 8,60 C34723}
${color}${font StyleBats:size=16}h${font}   Processes: ${alignr}${processes}
${color}${font StyleBats:size=16}q${font}   Uptime: ${alignr}${uptime}
${color}${font StyleBats:size=16}q${font}   Time: ${alignr}${color1}${time %H:%M:%S} ${color2}${time %d/%m/%y}

${color2}PROCESSES ${color}${hr 2}

NAME ${alignr} PID ${alignr}CPU% MEM%
${color1}${top name 1} ${alignr} ${top pid 1}${top cpu 1}${top mem 1}
${color}${top name 2} ${alignr} ${top pid 2}${top cpu 2}${top mem 2}
${color}${top name 3} ${alignr} ${top pid 3}${top cpu 3}${top mem 3}
${color}${top name 4} ${alignr} ${top pid 4}${top cpu 4}${top mem 4}
${color}${top name 5} ${alignr} ${top pid 5}${top cpu 5}${top mem 5}
${color}${top name 6} ${alignr} ${top pid 6}${top cpu 6}${top mem 6}

${color2}NETWORK ${color}${hr 2}

${color}${voffset -6}${font PizzaDude Bullets:size=14}O${font}  Up: ${upspeed eth1} ${color}${alignr}${upspeedgraph eth1 8,60 C34723 FB9845}
${color}${voffset 4}${font PizzaDude Bullets:size=14}U${font}   Down: ${downspeed eth1} ${color}${alignr}${downspeedgraph eth1 8,60 C34723 FB9845}
${color}${voffset 4}${font PizzaDude Bullets:size=14}N${font}   Upload: ${alignr}${totalup eth1}
${color}${voffset 4}${font PizzaDude Bullets:size=14}T${font}   Download: ${alignr}${totaldown eth1}
${color}${voffset 4}${font PizzaDude Bullets:size=14}a${font}   Local Ip: ${alignr}${addr eth1}

  ${color}Outbound Connection ${alignr} Remote Service/Port
  ${color1}${tcp_portmon 32768 61000 rhost 0} ${alignr} ${tcp_portmon 32768 61000 rservice 0}
  ${color}${tcp_portmon 32768 61000 rhost 1} ${alignr} ${tcp_portmon 32768 61000 rservice 1}
  ${tcp_portmon 32768 61000 rhost 2} ${alignr} ${tcp_portmon 32768 61000 rservice 2}
  ${tcp_portmon 32768 61000 rhost 3} ${alignr} ${tcp_portmon 32768 61000 rservice 3}
  ${tcp_portmon 32768 61000 rhost 4} ${alignr} ${tcp_portmon 32768 61000 rservice 4}

${color2}FORTUNE ${hr 2}

${color}${alignc}${execi 120 fortune -s | fold -w36}




Code: Select all

background yes
use_xft yes
xftfont HandelGotD:size=8
xftalpha 0.5
out_to_console no
out_to_stderr no
extra_newline no
update_interval 1.0
total_run_times 0
own_window yes
own_window_type override
own_window_transparent yes
double_buffer yes
maximum_width 1036
minimum_size 8,1024
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders yes
uppercase no
default_color ffffff
alignment top_middle
gap_x 5
gap_y 5
no_buffers yes
cpu_avg_samples 2
override_utf8_locale no
color white
TEXT
${color}CPU1: ${cpugraph cpu1 8,60 C34723 FB9845} | CPU2: ${cpugraph cpu2 8,60 C34723 FB9845} | RAM: ${memgraph 8,60 C34723 FB9845} SWAP: ${swapbar 8,60 C34723 FB9845}| Used Disk '/': ${color1}${fs_used /} ${color}${fs_bar 8,60 /} ${color}| Free Disk '/': ${color1}${fs_free /} ${color}${fs_bar_free 8,60 /}${color} | Available Disk '/': ${fs_size /}
${alignc}Distro Ranking: ${execi 3600 ~/Bin/ranking.py}

[safetycopy]

I have not made a conky for Mint yet, here is my one on my Arch install...

Very nice!

[mintmaniac2]

this thread us dying out. maybe we need some1 to reignite it

[vrkalak]

As requested here is the Script for the Word Clock Conky.

Code: Select all

# [b]conky configuration[/b]
#
# The list of variables has been removed from this file in favour
# of keeping the documentation more maintainable.
#
# Check http://conky.sf.net for an up-to-date-list.
#
# Enjoy! :)
##############################################
#  Settings
##############################################
background yes
use_xft yes
xftfont Sans-Serif:size=12
xftalpha 1
update_interval 1.0
total_run_times 0
own_window yes
own_window_transparent yes
own_window_type desktop
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
double_buffer yes
minimum_size 200 200
maximum_width 240
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders yes
default_color white
#default_shade_color black
default_outline_color white
alignment middle_right
gap_x 30
gap_y 20
no_buffers yes
uppercase no
cpu_avg_samples 2
override_utf8_locale no
color1 222222

TEXT
${font Sans-Serif:bold:size=12}
${color}I T ${color1}L ${color}I S ${color1}A S T I M E
${if_match ${exec date +"%M"} < 35}${if_match ${exec date +"%M"} >= 15}${if_match ${exec date +"%M"} < 20}${color}${endif}${endif}A ${color1}C ${if_match ${exec date +"%M"} >= 15}${if_match ${exec date +"%M"} < 20}${color}${endif}${endif}Q U A R T E R ${color1}D C
${if_match ${exec date +"%M"} >= 20}${if_match ${exec date +"%M"} < 30}${color}${endif}${endif}T W E N T Y ${if_match ${exec date +"%M"} >= 25}${if_match ${exec date +"%M"} < 30}${color}${endif}${else}${color1}${endif}${if_match ${exec date +"%M"} >= 5}${if_match ${exec date +"%M"} < 10}${color}${endif}${endif}F I V E ${color1}X
${if_match ${exec date +"%M"} >= 30}${if_match ${exec date +"%M"} < 35}${color}${endif}${endif}H A L F ${color1}B ${if_match ${exec date +"%M"} >= 10}${if_match ${exec date +"%M"} < 15}${color}${endif}${endif}T E N ${color1}F T O
${else}${if_match ${exec date +"%M"} >= 45}${if_match ${exec date +"%M"} < 50}${color}${endif}${endif}A ${color1}C ${if_match ${exec date +"%M"} >= 45}${if_match ${exec date +"%M"} < 50}${color}${endif}${endif}Q U A R T E R ${color1}D C
${if_match ${exec date +"%M"} >= 35}${if_match ${exec date +"%M"} < 45}${color}${endif}${endif}T W E N T Y ${if_match ${exec date +"%M"} < 40}${if_match ${exec date +"%M"} >= 35}${color}${endif}${else}${color1}${endif}${if_match ${exec date +"%M"} >= 55}${color}${endif}F I V E ${color1}X
H A L F B ${if_match ${exec date +"%M"} >= 50}${if_match ${exec date +"%M"} < 55}${color}${endif}${endif}T E N ${color1}F ${color}T O${color1}
${endif}${if_match ${exec date +"%M"} < 35}${if_match ${exec date +"%M"} > 5}${color}${endif}${endif}P A S T ${color1}E R U ${if_match ${exec date +"%M"} < 35}${if_match ${exec date +"%I"} == 9}${color}${else}${color1}${endif}N I N E
${if_match ${exec date +"%I"} == 1}${color}${else}${color1}${endif}O N E ${if_match ${exec date +"%I"} == 6}${color}${else}${color1}${endif}S I X ${if_match ${exec date +"%I"} == 3}${color}${else}${color1}${endif}T H R E E
${if_match ${exec date +"%I"} == 4}${color}${else}${color1}${endif}F O U R ${if_match ${exec date +"%I"} == 5}${color}${else}${color1}${endif}F I V E ${if_match ${exec date +"%I"} == 2}${color}${else}${color1}${endif}T W O
${if_match ${exec date +"%I"} == 8}${color}${else}${color1}${endif}E I G H T ${if_match ${exec date +"%I"} == 11}${color}${else}${color1}${endif}E L E V E N
${if_match ${exec date +"%I"} == 7}${color}${else}${color1}${endif}S E V E N ${if_match ${exec date +"%I"} == 12}${color}${else}${color1}${endif}T W E L V E
${if_match ${exec date +"%I"} == 10}${color}${else}${color1}${endif}T E N ${else}${if_match ${exec date +"%I"} == 8}${color}${else}${color1}${endif}N I N E
${if_match ${exec date +"%I"} == 12}${color}${else}${color1}${endif}O N E ${if_match ${exec date +"%I"} == 5}${color}${else}${color1}${endif}S I X ${if_match ${exec date +"%I"} == 2}${color}${else}${color1}${endif}T H R E E
${if_match ${exec date +"%I"} == 3}${color}${else}${color1}${endif}F O U R ${if_match ${exec date +"%I"} == 4}${color}${else}${color1}${endif}F I V E ${if_match ${exec date +"%I"} == 1}${color}${else}${color1}${endif}T W O
${if_match ${exec date +"%I"} == 7}${color}${else}${color1}${endif}E I G H T${if_match ${exec date +"%I"} == 10}${color}${else}${color1}${endif} E L E V E N
${if_match ${exec date +"%I"} == 6}${color}${else}${color1}${endif}S E V E N${if_match ${exec date +"%I"} == 11}${color}${else}${color1}${endif} T W E L V E
${if_match ${exec date +"%I"} == 9}${color}${else}${color1}${endif}T E N ${endif}${color1}S E ${if_match ${exec date +"%M"} < 5}${color}${endif}O C L O C K
${color}${if_running mocp}${font Sans-Serif:bold:size=8}MUSIC ${hr 2}
${font Sans-Serif:normal:size=8}${execi 10 mocp -Q '%song\n%artist\n%album'}
${execbar mocp -Q '%cs/%ts*100' | bc -l}
${endif}


${image ~/.2164.png -p 65,270 -s 100x100}


${color1}${font Sans-Serif:bold:size=12}Host:${alignr}$nodename
OS:${alignr}Debian Sid
DE/WM:${alignr}Openbox
Kernel:${alignr}$kernel
Freq:$alignr${freq_g}GHz
${hr 2}
RAM:$alignr$memperc%
CPU1:$alignr${cpu cpu1}%
CPU2:$alignr${cpu cpu2}%
SWAP:$alignr$swap/$swapmax
HD:$alignr${fs_used /}/${fs_size /}
Uptime:$alignr${uptime}
${hr 2}
U/L Speed:$alignr${upspeed eth0}
D/L Speed:$alignr${downspeed eth0}
${hr 2}


To add an 'icon' to your Conky you, first, need to add the icon image as a new ~/. file (to make it hidden) . . . as in: ${image ~/.2164.png -p 65,270 -s 100x100}
These numbers are for positioning the icon, within the Conky > 65,270
This is for the size of the icon > 100x100

[mmesantos1]

Well my first post in the Conky thread, not any thing special but it works. And also would like to say some very nice conkyrc files in this thread.

Code: Select all

#avoid flicker
double_buffer yes

#own window to run simultanious 2 or more conkys
#own_window  yes
#own_window_transparent yes
#own_window_type normal
#own_window_hints undecorate,sticky,skip_taskbar,skip_pager

#borders
draw_borders no
border_margin 1

#shades
draw_shades no

#position
gap_x 0
gap_y 30
alignment top_middle

#behaviour
update_interval 02

#colour
default_color  White

#default_shade_color 000000
own_window_colour 3d352a

#font
use_xft yes
xftfont gelly:pixelsize=11

#to prevent window from moving
use_spacer no
minimum_size 875 0

TEXT
${alignc}Kernel: ${color White}$kernel   |  ${color} Up: ${color White}${uptime_short}   |   ${color}Cpu: ${color White}${cpu}%   ${color}${cpugraph 10,80 White 9F907D} ${color White}    |   ${color }Mem: ${color White}$mem/$memmax - $memperc% ${color} ${membar 8,80}${color White}    |   ${color }Net: ${color White}${font}${downspeed eth1} Kb/s ${color}  ${downspeedgraph eth1 10,80 White 9F907D}  ${color White} ${totaldown eth1} down   |   ${color White}${upspeed eth1} Kb/s ${color} ${upspeedgraph eth1 10,80 White 9F907D}  ${color White}${totalup eth1} up   |   ${alignc} ${color }Root: ${color White}${font}${fs_free /}  / ${fs_size /} - ${fs_free_perc /}%

[M4570D0N]

Ok, so I posted my current set up a few pages back:
viewtopic.php?f=6&t=10828&start=3420#p313482

I was wondering if I might be able to get some feedback on my conky config. I cannot recall or find where I originally found the conkyrc off which my conkyrc is based. As it is now though, each section (network, memory, weather, etc) is drawn in its own window with a separate conkyrc file and then all 5 are called up on start up with a simple shell script. Is there an easier way (perhaps with a lua script?) to configure this so that it's just one conkyrc file rather than 5?

here's the files:

.conkyrc

Code: Select all

# conky configuration
#
# The list of variables has been removed from this file in favour
# of keeping the documentation more maintainable.
# Check http://conky.sf.net for an up-to-date-list.
#
# For ideas about how to modify conky, please see:
# http://crunchbanglinux.org/forums/topic/59/my-conky-config/
#
# For help with conky, please see:
# http://crunchbanglinux.org/forums/topic/2047/conky-help/
#
# Enjoy! :)
##############################################
#  Settings
##############################################
background no
use_xft yes
xftfont Sans:size=9
xftalpha 1
update_interval 1.0
total_run_times 0
own_window yes
own_window_transparent yes
own_window_type override
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
double_buffer yes
minimum_size 100 50
maximum_width 240
draw_shades yes
draw_outline no
draw_borders no
draw_graph_borders no
default_color white
default_shade_color black
default_outline_color white
# custom colors #######################################################
color0 FFFFFF
color1 F5F5F5
color2 A2AEC6
color3 696969
color4 D3D3D3
color5 6495ED
color6 87CEFA
color7 5F9EA0
color8 BBBBBB
color9 61A8FF

alignment middle_right
gap_x 80
gap_y 100
no_buffers yes
uppercase no
cpu_avg_samples 2
override_utf8_locale yes
##############################################
#  Output
##############################################
TEXT
${color9}${font Americana BT:size=16}${alignc}Cerebral Automation
${color9}${font Americana BT:size=13}Speed$alignr${freq_g} GHz
${color9}${font Americana BT:size=13}CPU:${alignr}${cpu cpu0}%${font}
${color9}${cpubar cpu0 8,130}
${color9}${font Americana BT:size=13}Temp:${alignr}${execi 4 sensors | grep -A 0 'Core 0' | cut -c15-18}°C${font}

${color9}${font Americana BT:size=13}CPU:${alignr}${cpu cpu1}%${font}
${color9}${cpubar cpu1 8,130}
${color9}${font Americana BT:size=13}Temp:${alignr}${execi 4 sensors | grep -A 0 'Core 1' | cut -c15-18}°C

.conkyrc-mem

Code: Select all

# conky configuration
#
# The list of variables has been removed from this file in favour
# of keeping the documentation more maintainable.
# Check http://conky.sf.net for an up-to-date-list.
#
# For ideas about how to modify conky, please see:
# http://crunchbanglinux.org/forums/topic/59/my-conky-config/
#
# For help with conky, please see:
# http://crunchbanglinux.org/forums/topic/2047/conky-help/
#
# Enjoy! :)
##############################################
#  Settings
##############################################
background no
use_xft yes
xftfont Sans:size=8
xftalpha 1
update_interval 1.0
total_run_times 0
own_window yes
own_window_transparent yes
own_window_type override
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
double_buffer yes
minimum_size 100 50
maximum_width 180
draw_shades yes
draw_outline no
draw_borders no
draw_graph_borders no
default_color white
default_shade_color black
default_outline_color white
# custom colors #######################################################
color0 FFFFFF
color1 F5F5F5
color2 A2AEC6
color3 696969
color4 D3D3D3
color5 6495ED
color6 87CEFA
color7 5F9EA0
color8 BBBBBB
color9 61A8FF

alignment top_left
gap_x 150
gap_y 55
no_buffers yes
uppercase no
cpu_avg_samples 2
override_utf8_locale yes
##############################################
#  Output
##############################################
TEXT
${color9}${font Americana BT:size=16}${alignc}Memory
${font Americana BT:size=12}RAM:$alignr$mem/$memmax${font}
${membar 8,180}
${font Americana BT:size=12}Swap:$alignr$swap/$swapmax${font}
${swapbar 8,180}

.conkyrc-hd

Code: Select all

# conky configuration
#
# The list of variables has been removed from this file in favour
# of keeping the documentation more maintainable.
# Check http://conky.sf.net for an up-to-date-list.
#
# For ideas about how to modify conky, please see:
# http://crunchbanglinux.org/forums/topic/59/my-conky-config/
#
# For help with conky, please see:
# http://crunchbanglinux.org/forums/topic/2047/conky-help/
#
# Enjoy! :)
##############################################
#  Settings
##############################################
background no
use_xft yes
xftfont Sans:size=8
xftalpha 1
update_interval 1.0
total_run_times 0
own_window yes
own_window_transparent yes
own_window_type override
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
double_buffer yes
minimum_size 100 50
maximum_width 200
draw_shades yes
draw_outline no
draw_borders no
draw_graph_borders no
default_color white
default_shade_color black
default_outline_color white
# custom colors #######################################################
color0 FFFFFF
color1 F5F5F5
color2 A2AEC6
color3 696969
color4 D3D3D3
color5 6495ED
color6 87CEFA
color7 5F9EA0
color8 BBBBBB
color9 61A8FF


.conkyrc-net

Code: Select all

# conky configuration
#
# The list of variables has been removed from this file in favour
# of keeping the documentation more maintainable.
# Check http://conky.sf.net for an up-to-date-list.
#
# For ideas about how to modify conky, please see:
# http://crunchbanglinux.org/forums/topic/59/my-conky-config/
#
# For help with conky, please see:
# http://crunchbanglinux.org/forums/topic/2047/conky-help/
#
# Enjoy! :)
##############################################
#  Settings
##############################################
background no
use_xft yes
xftfont Sans:size=8
xftalpha 1
update_interval 1.0
total_run_times 0
own_window yes
own_window_transparent yes
own_window_type override
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
double_buffer yes
minimum_size 150 50
maximum_width 180
draw_shades yes
draw_outline no
draw_borders no
draw_graph_borders no
default_color white
default_shade_color black
default_outline_color white
# custom colors #######################################################
color0 FFFFFF
color1 F5F5F5
color2 A2AEC6
color3 696969
color4 D3D3D3
color5 6495ED
color6 87CEFA
color7 5F9EA0
color8 BBBBBB
color9 61A8FF

alignment middle_left
gap_x 150
gap_y -85
no_buffers yes
uppercase no
cpu_avg_samples 2
override_utf8_locale yes
##############################################
#  Output
##############################################
TEXT
${color9}${font Americana BT:size=16}${alignc}Network
${color9}${font Americana BT:size=12}Down:${alignr}${downspeedf wlan0} kb/s${font}
${font Americana BT:size=12}Up:${alignr}${upspeedf wlan0} kb/s${font}${color}

.conkyrc-weather

Code: Select all

# conky configuration
#
# The list of variables has been removed from this file in favour
# of keeping the documentation more maintainable.
# Check http://conky.sf.net for an up-to-date-list.
#
# For ideas about how to modify conky, please see:
# http://crunchbanglinux.org/forums/topic/59/my-conky-config/
#
# For help with conky, please see:
# http://crunchbanglinux.org/forums/topic/2047/conky-help/
#
# Enjoy! :)
##############################################
#  Settings
##############################################
background no
use_xft yes
xftfont Sans:size=9
xftalpha 1
update_interval 1.0
total_run_times 0
own_window yes
own_window_transparent yes
own_window_type override
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
double_buffer yes
minimum_size 50 50
maximum_width 240
draw_shades yes
draw_outline no
draw_borders no
draw_graph_borders no
default_color white
default_shade_color black
default_outline_color white
# custom colors #######################################################
color0 FFFFFF
color1 F5F5F5
color2 A2AEC6
color3 696969
color4 D3D3D3
color5 6495ED
color6 87CEFA
color7 5F9EA0
color8 BBBBBB
color9 262729

alignment bottom_right
gap_x 20
gap_y 45
no_buffers yes
uppercase no
cpu_avg_samples 2
override_utf8_locale yes
##############################################
#  Output
##############################################
TEXT




${voffset -50}$color4 ${font conkyWeather:size=36}${execi 3600 conkyForecast --location=USTX1312 --datatype=WF}${font :size=14}${offset 20}Temp: ${execi 3600 conkyForecast --location=USTX1312 --datatype=HT --imperial}${font}

$color2 ${font}Barometer Tendency: ${execi 600 conkyForecast --location=USTX1312 --datatype=BD}
$color2 Humidity: ${execi 600 conkyForecast --location=USTX1312 --datatype=HM}
$color2 ${font}Wind Speed: ${execi 600 conkyForecast --location=USTX1312 --hideunits --datatype=WS} km/h ${execi 600 conkyForecast --location=USTX1312 --hideunits --datatype=WD}
$color2 ${font}Wind Gusts: ${execi 600 conkyForecast --location=USTX1312 --datatype=WG}
$color2 Daylight: ${execi 600 conkyForecast --location=USTX1312 --datatype=SR} - ${execi 600 conkyForecast --location=USTX1312 --datatype=SS}
${alignc}$color8 / $color3 Forcast $color8 /
${color6}${execi 3600 conkyForecast --location=USTX1312 --datatype=DW --shortweekday --startday=1 --spaces=9 --endday=4}
${color1}${font ConkyWeather:size=24}${execi 3600 conkyForecast --location=USTX1312 --datatype=WF --startday=1 --endday=4 --spaces=3}   
${font}${color6}${execi 3600 conkyForecast -i --location=USTX1312 --datatype=HT --startday=1 --endday=4 --spaces=7}
${font}${color5}${execi 3600 conkyForecast -i --location=USTX1312 --datatype=LT --startday=1 --endday=4 --spaces=7}
${color1}${font}${execi 3600 conkyForecast --location=USTX1312 --datatype=PC --startday=1 --endday=4 --spaces=8}

.startconky.sh

Code: Select all

#!/bin/bash

sleep 25 &&    # 0 good for Xfce - use 20 to 30 for Gnome

conky -c ~/.conkyrc &

sleep 25 &&

conky -c ~/.conkyrc-mem &

sleep 25 &&

conky -c ~/.conkyrc-hd &

sleep 25 &&

conky -c ~/.conkyrc-net &

sleep 25 &&

conky -c ~/.conkyrc-weather &


exit

Actually, I just found where I got it:
http://crunchbanglinux.org/forums/post/52343/#p52343

Still, any thoughts on consolidation, or any other suggestions for improvement? Thanks in advance.

[mintmaniac2]

conky top:

Code: Select all

background yes
use_xft yes
xftfont HandelGotD:size=8
xftalpha 0.5
out_to_console no
out_to_stderr no
extra_newline no
update_interval 1.0
total_run_times 0
own_window yes
own_window_type override
own_window_transparent yes
double_buffer yes
maximum_width 1036
minimum_size 8,1024
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders yes
uppercase no
default_color ffffff
alignment top_middle
gap_x 5
gap_y 5
no_buffers yes
cpu_avg_samples 2
override_utf8_locale no
color white
TEXT
${color}CPU1:${cpu cpu1}% ${cpugraph cpu1 8,60 C34723 FB9845} | CPU2:${cpu cpu2}% ${cpugraph cpu2 8,60 C34723 FB9845} | SWAP: ${swapbar 8,60 C34723 FB9845} | Used Disk '/': ${color1}${fs_used /} ${color}${fs_bar 8,60 /} ${color}| Free Disk '/': ${color1}${fs_free /} ${color}${fs_bar_free 8,60 /}${color} | Available Disk '/': ${fs_size /}
${alignc}Distro Ranking: ${execi 3600 ~/Bin/ranking.py}

conky side:

Code: Select all

background yes
use_xft yes
xftfont HandelGotD:size=8
xftalpha 0.5
out_to_console no
out_to_stderr no
extra_newline no
update_interval 1.0
total_run_times 0
own_window yes
own_window_type override
own_window_transparent yes
double_buffer yes
minimum_size 170 5
maximum_width 245
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders yes
uppercase no
default_color ffffff
alignment top_right
gap_x 5
gap_y 5
no_buffers yes
cpu_avg_samples 2
override_utf8_locale no
default_color white
color1 white
color2 E86D27
color5 969696
color6 5D5D5D
TEXT
${voffset 2}${font Arial Black:style=Bold:size=12}${alignc}${color 7CDB32}Linux Mint 9 "Isadora"
${color}${font OpenLogos:size=16}t${font}  Kernel:  ${alignr}${sysname}${kernel}
${color}${font StyleBats:size=16}P${font}  Updates: ${alignr}${execi 300 ~/Bin/debupdates.sh}
${color}${font StyleBats:size=16}A${font}  CPU: ${cpu cpu0}% ${alignr}${cpubar cpu0 8,60 C34723}
${color}${font StyleBats:size=16}K${color}${font}   Temp: ${alignr}${hwmon temp 1}°C
${color}${font StyleBats:size=16}g${font}  RAM: $memperc% ${alignr}${membar 8,60 FB9845}
${color}${font StyleBats:size=16}j${font}  SWAP: $swapperc% ${alignr}${swapbar 8,60 C34723}
${color}${font StyleBats:size=16}h${font}  Processes: ${alignr}${processes}
${color}${font StyleBats:size=16}q${font}  Uptime: ${alignr}${uptime}
${color}${font StyleBats:size=16}q${font}  Time: ${alignr}${color1}${time %H:%M:%S} ${color1}${time %d/%m/%y}

${color1}PROCESSES ${color}${hr 2}

NAME${alignr} PID ${alignr}CPU% MEM%
${top name 1}${alignr} ${top pid 1}${top cpu 1} ${top mem 1}
${top name 2}${alignr} ${top pid 2}${top cpu 2} ${top mem 2}
${top name 3}${alignr} ${top pid 3}${top cpu 3} ${top mem 3}
${top name 4}${alignr} ${top pid 4}${top cpu 4} ${top mem 4}
${top name 5}${alignr} ${top pid 5}${top cpu 5} ${top mem 5}
${top name 6}${alignr} ${top pid 6}${top cpu 6} ${top mem 6}

${color white}NETWORK${hr 2}

${voffset 4}${font PizzaDude Bullets:size=14}O${font}  Up: ${upspeed eth1/s} ${color}${alignr}${upspeedgraph eth1 8,60 C34723 FB9845}
${voffset 4}${font PizzaDude Bullets:size=14}U${font}   Down: ${downspeed eth1/s} ${color}${alignr}${downspeedgraph eth1 8,60 C34723 FB9845}
${voffset 4}${font PizzaDude Bullets:size=14}N${font}${color}   Upload: ${alignr}${totalup eth1}
${voffset 4}${font PizzaDude Bullets:size=14}T${font}   Download: ${alignr}${totaldown eth1}
${voffset 4}${font PizzaDude Bullets:size=14}a${font}   Local Ip: ${alignr}${addr eth1}
${voffset 4}${font PizzaDude Bullets:size=14}a${font}   External Ip: ${alignr}${execi 60 curl http://riivo.eu/php/ip.php}

  ${color white}Outbound Connection ${alignr} Remote Service/Port
  ${tcp_portmon 32768 61000 rhost 0} ${alignr} ${tcp_portmon 32768 61000 rservice 0}
  ${tcp_portmon 32768 61000 rhost 1} ${alignr} ${tcp_portmon 32768 61000 rservice 1}
  ${tcp_portmon 32768 61000 rhost 2} ${alignr} ${tcp_portmon 32768 61000 rservice 2}
  ${tcp_portmon 32768 61000 rhost 3} ${alignr} ${tcp_portmon 32768 61000 rservice 3}
  ${tcp_portmon 32768 61000 rhost 4} ${alignr} ${tcp_portmon 32768 61000 rservice 4}

${color white}${alignc}${execi 120 fortune -s | fold -w40}





[vrkalak]

Conkyrc, scripts and How-to - HERE >> http://theconso.deviantart.com/art/Info-and-Big-Time-Conky-177632567?q=&qo=

Not mine ... found at the DeviantART Conky Artists Group > http://conky-artists-group.deviantart.com/