compartilhamento linux mint 1o com winxp sp3

Portuguese Forum

compartilhamento linux mint 1o com winxp sp3

Postby reginotec on Wed Jul 13, 2011 8:54 pm

possuo duas maquinas uma com o linux mint 10 e outra com o windows xp sp3 gostaria de compartilhar pelo menos uma pasta entre as duas maquinas pra que possa transferir musicas do xp para o linux e vice versa quero tb que as duas maquinas tenham acesso a internet possuo net virtua e vou usar um roteador planet xrt-401d paar tal tarefa sera que alguem pode me ajudar como faço isso? sei que tenho que baixar o samba mas não tenho ideia de como crio o compartilhamento
quem puder me ajudar fico grato :?:
reginotec
Level 1
Level 1
 
Posts: 1
Joined: Wed Jul 13, 2011 8:44 pm

Linux Mint is funded by ads and donations.
 

Re: compartilhamento linux mint 1o com winxp sp3

Postby cassio on Fri Aug 26, 2011 8:40 am

Sou iniciante em Linux, mas parece que você precisará instalar o SAMBA, que serve para um computador em Unix se comunicar com um computador Windos ou DOS, veja o tuto em http://www.vivaolinux.com.br/artigo/Mic ... a?pagina=1, na comunidade Mint você verá o instalador automático da interface gráfica em http://community.linuxmint.com/software ... nfig-samba
cassio
Level 1
Level 1
 
Posts: 4
Joined: Thu Aug 25, 2011 4:14 pm

Re: compartilhamento linux mint 1o com winxp sp3

Postby nanogennari on Wed Aug 31, 2011 11:43 am

Eu aqui em casa tenho que fazer compartilhamento também, no inicio eu apanhei muito pra configurar o compartilhamento com o samba...

Mas dai eu descobri um recurso muito útil que já vem instalado no mint (vc só precisa instalar o pacote do samba: $ sudo apt-get install samba), quando vc vai em propriedades de uma pasta no nautilus tem a aba compartilhar, mas isso normalmente não funciona pra um usuário comum, então a solução que eu encontrei (e que funciona perfeito comigo) e abrir o nautilus como root (ALT+F2 e executar "gksu nautilus") e criar os compartilhamentos como root, ai depois se vc quiser excluir um compartilhamento vc vai ter de acessar como root de novo.

E realmente bem mais fácil do que criar o smb.conf na mão, principalmente pra quem não tem experiencia com isso.
AMD Phenom II X4 995 3.2GHz
2x2GB DDR2 Corsair Dominator
500GB SATA II Samsung
1 TB Samsung STORY Station USB Drive
Linux Mint 13 (MATE + xMonad)
Windows 7 (To play MS FS2004)
nanogennari
Level 1
Level 1
 
Posts: 8
Joined: Wed Aug 24, 2011 10:52 pm
Location: Brasilia, Brazil

Re: compartilhamento linux mint 1o com winxp sp3

Postby Carlos Rocha on Sun May 12, 2013 8:37 am

Pegando carona.
Instalei o Mint Maya. Aparentemente o o SAMBA esta instalado mas não consigo localizar.
Quando entro no gerenciadoir de arquivos até vejo a maquina com Win7 mas não tenho permissão para acesso.
Em nenhum momento vejo o nome SAMBA
Creio que teria que ver o SAMBA para passar ter o problema mencionado pelo colega do XP
Carlos Rocha
Level 1
Level 1
 
Posts: 1
Joined: Sun May 12, 2013 8:15 am

Re: compartilhamento linux mint 1o com winxp sp3

Postby ruberval on Sat Aug 31, 2013 2:42 pm

Estou com problema semelhante, tem um pc com o Mint15 e um notebook com W7, no W7 ate enxergo as pastas compartilhadas pelo mint, mas nao consigo acesso a pasta, e no mint nao consigo de forma alguma acessar a rede windows, simplismente nao abre, segue abaixo o smb.conf.

Se alguem puder ajudar fico grato.


Code: Select all
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
# A well-established practice is to name the original file
# "smb.conf.master" and create the "real" config file with
# testparm -s smb.conf.master >smb.conf
# This minimizes the size of the really used smb.conf file
# which, according to the Samba Team, impacts performance
# However, use this with caution if your smb.conf file contains nested
# "include" statements. See Debian bug #483187 for a case
# where using a master file is not a good idea.
#

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = WORKGROUP

# server string is the equivalent of the NT Description field
   server string = %h server (Samba, LinuxMint)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
#   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
   dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
;   name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
   max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
   syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
#  security = user

# You may wish to use password encryption.  See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
   encrypt passwords = true

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using. 
;   passdb backend = tdbsam

   obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
   unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
   pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
   map to guest = bad user

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
#   domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe. 
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe. 
; add group script = /usr/sbin/addgroup --force-badname %g

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
#   load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
;   printing = bsd
;   printcap name = /etc/printcap

# CUPS printing.  See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
;   printing = cups
;   printcap name = cups

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192
#   socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
#   domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
;   winbind enum groups = yes
;   winbind enum users = yes

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
;   usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
   usershare allow guests = yes

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home director as \\server\username
;[homes]
;   comment = Home Directories
;   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
;   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server. Un-comment the following parameter
# to make sure that only "username" can connect to \\server\username
# The following parameter makes sure that only "username" can connect
#
# This might need tweaking when using external authentication schemes
;   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

   realm = localdomain
#   server role = standalone
[printers]
   comment = All Printers
   browseable = no
   path = /var/spool/samba
   printable = yes
;   guest ok = no
;   read only = yes
   create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers

[FILMES]
   path = /media/ruberval/DADOS/FILMES
   writeable = yes
;   browseable = yes
   guest ok = yes

[filmes novos]
   path = /media/ruberval/DADOS/filmes novos
   writeable = yes
;   browseable = yes
   guest ok = yes
ruberval
Level 1
Level 1
 
Posts: 1
Joined: Sat Aug 31, 2013 2:27 pm


Return to Portuguese

Who is online

Users browsing this forum: No registered users and 0 guests