I was using LM 11 (Katya) before and everything worked out-of-the-box.
Now I have installed LMDE with update pack 3 (64 bit version, XFCE) and my Asus Xonar DX sound card no longer works.
Other system specs: CPU 6-core Phenom II, 4 Gb memory
I have verified that the sound mixer is turned up and set to "Asus Xonar"
Tested program was Banshee player.
I have tried quite some things, including purging pulseaudio, but sound only works on
onboard sound card
Output from lspci:
Code: Select all
00:00.0 Host bridge: ATI Technologies Inc RX780/RX790 Chipset Host Bridge
00:02.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (external gfx0 port A)
00:09.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port E)
00:0a.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port F)
00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40)
00:12.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 41)
00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller (rev 40)
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40)
00:14.5 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:15.0 PCI bridge: ATI Technologies Inc SB700/SB800 PCI to PCI bridge (PCIE port 0)
00:15.1 PCI bridge: ATI Technologies Inc SB700/SB800 PCI to PCI bridge (PCIE port 1)
00:16.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:16.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
02:00.0 PCI bridge: PLX Technology, Inc. PEX8112 x1 Lane PCI Express-to-PCI Bridge (rev aa)
03:04.0 Multimedia audio controller: C-Media Electronics Inc CMI8788 [Oxygen HD Audio]
05:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03)
06:00.0 IDE interface: JMicron Technology Corp. JMB368 IDE controller
07:00.0 VGA compatible controller: nVidia Corporation GF104 [GeForce GTX 460] (rev a1)
07:00.1 Audio device: nVidia Corporation GF104 High Definition Audio Controller (rev a1)
Code: Select all
03:04.0 Multimedia audio controller [0401]: C-Media Electronics Inc CMI8788 [Oxygen HD Audio] [13f6:8788]
Subsystem: ASUSTeK Computer Inc. Virtuoso 100 (Xonar DX) [1043:8275]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at c800 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: AV200
Code: Select all
snd_hda_codec_hdmi 26321 4
snd_usb_audio 84855 3
snd_usbmidi_lib 23475 1 snd_usb_audio
snd_hda_codec_via 56995 1
snd_virtuoso 35006 4
snd_oxygen_lib 32825 1 snd_virtuoso
snd_hda_intel 26140 8
snd_hda_codec 72699 3 snd_hda_codec_hdmi,snd_hda_codec_via,snd_hda_intel
snd_hwdep 13186 2 snd_usb_audio,snd_hda_codec
snd_pcm_oss 41257 0
snd_mixer_oss 17969 3 snd_pcm_oss
snd_pcm 68104 6 snd_hda_codec_hdmi,snd_usb_audio,snd_oxygen_lib,snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_mpu401_uart 13507 1 snd_oxygen_lib
snd_seq_midi 12848 0
snd_seq_midi_event 13316 1 snd_seq_midi
snd_rawmidi 23297 3 snd_usbmidi_lib,snd_mpu401_uart,snd_seq_midi
snd_seq 45208 2 snd_seq_midi,snd_seq_midi_event
snd_timer 22581 2 snd_pcm,snd_seq
snd_seq_device 13137 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 52823 43 snd_hda_codec_hdmi,snd_usb_audio,snd_usbmidi_lib,snd_hda_codec_via,snd_virtuoso,snd_oxygen_lib,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_mpu401_uart,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 13152 3 snd
snd_page_alloc 13043 2 snd_hda_intel,snd_pcm
usbcore 124242 11 carl9170,uvcvideo,snd_usb_audio,snd_usbmidi_lib,usb_storage,usbhid,uas,xhci_hcd,ohci_hcd,ehci_hcd
Output from cat /proc/asound/cards
Code: Select all
0 [SB ]: HDA-Intel - HDA ATI SB
HDA ATI SB at 0xfbdf8000 irq 16
1 [DX ]: AV200 - Xonar DX
Asus Virtuoso 100 at 0xc800, irq 17
2 [U0x46d0x81b ]: USB-Audio - USB Device 0x46d:0x81b
USB Device 0x46d:0x81b at usb-0000:00:12.2-2.3, high speed
3 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xfe97c000 irq 19
But still no sound
I am pretty new to linux, how can I proceed from here?
Maybe a newer version of alsa or pulseaudio?
Thanks in advance!
Stormy667