Mint 12 - how verbose/no splash boot?
Forum rules
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Mint 12 - how verbose/no splash boot?
With previous versions of Mint I'd put a hash in one line of /etc/default/grub to get a verbose boot but this doesn't seem to do anything now. I like to see something happening at boot and it seems for a while an animated logo has been absent - a black screen has too often for many of us suggested problems so it seems inadequate. So how can I get the boot gibberish back?
If this isn't normal, this is happening on both a 2gb 3ghz AMD pc with very new Radeon card and a 3gb 1.6ghz Intel 965-based laptop, both 64 bit.
Thanks.
If this isn't normal, this is happening on both a 2gb 3ghz AMD pc with very new Radeon card and a 3gb 1.6ghz Intel 965-based laptop, both 64 bit.
Thanks.
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 1 time in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Re: Mint 12 - how verbose/no splash boot?
I want to know the answer to this too. SuSe has a cool thing where you can hit escape during the graphical bootloader and go to a verbose one, and I think that is the only thing Mint is missing!
Re: Mint 12 - how verbose/no splash boot?
[Edit] your original post and add [SOLVED] once your question is resolved.
“The people are my God” stressing the factor determining man’s destiny lies within man not in anything outside man, and thereby defining man as the dominator and remoulder of the world.
“The people are my God” stressing the factor determining man’s destiny lies within man not in anything outside man, and thereby defining man as the dominator and remoulder of the world.
Re: Mint 12 - how verbose/no splash boot?
This is my grub in /etc/default/grub. To fix it, I should change the ="quiet splash" to ="verbose" or ="verbose splash" ?
Code: Select all
[# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"]
Re: Mint 12 - how verbose/no splash boot?
@lutterworth: Should I back it up the default first? And just clearing it and leaving it blank will give me the verbose?
Re: Mint 12 - how verbose/no splash boot?
I've just tried this and it seems fine. Just removing quiet splash and leaving the quotes and then doing sudo update-grub in the terminal and rebooting. It's not quite the full Debian 6 display of gibberish that I like, as it is slightly intermittent with some black screen still, but it will do. It stops the impression being given that the computer has had a stroke.
Re: Mint 12 - how verbose/no splash boot?
@ tpprynn: "It stops the impression being given that the computer has had a stroke." haha ok. Thanks for the heads up. I had Suse which had a very verbose boot, but maybe this will be better than nothing, like you say!
Re: Mint 12 - how verbose/no splash boot?
Hi Folks,
this is my first post on this forum.
Just to confirm that setting:
GRUB_CMDLINE_LINUX_DEFAULT=""
(removing "quiet splash" between the quotes)
in /etc/default/grub , followed by update-grub did the trick.
A boot blank screen is a bit scary... As soccerz619 said, (open)SUSE had an excellent verbosing just pressing the ESC key during boot...
So far, so good: Mint ROCKS!
Cheers!
this is my first post on this forum.
Just to confirm that setting:
GRUB_CMDLINE_LINUX_DEFAULT=""
(removing "quiet splash" between the quotes)
in /etc/default/grub , followed by update-grub did the trick.
A boot blank screen is a bit scary... As soccerz619 said, (open)SUSE had an excellent verbosing just pressing the ESC key during boot...
So far, so good: Mint ROCKS!
Cheers!
Re: Mint 12 - how verbose/no splash boot?
[SOLVED] Linux Mint - How verbose boot / no splash boot
Just for sharing with everyone a PM i received regarding this issue:
Hi!!
Well, in Mint 11 i don't know, but works fine in Mint 13/MATE.
1. If you just change this line:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
into
GRUB_CMDLINE_LINUX_DEFAULT=""
in /etc/default/grub
the verbose starts at the fsck section.
2. Please try to uncomment, in the same file, this line:
#GRUB_TERMINAL=console
(to
GRUB_TERMINAL=console
)
3. and finally to sudo update-grub2
This should work fine. You'll be in 640X480 instead of 1024X768 or whatever, but it works fine here.
***
Maybe uncommenting this line:
#GRUB_GFXMODE=640x480 to GRUB_GFXMODE=1024X768 (and recommenting the "console" line)
but haven't tried yet...
***
Remember to sudo update-grub2 after
HTH
Kind regards,
pixpax
Just for sharing with everyone a PM i received regarding this issue:
Hi!!
Well, in Mint 11 i don't know, but works fine in Mint 13/MATE.
1. If you just change this line:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
into
GRUB_CMDLINE_LINUX_DEFAULT=""
in /etc/default/grub
the verbose starts at the fsck section.
2. Please try to uncomment, in the same file, this line:
#GRUB_TERMINAL=console
(to
GRUB_TERMINAL=console
)
3. and finally to sudo update-grub2
This should work fine. You'll be in 640X480 instead of 1024X768 or whatever, but it works fine here.
***
Maybe uncommenting this line:
#GRUB_GFXMODE=640x480 to GRUB_GFXMODE=1024X768 (and recommenting the "console" line)
but haven't tried yet...
***
Remember to sudo update-grub2 after
HTH
Kind regards,
pixpax
Re: Mint 12 - how verbose/no splash boot?
Nice! GRUB_TERMINAL=console gives lots-o-boot info. Problem is it flies by so fast, especially with an SSD.