Hey,
I'm running LMDE XFCE and trying to set up my HP LaserJet 1010 in CUPS. It's connected over the network via an Apple Airport Express, using Bonjour protocol.
In Ubuntu 11.10 i just set it up with CUPS and it worked fine.
In LMDE, i can find it in CUPS and add it, but it doesn't print (just stucks at a percentage level like 27% or 41%).
I've tried with different drivers - the "HP LaserJet 1010 - CUPS+Gutenprint v5.2.7" that worked in Ubuntu - printing stops at a certain percent. Also tried the HP LaserJet 1010 hpijs v3.11.5 - doesn't even start to process printing, job goes straight to "stopped".
Packages hplip and hpijs are installed.
I've tried installing hplip-3.11.7, 3.11.10 and 3.11.12 manually (plus the additional plugins) but no difference. Only the "hpijs 3.11.x" driver shows up in CUPS, not any "hplip 3.11.x", don't know if this matters.
In HP Device Manager, no printers show up when I select network printer.
In CUPS, I also tried adding a "local" HPLIPS printer with address socket://10.0.0.1 (my routers IP) and tried with several drivers, but same result.
What to do!?
CUPS finds printer at this address
dnssd://Hewlett-Packard%20hp%20LaserJet%201010._pdl-datastream._tcp.local/
[SOLVED] Problem with CUPS network printer, LMDE
Forum rules
LMDE 2 has reached end of support as of 1-1-2019
LMDE 2 has reached end of support as of 1-1-2019
-
Moga
[SOLVED] Problem with CUPS network printer, LMDE
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 4 times in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
-
Moga
Re: Problem with CUPS network printer, LMDE
managed to solve it!
in cups, add new printer, select AppSocket/HP Jet Direct, specify address:
socket://10.0.0.2:9100
(10.0.0.2 is the IP to the airport express router to which the printer is connected)
Select the HP LaserJet 1010 - CUPS+Gutenprint v5.2.7 driver. And everything works!
(I also added the hplip-ppds package, and removed the hplip 3.11.5 package since I have the 3.11.12 installed anyway. but I dont think any of this matters, it was probably just a matter of finding out the right port)
in cups, add new printer, select AppSocket/HP Jet Direct, specify address:
socket://10.0.0.2:9100
(10.0.0.2 is the IP to the airport express router to which the printer is connected)
Select the HP LaserJet 1010 - CUPS+Gutenprint v5.2.7 driver. And everything works!
(I also added the hplip-ppds package, and removed the hplip 3.11.5 package since I have the 3.11.12 installed anyway. but I dont think any of this matters, it was probably just a matter of finding out the right port)