[Solved] No Networks at boot up

[majestyx]

First: thanks for LM12 LXDE

But, i have a network problem whit LM12LXDE 32bit (RC and now also in the Final Version) If i boot my laptop whit plugged LAN wire -> the green and the orange LED lights permanently. No Network accessible if i plug my LAN wire after boot and login to LXDE my LAN (all networks) works fine?

the same issue is by Wireless! i can power of (Hardware switch) my wlan0
i must start LM12 whit switch of WLAN. After login to LXDE i switch on my wlan0 and all WLANs works ?! mayby this is only a problem whit my "networkdriver" ?!

Code: Select all

[   19.628226] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[   19.684123] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[   19.684357] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   20.159508] ADDRCONF(NETDEV_UP): wlan0: link is not ready

i have the LM12LXDE on some (IBM) Laptops - the problem above is on a X200. On a R40 and T40 i don't have any Problems (all have LM12 LXDE 32 bit)

My log files shows nothing interesting?!

thanks in advanced & nice "green" weekend @all!

[xenopeek]

On the X200 (the lappy with problems), please run the following command from the terminal for us to have some basic information. Post the output here

Code: Select all

inxi -SNxc 0

[majestyx]

Hello Vincent,

this is it:

Code: Select all

~ $ inxi -SNxc 0
System:    Host x200 Kernel 3.0.0-16-generic i686 (32 bit gcc 4.6.1)
           Desktop LXDE (Openbox 3.5.0) Distro Linux Mint 12 LXDE
Network:   Card-1 Intel Ultimate N WiFi Link 5300 driver iwlagn v: in-tree: bus-ID: 03:00.0


but, i have observed on boot..
i. I start the hardware...
ii. Network came up (the network looks ok, e.g. the green LED on eth0 flashes and the orange LED flashes also 1 or 2x (DHCP)
iii. And then came up the update manager. he steals ?! at first my DNS. sometimes i can ping on 8.8.8.8 but not "google.com" or any domain else. sometime the update manager crashes the complete network. No ping, not on any IP address or domain. and if i have plugged the wire (on boot, on the X200) the green and orange LED shine always
iiii. on wireless i make a hardware reset from wlan0 after startup from update manager, and my network works. update manager also ....

thx for help and a nice Sunday

[xenopeek]

This only shows you wifi card, not your ethernet card... Please share the output of:

Code: Select all

lspci

[majestyx]

Code: Select all

~ $ lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07)
00:03.3 Serial controller: Intel Corporation Mobile 4 Series Chipset AMT SOL Redirection (rev 07)
00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
00:1f.2 IDE interface: Intel Corporation ICH9M/M-E 2 port SATA IDE Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
03:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300

[xenopeek]

Ah Please share the details of both network cards:

Code: Select all

sudo lspci -v -s 00:19.0
sudo lspci -v -s 03:00.0

[majestyx]

sure, i love to share (not only) "know how"

Code: Select all

~ $ sudo lspci -v -s 00:19.0
[sudo] password for michael:
00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
   Subsystem: Lenovo Device 20ee
   Flags: bus master, fast devsel, latency 0, IRQ 43
   Memory at f2600000 (32-bit, non-prefetchable) [size=128K]
   Memory at f2625000 (32-bit, non-prefetchable) [size=4K]
   I/O ports at 1840 [size=32]
   Capabilities: [c8] Power Management version 2
   Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
   Capabilities: [e0] PCI Advanced Features
   Kernel driver in use: e1000e
   Kernel modules: e1000e


Code: Select all

~ $ sudo lspci -v -s 03:00.0
03:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300
   Subsystem: Intel Corporation Device 1011
   Physical Slot: 1
   Flags: bus master, fast devsel, latency 0, IRQ 46
   Memory at f2500000 (64-bit, non-prefetchable) [size=8K]
   Capabilities: [c8] Power Management version 3
   Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
   Capabilities: [e0] Express Endpoint, MSI 00
   Capabilities: [100] Advanced Error Reporting
   Capabilities: [140] Device Serial Number 00-21-6a-ff-ff-01-01-86
   Kernel driver in use: iwlagn
   Kernel modules: iwlagn


pls, note: the "network" problem came (IMHO) whit the update manager (on boot up) thanks in advanced

[xox101]

Has anybody got an answer to this as I am facing the same problem? Thinkpad x200 with an Intel Corp Ultimate N WiFi Link 5300 and no wireless on Mint 12. Worked fine with 11 although there were other problems so I went up to 12.

[majestyx]

hello xox

sorry, i hve no glue wats happent - i cange the distro on my x200. but, i have set up a x220 whit LM12 KDE - this works fine, include nm-manager. only TSL is missing (for me) to take on my VPN

anyone knows were i find TSL for nm-manager in LM12/KDE?!