Reading this bootchart ?

[scotthge]

I have LMDE with update pak 4 and have been experiencing so long boot time lately. So I installed bootchart so I could see what might be taking so long. Can anyone tell me what they think of the following chart? I am new to LMDE so I don't know what everything is on the chart so I thought someone could just tell me if things look normal.

bootchart.png (126.12 KiB) Viewed 657 times

Thanks for looking,
Scotty

[scotthge]

Oh I forgot to ask the most important question that I had about this chart. I have timed the computer to check the boot time and from the time that the grub window appears to the time that I have a usable desktop is about 1 minute 20 seconds, but the boot chart shows 30s of boot time. Why does it not show the full 80 seconds of boot time ?

Thanks for reading my post,
Scotty

[wayne128]

what does dmesg on terminal says?

[scotthge]

Hi wayne128, I went to terminal and typed in dmesg and this is what I get.

Screenshot.png (195.82 KiB) Viewed 630 times

[wayne128]

the output should have a long list .
You can copy and paste here, then put all of them into Code like example of my dmesg

Code: Select all

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-2-486 (Debian 3.2.9-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-1) ) #1 Mon Mar 5 00:55:40 UTC 2012
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000004fff0000 (usable)
[    0.000000]  BIOS-e820: 000000004fff0000 - 000000004fff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000004fff3000 - 0000000050000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] DMI 2.3 present.
[    0.000000] DMI: Compaq Presario 061 DK266A-AB4 S4150AP SE210/MS-6575, BIOS 3.02  05/05/2003
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x4fff0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CAFFF write-protect
[    0.000000]   CB000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 040000000 mask FF0000000 write-back
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [c00f60f0] f60f0
[    0.000000] initial memory mapped : 0 - 01800000
[    0.000000] Base memory trampoline at [c009c000] 9c000 size 12288
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 17fb000-1800000
[    0.000000] RAMDISK: 36eec000 - 3776e000
[    0.000000] ACPI: RSDP 000f7f80 00014 (v00 AWARD )
[    0.000000] ACPI: RSDT 4fff3000 0002C (v01 AWARD  AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: FACP 4fff3040 00074 (v01 AWARD  AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: DSDT 4fff30c0 03464 (v01 AWARD  AWRDACPI 00001000 MSFT 0100000E)
[    0.000000] ACPI: FACS 4fff0000 00040
[    0.000000] ACPI: APIC 4fff6540 00068 (v01 AWARD  AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 391MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0004fff0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0004fff0
[    0.000000] On node 0 totalpages: 327551
[    0.000000] free_area_init_node: node 0, pgdat c13bf438, node_mem_map f64ec200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 784 pages used for memmap
[    0.000000]   HighMem zone: 99554 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 50000000:aec00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 324991
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-486 root=UUID=2ea83ce8-70c1-4572-b7fa-9d8dcc0eaa02 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000377fe:0004fff0)
[    0.000000] Memory: 1285556k/1310656k available (2563k kernel code, 24648k reserved, 1303k data, 444k init, 401352k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfffa1000 - 0xfffff000   ( 376 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc13c7000 - 0xc1436000   ( 444 kB)
[    0.000000]       .data : 0xc1280eac - 0xc13c6cc0   (1303 kB)
[    0.000000]       .text : 0xc1000000 - 0xc1280eac   (2563 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=f6008000 soft=f600a000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2399.031 MHz processor.
[    0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4798.06 BogoMIPS (lpj=9596124)
[    0.004010] pid_max: default: 32768 minimum: 301
[    0.004059] Security Framework initialized
[    0.004071] AppArmor: AppArmor disabled by boot time parameter
[    0.004089] Mount-cache hash table entries: 512
[    0.004245] Initializing cgroup subsys cpuacct
[    0.004252] Initializing cgroup subsys memory
[    0.004264] Initializing cgroup subsys devices
[    0.004268] Initializing cgroup subsys freezer
[    0.004273] Initializing cgroup subsys net_cls
[    0.004278] Initializing cgroup subsys blkio
[    0.004288] Initializing cgroup subsys perf_event
[    0.004343] CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
[    0.005000] ACPI: Core revision 20110623
[    0.012082] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[    0.012097] ... version:                0
[    0.012100] ... bit width:              40
[    0.012102] ... generic registers:      18
[    0.012104] ... value mask:             000000ffffffffff
[    0.012107] ... max period:             0000007fffffffff
[    0.012109] ... fixed-purpose events:   0
[    0.012112] ... event mask:             000000000003ffff
[    0.012334] NMI watchdog enabled, takes one hw-pmu counter.
[    0.012366] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.012681] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.056003] devtmpfs: initialized
[    0.056003] PM: Registering ACPI NVS region at 4fff0000 (12288 bytes)
[    0.056003] print_constraints: dummy:
[    0.056003] NET: Registered protocol family 16
[    0.056003] EISA bus registered
[    0.056003] ACPI: bus type pci registered
[    0.092053] PCI: PCI BIOS revision 2.10 entry at 0xfbd90, last bus=1
[    0.092057] PCI: Using configuration type 1 for base access
[    0.092995] bio: create slab <bio-0> at 0
[    0.093097] ACPI: Added _OSI(Module Device)
[    0.093101] ACPI: Added _OSI(Processor Device)
[    0.093106] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.093111] ACPI: Added _OSI(Processor Aggregator Device)
[    0.093799] ACPI: EC: Look up EC in DSDT
[    0.097561] ACPI: Interpreter enabled
[    0.097578] ACPI: (supports S0 S1 S3 S4 S5)
[    0.097616] ACPI: Using IOAPIC for interrupt routing
[    0.102136] ACPI: No dock devices found.
[    0.102141] HEST: Table not found.
[    0.102149] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.102242] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.102433] pci_root PNP0A03:00: host bridge window [io  0x0000-0x047f] (ignored)
[    0.102439] pci_root PNP0A03:00: host bridge window [io  0x0490-0x0cf7] (ignored)
[    0.102444] pci_root PNP0A03:00: host bridge window [io  0x0d00-0x0fff] (ignored)
[    0.102450] pci_root PNP0A03:00: host bridge window [io  0x1100-0xffff] (ignored)
[    0.102455] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.102461] pci_root PNP0A03:00: host bridge window [mem 0x50000000-0xfebfffff] (ignored)
[    0.102486] pci 0000:00:00.0: [1039:0651] type 0 class 0x000600
[    0.102501] pci 0000:00:00.0: reg 10: [mem 0xd0000000-0xd7ffffff]
[    0.102603] pci 0000:00:01.0: [1039:0001] type 1 class 0x000604
[    0.102660] pci 0000:00:02.0: [1039:0008] type 0 class 0x000601
[    0.102748] pci 0000:00:02.0: Enabling SiS 96x SMBus
[    0.102781] pci 0000:00:02.1: [1039:0016] type 0 class 0x000c05
[    0.102841] pci 0000:00:02.1: reg 20: [io  0x10c0-0x10df]
[    0.102895] pci 0000:00:02.3: [1039:7007] type 0 class 0x000c00
[    0.102920] pci 0000:00:02.3: reg 10: [mem 0xeb016000-0xeb016fff]
[    0.102988] pci 0000:00:02.3: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.103026] pci 0000:00:02.3: supports D1 D2
[    0.103031] pci 0000:00:02.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.103039] pci 0000:00:02.3: PME# disabled
[    0.103066] pci 0000:00:02.5: [1039:5513] type 0 class 0x000101
[    0.103100] pci 0000:00:02.5: reg 10: [io  0x01f0-0x01f7]
[    0.103115] pci 0000:00:02.5: reg 14: [io  0x03f4-0x03f7]
[    0.103129] pci 0000:00:02.5: reg 18: [io  0x0170-0x0177]
[    0.103144] pci 0000:00:02.5: reg 1c: [io  0x0374-0x0377]
[    0.103159] pci 0000:00:02.5: reg 20: [io  0x4000-0x400f]
[    0.103217] pci 0000:00:02.5: PME# supported from D3cold
[    0.103224] pci 0000:00:02.5: PME# disabled
[    0.103250] pci 0000:00:02.7: [1039:7012] type 0 class 0x000401
[    0.103274] pci 0000:00:02.7: reg 10: [io  0xd000-0xd0ff]
[    0.103290] pci 0000:00:02.7: reg 14: [io  0xd400-0xd47f]
[    0.103378] pci 0000:00:02.7: supports D1 D2
[    0.103382] pci 0000:00:02.7: PME# supported from D3hot D3cold
[    0.103389] pci 0000:00:02.7: PME# disabled
[    0.103411] pci 0000:00:03.0: [1039:7001] type 0 class 0x000c03
[    0.103431] pci 0000:00:03.0: reg 10: [mem 0xeb010000-0xeb010fff]
[    0.103516] pci 0000:00:03.1: [1039:7001] type 0 class 0x000c03
[    0.103536] pci 0000:00:03.1: reg 10: [mem 0xeb011000-0xeb011fff]
[    0.103623] pci 0000:00:03.2: [1039:7001] type 0 class 0x000c03
[    0.103643] pci 0000:00:03.2: reg 10: [mem 0xeb012000-0xeb012fff]
[    0.103732] pci 0000:00:03.3: [1039:7002] type 0 class 0x000c03
[    0.103756] pci 0000:00:03.3: reg 10: [mem 0xeb013000-0xeb013fff]
[    0.103851] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[    0.103858] pci 0000:00:03.3: PME# disabled
[    0.103891] pci 0000:00:04.0: [1039:0900] type 0 class 0x000200
[    0.103915] pci 0000:00:04.0: reg 10: [io  0xd800-0xd8ff]
[    0.103931] pci 0000:00:04.0: reg 14: [mem 0xeb014000-0xeb014fff]
[    0.103987] pci 0000:00:04.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.104048] pci 0000:00:04.0: supports D1 D2
[    0.104052] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.104059] pci 0000:00:04.0: PME# disabled
[    0.104088] pci 0000:00:07.0: [10ec:8139] type 0 class 0x000200
[    0.104112] pci 0000:00:07.0: reg 10: [io  0xdc00-0xdcff]
[    0.104127] pci 0000:00:07.0: reg 14: [mem 0xeb015000-0xeb0150ff]
[    0.104184] pci 0000:00:07.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.104221] pci 0000:00:07.0: supports D1 D2
[    0.104225] pci 0000:00:07.0: PME# supported from D1 D2 D3hot
[    0.104232] pci 0000:00:07.0: PME# disabled
[    0.104258] pci 0000:00:08.0: [14f1:2f00] type 0 class 0x000780
[    0.104282] pci 0000:00:08.0: reg 10: [mem 0xeb000000-0xeb00ffff]
[    0.104297] pci 0000:00:08.0: reg 14: [io  0xe000-0xe007]
[    0.104382] pci 0000:00:08.0: PME# supported from D3hot D3cold
[    0.104389] pci 0000:00:08.0: PME# disabled
[    0.104465] pci 0000:01:00.0: [1002:5961] type 0 class 0x000300
[    0.104487] pci 0000:01:00.0: reg 10: [mem 0xd8000000-0xdfffffff pref]
[    0.104500] pci 0000:01:00.0: reg 14: [io  0xc000-0xc0ff]
[    0.104513] pci 0000:01:00.0: reg 18: [mem 0xe9000000-0xe900ffff]
[    0.104549] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.104589] pci 0000:01:00.0: supports D1 D2
[    0.104614] pci 0000:01:00.1: [1002:5941] type 0 class 0x000380
[    0.104634] pci 0000:01:00.1: reg 10: [mem 0xe0000000-0xe7ffffff pref]
[    0.104647] pci 0000:01:00.1: reg 14: [mem 0xe9010000-0xe901ffff]
[    0.104715] pci 0000:01:00.1: supports D1 D2
[    0.104767] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.104775] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.104783] pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xe9ffffff]
[    0.104790] pci 0000:00:01.0:   bridge window [mem 0xd8000000-0xe7ffffff pref]
[    0.104804] pci_bus 0000:00: on NUMA node 0
[    0.104810] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.105115]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[    0.121671] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.121753] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[    0.121837] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.121915] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.121994] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.122076] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.122160] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.122242] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.122411] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.122417] vgaarb: loaded
[    0.122419] vgaarb: bridge control possible 0000:01:00.0
[    0.122489] PCI: Using ACPI for IRQ routing
[    0.122494] PCI: pci_cache_line_size set to 64 bytes
[    0.122573] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[    0.122578] reserve RAM buffer: 000000004fff0000 - 000000004fffffff
[    0.124699] pnp: PnP ACPI init
[    0.124732] ACPI: bus type pnp registered
[    0.124991] pnp 00:00: [mem 0x000cc000-0x000cffff]
[    0.124996] pnp 00:00: [mem 0x000f0000-0x000f7fff]
[    0.125001] pnp 00:00: [mem 0x000f8000-0x000fbfff]
[    0.125006] pnp 00:00: [mem 0x000fc000-0x000fffff]
[    0.125010] pnp 00:00: [mem 0x4fff0000-0x4fffffff]
[    0.125015] pnp 00:00: [mem 0xffff0000-0xffffffff]
[    0.125020] pnp 00:00: [mem 0x00000000-0x0009ffff]
[    0.125025] pnp 00:00: [mem 0x00100000-0x4ffeffff]
[    0.125029] pnp 00:00: [mem 0xffee0000-0xffefffff]
[    0.125034] pnp 00:00: [mem 0xfffe0000-0xfffeffff]
[    0.125039] pnp 00:00: [mem 0xfec00000-0xfecfffff]
[    0.125044] pnp 00:00: [mem 0xfee00000-0xfeefffff]
[    0.125138] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[    0.125145] system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.125151] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.125156] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.125162] system 00:00: [mem 0x4fff0000-0x4fffffff] could not be reserved
[    0.125168] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
[    0.125174] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.125180] system 00:00: [mem 0x00100000-0x4ffeffff] could not be reserved
[    0.125186] system 00:00: [mem 0xffee0000-0xffefffff] has been reserved
[    0.125192] system 00:00: [mem 0xfffe0000-0xfffeffff] has been reserved
[    0.125198] system 00:00: [mem 0xfec00000-0xfecfffff] could not be reserved
[    0.125204] system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.125211] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.125289] pnp 00:01: [bus 00-ff]
[    0.125294] pnp 00:01: [io  0x0cf8-0x0cff]
[    0.125300] pnp 00:01: [io  0x0000-0x047f window]
[    0.125304] pnp 00:01: [io  0x0480-0x048f]
[    0.125309] pnp 00:01: [io  0x0490-0x0cf7 window]
[    0.125314] pnp 00:01: [io  0x0d00-0x0fff window]
[    0.125321] pnp 00:01: [io  0x1000-0x10bf]
[    0.125325] pnp 00:01: [io  0x10c0-0x10ff]
[    0.125330] pnp 00:01: [io  0x1100-0xffff window]
[    0.125335] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[    0.125340] pnp 00:01: [mem 0x50000000-0xfebfffff window]
[    0.125406] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.125697] pnp 00:02: [io  0x0010-0x001f]
[    0.125702] pnp 00:02: [io  0x0022-0x003f]
[    0.125706] pnp 00:02: [io  0x0044-0x005f]
[    0.125711] pnp 00:02: [io  0x0062-0x0063]
[    0.125715] pnp 00:02: [io  0x0065-0x006f]
[    0.125720] pnp 00:02: [io  0x0074-0x007f]
[    0.125724] pnp 00:02: [io  0x0091-0x0093]
[    0.125729] pnp 00:02: [io  0x00a2-0x00bf]
[    0.125733] pnp 00:02: [io  0x00e0-0x00ef]
[    0.125738] pnp 00:02: [io  0x04d0-0x04d1]
[    0.125743] pnp 00:02: [io  0x0294-0x0297]
[    0.125815] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.125821] system 00:02: [io  0x0294-0x0297] has been reserved
[    0.125827] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.125848] pnp 00:03: [dma 4]
[    0.125852] pnp 00:03: [io  0x0000-0x000f]
[    0.125857] pnp 00:03: [io  0x0080-0x0090]
[    0.125862] pnp 00:03: [io  0x0094-0x009f]
[    0.125866] pnp 00:03: [io  0x00c0-0x00df]
[    0.125913] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.125933] pnp 00:04: [io  0x0070-0x0073]
[    0.125952] pnp 00:04: [irq 8]
[    0.125997] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.126013] pnp 00:05: [io  0x0061]
[    0.126060] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.126077] pnp 00:06: [io  0x00f0-0x00ff]
[    0.126085] pnp 00:06: [irq 13]
[    0.126132] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.126289] pnp 00:07: [io  0x03f2-0x03f5]
[    0.126294] pnp 00:07: [io  0x03f7]
[    0.126302] pnp 00:07: [irq 6]
[    0.126306] pnp 00:07: [dma 2]
[    0.126375] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.126592] pnp 00:08: [io  0x03f8-0x03ff]
[    0.126600] pnp 00:08: [irq 4]
[    0.126690] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.127096] pnp 00:09: [io  0x0378-0x037f]
[    0.127101] pnp 00:09: [io  0x0778-0x077b]
[    0.127109] pnp 00:09: [irq 7]
[    0.127114] pnp 00:09: [dma 3]
[    0.127210] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.127271] pnp 00:0a: [io  0x0060]
[    0.127276] pnp 00:0a: [io  0x0064]
[    0.127284] pnp 00:0a: [irq 1]
[    0.127347] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.127380] pnp: PnP ACPI: found 11 devices
[    0.127383] ACPI: ACPI bus type pnp unregistered
[    0.127390] PnPBIOS: Disabled by ACPI PNP
[    0.164926] Switching to clocksource acpi_pm
[    0.164949] PCI: max bus depth: 1 pci_try_num: 2
[    0.164975] pci 0000:00:02.3: BAR 6: assigned [mem 0x50000000-0x5001ffff pref]
[    0.164983] pci 0000:00:04.0: BAR 6: assigned [mem 0x50020000-0x5003ffff pref]
[    0.164989] pci 0000:00:07.0: BAR 6: assigned [mem 0x50040000-0x5005ffff pref]
[    0.164998] pci 0000:01:00.0: BAR 6: assigned [mem 0xe8000000-0xe801ffff pref]
[    0.165003] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.165009] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.165019] pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xe9ffffff]
[    0.165026] pci 0000:00:01.0:   bridge window [mem 0xd8000000-0xe7ffffff pref]
[    0.165047] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.165052] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.165058] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.165063] pci_bus 0000:01: resource 1 [mem 0xe8000000-0xe9ffffff]
[    0.165068] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xe7ffffff pref]
[    0.165139] NET: Registered protocol family 2
[    0.165226] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.165610] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.166795] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[    0.167124] TCP: Hash tables configured (established 131072 bind 65536)
[    0.167128] TCP reno registered
[    0.167135] UDP hash table entries: 512 (order: 1, 8192 bytes)
[    0.167151] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[    0.167321] NET: Registered protocol family 1
[    0.167403] pci 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.240027] pci 0000:00:03.0: PCI INT A disabled
[    0.240045] pci 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.324023] pci 0000:00:03.1: PCI INT B disabled
[    0.324040] pci 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    0.408024] pci 0000:00:03.2: PCI INT C disabled
[    0.408042] pci 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    0.408061] pci 0000:00:03.3: PCI INT D disabled
[    0.408080] pci 0000:01:00.0: Boot video device
[    0.408088] PCI: CLS 32 bytes, default 64
[    0.408184] Unpacking initramfs...
[    4.026205] Freeing initrd memory: 8712k freed
[    4.038803] audit: initializing netlink socket (disabled)
[    4.038825] type=2000 audit(1334674307.035:1): initialized
[    4.059811] highmem bounce pool size: 64 pages
[    4.059821] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    4.059959] VFS: Disk quotas dquot_6.5.2
[    4.059987] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    4.060099] msgmni has been set to 1743
[    4.060317] alg: No test for stdrng (krng)
[    4.060364] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    4.060370] io scheduler noop registered
[    4.060374] io scheduler deadline registered
[    4.060385] io scheduler cfq registered (default)
[    4.060751] ERST: Table is not found!
[    4.060755] GHES: HEST is not enabled!
[    4.060778] isapnp: Scanning for PnP cards...
[    4.414438] isapnp: No Plug & Play device found
[    4.414540] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    4.434932] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    4.455711] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    4.455987] Linux agpgart interface v0.103
[    4.456149] agpgart-sis 0000:00:00.0: SiS chipset [1039/0651]
[    4.463503] agpgart-sis 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
[    4.463691] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    4.463695] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    4.463889] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.464075] mousedev: PS/2 mouse device common for all mice
[    4.464147] rtc_cmos 00:04: RTC can wake from S4
[    4.464288] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    4.464314] rtc0: alarms up to one year, 242 bytes nvram
[    4.464387] EISA: Probing bus 0 at eisa.0
[    4.464399] Cannot allocate resource for EISA slot 1
[    4.464409] Cannot allocate resource for EISA slot 4
[    4.464427] EISA: Detected 0 cards.
[    4.464432] cpuidle: using governor ladder
[    4.464436] cpuidle: using governor menu
[    4.464733] TCP cubic registered
[    4.464764] NET: Registered protocol family 10
[    4.465423] Mobile IPv6
[    4.465428] NET: Registered protocol family 17
[    4.465434] Registering the dns_resolver key type
[    4.465457] Using IPI Shortcut mode
[    4.465616] PM: Hibernation image not present or could not be loaded.
[    4.465633] registered taskstats version 1
[    4.465985] rtc_cmos 00:04: setting system clock to 2012-04-17 14:51:47 UTC (1334674307)
[    4.466033] Initializing network drop monitor service
[    4.466185] Freeing unused kernel memory: 444k freed
[    4.466769] Write protecting the kernel text: 2564k
[    4.466792] Write protecting the kernel read-only data: 1044k
[    4.482067] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    4.556380] udevd[45]: starting version 175
[    4.651208] sis900.c: v1.08.10 Apr. 2 2006
[    4.651270] sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    4.665555] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    4.692963] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
[    4.704870] 0000:00:04.0: Using transceiver found at address 1 as default
[    4.710629] Floppy drive(s): fd0 is 1.44M
[    4.722952] SCSI subsystem initialized
[    4.731440] usbcore: registered new interface driver usbfs
[    4.731484] usbcore: registered new interface driver hub
[    4.743598] usbcore: registered new device driver usb
[    4.744550] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.763087] FDC 0 is a post-1991 82077
[    4.777589] libata version 3.00 loaded.
[    4.794940] eth0: SiS 900 PCI Fast Ethernet at 0xd800, IRQ 19, 00:0c:76:17:0c:16
[    4.794970] 8139cp 0000:00:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    4.795821] 8139too: 8139too Fast Ethernet driver 0.9.28
[    4.795888] 8139too 0000:00:07.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    4.796993] 8139too 0000:00:07.0: eth1: RealTek RTL8139 at 0xdc00, 94:0c:6d:86:ff:a4, IRQ 18
[    4.797612] firewire_ohci 0000:00:02.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    4.852102] firewire_ohci: Added fw-ohci device 0000:00:02.3, OHCI v1.0, 4 IR + 6 IT contexts, quirks 0x0
[    4.852339] ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    4.852369] ehci_hcd 0000:00:03.3: EHCI Host Controller
[    4.852401] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
[    4.852458] ehci_hcd 0000:00:03.3: irq 23, io mem 0xeb013000
[    4.864041] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00
[    4.864102] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    4.864107] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.864112] usb usb1: Product: EHCI Host Controller
[    4.864116] usb usb1: Manufacturer: Linux 3.2.0-2-486 ehci_hcd
[    4.864120] usb usb1: SerialNumber: 0000:00:03.3
[    4.864324] hub 1-0:1.0: USB hub found
[    4.864332] hub 1-0:1.0: 6 ports detected
[    4.865206] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.865252] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    4.865283] ohci_hcd 0000:00:03.0: OHCI Host Controller
[    4.865311] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[    4.865346] ohci_hcd 0000:00:03.0: irq 20, io mem 0xeb010000
[    4.922061] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    4.922068] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.922073] usb usb2: Product: OHCI Host Controller
[    4.922077] usb usb2: Manufacturer: Linux 3.2.0-2-486 ohci_hcd
[    4.922081] usb usb2: SerialNumber: 0000:00:03.0
[    4.922436] hub 2-0:1.0: USB hub found
[    4.922447] hub 2-0:1.0: 2 ports detected
[    4.922556] pata_sis 0000:00:02.5: version 0.5.2
[    4.922594] pata_sis 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    4.922632] pata_sis 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller
[    4.923440] scsi0 : pata_sis
[    4.923666] scsi1 : pata_sis
[    4.924630] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4000 irq 14
[    4.924636] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4008 irq 15
[    4.924924] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    4.924958] ohci_hcd 0000:00:03.1: OHCI Host Controller
[    4.924977] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[    4.925015] ohci_hcd 0000:00:03.1: irq 21, io mem 0xeb011000
[    4.982039] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    4.982046] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.982050] usb usb3: Product: OHCI Host Controller
[    4.982055] usb usb3: Manufacturer: Linux 3.2.0-2-486 ohci_hcd
[    4.982059] usb usb3: SerialNumber: 0000:00:03.1
[    4.982426] hub 3-0:1.0: USB hub found
[    4.982437] hub 3-0:1.0: 2 ports detected
[    4.982556] ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    4.982586] ohci_hcd 0000:00:03.2: OHCI Host Controller
[    4.982601] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
[    4.982635] ohci_hcd 0000:00:03.2: irq 22, io mem 0xeb012000
[    5.038121] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    5.038126] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.038131] usb usb4: Product: OHCI Host Controller
[    5.038135] usb usb4: Manufacturer: Linux 3.2.0-2-486 ohci_hcd
[    5.038139] usb usb4: SerialNumber: 0000:00:03.2
[    5.038473] hub 4-0:1.0: USB hub found
[    5.038483] hub 4-0:1.0: 2 ports detected
[    5.052042] Refined TSC clocksource calibration: 2399.560 MHz.
[    5.052051] Switching to clocksource tsc
[    5.096386] ata1.00: ATA-6: SAMSUNG SV4002H, QP100-07, max UDMA/100
[    5.096392] ata1.00: 78242976 sectors, multi 16: LBA
[    5.096523] ata1.01: ATA-7: ST3250823A, 3.03, max UDMA/100
[    5.096528] ata1.01: 488397168 sectors, multi 16: LBA48
[    5.112360] ata1.00: configured for UDMA/100
[    5.128354] ata1.01: configured for UDMA/100
[    5.128511] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG SV4002H  QP10 PQ: 0 ANSI: 5
[    5.129057] scsi 0:0:1:0: Direct-Access     ATA      ST3250823A       3.03 PQ: 0 ANSI: 5
[    5.300300] ata2.01: ATAPI: CW088D ATAPI CD-R/RW, V15HF, max UDMA/33
[    5.316282] ata2.01: configured for UDMA/33
[    5.317120] scsi 1:0:1:0: CD-ROM            CyberDrv CW088D CD-R/RW   15HF PQ: 0 ANSI: 5
[    5.334702] sd 0:0:0:0: [sda] 78242976 512-byte logical blocks: (40.0 GB/37.3 GiB)
[    5.334783] sd 0:0:0:0: [sda] Write Protect is off
[    5.334789] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.334823] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.337162] sr0: scsi3-mmc drive: 4x/48x writer cd/rw xa/form2 cdda tray
[    5.337169] cdrom: Uniform CD-ROM driver Revision: 3.20
[    5.337804] sr 1:0:1:0: Attached scsi CD-ROM sr0
[    5.344021] sd 0:0:1:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    5.344102] sd 0:0:1:0: [sdb] Write Protect is off
[    5.344107] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    5.344146] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.344289]  sda: sda1 sda2 sda3 sda4
[    5.356032] usb 3-1: new low-speed USB device number 2 using ohci_hcd
[    5.399119] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.438161]  sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 >
[    5.439392] sd 0:0:1:0: [sdb] Attached SCSI disk
[    5.568071] usb 3-1: New USB device found, idVendor=413c, idProduct=3012
[    5.568078] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.568083] usb 3-1: Product: Dell USB Optical Mouse
[    5.568087] usb 3-1: Manufacturer: Dell
[    5.587596] input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:03.1/usb3/3-1/3-1:1.0/input/input1
[    5.587856] generic-usb 0003:413C:3012.0001: input,hidraw0: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:03.1-1/input0
[    5.588247] usbcore: registered new interface driver usbhid
[    5.588252] usbhid: USB HID core driver
[    7.170024] Btrfs loaded
[    7.419382] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    9.424424] udevd[280]: starting version 175
[    9.978810] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    9.978822] ACPI: Power Button [PWRB]
[    9.978941] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    9.978947] ACPI: Power Button [PWRF]
[   10.068238] parport_pc 00:09: reported by Plug and Play ACPI
[   10.068357] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[   10.177427] udevd[314]: renamed network interface eth0 to eth2
[   10.374071] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   10.581528] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   10.588847] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   10.688853] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x10c0
[   10.756335] [drm] Initialized drm 1.1.0 20060810
[   11.375672] [drm] radeon kernel modesetting enabled.
[   11.375794] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   11.376459] [drm] initializing kernel modesetting (RV280 0x1002:0x5961 0x1002:0x2002).
[   11.376501] [drm] register mmio base: 0xE9000000
[   11.376504] [drm] register mmio size: 65536
[   11.376854] agpgart-sis 0000:00:00.0: AGP 2.0 bridge
[   11.376877] agpgart-sis 0000:00:00.0: putting AGP V2 device into 4x mode
[   11.376944] radeon 0000:01:00.0: putting AGP V2 device into 4x mode
[   11.376957] radeon 0000:01:00.0: GTT: 128M 0xD0000000 - 0xD7FFFFFF
[   11.376962] [drm] Generation 2 PCI interface, using max accessible memory
[   11.376969] radeon 0000:01:00.0: VRAM: 128M 0x00000000D8000000 - 0x00000000DFFFFFFF (128M used)
[   11.376981] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   11.376984] [drm] Driver supports precise vblank timestamp query.
[   11.377007] [drm] radeon: irq initialized.
[   11.377169] [drm] Detected VRAM RAM=128M, BAR=128M
[   11.377174] [drm] RAM width 64bits DDR
[   11.377270] [TTM] Zone  kernel: Available graphics memory: 446680 kiB.
[   11.377274] [TTM] Zone highmem: Available graphics memory: 647356 kiB.
[   11.377278] [TTM] Initializing pool allocator.
[   11.377316] [drm] radeon: 128M of VRAM memory ready
[   11.377321] [drm] radeon: 128M of GTT memory ready.
[   11.378635] radeon 0000:01:00.0: WB disabled
[   11.379455] [drm] Loading R200 Microcode
[   11.525194] [drm] radeon: ring at 0x00000000D0001000
[   11.525216] [drm] ring test succeeded in 1 usecs
[   11.525642] [drm] radeon: ib pool ready.
[   11.525742] [drm] ib test succeeded in 0 usecs
[   11.526028] [drm] No TV DAC info found in BIOS
[   11.526082] [drm] Radeon Display Connectors
[   11.526085] [drm] Connector 0:
[   11.526088] [drm]   VGA
[   11.526092] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[   11.526095] [drm]   Encoders:
[   11.526098] [drm]     CRT1: INTERNAL_DAC1
[   11.526101] [drm] Connector 1:
[   11.526103] [drm]   S-video
[   11.526106] [drm]   Encoders:
[   11.526109] [drm]     TV1: INTERNAL_DAC2
[   11.622166] [drm] fb mappable at 0xD8040000
[   11.622171] [drm] vram apper at 0xD8000000
[   11.622174] [drm] size 5242880
[   11.622177] [drm] fb depth is 24
[   11.622179] [drm]    pitch is 5120
[   11.622346] fbcon: radeondrmfb (fb0) is primary device
[   11.699266] Console: switching to colour frame buffer device 160x64
[   11.723155] fb0: radeondrmfb frame buffer device
[   11.723158] drm: registered panic notifier
[   11.723902] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
[   11.777165] snd_intel8x0 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   12.100029] intel8x0_measure_ac97_clock: measured 52905 usecs (2545 samples)
[   12.100034] intel8x0: clocking to 48000
[   14.348328] EXT4-fs (sda3): re-mounted. Opts: (null)
[   14.520099] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[   14.703581] device-mapper: uevent: version 1.0.3
[   14.704406] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[   14.845711] loop: module loaded
[   16.371727] fuse init (API version 7.17)
[   21.443951] 8139too 0000:00:07.0: eth1: link down
[   21.444285] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   22.993192] eth2: Media Link On 100mbps full-duplex
[   24.135027] Bluetooth: Core ver 2.16
[   24.135093] NET: Registered protocol family 31
[   24.135097] Bluetooth: HCI device and connection manager initialized
[   24.135102] Bluetooth: HCI socket layer initialized
[   24.135107] Bluetooth: L2CAP socket layer initialized
[   24.135645] Bluetooth: SCO socket layer initialized
[   24.395409] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   24.395415] Bluetooth: BNEP filters: protocol multicast
[   25.640223] lp0: using parport0 (interrupt-driven).
[   26.185696] ppdev: user-space parallel port driver
[   31.264024] eth2: no IPv6 routers present

[scotthge]

It won't let me copy the output of the terminal. The option is greyed out, even if I try as root.

[wayne128]

It won't let me copy the output of the terminal. The option is greyed out, even if I try as root.

hmm. try this:

move your mouse to inside terminal, left click and hold while dragging the mouse pointer to cover all text, then right click, copy,

now move to the forum's windows and paste.

[scotthge]

Well that worked and this is what I got. There is some other lines before these but they disappear and I can not copy them. So really there is no difference between a screenshot or the copy and paste data.


[ 0.246969] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.246992] pnp 00:0a: [irq 12]
[ 0.247052] pnp 00:0a: Plug and Play ACPI device, IDs AUI1500 SYN0300 SYN0002 PNP0f13 (active)
[ 0.247304] pnp 00:0b: [io 0x1000-0x107f]
[ 0.247307] pnp 00:0b: [io 0x1080-0x10ff]
[ 0.247311] pnp 00:0b: [io 0x1400-0x147f]
[ 0.247314] pnp 00:0b: [io 0x1480-0x14ff]
[ 0.247317] pnp 00:0b: [io 0x1800-0x187f]
[ 0.247322] pnp 00:0b: [io 0x1880-0x18ff]
[ 0.247421] system 00:0b: [io 0x1000-0x107f] has been reserved
[ 0.247425] system 00:0b: [io 0x1080-0x10ff] has been reserved
[ 0.247429] system 00:0b: [io 0x1400-0x147f] has been reserved
[ 0.247434] system 00:0b: [io 0x1480-0x14ff] has been reserved
[ 0.247438] system 00:0b: [io 0x1800-0x187f] has been reserved
[ 0.247441] system 00:0b: [io 0x1880-0x18ff] has been reserved
[ 0.247446] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.247808] pnp: PnP ACPI: found 12 devices
[ 0.247810] ACPI: ACPI bus type pnp unregistered
[ 0.256373] PCI: max bus depth: 1 pci_try_num: 2
[ 0.256412] pci 0000:00:12.0: BAR 6: assigned [mem 0xf1000000-0xf101ffff pref]
[ 0.256418] pci 0000:01:09.0: BAR 0: assigned [mem 0xfc100000-0xfc1007ff]
[ 0.256425] pci 0000:01:09.0: BAR 0: set to [mem 0xfc100000-0xfc1007ff] (PCI address [0xfc100000-0xfc1007ff])
[ 0.256429] pci 0000:00:08.0: PCI bridge to [bus 01-06]
[ 0.256434] pci 0000:00:08.0: bridge window [mem 0xfc100000-0xfc1fffff]
[ 0.256441] pci 0000:00:0c.0: PCI bridge to [bus 0e-13]
[ 0.256445] pci 0000:00:0c.0: bridge window [io 0x4000-0x4fff]
[ 0.256449] pci 0000:00:0c.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.256455] pci 0000:00:0d.0: PCI bridge to [bus 08-0d]
[ 0.256459] pci 0000:00:0d.0: bridge window [mem 0xfc000000-0xfc0fffff]
[ 0.256472] pci 0000:00:08.0: setting latency timer to 64
[ 0.256478] pci 0000:00:0c.0: setting latency timer to 64
[ 0.256484] pci 0000:00:0d.0: setting latency timer to 64
[ 0.256489] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.256492] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.256495] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.256499] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.256502] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.256506] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.256509] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff]
[ 0.256512] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff]
[ 0.256516] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff]
[ 0.256519] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff]
[ 0.256522] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff]
[ 0.256526] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff]
[ 0.256529] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff]
[ 0.256532] pci_bus 0000:00: resource 17 [mem 0x000f0000-0x000fffff]
[ 0.256536] pci_bus 0000:00: resource 18 [mem 0xd0000000-0xfebfffff]
[ 0.256540] pci_bus 0000:01: resource 1 [mem 0xfc100000-0xfc1fffff]
[ 0.256543] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.256547] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.256550] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.256553] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.256556] pci_bus 0000:01: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.256560] pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.256563] pci_bus 0000:01: resource 10 [mem 0x000d4000-0x000d7fff]
[ 0.256567] pci_bus 0000:01: resource 11 [mem 0x000d8000-0x000dbfff]
[ 0.256570] pci_bus 0000:01: resource 12 [mem 0x000dc000-0x000dffff]
[ 0.256573] pci_bus 0000:01: resource 13 [mem 0x000e0000-0x000e3fff]
[ 0.256577] pci_bus 0000:01: resource 14 [mem 0x000e4000-0x000e7fff]
[ 0.256580] pci_bus 0000:01: resource 15 [mem 0x000e8000-0x000ebfff]
[ 0.256583] pci_bus 0000:01: resource 16 [mem 0x000ec000-0x000effff]
[ 0.256587] pci_bus 0000:01: resource 17 [mem 0x000f0000-0x000fffff]
[ 0.256590] pci_bus 0000:01: resource 18 [mem 0xd0000000-0xfebfffff]
[ 0.256594] pci_bus 0000:0e: resource 0 [io 0x4000-0x4fff]
[ 0.256597] pci_bus 0000:0e: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.256601] pci_bus 0000:08: resource 1 [mem 0xfc000000-0xfc0fffff]
[ 0.256700] NET: Registered protocol family 2
[ 0.256938] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.258998] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.263729] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.264335] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.264339] TCP reno registered
[ 0.264359] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.264413] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.264590] NET: Registered protocol family 1
[ 0.264919] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 17
[ 0.264940] pci 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 17 (level, low) -> IRQ 17
[ 0.320047] pci 0000:00:02.0: PCI INT A disabled
[ 0.320265] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 17
[ 0.320270] pci 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 17 (level, low) -> IRQ 17
[ 0.320294] pci 0000:00:02.1: PCI INT B disabled
[ 0.320504] ACPI: PCI Interrupt Link [Z012] enabled at IRQ 16
[ 0.320518] pci 0000:00:04.0: PCI INT A -> Link[Z012] -> GSI 16 (level, low) -> IRQ 16
[ 0.376035] pci 0000:00:04.0: PCI INT A disabled
[ 0.376250] ACPI: PCI Interrupt Link [Z013] enabled at IRQ 16
[ 0.376255] pci 0000:00:04.1: PCI INT B -> Link[Z013] -> GSI 16 (level, low) -> IRQ 16
[ 0.376276] pci 0000:00:04.1: PCI INT B disabled
[ 0.376334] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.376388] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.376446] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.376511] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.376579] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.376652] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.376660] pci 0000:00:12.0: Boot video device
[ 0.376688] PCI: CLS 64 bytes, default 64
[ 0.376766] Unpacking initramfs...
[ 3.007952] Freeing initrd memory: 8832k freed
[ 3.015107] PCI-DMA: Disabling AGP.
[ 3.015217] PCI-DMA: aperture base @ c0000000 size 65536 KB
[ 3.015219] PCI-DMA: using GART IOMMU.
[ 3.015224] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 3.019779] Simple Boot Flag at 0x36 set to 0x1
[ 3.020419] audit: initializing netlink socket (disabled)
[ 3.020436] type=2000 audit(1334661523.020:1): initialized
[ 3.057093] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.095240] VFS: Disk quotas dquot_6.5.2
[ 3.095288] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.095390] msgmni has been set to 7800
[ 3.095633] alg: No test for stdrng (krng)
[ 3.095682] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 3.095686] io scheduler noop registered
[ 3.095689] io scheduler deadline registered
[ 3.095712] io scheduler cfq registered (default)
[ 3.095893] pcieport 0000:00:0c.0: setting latency timer to 64
[ 3.095925] pcieport 0000:00:0c.0: irq 40 for MSI/MSI-X
[ 3.096067] pcieport 0000:00:0d.0: setting latency timer to 64
[ 3.096093] pcieport 0000:00:0d.0: irq 41 for MSI/MSI-X
[ 3.096290] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 3.096293] vesafb: scrolling: redraw
[ 3.096296] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 3.096727] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90002b00000, using 3072k, total 3072k
[ 3.113753] Console: switching to colour frame buffer device 128x48
[ 3.130600] fb0: VESA VGA frame buffer device
[ 3.130672] ERST: Table is not found!
[ 3.130674] GHES: HEST is not enabled!
[ 3.130782] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.164644] Linux agpgart interface v0.103
[ 3.164811] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.177854] i8042: Detected active multiplexing controller, rev 1.1
[ 3.186311] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.186322] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 3.186371] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 3.186408] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 3.186447] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 3.186660] mousedev: PS/2 mouse device common for all mice
[ 3.187403] rtc_cmos 00:07: RTC can wake from S4
[ 3.187575] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 3.187618] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 3.187634] cpuidle: using governor ladder
[ 3.187637] cpuidle: using governor menu
[ 3.187913] TCP cubic registered
[ 3.187982] NET: Registered protocol family 10
[ 3.188640] Mobile IPv6
[ 3.188644] NET: Registered protocol family 17
[ 3.188650] Registering the dns_resolver key type
[ 3.188893] PM: Hibernation image not present or could not be loaded.
[ 3.188911] registered taskstats version 1
[ 3.208236] rtc_cmos 00:07: setting system clock to 2012-04-17 11:18:43 UTC (1334661523)
[ 3.208305] Initializing network drop monitor service
[ 3.209854] Freeing unused kernel memory: 568k freed
[ 3.210216] Write protecting the kernel read-only data: 6144k
[ 3.214142] Freeing unused kernel memory: 708k freed
[ 3.218272] Freeing unused kernel memory: 684k freed
[ 3.227060] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 3.338908] udevd[80]: starting version 175
[ 3.394591] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 3.394840] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
[ 3.394862] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
[ 3.394868] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 3.402755] usbcore: registered new interface driver usbfs
[ 3.402792] usbcore: registered new interface driver hub
[ 3.415097] usbcore: registered new device driver usb
[ 3.415812] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.490767] SCSI subsystem initialized
[ 3.513018] libata version 3.00 loaded.
[ 3.527758] sdhci: Secure Digital Host Controller Interface driver
[ 3.527762] sdhci: Copyright(c) Pierre Ossman
[ 3.557325] firewire_ohci 0000:01:09.0: enabling device (0100 -> 0102)
[ 3.557552] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
[ 3.557571] firewire_ohci 0000:01:09.0: PCI INT A -> Link[LNK1] -> GSI 11 (level, low) -> IRQ 11
[ 3.612092] firewire_ohci: Added fw-ohci device 0000:01:09.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x11
[ 3.612345] sdhci-pci 0000:01:09.1: SDHCI controller found [1180:0822] (rev 22)
[ 3.612806] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 10
[ 3.612826] sdhci-pci 0000:01:09.1: PCI INT B -> Link[LNK2] -> GSI 10 (level, low) -> IRQ 10
[ 3.612888] sdhci-pci 0000:01:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 3.612915] mmc0: no vmmc regulator found
[ 3.612974] Registered led device: mmc0::
[ 3.614023] mmc0: SDHCI controller on PCI [0000:01:09.1] using DMA
[ 3.637988] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.637993] ACPI: Thermal Zone [TZS0] (35 C)
[ 3.643127] thermal LNXTHERM:01: registered as thermal_zone1
[ 3.643131] ACPI: Thermal Zone [TZS1] (38 C)
[ 3.916861] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1d:72:6e:59:55
[ 3.916867] forcedeth 0000:00:0a.0: highdma pwrctl mgmt lnktim msi desc-v3
[ 3.917266] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 17 (level, low) -> IRQ 17
[ 3.917312] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 3.917316] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 3.917501] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 3.917535] ehci_hcd 0000:00:02.1: debug port 1
[ 3.917544] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 3.917573] ehci_hcd 0000:00:02.1: irq 17, io mem 0xfc489000
[ 3.928039] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 3.928076] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.928080] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.928083] usb usb1: Product: EHCI Host Controller
[ 3.928086] usb usb1: Manufacturer: Linux 3.2.0-2-amd64 ehci_hcd
[ 3.928089] usb usb1: SerialNumber: 0000:00:02.1
[ 3.928277] hub 1-0:1.0: USB hub found
[ 3.928283] hub 1-0:1.0: 5 ports detected
[ 3.928492] ehci_hcd 0000:00:04.1: PCI INT B -> Link[Z013] -> GSI 16 (level, low) -> IRQ 16
[ 3.928525] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 3.928529] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 3.928542] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
[ 3.928572] ehci_hcd 0000:00:04.1: debug port 1
[ 3.928581] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[ 3.928609] ehci_hcd 0000:00:04.1: irq 16, io mem 0xfc489400
[ 3.940038] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 3.940066] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.940069] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.940072] usb usb2: Product: EHCI Host Controller
[ 3.940075] usb usb2: Manufacturer: Linux 3.2.0-2-amd64 ehci_hcd
[ 3.940078] usb usb2: SerialNumber: 0000:00:04.1
[ 3.940236] hub 2-0:1.0: USB hub found
[ 3.940241] hub 2-0:1.0: 5 ports detected
[ 3.940419] pata_amd 0000:00:06.0: version 0.4.1
[ 3.940477] pata_amd 0000:00:06.0: setting latency timer to 64
[ 3.941139] scsi0 : pata_amd
[ 3.941304] scsi1 : pata_amd
[ 3.941656] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14
[ 3.941660] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15
[ 3.941926] ahci 0000:00:09.0: version 3.0
[ 3.942136] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 22
[ 3.942161] ahci 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 22 (level, low) -> IRQ 22
[ 3.942212] ahci 0000:00:09.0: controller can do NCQ, turning on CAP_NCQ
[ 3.942215] ahci 0000:00:09.0: controller can't do PMP, turning off CAP_PMP
[ 3.942293] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[ 3.942297] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pio
[ 3.942302] ahci 0000:00:09.0: setting latency timer to 64
[ 3.943483] scsi2 : ahci
[ 3.943597] scsi3 : ahci
[ 3.943697] scsi4 : ahci
[ 3.943794] scsi5 : ahci
[ 3.943969] ata3: SATA max UDMA/133 abar m8192@0xfc484000 port 0xfc484100 irq 22
[ 3.943973] ata4: SATA max UDMA/133 abar m8192@0xfc484000 port 0xfc484180 irq 22
[ 3.943977] ata5: SATA max UDMA/133 abar m8192@0xfc484000 port 0xfc484200 irq 22
[ 3.943981] ata6: SATA max UDMA/133 abar m8192@0xfc484000 port 0xfc484280 irq 22
[ 3.985649] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.986673] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 17 (level, low) -> IRQ 17
[ 3.986714] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 3.986718] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 3.986741] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
[ 3.986769] ohci_hcd 0000:00:02.0: irq 17, io mem 0xfc486000
[ 4.042058] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.042063] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.042066] usb usb3: Product: OHCI Host Controller
[ 4.042069] usb usb3: Manufacturer: Linux 3.2.0-2-amd64 ohci_hcd
[ 4.042071] usb usb3: SerialNumber: 0000:00:02.0
[ 4.042267] hub 3-0:1.0: USB hub found
[ 4.042274] hub 3-0:1.0: 5 ports detected
[ 4.042461] ohci_hcd 0000:00:04.0: PCI INT A -> Link[Z012] -> GSI 16 (level, low) -> IRQ 16
[ 4.042495] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 4.042498] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 4.042512] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
[ 4.042537] ohci_hcd 0000:00:04.0: irq 16, io mem 0xfc487000
[ 4.098224] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.098228] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.098232] usb usb4: Product: OHCI Host Controller
[ 4.098234] usb usb4: Manufacturer: Linux 3.2.0-2-amd64 ohci_hcd
[ 4.098237] usb usb4: SerialNumber: 0000:00:04.0
[ 4.098411] hub 4-0:1.0: USB hub found
[ 4.098418] hub 4-0:1.0: 5 ports detected
[ 4.104348] ata1.00: ATAPI: Optiarc DVD RW AD-7560A, DH10, max MWDMA2
[ 4.104359] ata1: nv_mode_filter: 0x39f&0x739f->0x39f, BIOS=0x0 (0xc600) ACPI=0x39f (120:600:0x12)
[ 4.112155] firewire_core: created device fw0: GUID 08e40a006f285031, S400
[ 4.120267] ata1.00: configured for MWDMA2
[ 4.121669] scsi 0:0:0:0: CD-ROM Optiarc DVD RW AD-7560A DH10 PQ: 0 ANSI: 5
[ 4.121933] ata2: port disabled--ignoring
[ 4.264035] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.264054] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.264072] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.264088] ata5: SATA link down (SStatus 0 SControl 300)
[ 4.264849] ata3.00: ATA-8: Hitachi HTS543225L9A300, FBEOC40J, max UDMA/100
[ 4.264853] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 4.265800] ata3.00: configured for UDMA/100
[ 4.265971] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54322 FBEO PQ: 0 ANSI: 5
[ 4.279019] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.279026] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.279231] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 4.279680] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 4.279744] sd 2:0:0:0: [sda] Write Protect is off
[ 4.279748] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.279773] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.300048] usb 1-4: new high-speed USB device number 3 using ehci_hcd
[ 4.322544] sda: sda1 sda2 sda3 sda4
[ 4.323197] sd 2:0:0:0: [sda] Attached SCSI disk
[ 4.449739] usb 1-4: New USB device found, idVendor=04f2, idProduct=b016
[ 4.449744] usb 1-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 4.449748] usb 1-4: Product: HP Webcam
[ 4.449750] usb 1-4: Manufacturer: Chicony Electronics Co., Ltd.
[ 4.449753] usb 1-4: SerialNumber: SN0001
[ 4.624044] usb 3-1: new low-speed USB device number 2 using ohci_hcd
[ 4.837093] usb 3-1: New USB device found, idVendor=046d, idProduct=c51b
[ 4.837099] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.837103] usb 3-1: Product: USB Receiver
[ 4.837105] usb 3-1: Manufacturer: Logitech
[ 4.856459] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1:1.0/input/input1
[ 4.856589] generic-usb 0003:046D:C51B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-1/input0
[ 4.865221] generic-usb 0003:046D:C51B.0002: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.0-1/input1
[ 4.865249] usbcore: registered new interface driver usbhid
[ 4.865252] usbhid: USB HID core driver
[ 5.040538] Btrfs loaded
[ 5.178068] kjournald starting. Commit interval 5 seconds
[ 5.178124] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 15.507798] udevd[391]: starting version 175
[ 15.776833] ACPI: processor limited to max C-state 1
[ 15.777556] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 15.778412] ACPI: Lid Switch [LID0]
[ 15.778521] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 15.778528] ACPI: Sleep Button [SLPB]
[ 15.778608] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 15.778613] ACPI: Power Button [PWRB]
[ 15.778726] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 15.778730] ACPI: Power Button [PWRF]
[ 15.827103] i2c i2c-0: nForce2 SMBus adapter at 0x3040
[ 15.827138] i2c i2c-1: nForce2 SMBus adapter at 0x3000
[ 15.970626] acpi device:1c: registered as cooling_device2
[ 15.970764] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 15.970773] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 15.971525] wmi: Mapper loaded
[ 16.097530] udevd[423]: renamed network interface eth0 to eth1
[ 16.312097] ACPI: Battery Slot [BAT0] (battery absent)
[ 16.480593] MCE: In-kernel MCE decoding enabled.
[ 16.499168] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 16.510627] ACPI: AC Adapter [ADP1] (on-line)
[ 16.537088] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 16.555289] lib80211: common routines for IEEE802.11 drivers
[ 16.555295] lib80211_crypt: registered algorithm 'NULL'
[ 16.677123] input: HP WMI hotkeys as /devices/virtual/input/input8
[ 16.822273] r592 0000:01:09.2: PCI INT B -> Link[LNK2] -> GSI 10 (level, low) -> IRQ 10
[ 16.822442] r592: driver successfully loaded
[ 16.849366] r852 0000:01:09.3: PCI INT B -> Link[LNK2] -> GSI 10 (level, low) -> IRQ 10
[ 16.849487] r852: driver loaded successfully
[ 16.917389] EDAC MC: Ver: 2.1.0
[ 16.921732] AMD64 EDAC driver v3.4.0
[ 16.922405] EDAC amd64: DRAM ECC disabled.
[ 16.922418] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 16.922420] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 16.922422] (Note that use of the override may cause unknown side effects.)
[ 17.222603] wl: module license 'MIXED/Proprietary' taints kernel.
[ 17.222608] Disabling lock debugging due to kernel taint
[ 17.250258] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 21
[ 17.250284] wl 0000:08:00.0: PCI INT A -> Link[LK4E] -> GSI 21 (level, low) -> IRQ 21
[ 17.250291] wl 0000:08:00.0: setting latency timer to 64
[ 17.447496] lib80211_crypt: registered algorithm 'TKIP'
[ 17.448227] wlan0: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.100.82.112
[ 17.482553] input: PS/2 Mouse as /devices/platform/i8042/serio2/input/input9
[ 17.505671] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input10
[ 17.522392] Linux media interface: v0.10
[ 17.759362] Linux video capture interface: v2.00
[ 17.815686] uvcvideo: Found UVC 1.00 device HP Webcam (04f2:b016)
[ 17.815949] audit: name_count maxed, losing inode data: dev=00:06, inode=4012
[ 17.815955] audit: name_count maxed, losing inode data: dev=00:06, inode=4012
[ 17.815960] audit: name_count maxed, losing inode data: dev=00:06, inode=4012
[ 17.815965] audit: name_count maxed, losing inode data: dev=00:06, inode=4004
[ 17.815969] audit: name_count maxed, losing inode data: dev=00:06, inode=4017
[ 17.815976] audit: name_count maxed, losing inode data: dev=00:06, inode=4017
[ 17.815981] audit: name_count maxed, losing inode data: dev=00:06, inode=4017
[ 17.815985] audit: name_count maxed, losing inode data: dev=00:06, inode=4017
[ 17.815990] audit: name_count maxed, losing inode data: dev=00:06, inode=4004
[ 17.816039] audit: name_count maxed, losing inode data: dev=00:06, inode=4022
[ 17.816044] audit: name_count maxed, losing inode data: dev=00:06, inode=4022
[ 17.816050] audit: name_count maxed, losing inode data: dev=00:06, inode=4022
[ 17.816057] audit: name_count maxed, losing inode data: dev=00:06, inode=4022
[ 17.816064] audit: name_count maxed, losing inode data: dev=00:06, inode=4004
[ 17.816068] audit: name_count maxed, losing inode data: dev=00:06, inode=4027
[ 17.816073] audit: name_count maxed, losing inode data: dev=00:06, inode=4027
[ 17.816082] audit: name_count maxed, losing inode data: dev=00:06, inode=4027
[ 17.816086] audit: name_count maxed, losing inode data: dev=00:06, inode=4027
[ 17.816091] audit: name_count maxed, losing inode data: dev=00:06, inode=4004
[ 17.816098] audit: name_count maxed, losing inode data: dev=00:06, inode=4032
[ 17.816103] audit: name_count maxed, losing inode data: dev=00:06, inode=4032
[ 17.816107] audit: name_count maxed, losing inode data: dev=00:06, inode=4032
[ 17.816112] audit: name_count maxed, losing inode data: dev=00:06, inode=4032
[ 17.819240] input: HP Webcam as /devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4:1.0/input/input11
[ 17.819843] usbcore: registered new interface driver uvcvideo
[ 17.819847] USB Video Class driver (1.1.1)
[ 17.825625] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
[ 17.825652] snd_hda_intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 20 (level, low) -> IRQ 20
[ 17.825656] hda_intel: Disabling MSI
[ 17.825724] snd_hda_intel 0000:00:07.0: setting latency timer to 64
[ 18.326471] hda_codec: CX20561 (Hermosa): BIOS auto-probing.
[ 18.436133] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:07.0/input/input12
[ 18.540817] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 19
[ 18.540845] nvidia 0000:00:12.0: PCI INT A -> Link[LGPU] -> GSI 19 (level, low) -> IRQ 19
[ 18.540856] nvidia 0000:00:12.0: setting latency timer to 64
[ 18.540862] vgaarb: device changed decodes: PCI:0000:00:12.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 18.541232] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.20 Mon Feb 6 21:07:30 PST 2012
[ 19.654678] Adding 2096476k swap on /dev/sda3. Priority:-1 extents:1 across:2096476k
[ 19.899316] EXT3-fs (sda1): using internal journal
[ 19.982744] device-mapper: uevent: version 1.0.3
[ 19.983080] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 20.090889] audit: name_count maxed, losing inode data: dev=00:06, inode=10
[ 20.090896] audit: name_count maxed, losing inode data: dev=00:06, inode=5297
[ 20.091021] audit: name_count maxed, losing inode data: dev=00:06, inode=10
[ 20.091026] audit: name_count maxed, losing inode data: dev=00:06, inode=5300
[ 20.091157] audit: name_count maxed, losing inode data: dev=00:06, inode=10
[ 20.091162] audit: name_count maxed, losing inode data: dev=00:06, inode=5303
[ 20.091237] loop: module loaded
[ 20.757706] kjournald starting. Commit interval 5 seconds
[ 20.757820] EXT3-fs (sda2): warning: maximal mount count reached, running e2fsck is recommended
[ 20.758163] EXT3-fs (sda2): using internal journal
[ 20.758169] EXT3-fs (sda2): mounted filesystem with ordered data mode
[ 21.299495] PPP generic driver version 2.4.2
[ 21.906228] fuse init (API version 7.17)
[ 23.875769] forcedeth 0000:00:0a.0: irq 42 for MSI/MSI-X
[ 23.875980] forcedeth 0000:00:0a.0: eth1: no link during initialization
[ 23.877913] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 26.919331] lp: driver loaded but no devices found
[ 26.928567] ppdev: user-space parallel port driver
[ 33.821257] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 TK-57 (2 cpu cores) (version 2.20.00)
[ 33.821732] powernow-k8: fid 0xb (1900 MHz), vid 0x13
[ 33.821736] powernow-k8: fid 0xa (1800 MHz), vid 0x14
[ 33.821738] powernow-k8: fid 0x8 (1600 MHz), vid 0x15
[ 33.821741] powernow-k8: fid 0x0 (800 MHz), vid 0x1a
[ 34.627352] vboxdrv: Found 2 processor cores.
[ 34.630117] vboxdrv: fAsync=1 offMin=0x1e791e offMax=0x1e791e
[ 34.630705] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
[ 34.630713] vboxdrv: Successfully loaded version 4.1.8_Debian (interface 0x00190000).
[ 34.705116] vboxpci: IOMMU not found (not registered)
[ 45.812116] type=1300 audit(1334661566.091:39248): arch=c000003e syscall=2 success=no exit=-2 a0=40ab82 a1=90800 a2=20 a3=0 items=1 ppid=2172 pid=2173 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="modprobe" exe="/sbin/modprobe" key=(null)
[ 45.812139] type=1307 audit(1334661566.091:39248): cwd="/"
[ 45.812148] type=1302 audit(1334661566.091:39248): item=0 name="/run/modprobe.d"
[ 45.812163] type=1300 audit(1334661566.091:39249): arch=c000003e syscall=2 success=no exit=-2 a0=40ab82 a1=0 a2=1b6 a3=0 items=1 ppid=2172 pid=2173 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="modprobe" exe="/sbin/modprobe" key=(null)
[ 45.812179] type=1307 audit(1334661566.091:39249): cwd="/"
[ 45.812187] type=1302 audit(1334661566.091:39249): item=0 name="/run/modprobe.d"
[ 45.812198] type=1305 audit(1334661566.091:39250): auid=4294967295 ses=4294967295 op="remove rule" key=(null) list=4 res=1
[ 45.812208] type=1305 audit(1334661566.095:39251): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 res=1
glenn@laptop:~$