ethernet connection not working

[gutirex]

Hey guys im new using linux, and my wireless connection is working just perfect but i cant connect to my wired network, i tred to config the wired connection according to every forum i read nothing happened so asking if someone has any advice for me, well i think it will be easy knowing that my wireless work properly, another thing is that after "configurate" the wired connection its still not available "the wired network connection" on the icon for network connections showed in the task bar, just available the wireless connections

[remoulder]

Open a terminal, enter nm-tool, copy and paste the output back here.

[gutirex]

- Device: wlan0 [Auto ] -----------------------------------------------
Type: 802.11 WiFi
Driver: iwl3945
State: connected
Default: yes
HW Address: 00:1B:77:68:AA:EB

Capabilities:
Speed: 54 Mb/s

Wireless Properties
WEP Encryption: yes
WPA Encryption: yes
WPA2 Encryption: yes

Wireless Access Points (* = current AP)
59793307: Infra, 80:C6:AB:80:40:09, Freq 2437 MHz, Rate 54 Mb/s, Strength 34 WEP
UNE_SANCHEZ MELENDEZ: Infra, 00:24:17:40:44:D6, Freq 2462 MHz, Rate 48 Mb/s, Strength 48 WEP
57035578: Infra, 00:24:8C:68:5A:69, Freq 2437 MHz, Rate 54 Mb/s, Strength 32 WEP
Une_Quintana: Infra, 00:26:44:63:5C:B9, Freq 2462 MHz, Rate 54 Mb/s, Strength 37 WPA WPA2
Une_ sanchez sanabria: Infra, 00:26:44:76:3C:FE, Freq 2462 MHz, Rate 54 Mb/s, Strength 37 WPA WPA2
56880743: Infra, 00:24:8C:68:E0:5D, Freq 2462 MHz, Rate 54 Mb/s, Strength 57 WEP
61924650: Infra, E0:69:95:A2:05:B4, Freq 2437 MHz, Rate 54 Mb/s, Strength 52 WEP
UNE_SANCHEZ MELENDEZ: Infra, 00:24:17:40:44:D6, Freq 2462 MHz, Rate 54 Mb/s, Strength 37 WPA
JORGEMENDEZ1: Infra, B4:82:FE:9E:CC:D0, Freq 2462 MHz, Rate 54 Mb/s, Strength 45 WPA
carlosfrc1: Infra, 00:21:63:C2:32:1D, Freq 2462 MHz, Rate 54 Mb/s, Strength 37 WPA
MAJO: Infra, 00:1B:9E:F9:5D:6F, Freq 2412 MHz, Rate 54 Mb/s, Strength 51 WPA
56718877: Infra, 48:5B:39:73:FE:E9, Freq 2437 MHz, Rate 54 Mb/s, Strength 44 WEP
FamiliaMosquera: Infra, 00:21:63:8C:6D:BE, Freq 2412 MHz, Rate 54 Mb/s, Strength 62 WPA
53972303: Infra, 48:5B:39:0D:8A:FB, Freq 2442 MHz, Rate 54 Mb/s, Strength 35 WEP
*UNEMEJIA: Infra, 00:24:17:40:3F:42, Freq 2412 MHz, Rate 54 Mb/s, Strength 77 WEP
CPE-WI-FI_ETB: Infra, 98:F5:37:39:39:64, Freq 2432 MHz, Rate 54 Mb/s, Strength 61
RT2561_2: Infra, 00:1B:9E:CF:E2:8D, Freq 2457 MHz, Rate 54 Mb/s, Strength 75
4986501: Infra, E0:69:95:A0:88:99, Freq 2412 MHz, Rate 54 Mb/s, Strength 54 WEP
23264922: Infra, 00:21:00:4C:36:EB, Freq 2437 MHz, Rate 54 Mb/s, Strength 48 WEP
Une epm cortes mejia: Infra, 00:26:44:79:9E:02, Freq 2462 MHz, Rate 54 Mb/s, Strength 52 WPA
Santiago: Infra, 64:68:0C:EC:C1:4B, Freq 2437 MHz, Rate 54 Mb/s, Strength 50 WPA
etb: Infra, 00:1B:9E:CF:E2:8C, Freq 2457 MHz, Rate 54 Mb/s, Strength 60 WPA

IPv4 Settings:
Address: 192.168.1.66
Prefix: 24 (255.255.255.0)
Gateway: 192.168.1.254

DNS: 192.168.1.254


- Device: eth0 -----------------------------------------------------------------
Type: Wired
Driver: b44
State: unavailable
Default: no
HW Address: 00:19:B9:82:1C:5A

Capabilities:
Carrier Detect: yes
Speed: 10 Mb/s

Wired Properties
Carrier: off


this is what came out after writing nm-tool!!

[leae89]

Hi there. I got the same network issue.
Here are the results of my system:

NetworkManager Tool

State: connected (global)

- Device: wlan0 [Casa (Wi-Fi)] ------------------------------------------------
Type: 802.11 WiFi
Driver: iwlagn
State: connected
Default: yes
HW Address: 00:1E:64:2A:E9:AA

Capabilities:
Speed: 5 Mb/s

Wireless Properties
WEP Encryption: yes
WPA Encryption: yes
WPA2 Encryption: yes

Wireless Access Points (* = current AP)
*7e92: Infra, 00:24:2B:A5:5D:4A, Freq 2462 MHz, Rate 54 Mb/s, Strength 100 WEP
329a: Infra, 00:25:56:32:66:12, Freq 2412 MHz, Rate 54 Mb/s, Strength 24 WEP
21ce: Infra, EC:55:F9:B4:76:7F, Freq 2412 MHz, Rate 54 Mb/s, Strength 29 WEP

IPv4 Settings:
Address: 192.168.0.14
Prefix: 24 (255.255.255.0)
Gateway: 192.168.0.1

DNS: 208.67.220.220
DNS: 208.67.222.222
DNS: 8.8.4.4

[iphg93]

At least say how you solved it guys!!

[leae89]

At least say how you solved it guys!!

Sorry.

I'll mention my case: First my ethernet connection was not detecting anything, but suddenly it worked (and I thought "what the...?"). I could say that my problem is solved (for now).

[Matu]

I have the same problems guys on my office computer which is an i5, with dual boot capability of linux mint 11 and windows 7.I can be able to view the other system in the LAN but the internet doesnt work. Once I try to connect it automatically, its showing that the connection has been established but I cant browse.
Anybody with a solution?