Black screen when booting LMDE 201204 with Intel graphics
Forum rules
LMDE 2 has reached end of support as of 1-1-2019
LMDE 2 has reached end of support as of 1-1-2019
Black screen when booting LMDE 201204 with Intel graphics
Hi all,
This should probably be marked [SOLVED] since I managed to find a workaround, but I thought I would post my experiences here in case it might help somebody else with the same problem.
The problem: When booting a Foxconn 45CSX barebones system (which has an Intel GMA 950 graphics chip) from the 201204-mate-cinnamon image, the system seems to boot normally, but when the gui starts loading, the screen goes black, the mouse cursor makes a brief appearance, and then the screen goes black again. I managed to install by hitting Ctrl+Alt+Backspace, which took me to the mdm login screen, changing the session to Cinnamon and logging in with username "mint" and no password. That loaded Cinnamon and I was able to run the installer.
However, after the install completes, when it tries to load MATE it exhibits the same behavior with the screen going black. I found that if I added "nomodeset acpi=off" to the grub boot options I could get MATE to load, but then there's no acpi. After a lot of googling, I found this:
http://wiki.debian.org/KernelModesetting (See the section under known bugs for 945GM and 82865G)
Which led me to experiment with setting options for i915 at boot. I found that if I added "i915.modeset=0" to the grub boot options, I could load MATE without having to disable acpi or using nomodeset, so I added that to /etc/default/grub under the GRUB_CMDLINE_LINUX_DEFAULT option and ran update-grub to make it permanent. This must override the setting in /etc/modprobe.d/i915-kms.conf, which has modeset=1. So probably changing that would work too.
So, those are my findings. Not sure if it warrants a bug report.
Cheers,
rootchick
This should probably be marked [SOLVED] since I managed to find a workaround, but I thought I would post my experiences here in case it might help somebody else with the same problem.
The problem: When booting a Foxconn 45CSX barebones system (which has an Intel GMA 950 graphics chip) from the 201204-mate-cinnamon image, the system seems to boot normally, but when the gui starts loading, the screen goes black, the mouse cursor makes a brief appearance, and then the screen goes black again. I managed to install by hitting Ctrl+Alt+Backspace, which took me to the mdm login screen, changing the session to Cinnamon and logging in with username "mint" and no password. That loaded Cinnamon and I was able to run the installer.
However, after the install completes, when it tries to load MATE it exhibits the same behavior with the screen going black. I found that if I added "nomodeset acpi=off" to the grub boot options I could get MATE to load, but then there's no acpi. After a lot of googling, I found this:
http://wiki.debian.org/KernelModesetting (See the section under known bugs for 945GM and 82865G)
Which led me to experiment with setting options for i915 at boot. I found that if I added "i915.modeset=0" to the grub boot options, I could load MATE without having to disable acpi or using nomodeset, so I added that to /etc/default/grub under the GRUB_CMDLINE_LINUX_DEFAULT option and ran update-grub to make it permanent. This must override the setting in /etc/modprobe.d/i915-kms.conf, which has modeset=1. So probably changing that would work too.
So, those are my findings. Not sure if it warrants a bug report.
Cheers,
rootchick
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 1 time in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Re: Black screen when booting LMDE 201204 with Intel graphic
This helped me out on my Thinkpad L420 with Intel HD3000 graphics. Thanks!
Re: Black screen when booting LMDE 201204 with Intel graphic
Great, I'm glad it worked for you!Supamarioana wrote:This helped me out on my Thinkpad L420 with Intel HD3000 graphics. Thanks!
Re: Black screen when booting LMDE 201204 with Intel graphic
What could I do, if ctrl + alt + backspace doesn't do anything when I boot up the live CD? If compatibility mode or not, it doesn't matter. I have a Thinkpad L520, also with intel hd3000 graphics.
Re: Black screen when booting LMDE 201204 with Intel graphic
You could try Ctrl-Alt-Delete instead. What I also noticed was that the laptop tried to display via external monitor. Although none was connected!
So maybe you could try connecting an external monitor for installation.
So maybe you could try connecting an external monitor for installation.
Re: Black screen when booting LMDE 201204 with Intel graphic
ctrl + alt + del doesn't work either. And unfortunately I don't have an external monitor, but even if I had, I usually take my notebook with me, so that's not really an option. But thanks for the reply.
Re: Black screen when booting LMDE 201204 with Intel graphic
Do you get a console when you hit Ctrl+Alt+F1?
Re: Black screen when booting LMDE 201204 with Intel graphic
Darvon, you could try adding i915.modeset=0 to the grub boot options. I think this could get you there (working from memory here, things may be slightly different):
When you see text about grub during boot, press Esc.
On the list of boot options, hit Tab to edit the Linux Mint entry.
Arrow down to the line ending with "quiet". After "quiet", add i915.modeset=0.
Hit F10 to boot.
If that works, after you install you'll have to change it permanently.
When you see text about grub during boot, press Esc.
On the list of boot options, hit Tab to edit the Linux Mint entry.
Arrow down to the line ending with "quiet". After "quiet", add i915.modeset=0.
Hit F10 to boot.
If that works, after you install you'll have to change it permanently.
Re: Black screen when booting LMDE 201204 with Intel graphic
For some reason with Intel this is the best solution. Don't ask me why, but it always works for me.rootchick wrote:Darvon, you could try adding i915.modeset=0 to the grub boot options. I think this could get you there (working from memory here, things may be slightly different):
When you see text about grub during boot, press Esc.
On the list of boot options, hit Tab to edit the Linux Mint entry.
Arrow down to the line ending with "quiet". After "quiet", add i915.modeset=0.
Hit F10 to boot.
If that works, after you install you'll have to change it permanently.
Re: Black screen when booting LMDE 201204 with Intel graphic
Hey thanks, it helped!
The problem was that when you enter the boot options, there are two dashes at the end, something like that:
And I tried to enter that i915 parameter at the end, but you have to enter it before the dashes, like this:
Now I could finally boot up the CD! Installing will have to wait until tomorrow So, thanks for the help!
The problem was that when you enter the boot options, there are two dashes at the end, something like that:
Code: Select all
... quiet --
Code: Select all
... quiet i915.modeset=0 --
Re: Black screen when booting LMDE 201204 with Intel graphic
adding this to boot options in grub works great also on my DELL Latitude E6430 with HD4000 graphics
thanks a lot for pointing this solution!
now I can successfully install and run LMDE!
Code: Select all
i915.modeset=0
now I can successfully install and run LMDE!
Re: Black screen when booting LMDE 201204 with Intel graphic
See post below...rootchick wrote:If that works, after you install you'll have to change it permanently.
Last edited by lmdewheezy on Tue Feb 12, 2013 4:16 pm, edited 1 time in total.
Re: Black screen when booting LMDE 201204 with Intel graphic
Yep, that works too.This must override the setting in /etc/modprobe.d/i915-kms.conf, which has modeset=1. So probably changing that would work too.
So, those are my findings. Not sure if it warrants a bug report.
Cheers,
rootchick