I have 4 computers with linux and win xp on them one dedicated to linux mint 13 one with ubuntu 12.04 dual booted with win 7, another with ubuntu 10.10. I have a netgear router n 300 wireless router WNR2000 v3.
I want them to communicate among them selves with a wireless local network. I have them all on the internet but not communicating among themselves. Is there a wireless tutorial for local network setup or or can i get the help I need here.
I can set up the windows side but I can't setup the linux side. As I see it i'm probably going to have to use the terminal but I don't know the commands or the perameters. So if there is any help I would apreciate it.
thanks,
Nate
how to get wireless local networking setup?
Forum rules
There are no such things as "stupid" questions. However if you think your question is a bit stupid, then this is the right place for you to post it. Stick to easy to-the-point questions that you feel people can answer fast. For long and complicated questions use the other forums in the support section.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
There are no such things as "stupid" questions. However if you think your question is a bit stupid, then this is the right place for you to post it. Stick to easy to-the-point questions that you feel people can answer fast. For long and complicated questions use the other forums in the support section.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
how to get wireless local networking setup?
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 1 time in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Re: how to get wireless local networking setup?
Suggestions:
To create shares on the Linux boxes ( it's a lot like creating Simple Shares on WinXP - right click > Sharing Options in Nautilus ):
Simple File Sharing in Mint: http://forums.linuxmint.com/viewtopic.php?f=42&t=23169
Go through the checklist on all your Linux boxes:
Samba Browsing Problems Checklist: http://forums.linuxmint.com/viewtopic.p ... 46&start=0
If you have problems after all that then posting the output of each of the following commands will aid in diagnosing the problem:
To create shares on the Linux boxes ( it's a lot like creating Simple Shares on WinXP - right click > Sharing Options in Nautilus ):
Simple File Sharing in Mint: http://forums.linuxmint.com/viewtopic.php?f=42&t=23169
Go through the checklist on all your Linux boxes:
Samba Browsing Problems Checklist: http://forums.linuxmint.com/viewtopic.p ... 46&start=0
If you have problems after all that then posting the output of each of the following commands will aid in diagnosing the problem:
Code: Select all
testparm -s
net usershare info --long
smbtree
Please add a [SOLVED] at the end of your original subject header if your question has been answered and solved.
Re: how to get wireless local networking setup?
It depends what you mean with "communicate". If you mean sharing folders or browsing etc... If all PCs use the same router as gateway to internet it means they are automatically assigned to the same LAN, this means that you should be able to ping them each other by typing:
If you want to make a fully browsable LAN i suggest you to check the samba server/client documentation. The samba protocol is supported by windows as well.
Code: Select all
ping IP-of-the-wifi-card
Re: how to get wireless local networking setup?
If you had the same users on every computer and likely the same password (if you are the owner of all the machines (computers)), then you could easily access any other computer's /home folders and have no permission problems moving any of the files around
http://forums.linuxmint.com/viewtopic.p ... 69&start=0
http://nfs.sourceforge.net/nfs-howto/
http://www.interopsystems.com/LearningC ... onents.htm
--the windows support for NFS (Network file Sharing)
NFS is actually a faster running file sharing method than Samba, which is essentially a reverse engineered kludge to inter-operate with windows CIFS file sharing
--however since Samba is offered as a default, most people will follow its processes
- If not that, then you would have to allow shares to exist on the computers you wanted to connect into..
http://forums.linuxmint.com/viewtopic.p ... 69&start=0
http://nfs.sourceforge.net/nfs-howto/
http://www.interopsystems.com/LearningC ... onents.htm
--the windows support for NFS (Network file Sharing)
NFS is actually a faster running file sharing method than Samba, which is essentially a reverse engineered kludge to inter-operate with windows CIFS file sharing
--however since Samba is offered as a default, most people will follow its processes
Re: how to get wireless local networking setup?
It depends what you mean with "communicate". If you mean sharing folders or browsing etc...
i'm sorry i used the term communicate. Sharing is what i want and my netgear router is not on the internet .... My only access to the internte is done through the verizon broadband hot spot on my cell phone.
Thanks,
Nate
Re: how to get wireless local networking setup?
1- Your router doesn't have a WAN connection, but is this an issue or a your free choiche?
2- In order to have File Sharing you received many good suggestions, first be sure all the machines are plugged to the Netgear router, be sure you set DHCP on if you use dynamic IPs, or to set static IPs set DHCP off. Be sure all the IPs are in the same subnet (ex. Netgear IP= 192.168.1.1 / Machine1 IP=192.168.1.2 / Machine3 IP=192.168.1.3 etc...) the range is 1-254.
3- Be sure you have samba installed on all Linux machines typeing:.
4- To install it if not present (you need both client/server) type:.
5- To set samba edit file /etc/samba/smb.conf you can find many tutorials to edit it according to your needs.
2- In order to have File Sharing you received many good suggestions, first be sure all the machines are plugged to the Netgear router, be sure you set DHCP on if you use dynamic IPs, or to set static IPs set DHCP off. Be sure all the IPs are in the same subnet (ex. Netgear IP= 192.168.1.1 / Machine1 IP=192.168.1.2 / Machine3 IP=192.168.1.3 etc...) the range is 1-254.
3- Be sure you have samba installed on all Linux machines typeing:
Code: Select all
smbd --version
4- To install it if not present (you need both client/server) type:
Code: Select all
sudo apt-get install samba samba-common
5- To set samba edit file /etc/samba/smb.conf you can find many tutorials to edit it according to your needs.
Re: how to get wireless local networking setup?
The version i get is Version 3.6.3 . synaptic says it's installed ... i"m not exactly sure what to do next .... I'm reading up though ...
I don't know how to get my nic cards ip addresses nor the mac addresses (these are WIRELESS cards and adapters) . If I'm doing DHCP do I have anything to do with assigning ip addresses. This is all local wireless network I'm trying to do ...
Thanks,
Nate
I don't know how to get my nic cards ip addresses nor the mac addresses (these are WIRELESS cards and adapters) . If I'm doing DHCP do I have anything to do with assigning ip addresses. This is all local wireless network I'm trying to do ...
Thanks,
Nate