On my stopwatch, the desktop loaded after 2 minutes and 26 second (on LMDE KDE) and ~ 2 minutes on Mint 13 KDE, but dmesg only show 55 sec..
here's dmesg part on lmde:
Code: Select all
[ 10.020991] uvesafb: VBIOS/hardware supports DDC2 transfers
[ 10.360169] uvesafb: monitor limits: vf = 60 Hz, hf = 48 kHz, clk = 71 MHz
[ 10.360642] uvesafb: scrolling: redraw
[ 10.360652] uvesafb: request region 0x3c0-0x3e0 failed
[ 10.361257] uvesafb: probe of uvesafb.0 failed with error -5
[ 10.365750] vga16fb: initializing
[ 10.365759] vga16fb: mapped to 0xffff8800000a0000
[ 10.365770] checking generic (c0000000 300000) vs hw (a0000 10000)
[ 10.365883] fb1: VGA16 VGA frame buffer device
[ 10.997940] Btrfs loaded
[ 11.313187] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 15.258619] udevd[381]: starting version 175
[ 16.547084] ACPI: acpi_idle registered with cpuidle
[ 16.946013] powernow-k8: Found 1 AMD E-350 Processor (2 cpu cores) (version 2.20.00)
[ 16.946176] powernow-k8: 0 : pstate 0 (1600 MHz)
[ 16.946180] powernow-k8: 1 : pstate 1 (1280 MHz)
[ 16.946184] powernow-k8: 2 : pstate 2 (800 MHz)
[ 17.014955] asus_wmi: ASUS WMI generic driver loaded
[ 17.220344] ACPI: Battery Slot [BAT0] (battery present)
[ 17.220820] ACPI: AC Adapter [AC0] (off-line)
[ 17.232151] asus_wmi: Initialization: 0x0
[ 17.233078] asus_wmi: BIOS WMI version: 0.9
[ 17.233440] asus_wmi: SFUN value: 0x0
[ 17.235219] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input6
[ 17.237038] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SMRG [io 0xb00-0xb0f]
[ 17.237051] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 17.245882] asus_wmi: Backlight controlled by ACPI video driver
[ 17.250285] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 17.250490] SP5100 TCO timer: mmio address 0xbafe00 already in use
[ 17.373243] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 17.373258] Disabling lock debugging due to kernel taint
[ 17.456306] [fglrx] Maximum main memory to use for locked dma buffers: 3414 MBytes.
[ 17.456483] [fglrx] vendor: 1002 device: 9802 count: 1
[ 17.457050] [fglrx] ioport: bar 1, base 0xf000, size: 0x100
[ 17.457074] pci 0000:00:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 17.457083] pci 0000:00:01.0: setting latency timer to 64
[ 17.457522] [fglrx] Kernel PAT support is enabled
[ 17.457567] [fglrx] module loaded - fglrx 8.98.2 [Jul 27 2012] with 1 minors
[ 17.480143] cfg80211: Calling CRDA to update world regulatory domain
[ 17.483088] Bluetooth: Core ver 2.16
[ 17.483133] NET: Registered protocol family 31
[ 17.483137] Bluetooth: HCI device and connection manager initialized
[ 17.483142] Bluetooth: HCI socket layer initialized
[ 17.483146] Bluetooth: L2CAP socket layer initialized
[ 17.483156] Bluetooth: SCO socket layer initialized
[ 17.575972] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 17.576905] usbcore: registered new interface driver btusb
[ 18.131265] brcmsmac 0000:01:00.0: bus 1 slot 0 func 0 irq 7
[ 18.131376] brcmsmac 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 18.131392] brcmsmac 0000:01:00.0: setting latency timer to 64
[ 18.149452] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0400
[ 18.233158] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 18.375559] snd_hda_intel 0000:00:01.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 18.375706] snd_hda_intel 0000:00:01.1: irq 43 for MSI/MSI-X
[ 18.375766] snd_hda_intel 0000:00:01.1: setting latency timer to 64
[ 18.507411] cfg80211: World regulatory domain updated:
[ 18.507425] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 18.507436] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.507447] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 18.507456] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 18.507465] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.507474] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.584196] Bluetooth: hci0 command tx timeout
[ 18.745148] Linux media interface: v0.10
[ 18.784179] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 18.784569] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input8
[ 18.786256] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 18.920244] Linux video capture interface: v2.00
[ 18.958399] uvcvideo: Found UVC 1.00 device USB2.0 UVC VGA WebCam (13d3:5702)
[ 18.979570] input: USB2.0 UVC VGA WebCam as /devices/pci0000:00/0000:00:13.2/usb2/2-4/2-4:1.0/input/input9
[ 18.980786] usbcore: registered new interface driver uvcvideo
[ 18.980798] USB Video Class driver (1.1.1)
[ 19.000275] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[ 19.003338] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[ 19.255336] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 19.258334] cfg80211: Calling CRDA for country: US
[ 19.271535] cfg80211: Regulatory domain changed to country: US
[ 19.271544] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 19.271550] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 19.271555] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 19.271559] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.271564] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.271569] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.271573] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 23.541713] Adding 3066876k swap on /dev/sda2. Priority:-1 extents:1 across:3066876k
[ 23.600133] EXT4-fs (sda6): re-mounted. Opts: (null)
[ 24.493413] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 24.982824] device-mapper: uevent: version 1.0.3
[ 24.984267] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 25.306231] loop: module loaded
[ 27.958645] EXT4-fs (sda5): warning: maximal mount count reached, running e2fsck is recommended
[ 27.961564] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 28.334712] fuse init (API version 7.17)
[ 39.722818] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12
[ 42.574920] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 42.574932] Bluetooth: BNEP filters: protocol multicast
[ 42.586109] Bluetooth: RFCOMM TTY layer initialized
[ 42.586128] Bluetooth: RFCOMM socket layer initialized
[ 42.586135] Bluetooth: RFCOMM ver 1.11
[ 44.005148] lp: driver loaded but no devices found
[ 44.129583] ppdev: user-space parallel port driver
[ 45.038049] ieee80211 phy0: brcms_ops_config: change monitor mode: false (implement)
[ 45.038068] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 45.038968] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 45.039931] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 51.278104] usbcore: registered new interface driver usbserial
[ 51.278159] USB Serial support registered for generic
[ 51.278795] usbcore: registered new interface driver usbserial_generic
[ 51.278803] usbserial: USB Serial Driver core
[ 52.539797] fglrx_pci 0000:00:01.0: irq 44 for MSI/MSI-X
[ 52.542279] [fglrx] Firegl kernel thread PID: 3493
[ 52.542711] [fglrx] Firegl kernel thread PID: 3494
[ 52.543243] [fglrx] Firegl kernel thread PID: 3495
[ 52.543448] [fglrx] IRQ 44 Enabled
[ 52.936826] [fglrx] Gart USWC size:1116 M.
[ 52.936838] [fglrx] Gart cacheable size:442 M.
[ 52.936855] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 52.936865] [fglrx] Reserved FB block: Unshared offset:fc81000, size:37f000
[ 52.936875] [fglrx] Reserved FB block: Unshared offset:17ff4000, size:c000
[ 53.536153] usb 3-3: new low-speed USB device number 3 using ohci_hcd
[ 53.704216] usb 3-3: New USB device found, idVendor=1c4f, idProduct=0003
[ 53.704231] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 53.704240] usb 3-3: Product: U+P Mouse
[ 53.704247] usb 3-3: Manufacturer: SIGMACH1P
[ 53.788193] input: SIGMACH1P U+P Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input13
[ 53.789091] generic-usb 0003:1C4F:0003.0001: input,hidraw0: USB HID v1.10 Mouse [SIGMACH1P U+P Mouse] on usb-0000:00:12.0-3/input0
[ 53.789365] usbcore: registered new interface driver usbhid
[ 53.789373] usbhid: USB HID core driver
[ 54.381356] usb 3-3: USB disconnect, device number 3
[ 55.332343] usb 3-3: new low-speed USB device number 4 using ohci_hcd
[ 55.501354] usb 3-3: New USB device found, idVendor=1c4f, idProduct=0003
[ 55.501369] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 55.501378] usb 3-3: Product: U+P Mouse
[ 55.501385] usb 3-3: Manufacturer: SIGMACH1P
[ 55.509121] input: SIGMACH1P U+P Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input14
[ 55.510136] generic-usb 0003:1C4F:0003.0002: input,hidraw0: USB HID v1.10 Mouse [SIGMACH1P U+P Mouse] on usb-0000:00:12.0-3/input0
faramir@faramir-1215b ~ $