Dual boot problem

Questions about Grub, the liveCD and the installer
Forum rules
Before you post please read this

Dual boot problem

Postby Zyzz on Mon Oct 01, 2012 9:21 pm

Hi guys,

recently I have a weird bug. When I start Windows 7 and then restart and boot into Linux Mint it hangs on initializing my USB devices (my mouse). At least I think it hangs there as this is the last thing I read in the bootup process.
A shutdown (pressing power button 3sec+) and new boot solves the problem (pressing the reset button doesn't).
I don't think it's an UP5 problem as I had that problem before too but now it's after every restart before it was less often.
I imagine to see completely different boot messages whether I restart or start from a previous shutdown (font changes, and login screen pops up).

I have a Samsung 830 SSD as as my main hdd. sda1 is system reserved by Win7, sda2 is Win7, sda3 is Linux and sda4 is Linux storage (unused but mounted atm).

Do you have any clues what might be the problem? Do you need any other information? (IDE Controller is set to AHCI instead of IDE.)
Zyzz
Level 1
Level 1
 
Posts: 29
Joined: Wed Aug 01, 2012 5:46 pm

Linux Mint is funded by ads and donations.
 

Re: Dual boot problem

Postby xenopeek on Mon Oct 08, 2012 8:57 am

After a failed boot, have you looked into your /var/log/dmesg or dmesg.0 or syslog file? Might be you get some more errors there.

And stating the obvious, but did you try to repeat this with a different mouse? Just so you stop blaming the poor little thing (or if it is guilty, punish it accordingly).
User avatar
xenopeek
Level 21
Level 21
 
Posts: 14817
Joined: Wed Jul 06, 2011 3:58 am
Location: The Netherlands

Re: Dual boot problem

Postby Zyzz on Sun Oct 14, 2012 9:40 am

Sorry for the late replay. I wasn't on Windows lately anymore and the error didn't happen again until now (could be different as it hung on hda 'stuff').
This time I wasn't booting windows first.
Searching for a 'logviewer' I came up with nothing. Ubuntu had one (searching there gave me gnome-utils which is not in the LMDE repositories.)
Is there a logviewer installed or one you can recommend me?

dmesg
Code: Select all
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-3-amd64 (Debian 3.2.21-3) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Thu Jun 28 09:07:26 UTC 2012
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-3-amd64 root=UUID=dcb1e959-1990-42fc-9048-4bf1856aca9a ro quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[    0.000000]  BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cfa86000 (usable)
[    0.000000]  BIOS-e820: 00000000cfa86000 - 00000000cfb19000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cfb19000 - 00000000cfb1c000 (reserved)
[    0.000000]  BIOS-e820: 00000000cfb1c000 - 00000000cfb1d000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cfb1d000 - 00000000cfb4e000 (reserved)
[    0.000000]  BIOS-e820: 00000000cfb4e000 - 00000000cfb4f000 (usable)
[    0.000000]  BIOS-e820: 00000000cfb4f000 - 00000000cfb56000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cfb56000 - 00000000cfb7d000 (reserved)
[    0.000000]  BIOS-e820: 00000000cfb7d000 - 00000000cfd80000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cfd80000 - 00000000cff00000 (usable)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed61000 - 00000000fed71000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000fef00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100001000 - 0000000230000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.6 present.
[    0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./870 Extreme3 R2.0, BIOS P1.60 10/18/2011
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF write-through
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-EBFFF uncachable
[    0.000000]   EC000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFF0000000 write-back
[    0.000000]   3 base 0000CFF00000 mask FFFFFFF00000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000230000000 aka 8960M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000cff00000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xcff00 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000fcff0] fcff0
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: 0000000000000000-00000000cff00000
[    0.000000]  0000000000 - 00c0000000 page 1G
[    0.000000]  00c0000000 - 00cfe00000 page 2M
[    0.000000]  00cfe00000 - 00cff00000 page 4k
[    0.000000] kernel direct mapping tables up to cff00000 @ 1fffd000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-0000000230000000
[    0.000000]  0100000000 - 0200000000 page 1G
[    0.000000]  0200000000 - 0230000000 page 2M
[    0.000000] kernel direct mapping tables up to 230000000 @ cfefe000-cff00000
[    0.000000] RAMDISK: 367a4000 - 373ca000
[    0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 00000000cfb10068 00054 (v01 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 00000000cfb17778 000F4 (v04 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110623/tbfadt-560)
[    0.000000] ACPI: DSDT 00000000cfb10150 07627 (v02 ALASKA    A M I 00000000 INTL 20051117)
[    0.000000] ACPI: FACS 00000000cfb50f80 00040
[    0.000000] ACPI: APIC 00000000cfb17870 00092 (v03 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 00000000cfb17908 0003C (v01 ALASKA    A M I 01072009 MSFT 00010013)
[    0.000000] ACPI: AAFT 00000000cfb17948 0003A (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000cfb17988 00038 (v01 ALASKA    A M I 01072009 AMI  00000004)
[    0.000000] ACPI: SSDT 00000000cfb179c0 01158 (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000230000000
[    0.000000] Initmem setup node 0 0000000000000000-0000000230000000
[    0.000000]   NODE_DATA [000000022fffb000 - 000000022fffffff]
[    0.000000]  [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880227600000-ffff88022e7fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00230000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[5] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x000cfa86
[    0.000000]     0: 0x000cfb4e -> 0x000cfb4f
[    0.000000]     0: 0x000cfd80 -> 0x000cff00
[    0.000000]     0: 0x00100001 -> 0x00230000
[    0.000000] On node 0 totalpages: 2096019
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3920 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 832575 pages, LIFO batch:31
[    0.000000]   Normal zone: 17024 pages used for memmap
[    0.000000]   Normal zone: 1228159 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000cfa86000 - 00000000cfb19000
[    0.000000] PM: Registered nosave memory: 00000000cfb19000 - 00000000cfb1c000
[    0.000000] PM: Registered nosave memory: 00000000cfb1c000 - 00000000cfb1d000
[    0.000000] PM: Registered nosave memory: 00000000cfb1d000 - 00000000cfb4e000
[    0.000000] PM: Registered nosave memory: 00000000cfb4f000 - 00000000cfb56000
[    0.000000] PM: Registered nosave memory: 00000000cfb56000 - 00000000cfb7d000
[    0.000000] PM: Registered nosave memory: 00000000cfb7d000 - 00000000cfd80000
[    0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
[    0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
[    0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fed00000
[    0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
[    0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed61000
[    0.000000] PM: Registered nosave memory: 00000000fed61000 - 00000000fed71000
[    0.000000] PM: Registered nosave memory: 00000000fed71000 - 00000000fed80000
[    0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
[    0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fef00000
[    0.000000] PM: Registered nosave memory: 00000000fef00000 - 0000000100000000
[    0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100001000
[    0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:2ed00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88022fc00000 s82816 r8192 d23680 u262144
[    0.000000] pcpu-alloc: s82816 r8192 d23680 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2064654
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-3-amd64 root=UUID=dcb1e959-1990-42fc-9048-4bf1856aca9a ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ c4000000 size 32 MB
[    0.000000] Aperture pointing to e820 RAM. Ignoring.
[    0.000000] Your BIOS doesn't leave a aperture memory hole
[    0.000000] Please enable the IOMMU option in the BIOS setup
[    0.000000] This costs you 64 MB of RAM
[    0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[    0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
[    0.000000] Memory: 8113892k/9175040k available (3409k kernel code, 790964k absent, 270184k reserved, 3324k data, 572k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]    RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 3314.104 MHz processor.
[    0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6628.20 BogoMIPS (lpj=13256416)
[    0.004007] pid_max: default: 32768 minimum: 301
[    0.004044] Security Framework initialized
[    0.004048] AppArmor: AppArmor disabled by boot time parameter
[    0.004812] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.009128] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.010022] Mount-cache hash table entries: 256
[    0.010124] Initializing cgroup subsys cpuacct
[    0.010128] Initializing cgroup subsys memory
[    0.010140] Initializing cgroup subsys devices
[    0.010143] Initializing cgroup subsys freezer
[    0.010145] Initializing cgroup subsys net_cls
[    0.010146] Initializing cgroup subsys blkio
[    0.010152] Initializing cgroup subsys perf_event
[    0.010176] tseg: 00cff00000
[    0.010178] CPU: Physical Processor ID: 0
[    0.010179] CPU: Processor Core ID: 0
[    0.010181] mce: CPU supports 7 MCE banks
[    0.010480] ACPI: Core revision 20110623
[    0.016374] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.057041] CPU0: AMD FX(tm)-6100 Six-Core Processor              stepping 02
[    0.060003] Performance Events: AMD Family 15h PMU driver.
[    0.060003] ... version:                0
[    0.060003] ... bit width:              48
[    0.060003] ... generic registers:      6
[    0.060003] ... value mask:             0000ffffffffffff
[    0.060003] ... max period:             00007fffffffffff
[    0.060003] ... fixed-purpose events:   0
[    0.060003] ... event mask:             000000000000003f
[    0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.060003] Booting Node   0, Processors  #1
[    0.060003] smpboot cpu 1: start_ip = 98000
[    0.148032] NMI watchdog enabled, takes one hw-pmu counter.
[    0.148148]  #2
[    0.148150] smpboot cpu 2: start_ip = 98000
[    0.240026] NMI watchdog enabled, takes one hw-pmu counter.
[    0.240106]  #3
[    0.240107] smpboot cpu 3: start_ip = 98000
[    0.332031] NMI watchdog enabled, takes one hw-pmu counter.
[    0.332108]  #4
[    0.332110] smpboot cpu 4: start_ip = 98000
[    0.424036] NMI watchdog enabled, takes one hw-pmu counter.
[    0.424121]  #5
[    0.424122] smpboot cpu 5: start_ip = 98000
[    0.516041] NMI watchdog enabled, takes one hw-pmu counter.
[    0.516056] Brought up 6 CPUs
[    0.516058] Total of 6 processors activated (39772.56 BogoMIPS).
[    0.520189] devtmpfs: initialized
[    0.525319] PM: Registering ACPI NVS region at cfa86000 (602112 bytes)
[    0.525319] PM: Registering ACPI NVS region at cfb1c000 (4096 bytes)
[    0.525319] PM: Registering ACPI NVS region at cfb4f000 (28672 bytes)
[    0.525319] PM: Registering ACPI NVS region at cfb7d000 (2109440 bytes)
[    0.525319] print_constraints: dummy:
[    0.525319] NET: Registered protocol family 16
[    0.525319] Extended Config Space enabled on 1 nodes
[    0.525319] ACPI: bus type pci registered
[    0.525319] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.525319] PCI: not using MMCONFIG
[    0.525319] PCI: Using configuration type 1 for base access
[    0.525319] PCI: Using configuration type 1 for extended access
[    0.525384] bio: create slab <bio-0> at 0
[    0.525384] ACPI: Added _OSI(Module Device)
[    0.525384] ACPI: Added _OSI(Processor Device)
[    0.525384] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.525384] ACPI: Added _OSI(Processor Aggregator Device)
[    0.525384] ACPI: EC: Look up EC in DSDT
[    0.528573] ACPI: Executed 3 blocks of module-level executable AML code
[    0.544535] ACPI: Interpreter enabled
[    0.544544] ACPI: (supports S0 S1 S3 S4 S5)
[    0.544605] ACPI: Using IOAPIC for interrupt routing
[    0.544916] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.545006] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.583445] ACPI: No dock devices found.
[    0.583447] HEST: Table not found.
[    0.583449] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.583572] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.583828] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
[    0.583830] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
[    0.583832] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.583834] pci_root PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff]
[    0.583836] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xffffffff]
[    0.583840] pci_root PNP0A03:00: ignoring host bridge window [mem 0x000c8000-0x000dffff] (conflicts with Video ROM [mem 0x000c0000-0x000cffff])
[    0.583851] pci 0000:00:00.0: [1002:5957] type 0 class 0x000600
[    0.583899] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
[    0.583933] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.583936] pci 0000:00:02.0: PME# disabled
[    0.583956] pci 0000:00:09.0: [1002:597e] type 1 class 0x000604
[    0.583989] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[    0.583991] pci 0000:00:09.0: PME# disabled
[    0.584005] pci 0000:00:0a.0: [1002:597f] type 1 class 0x000604
[    0.584054] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[    0.584057] pci 0000:00:0a.0: PME# disabled
[    0.584082] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[    0.584106] pci 0000:00:11.0: reg 10: [io  0xf090-0xf097]
[    0.584115] pci 0000:00:11.0: reg 14: [io  0xf080-0xf083]
[    0.584124] pci 0000:00:11.0: reg 18: [io  0xf070-0xf077]
[    0.584132] pci 0000:00:11.0: reg 1c: [io  0xf060-0xf063]
[    0.584141] pci 0000:00:11.0: reg 20: [io  0xf050-0xf05f]
[    0.584150] pci 0000:00:11.0: reg 24: [mem 0xfeb0b000-0xfeb0b3ff]
[    0.584206] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[    0.584218] pci 0000:00:12.0: reg 10: [mem 0xfeb0a000-0xfeb0afff]
[    0.584286] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[    0.584303] pci 0000:00:12.2: reg 10: [mem 0xfeb09000-0xfeb090ff]
[    0.584379] pci 0000:00:12.2: supports D1 D2
[    0.584381] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.584384] pci 0000:00:12.2: PME# disabled
[    0.584404] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[    0.584417] pci 0000:00:13.0: reg 10: [mem 0xfeb08000-0xfeb08fff]
[    0.584483] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[    0.584501] pci 0000:00:13.2: reg 10: [mem 0xfeb07000-0xfeb070ff]
[    0.584577] pci 0000:00:13.2: supports D1 D2
[    0.584578] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.584582] pci 0000:00:13.2: PME# disabled
[    0.584602] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[    0.584671] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[    0.584683] pci 0000:00:14.1: reg 10: [io  0xf040-0xf047]
[    0.584692] pci 0000:00:14.1: reg 14: [io  0xf030-0xf033]
[    0.584700] pci 0000:00:14.1: reg 18: [io  0xf020-0xf027]
[    0.584709] pci 0000:00:14.1: reg 1c: [io  0xf010-0xf013]
[    0.584718] pci 0000:00:14.1: reg 20: [io  0xf000-0xf00f]
[    0.584754] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[    0.584773] pci 0000:00:14.2: reg 10: [mem 0xfeb00000-0xfeb03fff 64bit]
[    0.584834] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.584838] pci 0000:00:14.2: PME# disabled
[    0.584851] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[    0.584922] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[    0.584961] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[    0.584973] pci 0000:00:14.5: reg 10: [mem 0xfeb06000-0xfeb06fff]
[    0.585037] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
[    0.585049] pci 0000:00:16.0: reg 10: [mem 0xfeb05000-0xfeb05fff]
[    0.585118] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
[    0.585135] pci 0000:00:16.2: reg 10: [mem 0xfeb04000-0xfeb040ff]
[    0.585212] pci 0000:00:16.2: supports D1 D2
[    0.585213] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[    0.585217] pci 0000:00:16.2: PME# disabled
[    0.585236] pci 0000:00:18.0: [1022:1600] type 0 class 0x000600
[    0.585256] pci 0000:00:18.1: [1022:1601] type 0 class 0x000600
[    0.585271] pci 0000:00:18.2: [1022:1602] type 0 class 0x000600
[    0.585286] pci 0000:00:18.3: [1022:1603] type 0 class 0x000600
[    0.585305] pci 0000:00:18.4: [1022:1604] type 0 class 0x000600
[    0.585320] pci 0000:00:18.5: [1022:1605] type 0 class 0x000600
[    0.585371] pci 0000:01:00.0: [1002:683d] type 0 class 0x000300
[    0.585382] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.585391] pci 0000:01:00.0: reg 18: [mem 0xfea00000-0xfea3ffff 64bit]
[    0.585397] pci 0000:01:00.0: reg 20: [io  0xe000-0xe0ff]
[    0.585408] pci 0000:01:00.0: reg 30: [mem 0xfea40000-0xfea5ffff pref]
[    0.585441] pci 0000:01:00.0: supports D1 D2
[    0.585443] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[    0.585446] pci 0000:01:00.0: PME# disabled
[    0.585468] pci 0000:01:00.1: [1002:aab0] type 0 class 0x000403
[    0.585478] pci 0000:01:00.1: reg 10: [mem 0xfea60000-0xfea63fff 64bit]
[    0.585533] pci 0000:01:00.1: supports D1 D2
[    0.592060] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[    0.592068] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.592077] pci 0000:00:02.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.592084] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.592153] pci 0000:02:00.0: [1b6f:7023] type 0 class 0x000c03
[    0.592174] pci 0000:02:00.0: reg 10: [mem 0xfe900000-0xfe907fff 64bit]
[    0.592263] pci 0000:02:00.0: supports D1 D2
[    0.592267] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.592274] pci 0000:02:00.0: PME# disabled
[    0.600057] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[    0.600066] pci 0000:00:09.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.600139] pci 0000:03:00.0: [1969:1083] type 0 class 0x000200
[    0.600165] pci 0000:03:00.0: reg 10: [mem 0xfe800000-0xfe83ffff 64bit]
[    0.600180] pci 0000:03:00.0: reg 18: [io  0xd000-0xd07f]
[    0.600290] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.600297] pci 0000:03:00.0: PME# disabled
[    0.608060] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[    0.608067] pci 0000:00:0a.0:   bridge window [io  0xd000-0xdfff]
[    0.608073] pci 0000:00:0a.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.608130] pci 0000:04:06.0: [1102:0004] type 0 class 0x000401
[    0.608156] pci 0000:04:06.0: reg 10: [io  0xc000-0xc03f]
[    0.608264] pci 0000:04:06.0: supports D1 D2
[    0.608292] pci 0000:04:06.1: [1102:7003] type 0 class 0x000980
[    0.608316] pci 0000:04:06.1: reg 10: [io  0xc040-0xc047]
[    0.608424] pci 0000:04:06.1: supports D1 D2
[    0.608452] pci 0000:04:06.2: [1102:4001] type 0 class 0x000c00
[    0.608479] pci 0000:04:06.2: reg 10: [mem 0xfe704000-0xfe7047ff]
[    0.608495] pci 0000:04:06.2: reg 14: [mem 0xfe700000-0xfe703fff]
[    0.608598] pci 0000:04:06.2: supports D1 D2
[    0.608602] pci 0000:04:06.2: PME# supported from D0 D1 D2 D3hot
[    0.608609] pci 0000:04:06.2: PME# disabled
[    0.608673] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
[    0.608679] pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff]
[    0.608686] pci 0000:00:14.4:   bridge window [mem 0xfe700000-0xfe7fffff]
[    0.608694] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.608699] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.608704] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.608710] pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
[    0.608734] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.609318] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC02._PRT]
[    0.609407] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC09._PRT]
[    0.609486] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC0A._PRT]
[    0.609593] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[    0.609773]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.609779]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.609782] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.621116] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11 14 15) *0
[    0.621183] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11 14 15) *0
[    0.621253] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11 14 15) *0
[    0.621322] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11 14 15) *0
[    0.621377] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11 14 15) *0
[    0.621418] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11 14 15) *0
[    0.621458] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11 14 15) *0
[    0.621499] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11 14 15) *0
[    0.621579] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.621579] vgaarb: loaded
[    0.621579] vgaarb: bridge control possible 0000:01:00.0
[    0.621579] PCI: Using ACPI for IRQ routing
[    0.629521] PCI: pci_cache_line_size set to 64 bytes
[    0.629609] reserve RAM buffer: 000000000009d800 - 000000000009ffff
[    0.629612] reserve RAM buffer: 00000000cfa86000 - 00000000cfffffff
[    0.629615] reserve RAM buffer: 00000000cfb4f000 - 00000000cfffffff
[    0.629618] reserve RAM buffer: 00000000cff00000 - 00000000cfffffff
[    0.629709] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.629713] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.631752] Switching to clocksource hpet
[    0.631777] pnp: PnP ACPI init
[    0.631777] ACPI: bus type pnp registered
[    0.631777] pnp 00:00: [bus 00-ff]
[    0.631777] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.631777] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.631777] pnp 00:00: [io  0x0d00-0xffff window]
[    0.631777] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.631777] pnp 00:00: [mem 0x000c8000-0x000dffff window]
[    0.631777] pnp 00:00: [mem 0xd0000000-0xffffffff window]
[    0.631777] pnp 00:00: [mem 0x00000000 window]
[    0.631777] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.631777] pnp 00:01: [mem 0xe0000000-0xefffffff]
[    0.631777] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.631777] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.631777] pnp 00:02: [mem 0x00000000-0xffffffffffffffff disabled]
[    0.631777] pnp 00:02: [mem 0x00000000-0xffffffffffffffff disabled]
[    0.631777] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.631777] pnp 00:03: [io  0x040b]
[    0.631777] pnp 00:03: [io  0x04d6]
[    0.631777] pnp 00:03: [io  0x0c00-0x0c01]
[    0.631777] pnp 00:03: [io  0x0c14]
[    0.631777] pnp 00:03: [io  0x0c50-0x0c51]
[    0.631777] pnp 00:03: [io  0x0c52]
[    0.631777] pnp 00:03: [io  0x0c6c]
[    0.631777] pnp 00:03: [io  0x0c6f]
[    0.631777] pnp 00:03: [io  0x0cd0-0x0cd1]
[    0.631777] pnp 00:03: [io  0x0cd2-0x0cd3]
[    0.631777] pnp 00:03: [io  0x0cd4-0x0cd5]
[    0.631777] pnp 00:03: [io  0x0cd6-0x0cd7]
[    0.631777] pnp 00:03: [io  0x0cd8-0x0cdf]
[    0.631777] pnp 00:03: [io  0x0800-0x089f]
[    0.631777] pnp 00:03: [io  0x0000-0xffffffffffffffff disabled]
[    0.631777] pnp 00:03: [io  0x0000-0x000f]
[    0.631777] pnp 00:03: [io  0x0b20-0x0b3f]
[    0.631777] pnp 00:03: [io  0x0900-0x090f]
[    0.631777] pnp 00:03: [io  0x0910-0x091f]
[    0.631777] pnp 00:03: [io  0xfe00-0xfefe]
[    0.631777] pnp 00:03: [io  0x0060-0x005f disabled]
[    0.631777] pnp 00:03: [io  0x0064-0x0063 disabled]
[    0.631777] pnp 00:03: [mem 0xfec00000-0xfec00fff]
[    0.631777] pnp 00:03: [mem 0xfee00000-0xfee00fff]
[    0.631777] pnp 00:03: [mem 0xfed80000-0xfed8ffff]
[    0.631777] pnp 00:03: [mem 0xfed61000-0xfed70fff]
[    0.631777] pnp 00:03: [mem 0xfec10000-0xfec10fff]
[    0.631777] pnp 00:03: [mem 0xfed00000-0xfed00fff]
[    0.631777] pnp 00:03: [mem 0xffc00000-0xffffffff]
[    0.631777] system 00:03: [io  0x040b] has been reserved
[    0.631777] system 00:03: [io  0x04d6] has been reserved
[    0.631777] system 00:03: [io  0x0c00-0x0c01] has been reserved
[    0.631777] system 00:03: [io  0x0c14] has been reserved
[    0.631777] system 00:03: [io  0x0c50-0x0c51] has been reserved
[    0.631777] system 00:03: [io  0x0c52] has been reserved
[    0.631777] system 00:03: [io  0x0c6c] has been reserved
[    0.631777] system 00:03: [io  0x0c6f] has been reserved
[    0.631777] system 00:03: [io  0x0cd0-0x0cd1] has been reserved
[    0.631777] system 00:03: [io  0x0cd2-0x0cd3] has been reserved
[    0.631777] system 00:03: [io  0x0cd4-0x0cd5] has been reserved
[    0.631777] system 00:03: [io  0x0cd6-0x0cd7] has been reserved
[    0.631777] system 00:03: [io  0x0cd8-0x0cdf] has been reserved
[    0.631777] system 00:03: [io  0x0800-0x089f] has been reserved
[    0.631777] system 00:03: [io  0x0b20-0x0b3f] has been reserved
[    0.631777] system 00:03: [io  0x0900-0x090f] has been reserved
[    0.631777] system 00:03: [io  0x0910-0x091f] has been reserved
[    0.631777] system 00:03: [io  0xfe00-0xfefe] has been reserved
[    0.631777] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.631777] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.631777] system 00:03: [mem 0xfed80000-0xfed8ffff] has been reserved
[    0.631777] system 00:03: [mem 0xfed61000-0xfed70fff] has been reserved
[    0.631777] system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.631777] system 00:03: [mem 0xfed00000-0xfed00fff] has been reserved
[    0.631777] system 00:03: [mem 0xffc00000-0xffffffff] has been reserved
[    0.631777] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.631777] pnp 00:04: [io  0x0000-0xffffffffffffffff disabled]
[    0.631777] pnp 00:04: [io  0x0290-0x029f]
[    0.631777] pnp 00:04: [io  0x0000-0xffffffffffffffff disabled]
[    0.631777] system 00:04: [io  0x0290-0x029f] has been reserved
[    0.631777] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.631777] pnp 00:05: [dma 4]
[    0.631777] pnp 00:05: [io  0x0000-0x000f]
[    0.631777] pnp 00:05: [io  0x0081-0x0083]
[    0.631777] pnp 00:05: [io  0x0087]
[    0.631777] pnp 00:05: [io  0x0089-0x008b]
[    0.631777] pnp 00:05: [io  0x008f]
[    0.631777] pnp 00:05: [io  0x00c0-0x00df]
[    0.631777] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.631777] pnp 00:06: [io  0x0070-0x0071]
[    0.631777] pnp 00:06: [irq 8]
[    0.631777] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.631777] pnp 00:07: [io  0x0061]
[    0.631777] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.631777] pnp 00:08: [io  0x0010-0x001f]
[    0.631777] pnp 00:08: [io  0x0022-0x003f]
[    0.631777] pnp 00:08: [io  0x0044-0x005f]
[    0.631777] pnp 00:08: [io  0x0062-0x0063]
[    0.631777] pnp 00:08: [io  0x0065-0x006f]
[    0.631777] pnp 00:08: [io  0x0072-0x007f]
[    0.631777] pnp 00:08: [io  0x0080]
[    0.631777] pnp 00:08: [io  0x0084-0x0086]
[    0.631777] pnp 00:08: [io  0x0088]
[    0.631777] pnp 00:08: [io  0x008c-0x008e]
[    0.631777] pnp 00:08: [io  0x0090-0x009f]
[    0.631777] pnp 00:08: [io  0x00a2-0x00bf]
[    0.631777] pnp 00:08: [io  0x00e0-0x00ef]
[    0.631777] pnp 00:08: [io  0x04d0-0x04d1]
[    0.631777] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.631777] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.631777] pnp 00:09: [io  0x00f0-0x00ff]
[    0.631777] pnp 00:09: [irq 13]
[    0.631777] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.631777] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.631777] pnp 00:0b: [io  0x0060]
[    0.631777] pnp 00:0b: [io  0x0064]
[    0.631777] pnp 00:0b: [irq 1]
[    0.631777] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.631777] pnp 00:0c: [io  0x03f8-0x03ff]
[    0.631777] pnp 00:0c: [irq 4]
[    0.631777] pnp 00:0c: [dma 0 disabled]
[    0.631777] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.631778] pnp 00:0d: [mem 0xfed00000-0xfed003ff]
[    0.631814] pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.631821] pnp: PnP ACPI: found 14 devices
[    0.631823] ACPI: ACPI bus type pnp unregistered
[    0.638811] PCI: max bus depth: 1 pci_try_num: 2
[    0.638828] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[    0.638831] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.638834] pci 0000:00:02.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.638836] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.638840] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[    0.638843] pci 0000:00:09.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.638847] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[    0.638850] pci 0000:00:0a.0:   bridge window [io  0xd000-0xdfff]
[    0.638853] pci 0000:00:0a.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.638857] pci 0000:00:14.4: PCI bridge to [bus 04-04]
[    0.638860] pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff]
[    0.638865] pci 0000:00:14.4:   bridge window [mem 0xfe700000-0xfe7fffff]
[    0.638880] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.638883] pci 0000:00:02.0: setting latency timer to 64
[    0.638890] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.638893] pci 0000:00:09.0: setting latency timer to 64
[    0.638896] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.638899] pci 0000:00:0a.0: setting latency timer to 64
[    0.638905] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.638907] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.638908] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.638910] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xffffffff]
[    0.638912] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.638914] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.638916] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.638918] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.638920] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.638921] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff]
[    0.638923] pci_bus 0000:04: resource 0 [io  0xc000-0xcfff]
[    0.638925] pci_bus 0000:04: resource 1 [mem 0xfe700000-0xfe7fffff]
[    0.638927] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[    0.638928] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
[    0.638930] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    0.638932] pci_bus 0000:04: resource 7 [mem 0xd0000000-0xffffffff]
[    0.639053] NET: Registered protocol family 2
[    0.639314] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.640616] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.642401] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.642610] TCP: Hash tables configured (established 524288 bind 65536)
[    0.642612] TCP reno registered
[    0.642627] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.642669] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.642828] NET: Registered protocol family 1
[    0.642853] pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.460043] pci 0000:00:12.0: PCI INT A disabled
[    1.460061] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.460118] pci 0000:00:12.2: PCI INT B disabled
[    1.460130] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.540045] pci 0000:00:13.0: PCI INT A disabled
[    1.540062] pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.540117] pci 0000:00:13.2: PCI INT B disabled
[    1.540147] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.620047] pci 0000:00:14.5: PCI INT C disabled
[    1.620063] pci 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.700042] pci 0000:00:16.0: PCI INT A disabled
[    1.700059] pci 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.700115] pci 0000:00:16.2: PCI INT B disabled
[    1.700149] pci 0000:01:00.0: Boot video device
[    1.700164] pci 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.700219] pci 0000:02:00.0: PCI INT A disabled
[    1.700240] PCI: CLS 64 bytes, default 64
[    1.700336] Unpacking initramfs...
[    1.973273] Freeing initrd memory: 12440k freed
[    1.976557] PCI-DMA: Disabling AGP.
[    1.976642] PCI-DMA: aperture base @ c4000000 size 65536 KB
[    1.976643] PCI-DMA: using GART IOMMU.
[    1.976646] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.981267] perf: AMD IBS detected (0x000000ff)
[    1.981465] audit: initializing netlink socket (disabled)
[    1.981477] type=2000 audit(1350220671.976:1): initialized
[    2.004001] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    2.026993] VFS: Disk quotas dquot_6.5.2
[    2.027034] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    2.027106] msgmni has been set to 16000
[    2.027303] alg: No test for stdrng (krng)
[    2.027343] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    2.027346] io scheduler noop registered
[    2.027347] io scheduler deadline registered
[    2.027382] io scheduler cfq registered (default)
[    2.027480] pcieport 0000:00:02.0: setting latency timer to 64
[    2.027506] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[    2.027548] pcieport 0000:00:09.0: setting latency timer to 64
[    2.027570] pcieport 0000:00:09.0: irq 41 for MSI/MSI-X
[    2.027607] pcieport 0000:00:0a.0: setting latency timer to 64
[    2.027629] pcieport 0000:00:0a.0: irq 42 for MSI/MSI-X
[    2.027689] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.027711] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.027712] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    2.027977] ERST: Table is not found!
[    2.027978] GHES: HEST is not enabled!
[    2.028053] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.048473] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    2.225019] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    2.260423] Linux agpgart interface v0.103
[    2.260667] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    2.260671] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    2.261201] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.261413] mousedev: PS/2 mouse device common for all mice
[    2.261484] rtc_cmos 00:06: RTC can wake from S4
[    2.261640] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    2.261670] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    2.261690] cpuidle: using governor ladder
[    2.261694] cpuidle: using governor menu
[    2.262087] TCP cubic registered
[    2.262263] NET: Registered protocol family 10
[    2.263263] Mobile IPv6
[    2.263267] NET: Registered protocol family 17
[    2.263275] Registering the dns_resolver key type
[    2.263528] PM: Hibernation image not present or could not be loaded.
[    2.263545] registered taskstats version 1
[    2.282745] rtc_cmos 00:06: setting system clock to 2012-10-14 13:17:53 UTC (1350220673)
[    2.282881] Initializing network drop monitor service
[    2.285299] Freeing unused kernel memory: 572k freed
[    2.285522] Write protecting the kernel read-only data: 6144k
[    2.290804] Freeing unused kernel memory: 668k freed
[    2.296388] Freeing unused kernel memory: 684k freed
[    2.303074] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.365018] udevd[78]: starting version 175
[    2.376982] usbcore: registered new interface driver usbfs
[    2.377003] usbcore: registered new interface driver hub
[    2.377463] atl1c 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.377475] atl1c 0000:03:00.0: setting latency timer to 64
[    2.382125] SCSI subsystem initialized
[    2.384090] usbcore: registered new device driver usb
[    2.384638] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.384670] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    2.384693] ehci_hcd 0000:00:12.2: EHCI Host Controller
[    2.384721] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[    2.384730] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.384758] QUIRK: Enable AMD PLL fix
[    2.384772] ehci_hcd 0000:00:12.2: debug port 1
[    2.384800] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb09000
[    2.395010] libata version 3.00 loaded.
[    2.396057] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    2.396082] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.396085] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.396087] usb usb1: Product: EHCI Host Controller
[    2.396089] usb usb1: Manufacturer: Linux 3.2.0-3-amd64 ehci_hcd
[    2.396091] usb usb1: SerialNumber: 0000:00:12.2
[    2.396298] hub 1-0:1.0: USB hub found
[    2.396302] hub 1-0:1.0: 5 ports detected
[    2.396399] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    2.396425] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    2.396434] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[    2.396441] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.396462] ehci_hcd 0000:00:13.2: debug port 1
[    2.396475] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb07000
[    2.396584] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    2.396603] xhci_hcd 0000:02:00.0: setting latency timer to 64
[    2.396608] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    2.396617] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
[    2.396696] xhci_hcd 0000:02:00.0: irq 17, io mem 0xfe900000
[    2.396708] xhci_hcd 0000:02:00.0: Failed to enable MSI-X
[    2.396786] xhci_hcd 0000:02:00.0: irq 43 for MSI/MSI-X
[    2.396830] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    2.396832] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.396835] usb usb3: Product: xHCI Host Controller
[    2.396837] usb usb3: Manufacturer: Linux 3.2.0-3-amd64 xhci_hcd
[    2.396838] usb usb3: SerialNumber: 0000:02:00.0
[    2.397245] xHCI xhci_add_endpoint called for root hub
[    2.397248] xHCI xhci_check_bandwidth called for root hub
[    2.397280] hub 3-0:1.0: USB hub found
[    2.397286] hub 3-0:1.0: 2 ports detected
[    2.397359] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    2.397365] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4
[    2.397385] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    2.397387] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.397389] usb usb4: Product: xHCI Host Controller
[    2.397391] usb usb4: Manufacturer: Linux 3.2.0-3-amd64 xhci_hcd
[    2.397393] usb usb4: SerialNumber: 0000:02:00.0
[    2.397587] xHCI xhci_add_endpoint called for root hub
[    2.397590] xHCI xhci_check_bandwidth called for root hub
[    2.397620] hub 4-0:1.0: USB hub found
[    2.397627] hub 4-0:1.0: 2 ports detected
[    2.405149] firewire_ohci 0000:04:06.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[    2.408038] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    2.408081] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.408084] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.408087] usb usb2: Product: EHCI Host Controller
[    2.408088] usb usb2: Manufacturer: Linux 3.2.0-3-amd64 ehci_hcd
[    2.408091] usb usb2: SerialNumber: 0000:00:13.2
[    2.408329] hub 2-0:1.0: USB hub found
[    2.408334] hub 2-0:1.0: 5 ports detected
[    2.408564] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    2.408583] ehci_hcd 0000:00:16.2: EHCI Host Controller
[    2.408598] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 5
[    2.408608] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.408639] ehci_hcd 0000:00:16.2: debug port 1
[    2.408654] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfeb04000
[    2.408710] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[    2.412370] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.420115] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    2.420165] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    2.420172] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.420178] usb usb5: Product: EHCI Host Controller
[    2.420245] usb usb5: Manufacturer: Linux 3.2.0-3-amd64 ehci_hcd
[    2.420249] usb usb5: SerialNumber: 0000:00:16.2
[    2.420840] hub 5-0:1.0: USB hub found
[    2.420851] hub 5-0:1.0: 4 ports detected
[    2.421631] pata_atiixp 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    2.422618] scsi0 : pata_atiixp
[    2.422807] scsi1 : pata_atiixp
[    2.423107] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    2.423112] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    2.423219] ahci 0000:00:11.0: version 3.0
[    2.423243] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    2.423378] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[    2.423384] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
[    2.424345] scsi2 : ahci
[    2.424443] scsi3 : ahci
[    2.424547] scsi4 : ahci
[    2.424645] scsi5 : ahci
[    2.424711] ata3: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19
[    2.424715] ata4: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19
[    2.424719] ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19
[    2.424722] ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19
[    2.424750] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.424771] ohci_hcd 0000:00:12.0: OHCI Host Controller
[    2.424786] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 6
[    2.424818] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb0a000
[    2.460132] firewire_ohci: Added fw-ohci device 0000:04:06.2, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[    2.488071] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    2.488078] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.488083] usb usb6: Product: OHCI Host Controller
[    2.488086] usb usb6: Manufacturer: Linux 3.2.0-3-amd64 ohci_hcd
[    2.488089] usb usb6: SerialNumber: 0000:00:12.0
[    2.488309] hub 6-0:1.0: USB hub found
[    2.488319] hub 6-0:1.0: 5 ports detected
[    2.488464] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.488520] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    2.488536] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 7
[    2.488565] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb08000
[    2.509102] atl1c 0000:03:00.0: version 1.0.1.0-NAPI
[    2.548066] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    2.548073] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.548078] usb usb7: Product: OHCI Host Controller
[    2.548081] usb usb7: Manufacturer: Linux 3.2.0-3-amd64 ohci_hcd
[    2.548084] usb usb7: SerialNumber: 0000:00:13.0
[    2.548291] hub 7-0:1.0: USB hub found
[    2.548302] hub 7-0:1.0: 5 ports detected
[    2.548436] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    2.548466] ohci_hcd 0000:00:14.5: OHCI Host Controller
[    2.548480] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 8
[    2.548506] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb06000
[    2.587406] ata1.00: ATAPI: TSSTcorp CDDVDW SH-S223L, SB02, max UDMA/100
[    2.587415] ata1.00: limited to UDMA/33 due to 40-wire cable
[    2.600378] ata1.00: configured for UDMA/33
[    2.601530] scsi 0:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S223L  SB02 PQ: 0 ANSI: 5
[    2.608071] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    2.608078] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.608083] usb usb8: Product: OHCI Host Controller
[    2.608087] usb usb8: Manufacturer: Linux 3.2.0-3-amd64 ohci_hcd
[    2.608090] usb usb8: SerialNumber: 0000:00:14.5
[    2.608299] hub 8-0:1.0: USB hub found
[    2.608309] hub 8-0:1.0: 2 ports detected
[    2.608432] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.608463] ohci_hcd 0000:00:16.0: OHCI Host Controller
[    2.608479] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 9
[    2.608506] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfeb05000
[    2.668127] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[    2.668133] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.668138] usb usb9: Product: OHCI Host Controller
[    2.668141] usb usb9: Manufacturer: Linux 3.2.0-3-amd64 ohci_hcd
[    2.668145] usb usb9: SerialNumber: 0000:00:16.0
[    2.668360] hub 9-0:1.0: USB hub found
[    2.668370] hub 9-0:1.0: 4 ports detected
[    2.916062] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.916095] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.916129] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.916161] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.916622] ata3.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133
[    2.916629] ata3.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.916946] ata5.00: ATA-8: WDC WD1002FBYS-02A6B0, 03.00C06, max UDMA/133
[    2.916952] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.916985] ata3.00: configured for UDMA/133
[    2.917190] scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG SSD 830  CXM0 PQ: 0 ANSI: 5
[    2.917197] ata6.00: ATA-8: Hitachi HDP725050GLA360, GM4OA50E, max UDMA/133
[    2.917204] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.917843] ata5.00: configured for UDMA/133
[    2.918407] ata6.00: configured for UDMA/133
[    2.957452] ata4.00: ATA-7: ST3300620AS, 3.AAE, max UDMA/133
[    2.957457] ata4.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.960185] firewire_core: created device fw0: GUID 00023c01510247ad, S400
[    2.980043] Refined TSC clocksource calibration: 3314.519 MHz.
[    2.980056] Switching to clocksource tsc
[    2.984033] usb 7-1: new full-speed USB device number 2 using ohci_hcd
[    3.015762] ata4.00: configured for UDMA/133
[    3.015908] scsi 3:0:0:0: Direct-Access     ATA      ST3300620AS      3.AA PQ: 0 ANSI: 5
[    3.016347] scsi 4:0:0:0: Direct-Access     ATA      WDC WD1002FBYS-0 03.0 PQ: 0 ANSI: 5
[    3.016703] scsi 5:0:0:0: Direct-Access     ATA      Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
[    3.034915] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.034921] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.035157] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    3.035486] sd 2:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    3.035587] sd 3:0:0:0: [sdb] 586072368 512-byte logical blocks: (300 GB/279 GiB)
[    3.035680] sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    3.035799] sd 3:0:0:0: [sdb] Write Protect is off
[    3.035807] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.035825] sd 2:0:0:0: [sda] Write Protect is off
[    3.035833] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.035839] sd 4:0:0:0: [sdc] Write Protect is off
[    3.035850] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    3.035863] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.035898] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.035937] sd 5:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    3.035957] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.036100] sd 5:0:0:0: [sdd] Write Protect is off
[    3.036108] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    3.036188] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.038084]  sda: sda1 sda2 sda3 sda4
[    3.038833] sd 2:0:0:0: [sda] Attached SCSI disk
[    3.049535]  sdc: sdc3
[    3.050098] sd 4:0:0:0: [sdc] Attached SCSI disk
[    3.053500]  sdd: sdd1
[    3.054005] sd 5:0:0:0: [sdd] Attached SCSI disk
[    3.055454]  sdb: sdb1 sdb2 sdb3
[    3.056219] sd 3:0:0:0: [sdb] Attached SCSI disk
[    3.157127] usb 7-1: New USB device found, idVendor=1532, idProduct=0016
[    3.157134] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.157139] usb 7-1: Product: Razer DeathAdder
[    3.157142] usb 7-1: Manufacturer: Razer
[    3.168261] input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:13.0/usb7/7-1/7-1:1.0/input/input1
[    3.168336] generic-usb 0003:1532:0016.0001: input,hidraw0: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:00:13.0-1/input0
[    3.168353] usbcore: registered new interface driver usbhid
[    3.168355] usbhid: USB HID core driver
[    4.168173] Btrfs loaded
[    4.432776] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    4.884062] udevd[437]: starting version 175
[    4.949974] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    4.949982] ACPI: Power Button [PWRB]
[    4.950043] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    4.950046] ACPI: Power Button [PWRF]
[    4.951321] ACPI: acpi_idle registered with cpuidle
[    4.952404] wmi: Mapper loaded
[    4.978649] ACPI: resource piix4_smbus [io  0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]
[    4.978652] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.979076] EDAC MC: Ver: 2.1.0
[    4.982144] MCE: In-kernel MCE decoding enabled.
[    4.982961] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[    4.983050] SP5100 TCO timer: mmio address 0xbafe00 already in use
[    4.984485] AMD64 EDAC driver v3.4.0
[    4.984539] EDAC amd64: DRAM ECC disabled.
[    4.984547] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[    4.984548]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[    4.984549]  (Note that use of the override may cause unknown side effects.)
[    4.994857] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[    4.994860] Disabling lock debugging due to kernel taint
[    4.997016] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    5.000709] powernow-k8: Found 1 AMD FX(tm)-6100 Six-Core Processor              (6 cpu cores) (version 2.20.00)
[    5.000763] powernow-k8: Core Performance Boosting: on.
[    5.000824] powernow-k8:    0 : pstate 0 (3300 MHz)
[    5.000827] powernow-k8:    1 : pstate 1 (3000 MHz)
[    5.000829] powernow-k8:    2 : pstate 2 (2400 MHz)
[    5.000832] powernow-k8:    3 : pstate 3 (1800 MHz)
[    5.000834] powernow-k8:    4 : pstate 4 (1400 MHz)
[    5.005313] gameport gameport0: EMU10K1 is pci0000:04:06.1/gameport0, io 0xc040, speed 683kHz
[    5.030817] udevd[500]: renamed network interface eth0 to eth1
[    5.033916] [fglrx] Maximum main memory to use for locked dma buffers: 7769 MBytes.
[    5.035115] [fglrx]   vendor: 1002 device: 683d count: 1
[    5.036790] [fglrx] ioport: bar 4, base 0xe000, size: 0x100
[    5.036814] pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    5.036856] pci 0000:01:00.0: setting latency timer to 64
[    5.037134] [fglrx] Kernel PAT support is enabled
[    5.037987] [fglrx] module loaded - fglrx 8.98.2 [Jul 19 2012] with 1 minors
[    5.041223] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    5.047174] snd_emu10k1 0000:04:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    5.053480] Installing spdif_bug patch: SB Audigy 2 ZS [SB0350]
[    5.099254] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[    5.100265] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    5.100378] snd_hda_intel 0000:01:00.1: irq 44 for MSI/MSI-X
[    5.100398] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[    5.624880] Too many HDMI devices
[    5.624884] Too many HDMI devices
[    5.624888] Too many HDMI devices
[    5.624890] Too many HDMI devices
[    5.624893] Too many HDMI devices
[    5.624896] Too many HDMI devices
[    5.624898] Too many HDMI devices
[    5.624900] Too many HDMI devices
[    5.625001] hda-codec: out of range cmd 0:0:fddc:707:0
[    5.625052] hda-codec: out of range cmd 0:0:fddc:708:fddc
[    5.625295] HDMI status: Codec=0 Pin=2 Presence_Detect=0 ELD_Valid=0
[    5.625320] hda-codec: out of range cmd 0:0:e0:f0d:0
[    5.625396] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[    5.625457] HDMI status: Codec=0 Pin=7 Presence_Detect=0 ELD_Valid=0
[    5.625523] HDMI status: Codec=0 Pin=9 Presence_Detect=0 ELD_Valid=0
[    5.625569] hda-codec: out of range cmd 0:0:fddc:f00:c
[    5.625617] hda-codec: out of range cmd 0:0:fddc:709:0
[    5.625664] hda-codec: out of range cmd 0:0:fddc:f09:0
[    5.625712] HDMI status: Codec=0 Pin=64988 Presence_Detect=1 ELD_Valid=1
[    5.625716] hda-codec: out of range cmd 0:0:fddc:f2e:8
[    5.625763] hda-codec: out of range cmd 0:0:fddc:709:0
[    5.625811] hda-codec: out of range cmd 0:0:fddc:f09:0
[    5.625926] HDMI status: Codec=0 Pin=0 Presence_Detect=0 ELD_Valid=0
[    5.626001] HDMI status: Codec=0 Pin=1 Presence_Detect=0 ELD_Valid=0
[    5.626058] hda_codec: cannot build controls for #0 (error -16)
[    5.626106] hda_codec: cannot revert codec
[    5.626590] snd_hda_intel 0000:01:00.1: PCI INT B disabled
[    5.626604] snd_hda_intel: probe of 0000:01:00.1 failed with error -16
[    6.067928] EXT4-fs (sda3): re-mounted. Opts: (null)
[    6.246231] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[    6.268544] device-mapper: uevent: version 1.0.3
[    6.268685] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    6.407459] loop: module loaded
[    6.415344] w83627ehf: Found NCT6775F chip at 0x290
[    6.416097] hwmon_vid: Unknown VRM version of your x86 CPU
[    8.166739] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null)
[    8.181534] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    9.292792] fuse init (API version 7.17)
[   10.893038] Bluetooth: Core ver 2.16
[   10.893068] NET: Registered protocol family 31
[   10.893072] Bluetooth: HCI device and connection manager initialized
[   10.893077] Bluetooth: HCI socket layer initialized
[   10.893080] Bluetooth: L2CAP socket layer initialized
[   10.893088] Bluetooth: SCO socket layer initialized
[   10.897186] Bluetooth: RFCOMM TTY layer initialized


EDIT: Can't paste the end of the log as I'm not allowed to post twice. :(
Zyzz
Level 1
Level 1
 
Posts: 29
Joined: Wed Aug 01, 2012 5:46 pm

Re: Dual boot problem

Postby Zyzz on Sun Oct 14, 2012 9:53 am

Part 2 of the "code" as it exceeded 60k characters. ;)

Can you see anything unusual? Next time I could not reboot but go into a live system and backup the dmesg from there if it was overwritten here.
Thx for your time. :)

Code: Select all
[   10.897196] Bluetooth: RFCOMM socket layer initialized
[   10.897200] Bluetooth: RFCOMM ver 1.11
[   10.918091] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   10.918096] Bluetooth: BNEP filters: protocol multicast
[   10.951566] lp: driver loaded but no devices found
[   10.957210] ppdev: user-space parallel port driver
[   11.722325] atl1c 0000:03:00.0: irq 44 for MSI/MSI-X
[   11.722439] atl1c 0000:03:00.0: atl1c: eth1 NIC Link is Up<100 Mbps Full Duplex>
Zyzz
Level 1
Level 1
 
Posts: 29
Joined: Wed Aug 01, 2012 5:46 pm


Return to Installation & Boot

Who is online

Users browsing this forum: No registered users and 7 guests