Okay, I wanted to install LMDE with everything on a 60GB ssd, with the exception of /tmp, /var, and /home. Those three I wanted on a 500GB hard drive.
However, the installer wouldn't let me do that, so I finally just did the install on the ssd.
So, now what I'd like to do, is move those three directories, /tmp, /var, and /home to the 500 GB hard drive.
I apologize if I've missed where this issue has already been posted.
I'm relatively familiar with the old way of setting up /etc/fstab with drive names like /dev/sda1 etc, but this fstab looks much different, so I'm a bit hesitant to just experiment.
I'm not dual booting. Just LMDE is being installed.
I'm not sure it's relevant in this case, but here is my system info:
System: Host wileycoyote Kernel 3.2.0-3-amd64 x86_64 (64 bit) Distro Linux Mint Debian Edition
CPU: Quad core Intel Core2 Quad Q9450 (-MCP-) cache 6144 KB flags (lm nx sse sse2 sse3 sse4_1 ssse3 vmx) bmips 24429.4
Clock Speeds: (1) 3053.682 MHz (2) 3053.682 MHz (3) 3053.682 MHz (4) 3053.682 MHz
Graphics: Card Advanced Micro Devices [AMD] nee ATI Turks [Radeon HD 6670] X.Org 184.108.40.2062 Res: firstname.lastname@example.org
GLX Renderer AMD Radeon HD 6670 GLX Version 4.2.11762 Compatibility Profile Context Direct Rendering Yes
Audio: Card-1 Intel N10/ICH 7 Family High Definition Audio Controller driver snd_hda_intel BusID: 00:1b.0
Card-2 Advanced Micro Devices [AMD] nee ATI Turks/Whistler HDMI Audio [Radeon HD 6000 Series] driver snd_hda_intel BusID: 01:00.1
Sound: Advanced Linux Sound Architecture Version 1.0.24
Network: Card Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller driver r8169 v: 2.3LK-NAPI at port e800 BusID: 02:00.0
Disks: HDD Total Size: 560.1GB (-) 1: /dev/sdb WDC_WD5000BEKT 500.1GB
2: /dev/sda Corsair_Force_GT 60.0GB
Partition: ID:/ size: 56G used: 7.5G (15%) fs: rootfs ID:/ size: 56G used: 7.5G (15%) fs: ext4
Sensors: System Temperatures: cpu: 36.0C mobo: 32.0C gpu: 34.00C
Fan Speeds (in rpm): cpu: 697 sys-1: 1288
Info: Processes 141 Uptime 7:23 Memory 449.1/8005.7MB Runlevel 2 Client Shell inxi 1.4.23
Thanks in advance for any assistance.
Last edited by rich_jones_1999
on Sun Oct 28, 2012 10:44 am, edited 1 time in total.