LMDE: Logitech headset no sound?

Questions about codecs, DVD playback, web plugins...
Forum rules
Before you post please read this

LMDE: Logitech headset no sound?

Postby DaComboMan on Sat Oct 27, 2012 1:27 pm

Schoelje,

This is where the mystery continues!
Just rebooted with LMDE and sound is coming out just fine.
Of course, Logitech headset is another issue (as i probably have to reboot to see if it'll work or not).
No sound out of headsets for now.
DaComboMan
Level 4
Level 4
 
Posts: 277
Joined: Mon Jan 12, 2009 9:10 pm
Location: AR

Linux Mint is funded by ads and donations.
 

LMDE: Logitech headset no sound?

Postby Schoelje on Sat Oct 27, 2012 4:22 pm

DaComboMan wrote:This is where the mystery continues!
Just rebooted with LMDE and sound is coming out just fine.


I'm lost...I just checked all Alsa and Pulse packages on both LMDE and LMDE KDE and they are identical except for some extra packages in LMDE KDE.
Common packages:
Code: Select all
alsa-base
alsa-utils
gstreamer0.10-alsa
gstreamer0.10-pulseaudio
libao-common
libao4
libasound2
libasound2-plugins
libgsm1
libopenal-data
libopenal1
libpulse-mainloop-glib0
libpulse0
libsdl1.2debian
linux-sound-base
oss-compat
pulseaudio
pulseaudio-esound-compat
pulseaudio-module-gconf
pulseaudio-module-x11
pulseaudio-module-zeroconf
pulseaudio-utils


LMDE KDE specific packages:
Code: Select all
alsa-oss
libcanberra-pulse
pulseaudio-module-bluetooth
timidity


It seems very unlikely that these packages may prevent your hardware from working correctly (but you could try removing them and see what happens after a reboot).

I wish I could help you, but I'm not much of use in this regard.
User avatar
Schoelje
Level 5
Level 5
 
Posts: 791
Joined: Wed Jan 18, 2012 6:25 am
Location: Netherlands

LMDE: Logitech headset no sound?

Postby DaComboMan on Sat Oct 27, 2012 5:12 pm

I'm in the process of re-installing LMDE and will do my best at following your instructions on installing KDE.
Of course, my laptop seems to be some kind of exception to the rules (serious sound issues in the past with LMDE too!).

After reading up here and there to resolve these issues,
i've decided to do a sudo apt-get update first and then
sudo apt-get upgrade (doing at present time).
Then hopefully after this, sound will work (after reboot) for both laptop speakers and logitech headset.

In order not to hog up this thread, i'll p.m. you as situation evolves.
DaComboMan
Level 4
Level 4
 
Posts: 277
Joined: Mon Jan 12, 2009 9:10 pm
Location: AR

LMDE: Logitech headset no sound?

Postby zerozero on Sat Oct 27, 2012 5:56 pm

DaComboMan wrote:i've decided to do a sudo apt-get update first and then
sudo apt-get upgrade (doing at present time).

ohh please don't :shock: if you are going to use the command line with lmde to upgrade it use dist-upgrade always (or use mintupdate)
Image

[ bliss of ignorance ]
zerozero
Level 16
Level 16
 
Posts: 6489
Joined: Tue Jul 07, 2009 2:29 pm

LMDE: Logitech headset no sound?

Postby zerozero on Sat Oct 27, 2012 8:18 pm

DaComboMan wrote:In the mean time, here are specs to my laptop (in case anyone can ever be inspired to find a solution to my "no sound" issue).
https://www.dropbox.com/s/7j0l0odzn07vq ... 20Info.jpg

could you please, within lmde-kde, provide the terminal output of
Code: Select all
lspci -vvnn
Image

[ bliss of ignorance ]
zerozero
Level 16
Level 16
 
Posts: 6489
Joined: Tue Jul 07, 2009 2:29 pm

LMDE: Logitech headset no sound?

Postby DaComboMan on Sun Oct 28, 2012 8:35 am

Here, to answer ZeroZero's request:

lspci -vvnn
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
Subsystem: LG Electronics, Inc. Device [1854:1786]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port [8086:2a41] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: d0000000-d2ffffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
Subsystem: LG Electronics, Inc. Device [1854:1786]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 60e0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
Subsystem: LG Electronics, Inc. Device [1854:1786]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 60c0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
Subsystem: LG Electronics, Inc. Device [1854:1786]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: Memory at d9205c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
Subsystem: LG Electronics, Inc. Device [1854:1786]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at d9200000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: d8100000-d91fffff
Prefetchable memory behind bridge: 00000000d3000000-00000000d3ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: d7100000-d80fffff
Prefetchable memory behind bridge: 00000000d4000000-00000000d4ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00001000-00002fff
Memory behind bridge: d6100000-d70fffff
Prefetchable memory behind bridge: 00000000d5000000-00000000d60fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
Subsystem: LG Electronics, Inc. Device [1854:1786]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 60a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
Subsystem: LG Electronics, Inc. Device [1854:1786]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 6080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
Subsystem: LG Electronics, Inc. Device [1854:1786]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at 6060 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1d.3 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
Subsystem: LG Electronics, Inc. Device [1854:1786]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 6040 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
Subsystem: LG Electronics, Inc. Device [1854:1786]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at d9205800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR+ <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03)
Subsystem: LG Electronics, Inc. Device [1854:1786]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:1f.2 SATA controller [0106]: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: LG Electronics, Inc. Device [1854:1786]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 45
Region 0: I/O ports at 6108 [size=8]
Region 1: I/O ports at 6114 [size=4]
Region 2: I/O ports at 6100 [size=8]
Region 3: I/O ports at 6110 [size=4]
Region 4: I/O ports at 6020 [size=32]
Region 5: Memory at d9205000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
Subsystem: LG Electronics, Inc. Device [1854:1786]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at d9206000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 6000 [size=32]
Kernel driver in use: i801_smbus

00:1f.6 Signal processing controller [1180]: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem [8086:2932] (rev 03)
Subsystem: LG Electronics, Inc. Device [1854:1786]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 11
Region 0: Memory at d9204000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>

01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G96 [GeForce GT 130M] [10de:0652] (rev a1) (prog-if 00 [VGA controller])
Subsystem: LG Electronics, Inc. Device [1854:1786]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d2000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at d0000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at 5000 [size=128]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: nouveau

02:00.0 Network controller [0280]: Ralink corp. RT2790 Wireless 802.11n 1T/2R PCIe [1814:0781]
Subsystem: Quanta Microsystems, Inc Device [1a32:0302]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d8100000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: rt2800pci

05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
Subsystem: LG Electronics, Inc. Device [1854:1786]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: I/O ports at 1000 [size=256]
Region 2: Memory at d5004000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at d5000000 (64-bit, prefetchable) [size=16K]
Expansion ROM at d5010000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: r8169

BTW, still not getting any sound (LMDE KDE) on live DVD. Hopefully above info. will help resolve mystery. :)
DaComboMan
Level 4
Level 4
 
Posts: 277
Joined: Mon Jan 12, 2009 9:10 pm
Location: AR

LMDE: Logitech headset no sound?

Postby zerozero on Sun Oct 28, 2012 9:16 am

im on my way to work :( lets hope somebody else will pick this.
Image

[ bliss of ignorance ]
zerozero
Level 16
Level 16
 
Posts: 6489
Joined: Tue Jul 07, 2009 2:29 pm

LMDE: Logitech headset no sound?

Postby Schoelje on Sun Oct 28, 2012 2:21 pm

zerozero wrote:im on my way to work :( lets hope somebody else will pick this.


Let's see what I can do...
I've been googling for the past hour and found quite some issues with your chip set: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)

It looks a bit like this:
http://forum.linuxmint.com/viewtopic.ph ... &sk=t&sd=a

But it was also mentioned it had to do with the kernel...and LMDE hasn't got the same kernel as LMDE KDE.
LMDE has 3.2.0-2 and LMDE KDE 3.2.0-3
I feel, but can't proove, that this is where we need to look for a solution.
You could try and install the older squeeze kernel and see (or hear) what happens when you reboot.
Run these to find out which ones you can install:
Code: Select all
apt search linux-headers
apt search linux-image

It's probably version 2.6 (stable)
User avatar
Schoelje
Level 5
Level 5
 
Posts: 791
Joined: Wed Jan 18, 2012 6:25 am
Location: Netherlands

LMDE: Logitech headset no sound?

Postby zerozero on Sun Oct 28, 2012 10:13 pm

Schoelje wrote:
zerozero wrote:im on my way to work :( lets hope somebody else will pick this.


Let's see what I can do...
I've been googling for the past hour and found quite some issues with your chip set: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)

It looks a bit like this:
http://forum.linuxmint.com/viewtopic.ph ... &sk=t&sd=a

it would be funny if that solution would give DaComboMan finally sound :D it's the same i use http://www.webupd8.org/2010/11/fix-hda- ... sound.html to fix my "lovely" card
your card seems to be the acl268 and this http://askubuntu.com/questions/43628/no ... 801i-audio is the closest i found dealing with it (from a multitude of others links)

anyway we need some extra info (please)
1- exactly what laptop/desktop you have (brand and model)
2- from within lmde-kde run please
Code: Select all
aplay -l

3- and also
Code: Select all
sudo su

Code: Select all
alsactl init
Image

[ bliss of ignorance ]
zerozero
Level 16
Level 16
 
Posts: 6489
Joined: Tue Jul 07, 2009 2:29 pm

LMDE: Logitech headset no sound?

Postby DaComboMan on Mon Oct 29, 2012 11:32 am

Presently running LMDE only:

aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC272 Analog [ALC272 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0

couldn't get anything for sudo su

alsactl init
Found hardware: "HDA-Intel" "Nvidia MCP77/78 HDMI" "HDA:10ec0272,18541786,00100001 HDA:10de0006,10de0101,00100000" "0x1854" "0x1786"
Hardware is initialized using a generic method
DaComboMan
Level 4
Level 4
 
Posts: 277
Joined: Mon Jan 12, 2009 9:10 pm
Location: AR

LMDE: Logitech headset no sound?

Postby DaComboMan on Mon Oct 29, 2012 11:44 am

At the moment of fresh install proceeded to upgrade (1,225 recommended updates = 1,001 mb).
Accepted the initial request to install recommended entries then skipped the other odd half dozen prompts including the last one for GRUB.
So far, i've still got sound and dual boot is just like before (priority to Windows 7).

As requested, here is data on LMDE:

apt search linux-headers
v linux-headers -
p linux-headers-2.6-486 - Header files for Linux 486 configuration (
p linux-headers-2.6-686-pae - Header files for Linux 686-pae configurati
p linux-headers-2.6-amd64 - Header files for Linux amd64 configuration
i linux-headers-3.2.0-2-486 - Header files for Linux 3.2.0-2-486
i linux-headers-3.2.0-2-common - Common header files for Linux 3.2.0-2
i linux-headers-3.2.0-3-486 - Header files for Linux 3.2.0-3-486
p linux-headers-3.2.0-3-686-pae - Header files for Linux 3.2.0-3-686-pae
p linux-headers-3.2.0-3-all - All header files for Linux 3.2 (meta-packa
p linux-headers-3.2.0-3-all-i386 - All header files for Linux 3.2 (meta-packa
p linux-headers-3.2.0-3-amd64 - Header files for Linux 3.2.0-3-amd64
i linux-headers-3.2.0-3-common - Common header files for Linux 3.2.0-3
p linux-headers-3.2.0-3-common-rt - Common header files for Linux 3.2.0-3-rt
p linux-headers-3.2.0-3-rt-686-pa - Header files for Linux 3.2.0-3-rt-686-pae
i linux-headers-486 - Header files for Linux 486 configuration (
p linux-headers-686-pae - Header files for Linux 686-pae configurati
p linux-headers-amd64 - Header files for Linux amd64 configuration
p linux-headers-rt-686-pae - Header files for Linux rt-686-pae configur

apt search linux-image
v linux-image -
p linux-image-2.6-486 - Linux for older PCs (dummy package)
p linux-image-2.6-686 - Linux for modern PCs (dummy package)
p linux-image-2.6-686-bigmem - Linux for PCs with 4GB+ RAM (dummy package
p linux-image-2.6-686-pae - Linux for modern PCs (dummy package)
p linux-image-2.6-amd64 - Linux for 64-bit PCs (dummy package)
i linux-image-3.2.0-2-486 - Linux 3.2 for older PCs
i linux-image-3.2.0-3-486 - Linux 3.2 for older PCs
p linux-image-3.2.0-3-686-pae - Linux 3.2 for modern PCs
p linux-image-3.2.0-3-686-pae-dbg - Debugging infos for Linux 3.2.0-3-686-pae
p linux-image-3.2.0-3-amd64 - Linux 3.2 for 64-bit PCs
p linux-image-3.2.0-3-rt-686-pae - Linux 3.2 for modern PCs, PREEMPT_RT
p linux-image-3.2.0-3-rt-686-pae- - Debugging infos for Linux 3.2.0-3-rt-686-p
i linux-image-486 - Linux for older PCs (meta-package)
p linux-image-686 - Linux for modern PCs (dummy package)
p linux-image-686-bigmem - Linux for PCs with 4GB+ RAM (dummy package
p linux-image-686-pae - Linux for modern PCs (meta-package)
p linux-image-amd64 - Linux for 64-bit PCs (meta-package)
p linux-image-rt-686-pae - Linux for modern PCs (meta-package), PREEM
DaComboMan
Level 4
Level 4
 
Posts: 277
Joined: Mon Jan 12, 2009 9:10 pm
Location: AR

LMDE: Logitech headset no sound?

Postby Schoelje on Mon Oct 29, 2012 12:10 pm

Okay, now I see that both 3.2.0-2 and 3.2.0-3 are installed.
I presume that you boot from the 3.2.0-3 kernel but to be sure, please check
Code: Select all
uname -r
User avatar
Schoelje
Level 5
Level 5
 
Posts: 791
Joined: Wed Jan 18, 2012 6:25 am
Location: Netherlands

LMDE: Logitech headset no sound?

Postby DaComboMan on Mon Oct 29, 2012 12:41 pm

uname -r
3.2.0-3-486

What's "funny" is the fact that there is a Logitech headset option that appears.
It's just that no sound is flowing out of it.

Still some sound after reboot. Phew!

If you prefer, i can wipe LMDE and install your LMDE KDE for further testing.
DaComboMan
Level 4
Level 4
 
Posts: 277
Joined: Mon Jan 12, 2009 9:10 pm
Location: AR

LMDE: Logitech headset no sound?

Postby Schoelje on Mon Oct 29, 2012 2:14 pm

DaComboMan wrote:If you prefer, i can wipe LMDE and install your LMDE KDE for further testing.


Now my dear Dr. Watson, we need to find the beast that is causing you such grieve...
We are going to fence it in until there's no way left to go!

First, make sure the police force is at full strength:
Code: Select all
sudo apt-get install mintupdate-debian

After that we are going to, strategically, place the fences, thus limiting its space to move so it must, eventually, show its true face:
Code: Select all
sudo apt-get install pulseaudio

Note the changes before you commit them then start your search from there (reboot)

If you still can hear it, you need to place new fences until the beast has stopped howling.
Remember that the last notes you took will, eventually, reveal its hiding place.

Take this old but very experienced hound, he will bring you in the right direction:
Code: Select all
apt search pulse | grep ^i
apt search alsa | grep ^i

Good hunting, my friend!
Sherlock
User avatar
Schoelje
Level 5
Level 5
 
Posts: 791
Joined: Wed Jan 18, 2012 6:25 am
Location: Netherlands

LMDE: Logitech headset no sound?

Postby DaComboMan on Mon Oct 29, 2012 2:26 pm

Check: Debian and Pulse were already updated to latest.

apt search pulse | grep ^i
i gstreamer0.10-pulseaudio - GStreamer plugin for PulseAudio
i libpulse-mainloop-glib0 - PulseAudio client libraries (glib support)
i libpulse0 - PulseAudio client libraries
i pulseaudio - PulseAudio sound server
i pulseaudio-esound-compat - PulseAudio ESD compatibility layer
i pulseaudio-module-gconf - GConf module for PulseAudio sound server
i pulseaudio-module-x11 - X11 module for PulseAudio sound server
i pulseaudio-module-zeroconf - Zeroconf module for PulseAudio sound serve
i pulseaudio-utils - Command line tools for the PulseAudio soun
i vlc-plugin-pulse - PulseAudio plugin for VLC

~ $ apt search alsa | grep ^i
i alsa-base - ALSA driver configuration files
i alsa-utils - Utilities for configuring and using ALSA
i gstreamer0.10-alsa - GStreamer plugin for ALSA

BTW, someone let me view Sherlock Holmes II, it was excellent! Hope to see no.1 soon. :)
DaComboMan
Level 4
Level 4
 
Posts: 277
Joined: Mon Jan 12, 2009 9:10 pm
Location: AR

LMDE: Logitech headset no sound?

Postby Schoelje on Mon Oct 29, 2012 4:02 pm

Not the usual suspects, that is rather disappointing!

Let me ponder (google) on this for a while...

Found your model here:
http://lxr.linux.no/#linux+v3.2.19/Documentation/sound/alsa/HD-Audio-Models.txt
Code: Select all
ALC662/663/272
asus-mode1    ASUS
asus-mode2    ASUS
asus-mode3    ASUS
asus-mode4    ASUS
asus-mode5    ASUS
asus-mode6    ASUS
asus-mode7    ASUS
asus-mode8    ASUS


And here (http://ubuntuforums.org/showpost.php?s=7d877985af65c7fb91c033610d31bfe5&p=7564344&postcount=3) I found the following suggestion:
Code: Select all
sudo echo "options snd-hda-intel model=asus-mode4" >> /etc/modprobe.d/alsa-base.conf
sudo alsa force-reload
User avatar
Schoelje
Level 5
Level 5
 
Posts: 791
Joined: Wed Jan 18, 2012 6:25 am
Location: Netherlands

LMDE: Logitech headset no sound?

Postby DaComboMan on Mon Oct 29, 2012 4:27 pm

Tried the alsa reload bit but that didn't do anything.

What's odd (but always handy) is that the OS responds to the volume controls (not mute though) on the Logitech headset no matter what option i choose.
DaComboMan
Level 4
Level 4
 
Posts: 277
Joined: Mon Jan 12, 2009 9:10 pm
Location: AR

LMDE: Logitech headset no sound?

Postby Schoelje on Mon Oct 29, 2012 4:39 pm

I'm out of ideas...zerozero?
User avatar
Schoelje
Level 5
Level 5
 
Posts: 791
Joined: Wed Jan 18, 2012 6:25 am
Location: Netherlands

LMDE: Logitech headset no sound?

Postby DaComboMan on Mon Oct 29, 2012 4:46 pm

Perhaps my headset is a case in a million.
Who would use a Logitech headset with incorporated volume controls on the wire and uncomfortable synthetic leather earmuffs for listening?
It might be best to leave it to the head honchos to resolve this issue.
You might want to keep working on your definitive LMDE KDE .iso and consider my case "closed" in the mean time.
DaComboMan
Level 4
Level 4
 
Posts: 277
Joined: Mon Jan 12, 2009 9:10 pm
Location: AR

LMDE: Logitech headset no sound?

Postby zerozero on Mon Oct 29, 2012 8:39 pm

DaComboMan wrote:Who would use a Logitech headset
:lol: it looks like some people
PCLOS http://www.pclinuxos.com/forum/index.php?topic=97221.0
debian http://forums.debian.net/viewtopic.php?f=5&t=71264
suse http://www.linuxforums.org/forum/suse-l ... rking.html
still suse http://users.skynet.be/bk329156/info.html
mint http://blog.maestropublishing.com/logit ... ubuntu-min
mandriva http://www.mombu.com/gnu_linux/mandriva ... 38270.html
as far as i can see this kind of headset needs to be configured as a 2nd soundcard but honestly this is a bit over my head :lol: handing over to Schoelje.
Image

[ bliss of ignorance ]
zerozero
Level 16
Level 16
 
Posts: 6489
Joined: Tue Jul 07, 2009 2:29 pm

Linux Mint is funded by ads and donations.
 
Next

Return to Sound, Multimedia & Codecs

Who is online

Users browsing this forum: No registered users and 6 guests