LMDE: Logitech headset no sound?

Questions about codecs, DVD playback, web plugins...
Forum rules
Before you post please read this

LMDE: Logitech headset no sound?

Postby DaComboMan on Mon Oct 29, 2012 8:44 pm

You're funny! :wink:

Yup, i guess there a few Logitech headset users out there after all!

In a certain way, this problematic belongs to LMDE KDE but it should be in a sub-thread of sorts.
DaComboMan
Level 4
Level 4
 
Posts: 277
Joined: Mon Jan 12, 2009 9:10 pm
Location: AR

Linux Mint is funded by ads and donations.
 

LMDE: Logitech headset no sound?

Postby Schoelje on Tue Oct 30, 2012 3:04 am

zerozero wrote: :lol: handing over to Schoelje.


Headache...but the mandriva link had an interesting suggestion

With a bit of change it's worth to try:
Code: Select all
sudo echo "options snd-usb-audio index=0
remove snd-usb-audio { /usr/sbin/alsactl store 0 >/dev/null 2>&1 || : ; }; /sbin/modprobe -r --ignore-remove snd-usb-audio" >> /etc/modprobe.d/alsa-base.conf

You'll need to fiddle with the positioning (start or end of the file) and reboot a lot to check if it's working (do NOT unplug the headset).

Just post alsa-base.conf here, so we can take a look at it.
User avatar
Schoelje
Level 5
Level 5
 
Posts: 791
Joined: Wed Jan 18, 2012 6:25 am
Location: Netherlands

LMDE: Logitech headset no sound?

Postby DaComboMan on Tue Oct 30, 2012 5:41 am

Permission denied.
DaComboMan
Level 4
Level 4
 
Posts: 277
Joined: Mon Jan 12, 2009 9:10 pm
Location: AR

LMDE: Logitech headset no sound?

Postby Schoelje on Tue Oct 30, 2012 5:56 am

Ah, you need to login as su after which you can run the above code.
You can also open your default text editor and paste the code in.
LMDE:
Code: Select all
gksu pluma /etc/modprobe.d/alsa-base.conf

LMDE KDE:
Code: Select all
kdesudo kate /etc/modprobe.d/alsa-base.conf

and paste the code:
Code: Select all
options snd-usb-audio index=0
remove snd-usb-audio { /usr/sbin/alsactl store 0 >/dev/null 2>&1 || : ; }; /sbin/modprobe -r --ignore-remove snd-usb-audio
User avatar
Schoelje
Level 5
Level 5
 
Posts: 791
Joined: Wed Jan 18, 2012 6:25 am
Location: Netherlands

LMDE: Logitech headset no sound?

Postby DaComboMan on Tue Oct 30, 2012 7:46 am

Goccha!

# autoloader aliases
install sound-slot-0 /sbin/modprobe snd-card-0
install sound-slot-1 /sbin/modprobe snd-card-1
install sound-slot-2 /sbin/modprobe snd-card-2
install sound-slot-3 /sbin/modprobe snd-card-3
install sound-slot-4 /sbin/modprobe snd-card-4
install sound-slot-5 /sbin/modprobe snd-card-5
install sound-slot-6 /sbin/modprobe snd-card-6
install sound-slot-7 /sbin/modprobe snd-card-7
# Cause optional modules to be loaded above generic modules
install snd /sbin/modprobe --ignore-install snd && { /sbin/modprobe --quiet snd-ioctl32 ; /sbin/modprobe --quiet snd-seq ; }
install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi && { /sbin/modprobe --quiet snd-seq-midi ; : ; }
install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 && { /sbin/modprobe --quiet snd-emu10k1-synth ; : ; }

# Prevent abnormal drivers from grabbing index 0
options bt87x index=-2
options cx88_alsa index=-2
options snd-atiixp-modem index=-2
options snd-intel8x0m index=-2
options snd-via82xx-modem index=-2
# Keep snd-pcsp from beeing loaded as first soundcard
options snd-pcsp index=-2
# Keep snd-usb-audio from beeing loaded as first soundcard
options snd-usb-audio index=-2
DaComboMan
Level 4
Level 4
 
Posts: 277
Joined: Mon Jan 12, 2009 9:10 pm
Location: AR

LMDE: Logitech headset no sound?

Postby Schoelje on Tue Oct 30, 2012 7:59 am

Gotcha, in the sense of: I found the file, or is it working now?

If not, make your file look like this:
Code: Select all
# autoloader aliases
install sound-slot-0 /sbin/modprobe snd-card-0
install sound-slot-1 /sbin/modprobe snd-card-1
install sound-slot-2 /sbin/modprobe snd-card-2
install sound-slot-3 /sbin/modprobe snd-card-3
install sound-slot-4 /sbin/modprobe snd-card-4
install sound-slot-5 /sbin/modprobe snd-card-5
install sound-slot-6 /sbin/modprobe snd-card-6
install sound-slot-7 /sbin/modprobe snd-card-7
# Cause optional modules to be loaded above generic modules
install snd /sbin/modprobe --ignore-install snd && { /sbin/modprobe --quiet snd-ioctl32 ; /sbin/modprobe --quiet snd-seq ; }
install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi && { /sbin/modprobe --quiet snd-seq-midi ; : ; }
install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 && { /sbin/modprobe --quiet snd-emu10k1-synth ; : ; }

# Prevent abnormal drivers from grabbing index 0
options bt87x index=-2
options cx88_alsa index=-2
options snd-atiixp-modem index=-2
options snd-intel8x0m index=-2
options snd-via82xx-modem index=-2
# Keep snd-pcsp from beeing loaded as first soundcard
options snd-pcsp index=-2
# Keep snd-usb-audio from beeing loaded as first soundcard
#options snd-usb-audio index=-2
options snd-usb-audio index=0
remove snd-usb-audio { /usr/sbin/alsactl store 0 >/dev/null 2>&1 || : ; }; /sbin/modprobe -r --ignore-remove snd-usb-audio

This will make your headset the default soundcard.
If it works, you can change the line
Code: Select all
options snd-usb-audio index=0

to
Code: Select all
options snd-usb-audio index=1

Well, experiment on the index number.
User avatar
Schoelje
Level 5
Level 5
 
Posts: 791
Joined: Wed Jan 18, 2012 6:25 am
Location: Netherlands

LMDE: Logitech headset no sound?

Postby DaComboMan on Tue Oct 30, 2012 8:03 am

Goccha = managed to do "su"
Still no sound.

Need some tutoring to modify whatever file you want me to.
DaComboMan
Level 4
Level 4
 
Posts: 277
Joined: Mon Jan 12, 2009 9:10 pm
Location: AR

LMDE: Logitech headset no sound?

Postby Schoelje on Tue Oct 30, 2012 12:09 pm

DaComboMan wrote:Goccha = managed to do "su"
Still no sound.

Need some tutoring to modify whatever file you want me to.


I'm sorry DaComboMan, now I'm really out of ideas.
Any suggestions I found on the internet were referring to changes in the alsa config file but because I don't have the hardware to test it with It's impossible to debug your issue.
User avatar
Schoelje
Level 5
Level 5
 
Posts: 791
Joined: Wed Jan 18, 2012 6:25 am
Location: Netherlands

LMDE: Logitech headset no sound?

Postby DaComboMan on Tue Oct 30, 2012 12:43 pm

Can't say we didn't try!

Thank you Shoelje and ZeroZero too!

Have posted on other forums so if a solution comes about,
i'll drop you a line.
DaComboMan
Level 4
Level 4
 
Posts: 277
Joined: Mon Jan 12, 2009 9:10 pm
Location: AR

Re: LMDE: Logitech headset no sound?

Postby zerozero on Tue Oct 30, 2012 4:15 pm

[splitted from viewtopic.php?f=61&t=113571&p=643170#p643170 into its own topic, let's hope this way we get more help solving this]
Image

[ bliss of ignorance ]
zerozero
Level 16
Level 16
 
Posts: 6484
Joined: Tue Jul 07, 2009 2:29 pm

Re: LMDE: Logitech headset no sound?

Postby DaComboMan on Tue Oct 30, 2012 7:37 pm

Not sure if Shoelje understood me correctly.

He wanted me to make it look like this. Just how can i do that?

# autoloader aliases
install sound-slot-0 /sbin/modprobe snd-card-0
install sound-slot-1 /sbin/modprobe snd-card-1
install sound-slot-2 /sbin/modprobe snd-card-2
install sound-slot-3 /sbin/modprobe snd-card-3
install sound-slot-4 /sbin/modprobe snd-card-4
install sound-slot-5 /sbin/modprobe snd-card-5
install sound-slot-6 /sbin/modprobe snd-card-6
install sound-slot-7 /sbin/modprobe snd-card-7
# Cause optional modules to be loaded above generic modules
install snd /sbin/modprobe --ignore-install snd && { /sbin/modprobe --quiet snd-ioctl32 ; /sbin/modprobe --quiet snd-seq ; }
install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi && { /sbin/modprobe --quiet snd-seq-midi ; : ; }
install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 && { /sbin/modprobe --quiet snd-emu10k1-synth ; : ; }

# Prevent abnormal drivers from grabbing index 0
options bt87x index=-2
options cx88_alsa index=-2
options snd-atiixp-modem index=-2
options snd-intel8x0m index=-2
options snd-via82xx-modem index=-2
# Keep snd-pcsp from beeing loaded as first soundcard
options snd-pcsp index=-2
# Keep snd-usb-audio from beeing loaded as first soundcard
#options snd-usb-audio index=-2
options snd-usb-audio index=0
remove snd-usb-audio { /usr/sbin/alsactl store 0 >/dev/null 2>&1 || : ; }; /sbin/modprobe -r --ignore-remove snd-usb-audio
DaComboMan
Level 4
Level 4
 
Posts: 277
Joined: Mon Jan 12, 2009 9:10 pm
Location: AR

Re: LMDE: Logitech headset no sound?

Postby Schoelje on Wed Oct 31, 2012 4:23 am

Just open the file as described in my message above: viewtopic.php?p=643028#p643028
Then copy/paste the code and save the file as in the other message above: viewtopic.php?p=643053#p643053
User avatar
Schoelje
Level 5
Level 5
 
Posts: 791
Joined: Wed Jan 18, 2012 6:25 am
Location: Netherlands

Re: LMDE: Logitech headset no sound?

Postby DaComboMan on Wed Oct 31, 2012 5:53 am

This is strange. Don't recall seeing this:

~ $ su
# gksu pluma /etc/modprobe.d/alsa-base.conf

(gksu:3236): GConf-WARNING **: Client failed to connect to the D-BUS daemon:
Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
GConf Error: No D-BUS daemon running


(gksu:3236): GConf-WARNING **: Client failed to connect to the D-BUS daemon:
Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
GConf Error: No D-BUS daemon running


(gksu:3236): GConf-WARNING **: Client failed to connect to the D-BUS daemon:
Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
GConf Error: No D-BUS daemon running


(pluma:3237): EggSMClient-WARNING **: Failed to connect to the session manager: None of the authentication protocols specified are supported

MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)

(pluma:3237): GVFS-RemoteVolumeMonitor-WARNING **: cannot connect to the session bus: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)

(pluma:3237): Gtk-WARNING **: Attempting to store changes into `/root/.local/share/recently-used.xbel', but failed: Failed to create file '/root/.local/share/recently-used.xbel.EBT4MW': No such file or directory

(pluma:3237): Gtk-WARNING **: Attempting to set the permissions of `/root/.local/share/recently-used.xbel', but failed: No such file or directory
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)

(pluma:3237): Gtk-WARNING **: Attempting to store changes into `/root/.local/share/recently-used.xbel', but failed: Failed to create file '/root/.local/share/recently-used.xbel.VIKDNW': No such file or directory

(pluma:3237): Gtk-WARNING **: Attempting to set the permissions of `/root/.local/share/recently-used.xbel', but failed: No such file or directory
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)

(pluma:3237): Gtk-WARNING **: Attempting to store changes into `/root/.local/share/recently-used.xbel', but failed: Failed to create file '/root/.local/share/recently-used.xbel.QKI7MW': No such file or directory

(pluma:3237): Gtk-WARNING **: Attempting to set the permissions of `/root/.local/share/recently-used.xbel', but failed: No such file or directory
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)

(pluma:3237): Gtk-WARNING **: Attempting to store changes into `/root/.local/share/recently-used.xbel', but failed: Failed to create file '/root/.local/share/recently-used.xbel.84NHNW': No such file or directory

(pluma:3237): Gtk-WARNING **: Attempting to set the permissions of `/root/.local/share/recently-used.xbel', but failed: No such file or directory
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
MateConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for MateCORBA, or you have stale NFS locks due to a system crash. See http://wiki.mate-desktop.org/docs:mate-conf for information. (Details - 1: Failed to get connection to session: The connection is closed)
^C
DaComboMan
Level 4
Level 4
 
Posts: 277
Joined: Mon Jan 12, 2009 9:10 pm
Location: AR

Re: LMDE: Logitech headset no sound?

Postby Schoelje on Wed Oct 31, 2012 7:07 am

gksu is the frontend for su (as far as I know) so you don't need to login as su.
Impressive messages though, but didn't pluma start just the same (mine did after login as su and gksu pluma)?
User avatar
Schoelje
Level 5
Level 5
 
Posts: 791
Joined: Wed Jan 18, 2012 6:25 am
Location: Netherlands

Re: LMDE: Logitech headset no sound?

Postby DaComboMan on Wed Oct 31, 2012 8:32 am

Me make booboo!

After reboot, i don't have any Logitech headset options at all (even sound control from usb device no longer works).
DaComboMan
Level 4
Level 4
 
Posts: 277
Joined: Mon Jan 12, 2009 9:10 pm
Location: AR

Re: LMDE: Logitech headset no sound?

Postby Schoelje on Wed Oct 31, 2012 8:49 am

DaComboMan wrote:Me make booboo!

After reboot, i don't have any Logitech headset options at all (even sound control from usb device no longer works).


I'm sorry, but then you need to revert the config file to its original state as in your own message here: viewtopic.php?p=643049#p643049
User avatar
Schoelje
Level 5
Level 5
 
Posts: 791
Joined: Wed Jan 18, 2012 6:25 am
Location: Netherlands

Re: LMDE: Logitech headset no sound?

Postby DaComboMan on Wed Oct 31, 2012 11:15 am

Okay. So, i guess we're back to square one.
DaComboMan
Level 4
Level 4
 
Posts: 277
Joined: Mon Jan 12, 2009 9:10 pm
Location: AR

Re: LMDE: Logitech headset no sound?

Postby Schoelje on Wed Oct 31, 2012 11:44 am

DaComboMan wrote:Okay. So, i guess we're back to square one.


...for the third time... :cry:
User avatar
Schoelje
Level 5
Level 5
 
Posts: 791
Joined: Wed Jan 18, 2012 6:25 am
Location: Netherlands

Re: LMDE: Logitech headset no sound?

Postby DaComboMan on Wed Oct 31, 2012 1:48 pm

Some Americans might say, "strike three, you're out!"

When reviewing Google's latest adventure (Chrome Remote Desktop) and its possibilities, wonder if that could help?
https://chrome.google.com/webstore/deta ... ihenigjmpp
DaComboMan
Level 4
Level 4
 
Posts: 277
Joined: Mon Jan 12, 2009 9:10 pm
Location: AR

Re: LMDE: Logitech headset no sound?

Postby Schoelje on Wed Oct 31, 2012 2:06 pm

DaComboMan wrote:When reviewing Google's latest adventure (Chrome Remote Desktop) and its possibilities, wonder if that could help?
https://chrome.google.com/webstore/deta ... ihenigjmpp


To do what?
User avatar
Schoelje
Level 5
Level 5
 
Posts: 791
Joined: Wed Jan 18, 2012 6:25 am
Location: Netherlands

Linux Mint is funded by ads and donations.
 
PreviousNext

Return to Sound, Multimedia & Codecs

Who is online

Users browsing this forum: No registered users and 3 guests