Broadcom STA Driver not working.
Forum rules
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Broadcom STA Driver not working.
Hello all! I am very new to linux, and this was my first install of it. I am sorry if I am not able to provide adequate details on this subject, as I said, I am a noob to the whole Linux thing. When I go to install Broadcom STA Driver from additional drivers a pop up apears saying,
"Sorry, installation of this driver failed. Please have a look at the log file for details: /var/log/jockey.log"
I do not know what this means and I do not know how to begin fixing it. If it helps I have a old poopy Dell XPS M1330 Red.
Many thanks to all that help
-sig552man-
"Sorry, installation of this driver failed. Please have a look at the log file for details: /var/log/jockey.log"
I do not know what this means and I do not know how to begin fixing it. If it helps I have a old poopy Dell XPS M1330 Red.
Many thanks to all that help
-sig552man-
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 1 time in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Re: Broadcom STA Driver not working.
Open a terminal and post the result of this:
Code: Select all
lspci -nnk | grep -iA2 net
Linux Mint 21.1 Cinnamon
Re: Broadcom STA Driver not working.
Alright, here are the results.
09:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express [14e4:1713] (rev 02)
Subsystem: Dell XPS M1330 [1028:0209]
Kernel driver in use: tg3
--
0c:00.0 Network controller [0280]: Broadcom Corporation BCM4321 802.11a/b/g/n [14e4:4328] (rev 03)
Subsystem: Dell Wireless 1500 Draft 802.11n WLAN Mini-card [1028:000a]
Kernel modules: ssb
09:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express [14e4:1713] (rev 02)
Subsystem: Dell XPS M1330 [1028:0209]
Kernel driver in use: tg3
--
0c:00.0 Network controller [0280]: Broadcom Corporation BCM4321 802.11a/b/g/n [14e4:4328] (rev 03)
Subsystem: Dell Wireless 1500 Draft 802.11n WLAN Mini-card [1028:000a]
Kernel modules: ssb
Re: Broadcom STA Driver not working.
Your device would be better with the driver you were trying to install. So lets see the log
Make sure the terminal setting is unlimited scrollback
If necessary use a pastebin
FYI: It's wise if you can get your system completely updated before installing this driver
Make sure the terminal setting is unlimited scrollback
Code: Select all
cat /var/log/jockey.log
FYI: It's wise if you can get your system completely updated before installing this driver
Linux Mint 21.1 Cinnamon
Re: Broadcom STA Driver not working.
Alright I updated everything. But I feel like such a noob, what is a pastebin exactly?
Re: Broadcom STA Driver not working.
http://pastebin.com/
I wasn't sure how long the output would be so I gave that as an option if it was massive
It's probably not.
You can use your file manager to go to /var/log
Find the file: jockey.log
paste the content here in code tags
I wasn't sure how long the output would be so I gave that as an option if it was massive
It's probably not.
You can use your file manager to go to /var/log
Find the file: jockey.log
paste the content here in code tags
Linux Mint 21.1 Cinnamon
Re: Broadcom STA Driver not working.
Alright, I belive this is it. Here is the pastebin link http://pastebin.com/s9RBCcpP
Re: Broadcom STA Driver not working.
Linux Mint 21.1 Cinnamon
Re: Broadcom STA Driver not working.
I installed it, and I believe it all went acording to plan, no error messages showed up, Where should I go from here?
EDIT: Nevermind, I see that fixed my problem. Plus one to you good sir. Many thanks.
EDIT: Nevermind, I see that fixed my problem. Plus one to you good sir. Many thanks.
Re: Broadcom STA Driver not working.
Actually, I am having problems now getting wireless to connect. I do go about it through the Network application correct? When I do it just does not seem to do anything. Help would be appreciated or maybe a link to a guide of some sort, google results pull up nothing. Many thanks again!
Re: Broadcom STA Driver not working.
Does the additional drivers section register it as installed?sig552man wrote:Actually, I am having problems now getting wireless to connect. I do go about it through the Network application correct? When I do it just does not seem to do anything. Help would be appreciated or maybe a link to a guide of some sort, google results pull up nothing. Many thanks again!
Linux Mint 21.1 Cinnamon
Re: Broadcom STA Driver not working.
I'm not too sure then..sig552man wrote:It does and it also states it is in use.
You could do with a networking guru, and I'm not one.
I can tell you though, that your device doesn't look the best in the list here: http://wireless.kernel.org/en/users/Drivers/b43
The b43 driver is only partial, but your not using b43 for that reason, which is why we worked on 'wl'
You are correct in that you should make your connections in the network manager.
I'm wondering about your connection anyway, because remember you had trouble installing the driver and your log showed you were having trouble fetching a package, which I pointed you to
So, in short. I'm not sure.
If it were me, I'd probably try b43. But you may find it tricky switching between the two.
Linux Mint 21.1 Cinnamon
Re: Broadcom STA Driver not working.
Alright! Thank you I will check that out and see how it goes! Many thanks again!
Re: Broadcom STA Driver not working.
What you could do is, uninstall the driver you have.
Download this and extract the folder b43
https://dl.dropbox.com/u/10573557/b43_firmware/b43.zip
place the folder for now in your /home/username*
Now examine your dir: /lib/firmware
If there is already a folder b43, you need to rename it with:
Now move the b43 folder you extracted from my .zip
So open a terminal and do
That's it
Download this and extract the folder b43
https://dl.dropbox.com/u/10573557/b43_firmware/b43.zip
place the folder for now in your /home/username*
Now examine your dir: /lib/firmware
If there is already a folder b43, you need to rename it with:
Code: Select all
cd /lib/firmware
Code: Select all
sudo mv b43 old-b43
So open a terminal and do
Code: Select all
sudo mv b43 /lib/firmware
Linux Mint 21.1 Cinnamon
Re: Broadcom STA Driver not working.
Before I switch on over, I should have been more detailed on what my problem was, just in case I am missing something painfully obvious. In Network Connections I inputted my information, security key, and such. On the taskbar I will select the Icon, it will connect to my network, It shows its signal strength, but when I go to actually pull up a webpage, it acts like I am not connected at all. Checking my wireless card driver, it does say installed and in use. Is this due to the driver as you pointed out, or something else?
Re: Broadcom STA Driver not working.
OKsig552man wrote:Before I switch on over, I should have been more detailed on what my problem was, just in case I am missing something painfully obvious. In Network Connections I inputted my information, security key, and such. On the taskbar I will select the Icon, it will connect to my network, It shows its signal strength, but when I go to actually pull up a webpage, it acts like I am not connected at all. Checking my wireless card driver, it does say installed and in use. Is this due to the driver as you pointed out, or something else?
So can you login to your router with that wireless connection?
Linux Mint 21.1 Cinnamon
Re: Broadcom STA Driver not working.
I am unable to connect to my router with that connection.
Re: Broadcom STA Driver not working.
Does the system let you re-install that driver?
Personally I'd try the switch I mentioned earlier.
Be prepared to spend a few bucks for a USB dongle if this doesn't work
Personally I'd try the switch I mentioned earlier.
Be prepared to spend a few bucks for a USB dongle if this doesn't work
Linux Mint 21.1 Cinnamon