Okay guys, I'm personally running Fedora 17 with an Nvidia card and resolutions issues are a no-brainer here, however I've installed Mint 14 (Mate) on my friend's older Dell machine, onboard Intel graphics and his max resolution is 1024x768 which results in squashed heads/bodies when watching HULU and some problems with seeing online banking figures. It seems that the proper resolution for him would be 1366x768 and his TV specs show 60hz as a good refresh rate.
Now, I haven't played in /etc/X11/xorg.conf for several years and I haven't used VI in about that same amount of time and ...it is my friend's machine, so I don't want to end up with a black screen when I'm done 'helping' him. In short, can someone give me an assist by confirming that we're still modifying /etc/X11/xorg.conf and what should be added under MONITOR to increase the resolution? VI is a last-resort option, but is there a built-in text editor similar to gedit that comes with Mate?
Intel Graphics, Mint 14 (MATE), 32" LCD TV Monitor. [SOLVED]
Forum rules
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Intel Graphics, Mint 14 (MATE), 32" LCD TV Monitor. [SOLVED]
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 2 times in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Re: Intel Graphics, Mint 14 (MATE), 32" LCD TV Monitor.
I believe you can set resolutions with xrandr instead of the xorg.conf. Also, Mint has gedit included. You could also use nano for quick edits. I find it easier to use than VI.
Also, how much older is it? P3 era? 1024x768 could be the max resolution for that chipset.
Also, how much older is it? P3 era? 1024x768 could be the max resolution for that chipset.
Re: Intel Graphics, Mint 14 (MATE), 32" LCD TV Monitor.
Thanks for the quick response.
It's a P4, maybe 4 years old? Here's the last time I had this issue with his machine/TV: http://forums.linuxmint.com/viewtopic.php?f=49&t=39383 and at least we're now at 1024x768 instead of 800x600, which is somewhat of an improvement! Tried to fire up gedit and it's apparently not included in the default install on Mate, but yeah, that's a heckuva lot easier than VI, so I'll install it.
Time moves on, many things change, so that's the reason for my question on what's the current method of adding additional resolutions.
It's a P4, maybe 4 years old? Here's the last time I had this issue with his machine/TV: http://forums.linuxmint.com/viewtopic.php?f=49&t=39383 and at least we're now at 1024x768 instead of 800x600, which is somewhat of an improvement! Tried to fire up gedit and it's apparently not included in the default install on Mate, but yeah, that's a heckuva lot easier than VI, so I'll install it.
Time moves on, many things change, so that's the reason for my question on what's the current method of adding additional resolutions.
Re: Intel Graphics, Mint 14 (MATE), 32" LCD TV Monitor.
nano is inculded by default. It's still much easier than VI.
Re: Intel Graphics, Mint 14 (MATE), 32" LCD TV Monitor.
Partial success! (partial 'yeehaw'): I've used xrandr to create the following:
which does change the resolution to correct values and all looks normal for that one login. So, time to make a start-up script, right?
Which I've chmod'd and added to the start-up scripts and....nope, doesn't work because once I've rebooted, the xrandr values have reverted. So, what's the final step that I should be following here? Second script? Modify this one, adding the top two xrandr lines? Appreciate the help.
Code: Select all
xrandr --newmode 1366x768 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync
xrandr --addmode VGA1 1366x768
xrandr --output VGA1 --mode 1366x768
Code: Select all
#!/bin/sh
xrandr --output VGA1 --primary --mode 1366x768
Re: Intel Graphics, Mint 14 (MATE), 32" LCD TV Monitor.
Try this:
I used the 'which' command to find the path to the executable. I've had issues with just using simple commands in my shell scripts.
Are the different resolutions still shown? If they aren't then you could just turn your code into a shell script.
Code: Select all
#!/bin/sh
/usr/bin/xrandr --output VGA1 --primary --mode 1366x768
Are the different resolutions still shown? If they aren't then you could just turn your code into a shell script.
Re: Intel Graphics, Mint 14 (MATE), 32" LCD TV Monitor.
Okay, a new day and JOY!!!
Turns out that just modifying the .sh script to this:
boots the correct resolution. The path was already set in the control panel when the script was added, so it was the missing top two lines that was the problem.
Thanks to all...back to Fedora... Nah, gotta dual-boot myself now with F-18 and Mint. Great distro.
Turns out that just modifying the .sh script to this:
Code: Select all
#!/bin/sh
xrandr --newmode 1366x768 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync
xrandr --addmode VGA1 1366x768
xrandr --output VGA1 --mode 1366x768
Thanks to all...back to Fedora... Nah, gotta dual-boot myself now with F-18 and Mint. Great distro.
Re: Intel Graphics, Mint 14 (MATE), 32" LCD TV Monitor. [SOL
It really is. And you don't have to deal with RPM either.
Glad you got it working.
Glad you got it working.