Here is a collection of things i did on my hp ProBook 4330s to get things working properly.
Hopefully u can use the same fixes on the other ProBooks aswel.
- Go to http://www.ralinktech.com/support.php?s=2 http://www.ralinktech.com/en/04_supp...se.php?sn=5019 and download the RT3062PCI/mPCI/CB/PCIe(RT3060/RT3062/RT3562/RT3592) drivers.
Extract the package and cd to the directory.
U need to make a slight modification to the configuration for the driver:
# Support Wpa_Supplicant
# Support Native WpaSupplicant for Network Manager
By default they are both set to ‘n’. Save and close the file.
From the top level directory, compile and install the driver:
make && make install
- After compilation, and while still root, modprobe the driver:
You should get no output signalling success.
- Now an important step. We need to blacklist a conflicting driver that will be loaded preferentially for this network card.
sudo vim /etc/modprobe.d/blacklist.conf
enter the following line at the bottom of the file:
Save and close. ( :wq! )
- Now wireless was working but with alot of messages in my dmesg so i had to deactivate logging.
sudo iwpriv ra0 set Debug=0
still i was getting error messages in my log file about evbug
so if u get them to, go back to the blacklist.conf and add this line at the bottom.
hope this helped