Toshiba NB205 long boot time

All Gurus once were Newbies
Forum rules
There are no such things as "stupid" questions. However if you think your question is a bit stupid, then this is the right place for you to post it. Please stick to easy to-the-point questions that you feel people can answer fast. For long and complicated questions prefer the other forums within the support section.
Before you post please read this

Toshiba NB205 long boot time

Postby Trio3b on Wed Dec 26, 2012 3:43 am

LM 13 xfce on Toshiba NB205 2gb RAM

Boot time is very long. Any services I can disable to reduce boot. ( about 2 min)?

Thanks
Trio3b
Level 1
Level 1
 
Posts: 28
Joined: Tue Apr 17, 2012 12:18 am

Linux Mint is funded by ads and donations.
 

Re: Toshiba NB205 long boot time

Postby lahirdenganselamat on Wed Dec 26, 2012 6:55 am

2 min for xfce sure is weird, post your dmesg result here (or your syslog)
ASUS 1215B AMD E-350 with Linux Mint 15 KDE, Precise Puppy, and Saluki
User avatar
lahirdenganselamat
Level 4
Level 4
 
Posts: 437
Joined: Mon Oct 17, 2011 10:30 pm
Location: Yogyakarta

Re: Toshiba NB205 long boot time

Postby Trio3b on Wed Dec 26, 2012 6:42 pm

LM 13 xfce installed via unetbootin on SD card on this netbook Toshiba NB205 2gb RAM. I thought that was a long time too. Otherwise all seems ok although this is a new install.

dmesg returns:

Code: Select all
[    0.335800] pnp 00:05: [io  0x0068]
[    0.335807] pnp 00:05: [io  0x006c]
[    0.335814] pnp 00:05: [io  0x0070]
[    0.335821] pnp 00:05: [io  0x0080]
[    0.335827] pnp 00:05: [io  0x0092]
[    0.335835] pnp 00:05: [io  0x00b2-0x00b3]
[    0.335842] pnp 00:05: [io  0x0800-0x080f]
[    0.335850] pnp 00:05: [io  0x1000-0x107f]
[    0.335857] pnp 00:05: [io  0x1180-0x11bf]
[    0.335864] pnp 00:05: [io  0xfe00]
[    0.335872] pnp 00:05: [io  0xff2c-0xff7f]
[    0.336136] system 00:05: [io  0x0800-0x080f] has been reserved
[    0.336147] system 00:05: [io  0x1000-0x107f] has been reserved
[    0.336157] system 00:05: [io  0x1180-0x11bf] has been reserved
[    0.336167] system 00:05: [io  0xfe00] has been reserved
[    0.336177] system 00:05: [io  0xff2c-0xff7f] has been reserved
[    0.336188] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.336226] pnp 00:06: [io  0x0070-0x0077]
[    0.336245] pnp 00:06: [irq 8]
[    0.336373] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.356177] pnp 00:07: [io  0x0060]
[    0.356188] pnp 00:07: [io  0x0064]
[    0.356215] pnp 00:07: [irq 1]
[    0.356395] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.356441] pnp 00:08: [irq 12]
[    0.356592] pnp 00:08: Plug and Play ACPI device, IDs AUI0311 SYN0700 SYN0002 PNP0f13 (active)
[    0.356704] pnp: PnP ACPI: found 9 devices
[    0.356711] ACPI: ACPI bus type pnp unregistered
[    0.356719] PnPBIOS: Disabled by ACPI PNP
[    0.399074] PCI: max bus depth: 1 pci_try_num: 2
[    0.399174] pci 0000:00:1c.2: BAR 14: assigned [mem 0x80000000-0x800fffff]
[    0.399188] pci 0000:00:1c.3: BAR 14: assigned [mem 0x80100000-0x802fffff]
[    0.399202] pci 0000:00:1c.3: BAR 15: assigned [mem 0x80300000-0x804fffff 64bit pref]
[    0.399216] pci 0000:00:1c.3: BAR 13: assigned [io  0x3000-0x3fff]
[    0.399230] pci 0000:00:1c.2: BAR 14: assigned [mem 0x80500000-0x809fffff]
[    0.399243] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80a00000-0x80bfffff 64bit pref]
[    0.399257] pci 0000:00:1c.1: BAR 13: assigned [io  0x4000-0x4fff]
[    0.399269] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80c00000-0x80dfffff]
[    0.399282] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80e00000-0x80ffffff 64bit pref]
[    0.399296] pci 0000:00:1c.0: BAR 13: assigned [io  0x5000-0x5fff]
[    0.399305] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.399316] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.399330] pci 0000:00:1c.0:   bridge window [mem 0x80c00000-0x80dfffff]
[    0.399343] pci 0000:00:1c.0:   bridge window [mem 0x80e00000-0x80ffffff 64bit pref]
[    0.399359] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    0.399369] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.399383] pci 0000:00:1c.1:   bridge window [mem 0xf0100000-0xf01fffff]
[    0.399395] pci 0000:00:1c.1:   bridge window [mem 0x80a00000-0x80bfffff 64bit pref]
[    0.399415] pci 0000:04:00.0: BAR 6: assigned [mem 0xf0520000-0xf053ffff pref]
[    0.399424] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[    0.399434] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.399447] pci 0000:00:1c.2:   bridge window [mem 0x80500000-0x809fffff]
[    0.399460] pci 0000:00:1c.2:   bridge window [mem 0xf0500000-0xf05fffff 64bit pref]
[    0.399476] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
[    0.399486] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[    0.399499] pci 0000:00:1c.3:   bridge window [mem 0x80100000-0x802fffff]
[    0.399512] pci 0000:00:1c.3:   bridge window [mem 0x80300000-0x804fffff 64bit pref]
[    0.399528] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
[    0.399595] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.399609] pci 0000:00:1c.0: setting latency timer to 64
[    0.399640] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.399652] pci 0000:00:1c.1: setting latency timer to 64
[    0.399682] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.399695] pci 0000:00:1c.2: setting latency timer to 64
[    0.399723] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.399736] pci 0000:00:1c.3: setting latency timer to 64
[    0.399754] pci 0000:00:1e.0: setting latency timer to 64
[    0.399765] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.399774] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.399783] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.399792] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.399801] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.399811] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.399821] pci_bus 0000:00: resource 10 [mem 0x80000000-0xfebfffff]
[    0.399830] pci_bus 0000:02: resource 0 [io  0x5000-0x5fff]
[    0.399838] pci_bus 0000:02: resource 1 [mem 0x80c00000-0x80dfffff]
[    0.399848] pci_bus 0000:02: resource 2 [mem 0x80e00000-0x80ffffff 64bit pref]
[    0.399857] pci_bus 0000:03: resource 0 [io  0x4000-0x4fff]
[    0.399865] pci_bus 0000:03: resource 1 [mem 0xf0100000-0xf01fffff]
[    0.399874] pci_bus 0000:03: resource 2 [mem 0x80a00000-0x80bfffff 64bit pref]
[    0.399885] pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
[    0.399894] pci_bus 0000:04: resource 1 [mem 0x80500000-0x809fffff]
[    0.399904] pci_bus 0000:04: resource 2 [mem 0xf0500000-0xf05fffff 64bit pref]
[    0.399913] pci_bus 0000:05: resource 0 [io  0x3000-0x3fff]
[    0.399922] pci_bus 0000:05: resource 1 [mem 0x80100000-0x802fffff]
[    0.399932] pci_bus 0000:05: resource 2 [mem 0x80300000-0x804fffff 64bit pref]
[    0.399942] pci_bus 0000:06: resource 4 [io  0x0000-0x0cf7]
[    0.399951] pci_bus 0000:06: resource 5 [io  0x0d00-0xffff]
[    0.399961] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[    0.399970] pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.399979] pci_bus 0000:06: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.399989] pci_bus 0000:06: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.400047] pci_bus 0000:06: resource 10 [mem 0x80000000-0xfebfffff]
[    0.400173] NET: Registered protocol family 2
[    0.400371] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.401240] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.402371] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.402935] TCP: Hash tables configured (established 131072 bind 65536)
[    0.402946] TCP reno registered
[    0.402961] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.402985] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.403243] NET: Registered protocol family 1
[    0.403292] pci 0000:00:02.0: Boot video device
[    0.403407] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.403444] pci 0000:00:1d.0: PCI INT A disabled
[    0.403471] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.403499] pci 0000:00:1d.1: PCI INT B disabled
[    0.403520] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.403548] pci 0000:00:1d.2: PCI INT C disabled
[    0.403568] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.403596] pci 0000:00:1d.3: PCI INT D disabled
[    0.403618] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.403671] pci 0000:00:1d.7: PCI INT A disabled
[    0.403724] PCI: CLS 64 bytes, default 64
[    0.403737] Simple Boot Flag at 0x36 set to 0x1
[    0.405013] audit: initializing netlink socket (disabled)
[    0.405042] type=2000 audit(1356535824.400:1): initialized
[    0.468205] highmem bounce pool size: 64 pages
[    0.468222] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.485658] VFS: Disk quotas dquot_6.5.2
[    0.485874] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.487887] fuse init (API version 7.17)
[    0.488307] msgmni has been set to 1678
[    0.489517] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.489629] io scheduler noop registered
[    0.489636] io scheduler deadline registered
[    0.489662] io scheduler cfq registered (default)
[    0.490068] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.490163] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.490332] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.490415] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    0.490576] pcieport 0000:00:1c.2: setting latency timer to 64
[    0.490659] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[    0.490821] pcieport 0000:00:1c.3: setting latency timer to 64
[    0.490905] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[    0.491179] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.491284] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.491512] intel_idle: MWAIT substates: 0x20220
[    0.491532] intel_idle: v0.4 model 0x1C
[    0.491538] intel_idle: lapic_timer_reliable_states 0x2
[    0.491546] Marking TSC unstable due to TSC halts in idle states deeper than C2
[    0.491990] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.492431] ACPI: AC Adapter [ACAD] (off-line)
[    0.492886] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    0.492939] ACPI: Lid Switch [LID0]
[    0.493168] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.493182] ACPI: Power Button [PWRB]
[    0.493397] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.493410] ACPI: Power Button [PWRF]
[    0.520739] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.520774] ACPI: Battery Slot [BAT1] (battery present)
[    0.520865] ERST: Table is not found!
[    0.520871] GHES: HEST is not enabled!
[    0.521143] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.522134] isapnp: Scanning for PnP cards...
[    0.689292] ACPI: Battery Slot [BAT1] (battery present)
[    0.877094] isapnp: No Plug & Play device found
[    0.944999] Freeing initrd memory: 13788k freed
[    1.009118] Linux agpgart interface v0.103
[    1.009278] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[    1.009452] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[    1.009639] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    1.009908] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    1.014162] brd: module loaded
[    1.016438] loop: module loaded
[    1.016758] ahci 0000:00:1f.2: version 3.0
[    1.016787] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.016880] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[    1.016992] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
[    1.017001] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[    1.017012] ahci 0000:00:1f.2: setting latency timer to 64
[    1.018420] scsi0 : ahci
[    1.018679] scsi1 : ahci
[    1.018887] scsi2 : ahci
[    1.019100] scsi3 : ahci
[    1.019425] ata1: SATA max UDMA/133 abar m1024@0xf0444400 port 0xf0444500 irq 44
[    1.019432] ata2: DUMMY
[    1.019439] ata3: SATA max UDMA/133 abar m1024@0xf0444400 port 0xf0444600 irq 44
[    1.019444] ata4: DUMMY
[    1.019728] ata_piix 0000:00:1f.1: version 2.13
[    1.019756] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.019823] ata_piix 0000:00:1f.1: setting latency timer to 64
[    1.020643] scsi4 : ata_piix
[    1.020844] scsi5 : ata_piix
[    1.021674] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[    1.021682] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[    1.021900] ata6: port disabled--ignoring
[    1.022900] Fixed MDIO Bus: probed
[    1.022964] tun: Universal TUN/TAP device driver, 1.6
[    1.022969] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.023223] PPP generic driver version 2.4.2
[    1.023534] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.023581] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.023620] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.023628] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.023761] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.023801] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    1.023820] ehci_hcd 0000:00:1d.7: debug port 1
[    1.027715] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    1.027756] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0444000
[    1.040091] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.040420] hub 1-0:1.0: USB hub found
[    1.040433] hub 1-0:1.0: 8 ports detected
[    1.040615] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.040657] uhci_hcd: USB Universal Host Controller Interface driver
[    1.040707] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.040724] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.040732] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.040865] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.040908] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[    1.041247] hub 2-0:1.0: USB hub found
[    1.041259] hub 2-0:1.0: 2 ports detected
[    1.041403] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.041424] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.041432] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.041571] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.041635] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[    1.041970] hub 3-0:1.0: USB hub found
[    1.041982] hub 3-0:1.0: 2 ports detected
[    1.042130] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.042147] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.042154] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.042280] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.042339] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[    1.042671] hub 4-0:1.0: USB hub found
[    1.042682] hub 4-0:1.0: 2 ports detected
[    1.042828] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    1.042844] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    1.042851] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.042975] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.043034] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[    1.043387] hub 5-0:1.0: USB hub found
[    1.043413] hub 5-0:1.0: 2 ports detected
[    1.043725] usbcore: registered new interface driver libusual
[    1.043830] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.077337] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.077356] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.077740] mousedev: PS/2 mouse device common for all mice
[    1.078240] rtc_cmos 00:06: RTC can wake from S4
[    1.078464] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    1.078513] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.078693] device-mapper: uevent: version 1.0.3
[    1.078895] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    1.078988] EISA: Probing bus 0 at eisa.0
[    1.078995] EISA: Cannot allocate resource for mainboard
[    1.079001] Cannot allocate resource for EISA slot 1
[    1.079007] Cannot allocate resource for EISA slot 2
[    1.079012] Cannot allocate resource for EISA slot 3
[    1.079017] Cannot allocate resource for EISA slot 4
[    1.079023] Cannot allocate resource for EISA slot 5
[    1.079028] Cannot allocate resource for EISA slot 6
[    1.079033] Cannot allocate resource for EISA slot 7
[    1.079039] Cannot allocate resource for EISA slot 8
[    1.079043] EISA: Detected 0 cards.
[    1.079060] cpufreq-nforce2: No nForce2 chipset.
[    1.079236] cpuidle: using governor ladder
[    1.079529] cpuidle: using governor menu
[    1.079534] EFI Variables Facility v0.08 2004-May-17
[    1.080171] TCP cubic registered
[    1.080471] NET: Registered protocol family 10
[    1.081882] NET: Registered protocol family 17
[    1.081927] Registering the dns_resolver key type
[    1.081985] Using IPI No-Shortcut mode
[    1.082376] PM: Hibernation image not present or could not be loaded.
[    1.082402] registered taskstats version 1
[    1.103801]   Magic number: 8:61:539
[    1.103851] tty ttyS19: hash matches
[    1.103968] rtc_cmos 00:06: setting system clock to 2012-12-26 15:30:25 UTC (1356535825)
[    1.104966] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.104973] EDD information not available.
[    1.119542] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.336140] ata3: SATA link down (SStatus 0 SControl 300)
[    1.336186] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.336868] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.352129] usb 1-2: new high-speed USB device number 2 using ehci_hcd
[    1.400253] ata1.00: ATA-8: TOSHIBA MK1655GSX, FG011M, max UDMA/100
[    1.400262] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.404355] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.404646] ata1.00: configured for UDMA/100
[    1.405067] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK1655GS FG01 PQ: 0 ANSI: 5
[    1.405447] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.405617] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.405864] sd 0:0:0:0: [sda] Write Protect is off
[    1.405874] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.405980] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.524185]  sda: sda1 sda2 sda3 < sda5 sda6 >
[    1.525474] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.525546] Freeing unused kernel memory: 712k freed
[    1.526079] Write protecting the kernel text: 5628k
[    1.526171] Write protecting the kernel read-only data: 2324k
[    1.568542] udevd[96]: starting version 175
[    1.874189] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.874274] r8169 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.874386] r8169 0000:04:00.0: setting latency timer to 64
[    1.874617] r8169 0000:04:00.0: irq 45 for MSI/MSI-X
[    1.878550] r8169 0000:04:00.0: eth0: RTL8102e at 0xf801e000, 00:23:5a:fb:2c:31, XID 04c00000 IRQ 45
[    4.153092] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[  148.309239] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  148.358627] udevd[280]: starting version 175
[  148.384119] Adding 2084860k swap on /dev/sda6.  Priority:-1 extents:1 across:2084860k
[  148.431553] lp: driver loaded but no devices found
[  148.592643] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[  148.604243] acpi device:01: registered as cooling_device2
[  148.604548] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[  148.604732] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[  148.646709] [drm] Initialized drm 1.1.0 20060810
[  148.699004] wmi: Mapper loaded
[  148.723859] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19
[  148.725250] input: Toshiba input device as /devices/virtual/input/input5
[  148.839477] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[  148.839494] i915 0000:00:02.0: setting latency timer to 64
[  148.881568] cfg80211: Calling CRDA to update world regulatory domain
[  148.913102] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[  148.913113] [drm] Driver supports precise vblank timestamp query.
[  148.969616] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[  149.157319] Registered led device: toshiba::illumination
[  149.168491] intel_rng: FWH not detected
[  149.197480] leds_ss4200: no LED devices found
[  149.206493] toshiba_bluetooth: Detected Toshiba ACPI Bluetooth device - installing RFKill handler
[  149.215538] toshiba_bluetooth: Re-enabling Toshiba Bluetooth
[  149.281101] ppdev: user-space parallel port driver
[  149.286656] Bluetooth: Core ver 2.16
[  149.286805] NET: Registered protocol family 31
[  149.286812] Bluetooth: HCI device and connection manager initialized
[  149.286820] Bluetooth: HCI socket layer initialized
[  149.286826] Bluetooth: L2CAP socket layer initialized
[  149.286845] Bluetooth: SCO socket layer initialized
[  149.339110] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  149.339120] Bluetooth: BNEP filters: protocol multicast
[  149.361012] Bluetooth: RFCOMM TTY layer initialized
[  149.361032] Bluetooth: RFCOMM socket layer initialized
[  149.361039] Bluetooth: RFCOMM ver 1.11
[  149.598212] [drm] initialized overlay support
[  149.623299] Linux video capture interface: v2.00
[  149.625740] uvcvideo: Found UVC 1.00 device USB2.0 UVC WebCam (04f2:b128)
[  149.631938] fbcon: inteldrmfb (fb0) is primary device
[  149.632407] Console: switching to colour frame buffer device 128x37
[  149.632483] fb0: inteldrmfb frame buffer device
[  149.632490] drm: registered panic notifier
[  149.632571] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[  149.636921] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[  149.636957] ath9k 0000:03:00.0: setting latency timer to 64
[  149.646049] input: USB2.0 UVC WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/input/input6
[  149.646452] usbcore: registered new interface driver uvcvideo
[  149.646460] USB Video Class driver (1.1.1)
[  149.692747] ath: EEPROM regdomain: 0x65
[  149.692755] ath: EEPROM indicates we should expect a direct regpair map
[  149.692767] ath: Country alpha2 being used: 00
[  149.692773] ath: Regpair used: 0x65
[  149.692783] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[  149.692795] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  149.692804] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[  149.692815] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  149.692824] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[  149.692834] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  149.692842] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[  149.692853] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  149.692861] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[  149.692872] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  149.692880] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[  149.692890] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  149.692898] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[  149.692909] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  149.692917] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[  149.692928] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  149.692936] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[  149.692947] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  149.692956] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[  149.692966] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  149.692974] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[  149.692984] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  149.692992] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[  149.693003] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  149.693011] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[  149.693021] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  149.693029] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[  149.701811] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[  149.701924] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[  149.702002] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[  149.702243] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[  149.710509] usb 5-1: new full-speed USB device number 2 using uhci_hcd
[  149.741705] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[  149.760466] Registered led device: ath9k-phy0
[  149.760495] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8860000, irq=17
[  149.797545] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[  149.798149] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[  150.192078] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  150.193997] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  150.276299] r8169 0000:04:00.0: eth0: link down
[  150.277433] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  150.284044] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  150.400205] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  150.400226] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  150.406853] init: failsafe main process (540) killed by TERM signal
[  150.950446] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[  150.950459] cfg80211: World regulatory domain updated:
[  150.950466] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  150.950476] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  150.950486] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  150.950496] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  150.950506] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  150.950516] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  150.955103] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input9
[  151.006375] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input10
[  151.197451] Bluetooth: Generic Bluetooth USB driver ver 0.6
[  151.208653] usbcore: registered new interface driver btusb
[  153.118570] wlan0: authenticate with 00:14:bf:1e:ba:18 (try 1)
[  153.130968] wlan0: authenticated
[  153.131751] wlan0: associate with 00:14:bf:1e:ba:18 (try 1)
[  153.138091] wlan0: RX AssocResp from 00:14:bf:1e:ba:18 (capab=0x411 status=0 aid=1)
[  153.138102] wlan0: associated
[  153.146149] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  164.496068] wlan0: no IPv6 routers present
[  173.804210] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.

Trio3b
Level 1
Level 1
 
Posts: 28
Joined: Tue Apr 17, 2012 12:18 am

Re: Toshiba NB205 long boot time

Postby lahirdenganselamat on Wed Dec 26, 2012 8:29 pm

Trio3b wrote:
Code: Select all
[    1.878550] r8169 0000:04:00.0: eth0: RTL8102e at 0xf801e000, 00:23:5a:fb:2c:31, XID 04c00000 IRQ 45
[    4.153092] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[  148.309239] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  148.358627] udevd[280]: starting version 175
[  148.384119] Adding 2084860k swap on /dev/sda6.  Priority:-1 extents:1 across:2084860k


That was really weird you know.. the number between [] is the time (second) I don't know whats the problem or how to solved it (so we'll just have to wait for others to answer), but how about trying some live CD/USB and look at the dmesg again? if the live system boot with normal time, I think reinstalling will be the best option..
ASUS 1215B AMD E-350 with Linux Mint 15 KDE, Precise Puppy, and Saluki
User avatar
lahirdenganselamat
Level 4
Level 4
 
Posts: 437
Joined: Mon Oct 17, 2011 10:30 pm
Location: Yogyakarta

Re: Toshiba NB205 long boot time

Postby Trio3b on Thu Dec 27, 2012 4:53 am

Sorry forgot to mention this is a dual boot on this 160gb HDD with WinXP, and selected "install alongside WinXP" during install. defragged and ran chkdsk on WinXP before install.

OK, noticed gparted available in live mode but after install not available. So to check why hanging at mounting sda5 as shown by previous dmesg, I ran LM13 live (via unetbootin) again and saw that installer only created one large partition next to Winxp and then swap and then recovery partition. Sorry no screenshots, but from beginning of disk:

0-60gb ntfs Winxp
60-120gb ext4 sda5
120-124gb swap
124-150 fat32 recovery

So reinstalled this time selecting custom partitioning and this time used empty space to create the normal ( for me) partition scheme:
sda5 - /
swap
sda7 /home



gparted image :

-> http://i1115.photobucket.com/albums/k54 ... 41272d.png

rebooted and still have long boot . dmesg returns:
1.907419] r8169 0000:04:00.0: eth0: RTL8102e at 0xf801e000, 00:23:5a:fb:2c:31, XID 04c00000 IRQ 45
[ 5.826150] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 196.333201] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 196.400142] udevd[284]: starting version 175

It appears there is some problem mounting sda5 with root partition. Seems I have partition problems.


/etc/fstab shows:
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda5 during installation
UUID=225b8565-7f7f-41cd-b8ff-0a6f729e352c / ext4 errors=remount-ro 0 1
# /home was on /dev/sda7 during installation
UUID=98799358-93c6-4328-a0de-dc86997c8c79 /home ext4 defaults 0 2
# swap was on /dev/sda6 during installation
UUID=711a88e4-07d7-4ea9-a7f1-388c2fa27695 none swap sw 0 0

I think there might be a problem with primary/logical/extended partitions and reading sda5. Sorry, new to gparted. Also read something about /var/lib/readahead/pack but not sure if this is the problem.

Any help appreciated
Trio3b
Level 1
Level 1
 
Posts: 28
Joined: Tue Apr 17, 2012 12:18 am

Re: Toshiba NB205 long boot time

Postby Trio3b on Fri Dec 28, 2012 11:25 pm

bump? Any ideas about the partition scheme causing long boot time.

Thanks
Trio3b
Level 1
Level 1
 
Posts: 28
Joined: Tue Apr 17, 2012 12:18 am


Return to Newbie Questions

Who is online

Users browsing this forum: Bing [Bot], clankfu, Pilosopong Tasyo and 37 guests