Can't delete printers with LMDE XFCE UP6

Archived topics about LMDE 1 and LMDE 2
Locked
mikecz

Can't delete printers with LMDE XFCE UP6

Post by mikecz »

I'm trying to clean up some old printers in my print manager, and whenever I try to delete a printer defined in the Printing contol panel (System > Printing, system-config-printer 1.3.7), the program hangs and I have to force it to close. When I try to delete it via http://localhost:631, I get asked for a username & password, and it fails with a message "forbidden".

I think this may be a known bug, because when I try to look at any of the printer properties I get an error box that says:

"Option 'printer-resolution' has value '(unknown IPP tag)' and cannot be edited"

I'm using cups, and all the printers happen to be HPs of various types.

And, if its helpful, apparently even printing to PDF is broken.

MikeC
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 1 time in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
mockturtl

Re: Can't delete printers with LMDE XFCE UP6

Post by mockturtl »

mikecz wrote:I'm trying to clean up some old printers in my print manager, and whenever I try to delete a printer defined in the Printing contol panel (System > Printing, system-config-printer 1.3.7), the program hangs and I have to force it to close. When I try to delete it via http://localhost:631, I get asked for a username & password, and it fails with a message "forbidden".

I think this may be a known bug, because when I try to look at any of the printer properties I get an error box that says:

"Option 'printer-resolution' has value '(unknown IPP tag)' and cannot be edited"

I'm using cups, and all the printers happen to be HPs of various types.

And, if its helpful, apparently even printing to PDF is broken.

MikeC
May be relevant: http://forums.linuxmint.com/viewtopic.p ... 20#p673880
mikecz

Re: Can't delete printers with LMDE XFCE UP6

Post by mikecz »

mockturtl wrote:
mikecz wrote:I'm trying to clean up some old printers in my print manager, and whenever I try to delete a printer defined in the Printing contol panel (System > Printing, system-config-printer 1.3.7), the program hangs and I have to force it to close. When I try to delete it via http://localhost:631, I get asked for a username & password, and it fails with a message "forbidden".

I think this may be a known bug, because when I try to look at any of the printer properties I get an error box that says:

"Option 'printer-resolution' has value '(unknown IPP tag)' and cannot be edited"

I'm using cups, and all the printers happen to be HPs of various types.

And, if its helpful, apparently even printing to PDF is broken.

MikeC
May be relevant: http://forums.linuxmint.com/viewtopic.p ... 20#p673880
I did find that thread with a Google search, but it didn't seem to be helpful since that looks to be about people with issues printing from a live CD session. I know printing was working fine as of UP5 (the last time I did any printing with this particular box), so something in UP6 must have broken CUPS.

I will go through the thread again, though, just to see if I missed anything.

MikeC
zerozero

Re: Can't delete printers with LMDE XFCE UP6

Post by zerozero »

mikecz wrote:And, if its helpful, apparently even printing to PDF is broken.
see Schoelje's last post http://forums.linuxmint.com/viewtopic.p ... 77#p674577
mikecz

Re: Can't delete printers with LMDE XFCE UP6

Post by mikecz »

zerozero wrote:
mikecz wrote:And, if its helpful, apparently even printing to PDF is broken.
see Schoelje's last post http://forums.linuxmint.com/viewtopic.p ... 77#p674577
I did the steps in the post, and I am now able to print PDFs (to ~/PDF, which is different than before when it went right into my home directory), but no change for the other behaviors of not being able to delete existing printers. I haven't tried adding a new printer yet, and may just leave it be since I have access to other computers that will print, and will likely be reinstalling LMDE Cinnamon when they release the updated ISOs. But I'm still mystified about what's happening, especially if this is a known upstream bug.

I'm tempted to try and completely remove then reinstall CUPS, but I'm leery since I don't know which packages I'll need to do that cleanly.

But, at least something is fixed, and I'm grateful for the help.

MikeC
mikecz

Re: Can't delete printers with LMDE XFCE UP6

Post by mikecz »

mikecz wrote:
zerozero wrote:
mikecz wrote:And, if its helpful, apparently even printing to PDF is broken.
see Schoelje's last post http://forums.linuxmint.com/viewtopic.p ... 77#p674577
I did the steps in the post, and I am now able to print PDFs (to ~/PDF, which is different than before when it went right into my home directory), but no change for the other behaviors of not being able to delete existing printers. I haven't tried adding a new printer yet, and may just leave it be since I have access to other computers that will print, and will likely be reinstalling LMDE Cinnamon when they release the updated ISOs. But I'm still mystified about what's happening, especially if this is a known upstream bug.

I'm tempted to try and completely remove then reinstall CUPS, but I'm leery since I don't know which packages I'll need to do that cleanly.

But, at least something is fixed, and I'm grateful for the help.

MikeC
EDIT: I deleted the printers the old fashioned way: by stopping CUPs with the /etc/rc2.d/S19cups script, and then manually removing the relevant sections of /etc/cups/printers.conf, then restarting CUPS.

I will see if I can add printers another time, but I am still interested in where the bug lies in this case.

EDIT 2: Since I couldn't let this go, I hooked up a known working printer, and lo and behold CUPS automatically identified it (an HP OfficeJet 6000-E609n, a very nice piece of kit I must say), configured it, and I was able to print without problem, including using the duplexer (which confirmed that it was using the correct driver). And I still could not delete it with the System > Printers program and had to go in manually to remove it.

I'm thinking its a bug in the manager program, and though I have a decent work around, I am still curious about where this came from and how to fix it.
Locked

Return to “LMDE Archive”