Linuks on HDD and Windows on SSD

[padzikm]

Hi, I have problem with booting both systems - windows is installed on whole ssd, half of hdd is for random stuff and second half of hdd is for mint maya 64bit. I installed windows at first, then I tried to manually install mint, but I got report 'failed to install efi-boot', so i've chosen default installation from mint menu. It was ok, after restart grub showed both linuks and windows, but only windows started - after choosing linuks grub4dos appeared and there was prompt grub>_ with minimum shell syntax :/ So i've installed easybcd, and afterthar i could start linuks with no problem, but i couldn't start windows, due to error: uknown command 'drivemap' and error: invalid efi file path
So in summary i can access both systems, but it depends on which bootloader I choose - can you help me fix this?
I have asus laptop with uefi and disabled secure boot

[padzikm]

Result of bootinfoscript:

Code: Select all

                  Boot Info Script 0.61      [1 April 2012]


============================= Boot Info Summary: ===============================

 => Windows is installed in the MBR of /dev/sda.
 => Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector
    1446256904 of the same hard drive for core.img, but core.img can not be
    found at this location.

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  Windows 7: FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System: 
    Boot files:        /efi/arch/grubx64.efi /bootmgr /boot/bcd

sda2: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows Vista/7: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System: 
    Boot files:        /bootmgr /Boot/BCD /Windows/System32/winload.exe

sdb1: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows Vista/7: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System: 
    Boot files:       

sdb2: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  -
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System: 
    Boot files:        /efi/linuxmint/grubx64.efi

sdb3: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info:
    Operating System:  Linux Mint 13 Maya
    Boot files:        /boot/grub/grub.cfg /etc/fstab

sdb4: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info:

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 256.1 GB, 256060514304 bytes
255 heads, 63 sectors/track, 31130 cylinders, total 500118192 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1                   8    52,428,807    52,428,800  1c Hidden W95 FAT32 (LBA)
/dev/sda2    *     52,428,808   500,117,503   447,688,696   7 NTFS / exFAT / HPFS


Drive: sdb _____________________________________________________________________

Disk /dev/sdb: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1                   1 1,465,149,167 1,465,149,167  ee GPT


GUID Partition Table detected.

Partition    Start Sector    End Sector  # of Sectors System
/dev/sdb1           2,048 1,068,769,543 1,068,767,496 Data partition (Windows/Linux)
/dev/sdb2   1,068,769,544 1,068,964,856       195,313 EFI System partition
/dev/sdb3   1,068,964,857 1,448,455,091   379,490,235 Data partition (Windows/Linux)
/dev/sdb4   1,448,455,092 1,465,149,054    16,693,963 Swap partition (Linux)

"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        40B0-0602                              vfat       RECOVERY
/dev/sda2        808A9B978A9B8874                       ntfs       OS
/dev/sdb1        4966CAE601EC7D65                       ntfs       Data
/dev/sdb2        C6F0-A50E                              vfat       
/dev/sdb3        28e6f4e5-46d3-41b2-a748-8725e90447e0   ext4       
/dev/sdb4        b3a3ee91-ffd4-42ec-82dd-b8431a45dbbf   swap       

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sdb2        /boot/efi                vfat       (rw)
/dev/sdb3        /                        ext4       (rw,errors=remount-ro)


=========================== sdb3/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
  insmod efi_gop
  insmod efi_uga
  insmod video_bochs
  insmod video_cirrus
}

insmod part_gpt
insmod ext2
set root='(hd1,gpt3)'
search --no-floppy --fs-uuid --set=root 28e6f4e5-46d3-41b2-a748-8725e90447e0
if loadfont /usr/share/grub/unicode.pf2 ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  insmod part_gpt
  insmod ext2
  set root='(hd1,gpt3)'
  search --no-floppy --fs-uuid --set=root 28e6f4e5-46d3-41b2-a748-8725e90447e0
  set locale_dir=($root)/boot/grub/locale
  set lang=en_US
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
  set timeout=-1
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/06_mint_theme ###
set menu_color_normal=white/black
set menu_color_highlight=white/light-gray
### END /etc/grub.d/06_mint_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
   set gfxpayload="$1"
   if [ "$1" = "keep" ]; then
      set vt_handoff=vt.handoff=7
   else
      set vt_handoff=
   fi
}
if [ ${recordfail} != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Linux Mint 13 Cinnamon 64-bit, 3.2.0-23-generic (/dev/sdb3)' --class linuxmint --class gnu-linux --class gnu --class os {
   recordfail
   gfxmode $linux_gfx_mode
   insmod gzio
   insmod part_gpt
   insmod ext2
   set root='(hd1,gpt3)'
   search --no-floppy --fs-uuid --set=root 28e6f4e5-46d3-41b2-a748-8725e90447e0
   linux   /boot/vmlinuz-3.2.0-23-generic root=UUID=28e6f4e5-46d3-41b2-a748-8725e90447e0 ro   quiet splash $vt_handoff
   initrd   /boot/initrd.img-3.2.0-23-generic
}
menuentry 'Linux Mint 13 Cinnamon 64-bit, 3.2.0-23-generic (/dev/sdb3) -- recovery mode' --class linuxmint --class gnu-linux --class gnu --class os {
   recordfail
   insmod gzio
   insmod part_gpt
   insmod ext2
   set root='(hd1,gpt3)'
   search --no-floppy --fs-uuid --set=root 28e6f4e5-46d3-41b2-a748-8725e90447e0
   echo   'Loading Linux 3.2.0-23-generic ...'
   linux   /boot/vmlinuz-3.2.0-23-generic root=UUID=28e6f4e5-46d3-41b2-a748-8725e90447e0 ro recovery nomodeset
   echo   'Loading initial ramdisk ...'
   initrd   /boot/initrd.img-3.2.0-23-generic
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/10_lupin ###
### END /etc/grub.d/10_lupin ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
   insmod part_gpt
   insmod ext2
   set root='(hd1,gpt3)'
   search --no-floppy --fs-uuid --set=root 28e6f4e5-46d3-41b2-a748-8725e90447e0
   linux16   /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
   insmod part_gpt
   insmod ext2
   set root='(hd1,gpt3)'
   search --no-floppy --fs-uuid --set=root 28e6f4e5-46d3-41b2-a748-8725e90447e0
   linux16   /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows Recovery Environment (loader) (on /dev/sda1)" --class windows --class os {
   insmod part_msdos
   insmod fat
   set root='(hd0,msdos1)'
   search --no-floppy --fs-uuid --set=root 40B0-0602
   drivemap -s (hd0) ${root}
   chainloader +1
}
menuentry "Windows 8 (loader) (on /dev/sda2)" --class windows --class os {
   insmod part_msdos
   insmod ntfs
   set root='(hd0,msdos2)'
   search --no-floppy --fs-uuid --set=root 808A9B978A9B8874
   drivemap -s (hd0) ${root}
   chainloader +1
}
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sdb3/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    nodev,noexec,nosuid 0       0
# / was on /dev/sdb3 during installation
UUID=28e6f4e5-46d3-41b2-a748-8725e90447e0 /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sdb2 during installation
UUID=C6F0-A50E  /boot/efi       vfat    defaults        0       1
# swap was on /dev/sdb4 during installation
UUID=b3a3ee91-ffd4-42ec-82dd-b8431a45dbbf none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sdb3: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

 517.878548145 = 556.067856896  boot/grub/grub.cfg                             1
 510.856457233 = 548.527944192  boot/initrd.img-3.2.0-23-generic               2
 685.855690479 = 736.431940096  boot/vmlinuz-3.2.0-23-generic                  1
 510.856457233 = 548.527944192  initrd.img                                     2
 685.855690479 = 736.431940096  vmlinuz                                        1