Masterizzatore esterno non riconosciuto

Italian Forum

Masterizzatore esterno non riconosciuto

Postby Happenz on Wed Jan 30, 2013 5:49 am

Salve,
Ho recentemente acquistato un masterizzatore esterno della samsung, modello SE-S084 ver.C

Il problema è che una volta collegato al pc, si accende la luce di alimentazione, ma il sistema non lo riconosce affatto!
Ho provato su due netbook che montavano la stessa versione di Linux e su un fisso con Ubuntu---> niente da fare.
Ho provato a smanettare tramite terminale, seguendo guide trovate sul web, ma niente.
Vi chiedo una mano urgentemente perchè ne ho davvero bisogno.
Vi posto i comandi principali richiesti sul web:

lsusb:
Code: Select all
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 13fd:0842 Initio Corporation
Bus 002 Device 002: ID 04d9:0499 Holtek Semiconductor, Inc. Optical Mouse


dmesg | grep usb:
Code: Select all
[    0.396678] usbcore: registered new interface driver usbfs
[    0.396736] usbcore: registered new interface driver hub
[    0.396851] usbcore: registered new device driver usb
[    1.059816] usbcore: registered new interface driver libusual
[    1.368103] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    1.604173] usb 1-3: new high-speed USB device number 4 using ehci_hcd
[    1.742859] scsi6 : usb-storage 1-3:1.0
[    1.743048] usbcore: registered new interface driver usb-storage
[    1.976104] usb 2-2: new low-speed USB device number 2 using uhci_hcd
[    2.277792] input: HID 04d9:0499 as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input5
[    2.278718] generic-usb 0003:04D9:0499.0001: input,hidraw0: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:1d.0-2/input0
[    2.278797] usbcore: registered new interface driver usbhid
[    2.278805] usbhid: USB HID core driver
[    2.424086] usb 1-1: new high-speed USB device number 5 using ehci_hcd
[    2.884064] usb 2-1: new full-speed USB device number 3 using uhci_hcd
[    3.031993] usb 2-1: not running at top speed; connect to a high speed hub
[    6.188145] usb 1-1: new high-speed USB device number 6 using ehci_hcd
[    6.280093] usb 2-1: USB disconnect, device number 3
[    6.520135] usb 2-1: new full-speed USB device number 4 using uhci_hcd
[    6.668047] usb 2-1: not running at top speed; connect to a high speed hub
[    9.824127] usb 1-1: new high-speed USB device number 7 using ehci_hcd
[   10.044143] usb 2-1: USB disconnect, device number 4
[   10.284112] usb 2-1: new full-speed USB device number 5 using uhci_hcd
[   10.432041] usb 2-1: not running at top speed; connect to a high speed hub
[   13.776104] usb 1-1: new high-speed USB device number 9 using ehci_hcd
[   13.868119] usb 2-1: USB disconnect, device number 5
[   14.108101] usb 2-1: new full-speed USB device number 6 using uhci_hcd
[   14.256045] usb 2-1: not running at top speed; connect to a high speed hub
[   17.356485] usb 2-1: USB disconnect, device number 6
[   17.724103] usb 1-1: new high-speed USB device number 11 using ehci_hcd
[   18.412102] usb 1-1: new high-speed USB device number 14 using ehci_hcd
[   18.872123] usb 2-1: new full-speed USB device number 7 using uhci_hcd
[   19.020043] usb 2-1: not running at top speed; connect to a high speed hub
[   22.176103] usb 1-1: new high-speed USB device number 15 using ehci_hcd
[   22.268114] usb 2-1: USB disconnect, device number 7
[   22.508099] usb 2-1: new full-speed USB device number 8 using uhci_hcd
[   22.655995] usb 2-1: not running at top speed; connect to a high speed hub
[   23.377835] input: WebCam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input7
[   23.378246] usbcore: registered new interface driver uvcvideo
[   25.824094] usb 1-1: new high-speed USB device number 16 using ehci_hcd
[   25.918054] usb 2-1: USB disconnect, device number 8
[   26.200090] usb 2-1: new full-speed USB device number 9 using uhci_hcd
[   26.348058] usb 2-1: not running at top speed; connect to a high speed hub
[   26.442545] input: WebCam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input11
[   76.780077] usb 2-1: reset full-speed USB device number 9 using uhci_hcd
[   82.456095] usb 2-1: reset full-speed USB device number 9 using uhci_hcd
[  402.368179] usb 2-1: reset full-speed USB device number 9 using uhci_hcd
[  402.488170] usb 2-1: device descriptor read/64, error -71
[  402.712186] usb 2-1: device descriptor read/64, error -71
[  402.928141] usb 2-1: reset full-speed USB device number 9 using uhci_hcd
[  403.048075] usb 2-1: device descriptor read/64, error -71
[  403.272120] usb 2-1: device descriptor read/64, error -71
[  403.488130] usb 2-1: reset full-speed USB device number 9 using uhci_hcd
[  403.904113] usb 2-1: device not accepting address 9, error -71
[  404.072067] usb 2-1: reset full-speed USB device number 9 using uhci_hcd
[  404.480092] usb 2-1: device not accepting address 9, error -71
[  404.480177] usb 2-1: USB disconnect, device number 9
[  404.756100] usb 2-1: new full-speed USB device number 10 using uhci_hcd
[  404.876119] usb 2-1: device descriptor read/64, error -71
[  405.100089] usb 2-1: device descriptor read/64, error -71
[  405.316154] usb 2-1: new full-speed USB device number 11 using uhci_hcd
[  405.436122] usb 2-1: device descriptor read/64, error -71
[  405.664137] usb 2-1: device descriptor read/64, error -71
[  405.880136] usb 2-1: new full-speed USB device number 12 using uhci_hcd
[  406.292068] usb 2-1: device not accepting address 12, error -71
[  406.404120] usb 2-1: new full-speed USB device number 13 using uhci_hcd
[  406.812139] usb 2-1: device not accepting address 13, error -71



cdrecord -scanbus:
Code: Select all
scsibus0:
   0,0,0     0) 'ATA     ' 'TOSHIBA MK1652GS' 'LV02' Disk
   0,1,0     1) *
   0,2,0     2) *
   0,3,0     3) *
   0,4,0     4) *
   0,5,0     5) *
   0,6,0     6) *
   0,7,0     7) *
scsibus6:
   6,0,0   600) 'TSSTcorp' 'USB Mass Storage' '6.14' Removable Disk
   6,1,0   601) *
   6,2,0   602) *
   6,3,0   603) *
   6,4,0   604) *
   6,5,0   605) *
   6,6,0   606) *
   6,7,0   607) *


wodim --devices:
Code: Select all
wodim: Overview of accessible drives (0 found) :
-------------------------------------------------------------------------
-------------------------------------------------------------------------


ls -l /media:
Code: Select all
total 8
drwxr-xr-x 2 root root 4096 gen 30 10:06 cdrom0
drwxr-xr-x 2 root root 4096 gen 30 09:53 cdrom1


cat /etc/fstab:
Code: Select all
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    nodev,noexec,nosuid 0       0
# / was on /dev/sda1 during installation
UUID=c2d31b0c-ca99-4afe-84ce-ae6958b670d8 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=f2cc6fcb-3ddb-4bf2-8cc9-83f5d430f7fe none            swap    sw              0       0
/dev/scd0      /media/cdrom0  udf,iso9660 user,rw,noauto,exec,utf8 0      0


Grazie dell'attenzione,
Happenz
Happenz
Level 1
Level 1
 
Posts: 2
Joined: Wed Jan 30, 2013 5:37 am

Linux Mint is funded by ads and donations.
 

Re: Masterizzatore esterno non riconosciuto

Postby borgio3 on Wed Jan 30, 2013 10:45 am

Purtroppo non ti so rispondere, ho lo stesso problema.
borgio3
Level 4
Level 4
 
Posts: 227
Joined: Sun Jul 20, 2008 5:02 am
Location: Riccione - Italy


Return to Italiano (Italian)

Who is online

Users browsing this forum: No registered users and 2 guests