External Burner not recognized

Questions about hardware,drivers and peripherals
Forum rules
Before you post please read this

External Burner not recognized

Postby Happenz on Wed Jan 30, 2013 6:11 am

Hi guys,
i recently bought a Samsung External Burner, model SE-S084 ver.C
The problem is that Linux doesn't recognize it.

Here are some terminal commands:

lsusb:
Code: Select all
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 13fd:0842 Initio Corporation
Bus 002 Device 002: ID 04d9:0499 Holtek Semiconductor, Inc. Optical Mouse


dmesg | grep usb:
Code: Select all
[    0.396678] usbcore: registered new interface driver usbfs
[    0.396736] usbcore: registered new interface driver hub
[    0.396851] usbcore: registered new device driver usb
[    1.059816] usbcore: registered new interface driver libusual
[    1.368103] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    1.604173] usb 1-3: new high-speed USB device number 4 using ehci_hcd
[    1.742859] scsi6 : usb-storage 1-3:1.0
[    1.743048] usbcore: registered new interface driver usb-storage
[    1.976104] usb 2-2: new low-speed USB device number 2 using uhci_hcd
[    2.277792] input: HID 04d9:0499 as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input5
[    2.278718] generic-usb 0003:04D9:0499.0001: input,hidraw0: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:1d.0-2/input0
[    2.278797] usbcore: registered new interface driver usbhid
[    2.278805] usbhid: USB HID core driver
[    2.424086] usb 1-1: new high-speed USB device number 5 using ehci_hcd
[    2.884064] usb 2-1: new full-speed USB device number 3 using uhci_hcd
[    3.031993] usb 2-1: not running at top speed; connect to a high speed hub
[    6.188145] usb 1-1: new high-speed USB device number 6 using ehci_hcd
[    6.280093] usb 2-1: USB disconnect, device number 3
[    6.520135] usb 2-1: new full-speed USB device number 4 using uhci_hcd
[    6.668047] usb 2-1: not running at top speed; connect to a high speed hub
[    9.824127] usb 1-1: new high-speed USB device number 7 using ehci_hcd
[   10.044143] usb 2-1: USB disconnect, device number 4
[   10.284112] usb 2-1: new full-speed USB device number 5 using uhci_hcd
[   10.432041] usb 2-1: not running at top speed; connect to a high speed hub
[   13.776104] usb 1-1: new high-speed USB device number 9 using ehci_hcd
[   13.868119] usb 2-1: USB disconnect, device number 5
[   14.108101] usb 2-1: new full-speed USB device number 6 using uhci_hcd
[   14.256045] usb 2-1: not running at top speed; connect to a high speed hub
[   17.356485] usb 2-1: USB disconnect, device number 6
[   17.724103] usb 1-1: new high-speed USB device number 11 using ehci_hcd
[   18.412102] usb 1-1: new high-speed USB device number 14 using ehci_hcd
[   18.872123] usb 2-1: new full-speed USB device number 7 using uhci_hcd
[   19.020043] usb 2-1: not running at top speed; connect to a high speed hub
[   22.176103] usb 1-1: new high-speed USB device number 15 using ehci_hcd
[   22.268114] usb 2-1: USB disconnect, device number 7
[   22.508099] usb 2-1: new full-speed USB device number 8 using uhci_hcd
[   22.655995] usb 2-1: not running at top speed; connect to a high speed hub
[   23.377835] input: WebCam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input7
[   23.378246] usbcore: registered new interface driver uvcvideo
[   25.824094] usb 1-1: new high-speed USB device number 16 using ehci_hcd
[   25.918054] usb 2-1: USB disconnect, device number 8
[   26.200090] usb 2-1: new full-speed USB device number 9 using uhci_hcd
[   26.348058] usb 2-1: not running at top speed; connect to a high speed hub
[   26.442545] input: WebCam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input11
[   76.780077] usb 2-1: reset full-speed USB device number 9 using uhci_hcd
[   82.456095] usb 2-1: reset full-speed USB device number 9 using uhci_hcd
[  402.368179] usb 2-1: reset full-speed USB device number 9 using uhci_hcd
[  402.488170] usb 2-1: device descriptor read/64, error -71
[  402.712186] usb 2-1: device descriptor read/64, error -71
[  402.928141] usb 2-1: reset full-speed USB device number 9 using uhci_hcd
[  403.048075] usb 2-1: device descriptor read/64, error -71
[  403.272120] usb 2-1: device descriptor read/64, error -71
[  403.488130] usb 2-1: reset full-speed USB device number 9 using uhci_hcd
[  403.904113] usb 2-1: device not accepting address 9, error -71
[  404.072067] usb 2-1: reset full-speed USB device number 9 using uhci_hcd
[  404.480092] usb 2-1: device not accepting address 9, error -71
[  404.480177] usb 2-1: USB disconnect, device number 9
[  404.756100] usb 2-1: new full-speed USB device number 10 using uhci_hcd
[  404.876119] usb 2-1: device descriptor read/64, error -71
[  405.100089] usb 2-1: device descriptor read/64, error -71
[  405.316154] usb 2-1: new full-speed USB device number 11 using uhci_hcd
[  405.436122] usb 2-1: device descriptor read/64, error -71
[  405.664137] usb 2-1: device descriptor read/64, error -71
[  405.880136] usb 2-1: new full-speed USB device number 12 using uhci_hcd
[  406.292068] usb 2-1: device not accepting address 12, error -71
[  406.404120] usb 2-1: new full-speed USB device number 13 using uhci_hcd
[  406.812139] usb 2-1: device not accepting address 13, error -71


cdrecord -scanbus:
Code: Select all
scsibus0:
   0,0,0     0) 'ATA     ' 'TOSHIBA MK1652GS' 'LV02' Disk
   0,1,0     1) *
   0,2,0     2) *
   0,3,0     3) *
   0,4,0     4) *
   0,5,0     5) *
   0,6,0     6) *
   0,7,0     7) *
scsibus6:
   6,0,0   600) 'TSSTcorp' 'USB Mass Storage' '6.14' Removable Disk
   6,1,0   601) *
   6,2,0   602) *
   6,3,0   603) *
   6,4,0   604) *
   6,5,0   605) *
   6,6,0   606) *
   6,7,0   607) *


wodim --devices:
Code: Select all
wodim: Overview of accessible drives (0 found) :
-------------------------------------------------------------------------
-------------------------------------------------------------------------


ls -l /media:
Code: Select all
total 8
drwxr-xr-x 2 root root 4096 gen 30 10:06 cdrom0
drwxr-xr-x 2 root root 4096 gen 30 09:53 cdrom1


cat /etc/fstab:
Code: Select all
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    nodev,noexec,nosuid 0       0
# / was on /dev/sda1 during installation
UUID=c2d31b0c-ca99-4afe-84ce-ae6958b670d8 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=f2cc6fcb-3ddb-4bf2-8cc9-83f5d430f7fe none            swap    sw              0       0
/dev/scd0      /media/cdrom0  udf,iso9660 user,rw,noauto,exec,utf8 0      0


Thanks for your attention,
Happenz
Happenz
Level 1
Level 1
 
Posts: 2
Joined: Wed Jan 30, 2013 5:37 am

Linux Mint is funded by ads and donations.
 

Return to Hardware Support

Who is online

Users browsing this forum: Benny-boy and 11 guests