Efax-Gtk file search Problem

[flnx]

efax-gtk problems with mint 14 32gb linuxmint desktop systemn. i was trying to fax a pdf file but continuously got page/file errors.

socket running on port 9900
efax-0.9a: 21:11:36 failed page /home/fff/Documents/27189-A.pdf.001
efax-0.9a: 21:11:36 failed page /home/fff/Documents/27189-A.pdf.002
efax-0.9a: 21:11:36 failed page /home/fff/Documents/27189-A.pdf.003
efax-0.9a: 21:11:36 failed page /home/fff/Documents/27189-A.pdf.004
efax-0.9a: 21:11:36 failed page /home/fff/Documents/27189-A.pdf.005
efax-0.9a: 21:11:36 finished - unrecoverable error
File does not exist
Not valid file name
efax-0.9a: 21:18:21 failed page /home/fff/Documenefax-0.9a: 21:18:21 failed page /home/fff/Documents/27189-A.pdf.029
efax-0.9a: 21:18:21 finished - unrecoverable error
efax-0.9a: 21:21:05 failed page /home/fff/Documents/3300 code.pdf.001
efax-0.9a: 21:21:05 failed page /home/fff/Documents/3300 code.pdf.002
efax-0.9a: 21:21:05 finished - unrecoverable error
File does not exist
File does not exist
efax-0.9a: 21:47:22 failed page /home/fff/Documents/3300 code.pdf.001
efax-0.9a: 21:47:22 failed page /home/fff/Documents/3300 code.pdf.002
efax-0.9a: 21:47:22 finished - unrecoverable error

When I check in terminal mode, I can not see a problem there . When I dir''d the files being sent, I find the files do exist in the directory /home/fff/Documents.

fff@fff-EX310AA-ABA-SR1910NX-NA630 ~ $ dir /home/fff/Documents
2011-05-09
27189-A.pdf
3300\ code.pdf

I even took the file and put it on the desktop and then then ran send fax and it gave me same error. I also reinstalled the efax-gtk program but still got the above errors. What could be the cause and how it can be corrected? need help/support.

[flnx]

update to my post--
I also get "can not open serial port error along with lthe failed page error. My modem is a usb us robotics. I have used this modem to connect to ISP and it works fine. When I run code "sudo wvdialconf /etc/wvdial.conf" it shows:

Scanning your serial ports for a modem.
Modem Port Scan<*1>: S0 S1 S2 S3 S4 S5 S6 S7
Modem Port Scan<*1>: S8 S9 S10 S11 S12 S13 S14 S15
Modem Port Scan<*1>: S16 S17 S18 S19 S20 S21 S22 S23
Modem Port Scan<*1>: S24 S25 S26 S27 S28 S29 S30 S31
WvModem<*1>: Cannot get information for serial port.
ttyACM0<*1>: ATQ0 V1 E1 -- OK
ttyACM0<*1>: ATQ0 V1 E1 Z -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyACM0<*1>: Modem Identifier: ATI -- 5601
ttyACM0<*1>: Speed 4800: AT -- OK
ttyACM0<*1>: Speed 9600: AT -- OK
ttyACM0<*1>: Speed 19200: AT -- OK
ttyACM0<*1>: Speed 38400: AT -- OK
ttyACM0<*1>: Speed 57600: AT -- OK
ttyACM0<*1>: Speed 115200: AT -- OK
ttyACM0<*1>: Speed 230400: AT -- OK
ttyACM0<*1>: Speed 460800: AT -- OK
ttyACM0<*1>: Max speed is 460800; that should be safe.
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK

Found an USB modem on /dev/ttyACM0.
Modem configuration written to /etc/wvdial.conf.
ttyACM0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"

Which authenticates the modem is configured and works. However I only want to send faxes via efax or just dial out and no longer need to connect with ISP. Waiting for a reply for this Efax-gtk issue and thanks.

[bb333]

http://sourceforge.net/projects/efax-gt ... ic/5319134 ?

[flnx]

Yes I did check out that thread re: modem. But it did not apply to my problem, since my modem is a usb external one. Also, you will note from my thread, my modem was found and works. I also would like to bump-up my post but do not know how, since bump-up was not listed/available on this post. If you would point me to a experience modem/software person (not a newbe) that can help with this application, I would appreciate it. I only address the newbe level to detemine why no one is replying to my post. The install/boot post has been fixed by me already, an resolved as I mentioned. Thanks