I'm very new to Linux Mint 14 on my Macbook Pro 1,1 (yes I know it's almost 7 years old). These things run notoriously hot, and I have already disassembled it and cleaned out all the dust. Now I would like to mess with some fan control to cool it off.
I have the latest version of lm-sensors installed, as well as pwmconfig and fancontrol. However, I don't think these things are properly recognizing the right temperature sensors.
Below begins my long list of terminal pastes; so I apologize in advance.
Here's lspci -v (if relevant):
Code: Select all
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
Subsystem: Intel Corporation Device 7270
Flags: bus master, fast devsel, latency 0
Capabilities: <access denied>
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: 98300000-983fffff
Prefetchable memory behind bridge: 0000000080000000-000000008fffffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:07.0 Performance counters: Intel Corporation Device 27a3 (rev 03)
Flags: 66MHz, fast devsel, IRQ 10
Memory at 98404000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02)
Subsystem: SigmaTel STAC9221 HD Audio Codec
Flags: bus master, fast devsel, latency 0, IRQ 46
Memory at 98400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 98200000-982fffff
Prefetchable memory behind bridge: 0000000098500000-00000000987fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: 98100000-981fffff
Prefetchable memory behind bridge: 0000000098800000-00000000989fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=0b, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 94100000-980fffff
Prefetchable memory behind bridge: 0000000090000000-0000000093ffffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device 7270
Flags: bus master, medium devsel, latency 0, IRQ 23
I/O ports at 40a0 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device 7270
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at 4080 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device 7270
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 4060 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device 7270
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at 4040 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device 7270
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at 98405400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=32
Memory behind bridge: 94000000-940fffff
Capabilities: <access denied>
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
Subsystem: Intel Corporation Device 7270
Flags: bus master, medium devsel, latency 0
Capabilities: <access denied>
Kernel modules: leds-ss4200, lpc_ich, intel-rng
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corporation Device 7270
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at 40c0 [size=16]
Kernel driver in use: ata_piix
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Intel Corporation Device 7270
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
I/O ports at 40d8 [size=8]
I/O ports at 40f4 [size=4]
I/O ports at 40d0 [size=8]
I/O ports at 40f0 [size=4]
I/O ports at 4020 [size=16]
Memory at 98405000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02)
Subsystem: Intel Corporation Device 7270
Flags: medium devsel, IRQ 11
I/O ports at efa0 [size=32]
Kernel modules: i2c-i801
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI M56P [Radeon Mobility X1600] (prog-if 00 [VGA controller])
Subsystem: Apple Inc. MacBook Pro
Flags: bus master, fast devsel, latency 0, IRQ 45
Memory at 80000000 (32-bit, prefetchable) [size=256M]
I/O ports at 3000 [size=256]
Memory at 98300000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at 98320000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
Kernel modules: radeon
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 22)
Subsystem: Marvell Technology Group Ltd. Marvell RDK-8053
Physical Slot: 0
Flags: bus master, fast devsel, latency 0, IRQ 44
Memory at 98200000 (64-bit, non-prefetchable) [size=16K]
I/O ports at 2000 [size=256]
Expansion ROM at 98500000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: sky2
Kernel modules: sky2
03:00.0 Ethernet controller: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01)
Subsystem: Apple Inc. AR5BXB6 802.11abg Wireless Mini PCIe Card
Physical Slot: 1
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at 98100000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath5k
Kernel modules: ath5k
0c:03.0 FireWire (IEEE 1394): LSI Corporation FW322/323 [TrueFire] 1394a Controller (rev 61) (prog-if 10 [OHCI])
Subsystem: LSI Corporation FW322/323 [TrueFire] 1394a Controller
Flags: bus master, fast Back2Back, medium devsel, latency 248, IRQ 19
Memory at 94000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci
Code: Select all
Battery 0: Unknown, 98%
Code: Select all
lm63-i2c-2-4c
Adapter: Radeon i2c bit bus 0x92
temp1: -6.0°C (high = -6.0°C) ALARM (HIGH)
temp2: +0.0°C (low = +0.0°C, high = +0.0°C) ALARM (LOW, HIGH, CRIT)
(crit = -6.0°C, hyst = -256.0°C)
applesmc-isa-0300
Adapter: ISA adapter
Left side : 1578 RPM (min = 1000 RPM)
Right side : 1583 RPM (min = 1000 RPM)
TA0P: +25.5°C
TB0T: +37.0°C
TC0D: +69.8°C
TC0P: +61.0°C
TG0H: +67.5°C
TG0P: +62.2°C
TG0T: +69.5°C
Th0H: +47.0°C
Th1H: +47.8°C
Tm0P: +59.5°C
Ts0P: +40.5°C
Ts1P: +39.0°C
Also, pwmconfig returns "no usable outputs."
In addition to fan control, I would also like the CPU temp applet to work, but it returns "Error." Specifically, it's the CPU Temperature Indicator by fevimu. I feel like these two problems might be related.
Any tips? I searched around the forums but cannot find anything specific to my hardware or some similar hardware.
Thank you.