Regular screen freezes

Questions about hardware,drivers and peripherals
Forum rules
Before you post please read this

Regular screen freezes

Postby malaverdiere on Fri Feb 22, 2013 9:11 am

I have used Linux Mint 13, Linux Mint 14, and Fedora on this system, and they all exihibited the same behavior.

Sometimes, my screen freezes - no input changes anything. I am not able to switch to another terminal using ctrl-alt-F1 (or any Fn key). If I have an external keyboard plugged in at that time, its lights will start blinking continuously.

The freeze happens at various moments. The most regular case is when I touch the keyboard while the system is in sleeping mode. But it happens also that it freezes while I am typing!

I looked into syslog, and it complained a lot about irqbalance, so I removed that package, and the error persists.

The system is a Gateway NV57HO6H. Note that it is very stable under Windows.

Hardware details from hardinfo:

Code: Select all

Devices
*******


Processor
---------

-Processors-
Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz      : 2200.00MHz
Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz      : 800.00MHz
Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz      : 800.00MHz
Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz      : 800.00MHz

Memory
------

-Memory-
Total Memory      : 3899200 kB
Free Memory      : 702964 kB
Buffers      : 870360 kB
Cached      : 1113208 kB
Cached Swap      : 0 kB
Active      : 1265152 kB
Inactive      : 1458672 kB
Active(anon)      : 743972 kB
Inactive(anon)      : 58716 kB
Active(file)      : 521180 kB
Inactive(file)      : 1399956 kB
Unevictable      : 4 kB
Mlocked      : 4 kB
Virtual Memory      : 8787964 kB
Free Virtual Memory      : 8787964 kB
Dirty      : 372 kB
Writeback      : 0 kB
AnonPages      : 740044 kB
Mapped      : 129232 kB
Shmem      : 62440 kB
Slab      : 374556 kB
SReclaimable      : 294776 kB
SUnreclaim      : 79780 kB
KernelStack      : 2952 kB
PageTables      : 24132 kB
NFS_Unstable      : 0 kB
Bounce      : 0 kB
WritebackTmp      : 0 kB
CommitLimit      : 10737564 kB
Committed_AS      : 2257144 kB
VmallocTotal      : 34359738367 kB
VmallocUsed      : 563044 kB
VmallocChunk      : 34359171284 kB
HardwareCorrupted      : 0 kB
AnonHugePages      : 0 kB
HugePages_Total      : 0
HugePages_Free      : 0
HugePages_Rsvd      : 0
HugePages_Surp      : 0
Hugepagesize      : 2048 kB
DirectMap4k      : 86016 kB
DirectMap2M      : 3958784 kB

PCI Devices
-----------

-PCI Devices-
Host bridge      : Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
VGA compatible controller      : Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
Communication controller      : Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
USB controller      : Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI])
Audio device      : Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
PCI bridge      : Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) (prog-if 00 [Normal decode])
PCI bridge      : Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4) (prog-if 00 [Normal decode])
USB controller      : Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI])
ISA bridge      : Intel Corporation HM65 Express Chipset Family LPC Controller (rev 04)
SATA controller      : Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04) (prog-if 01 [AHCI 1.0])
SMBus      : Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
Ethernet controller      : Broadcom Corporation NetLink BCM57785 Gigabit Ethernet PCIe (rev 10)
SD Host controller      : Broadcom Corporation NetXtreme BCM57765 Memory Card Reader (rev 10) (prog-if 01)
System peripheral      : Broadcom Corporation Device 16be (rev 10)
System peripheral      : Broadcom Corporation Device 16bf (rev 10)
Network controller      : Intel Corporation Centrino Advanced-N 6205 (rev 34)

USB Devices
-----------


Battery
-------

-No batteries-
No batteries found on this system

Sensors
-------

-Cooling Fans-
-Temperatures-
temp1      : 53.00°C
temp2      : 50.00°C
temp3      : 50.00°C
-Voltage Values-

Input Devices
-------------

-Input Devices-
 Power Button
 Lid Switch
 Sleep Button
 Power Button
 AT Translated Set 2 keyboard
 CHESEN PS2 to USB Converter
 CHESEN PS2 to USB Converter
 2.4GHz 2way RF Receiver
 2.4GHz 2way RF Receiver
 Acer WMI hotkeys
 Acer BMA150 accelerometer
 1.3M HD WebCam
 Video Bus
 HDA Intel PCH HDMI/DP,pcm      : 3=
 HDA Intel PCH Mic
 HDA Intel PCH Headphone
 SynPS/2 Synaptics TouchPad

Storage
-------

-SCSI Disks-
ATA TOSHIBA MK6459GS
PIONEER DVD-RW DVRTD11RS

DMI
---

-BIOS-
Date      : 09/07/2011
Vendor      : Gateway
Version      : V1.14
-Board-
Name      : SJV50_HR
Vendor      : Gateway

Resources
---------

-I/O Ports-
<tt>0000-0cf7 </tt>      : PCI Bus 0000:00
<tt>  0000-001f </tt>      : dma1
<tt>  0020-0021 </tt>      : pic1
<tt>  0040-0043 </tt>      : timer0
<tt>  0050-0053 </tt>      : timer1
<tt>  0060-0060 </tt>      : keyboard
<tt>  0062-0062 </tt>      : EC data
<tt>  0064-0064 </tt>      : keyboard
<tt>  0066-0066 </tt>      : EC cmd
<tt>  0070-0077 </tt>      : rtc0
<tt>  0080-008f </tt>      : dma page reg
<tt>  00a0-00a1 </tt>      : pic2
<tt>  00c0-00df </tt>      : dma2
<tt>  00f0-00ff </tt>      : fpu
<tt>  0400-047f </tt>      : pnp 00:05
<tt>    0400-0403 </tt>      : ACPI PM1a_EVT_BLK
<tt>    0404-0405 </tt>      : ACPI PM1a_CNT_BLK
<tt>    0408-040b </tt>      : ACPI PM_TMR
<tt>    0410-0415 </tt>      : ACPI CPU throttle
<tt>    0420-042f </tt>      : ACPI GPE0_BLK
<tt>    0450-0450 </tt>      : ACPI PM2_CNT_BLK
<tt>    0454-0457 </tt>      : pnp 00:07
<tt>  0500-057f </tt>      : pnp 00:05
<tt>  0680-069f </tt>      : pnp 00:05
<tt>0cf8-0cff </tt>      : PCI conf1
<tt>0d00-ffff </tt>      : PCI Bus 0000:00
<tt>  1000-100f </tt>      : pnp 00:05
<tt>  164e-164f </tt>      : pnp 00:05
<tt>  2000-203f </tt>      : Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
<tt>  2040-205f </tt>      : Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
<tt>  2060-207f </tt>      : Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04) (prog-if 01 [AHCI 1.0])
<tt>    2060-207f </tt>      : ahci
<tt>  2080-2087 </tt>      : Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04) (prog-if 01 [AHCI 1.0])
<tt>    2080-2087 </tt>      : ahci
<tt>  2088-208f </tt>      : Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04) (prog-if 01 [AHCI 1.0])
<tt>    2088-208f </tt>      : ahci
<tt>  2098-209b </tt>      : Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04) (prog-if 01 [AHCI 1.0])
<tt>    2098-209b </tt>      : ahci
<tt>  209c-209f </tt>      : Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04) (prog-if 01 [AHCI 1.0])
<tt>    209c-209f </tt>      : ahci
<tt>  ff2c-ff2f </tt>      : pnp 00:05
<tt>  ffff-ffff </tt>      : pnp 00:05
<tt>    ffff-ffff </tt>      : pnp 00:05
-Memory-
<tt>00000000-0000ffff </tt>      : reserved
<tt>00010000-0009d7ff </tt>      : System RAM
<tt>0009d800-0009ffff </tt>      : reserved
<tt>000a0000-000bffff </tt>      : PCI Bus 0000:00
<tt>000c0000-000ce7ff </tt>      : Video ROM
<tt>000e0000-000fffff </tt>      : reserved
<tt>  000f0000-000fffff </tt>      : System ROM
<tt>00100000-a6e3efff </tt>      : System RAM
<tt>  01000000-01690841 </tt>      : Kernel code
<tt>  01690842-01cdcd7f </tt>      : Kernel data
<tt>  01dce000-01f2efff </tt>      : Kernel bss
<tt>a6e3f000-a6ebefff </tt>      : reserved
<tt>a6ebf000-a6fbefff </tt>      : ACPI Non-volatile Storage
<tt>a6fbf000-a6ffefff </tt>      : ACPI Tables
<tt>a6fff000-a6ffffff </tt>      : System RAM
<tt>a7000000-af9fffff </tt>      : reserved
<tt>afa00000-feafffff </tt>      : PCI Bus 0000:00
<tt>  afa00000-afa00fff </tt>      : pnp 00:0a
<tt>  afb00000-afbfffff </tt>      : PCI Bus 0000:02
<tt>  b0000000-bfffffff </tt>      : Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
<tt>  c0000000-c03fffff </tt>      : Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
<tt>  c0400000-c04fffff </tt>      : PCI Bus 0000:02
<tt>    c0400000-c040ffff </tt>      : Broadcom Corporation NetXtreme BCM57765 Memory Card Reader (rev 10) (prog-if 01)
<tt>      c0400000-c040ffff </tt>      : mmc0
<tt>    c0410000-c041ffff </tt>      : Broadcom Corporation Device 16be (rev 10)
<tt>    c0420000-c042ffff </tt>      : Broadcom Corporation Device 16bf (rev 10)
<tt>    c0430000-c043ffff </tt>      : Broadcom Corporation NetLink BCM57785 Gigabit Ethernet PCIe (rev 10)
<tt>      c0430000-c043ffff </tt>      : Broadcom Tigon3 ethernet driver
<tt>    c0440000-c044ffff </tt>      : Broadcom Corporation NetLink BCM57785 Gigabit Ethernet PCIe (rev 10)
<tt>      c0440000-c044ffff </tt>      : Broadcom Tigon3 ethernet driver
<tt>    c0450000-c04507ff </tt>      : Broadcom Corporation NetLink BCM57785 Gigabit Ethernet PCIe (rev 10)
<tt>  c0500000-c05fffff </tt>      : PCI Bus 0000:03
<tt>    c0500000-c0501fff </tt>      : Intel Corporation Centrino Advanced-N 6205 (rev 34)
<tt>      c0500000-c0501fff </tt>      : Intel(R) Wireless WiFi Link AGN driver for Linux
<tt>  c0600000-c0603fff </tt>      : Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
<tt>    c0600000-c0603fff </tt>      : ICH HD audio
<tt>  c0604000-c060400f </tt>      : Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
<tt>    c0604000-c060400f </tt>      : Intel(R) Management Engine Interface
<tt>  c0606000-c06060ff </tt>      : Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
<tt>  c0608000-c06087ff </tt>      : Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04) (prog-if 01 [AHCI 1.0])
<tt>    c0608000-c06087ff </tt>      : ahci
<tt>  c0609000-c06093ff </tt>      : Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI])
<tt>    c0609000-c06093ff </tt>      : ehci_hcd
<tt>  c060a000-c060a3ff </tt>      : Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI])
<tt>    c060a000-c060a3ff </tt>      : ehci_hcd
<tt>  e0000000-efffffff </tt>      : PCI MMCONFIG 0000 [bus 00-ff]
<tt>    e0000000-efffffff </tt>      : reserved
<tt>      e0000000-efffffff </tt>      : pnp 00:0a
<tt>feb00000-feb03fff </tt>      : reserved
<tt>fec00000-fec00fff </tt>      : reserved
<tt>  fec00000-fec003ff </tt>      : IOAPIC 0
<tt>fed00000-fed003ff </tt>      : HPET 0
<tt>fed10000-fed19fff </tt>      : reserved
<tt>  fed10000-fed17fff </tt>      : pnp 00:0a
<tt>  fed18000-fed18fff </tt>      : pnp 00:0a
<tt>  fed19000-fed19fff </tt>      : pnp 00:0a
<tt>fed1c000-fed1ffff </tt>      : reserved
<tt>  fed1c000-fed1ffff </tt>      : pnp 00:0a
<tt>fed20000-fed3ffff </tt>      : pnp 00:0a
<tt>fed90000-fed93fff </tt>      : pnp 00:0a
<tt>fee00000-fee00fff </tt>      : Local APIC
<tt>  fee00000-fee00fff </tt>      : reserved
<tt>ffd80000-ffffffff </tt>      : reserved
<tt>100000000-14fdfffff </tt>      : System RAM
<tt>14fe00000-14fffffff </tt>      : RAM buffer
-DMA-
<tt> 4</tt>      : cascade


Does anyone have any clue on how I can stabilize this laptop???
Marc-André Laverdière
Linux Geek, Software Engineer, Scientist
LibreOffice Hacker in his spare time
Someone who tries to liberate computres
malaverdiere
Level 1
Level 1
 
Posts: 13
Joined: Sun Mar 25, 2012 9:03 pm

Linux Mint is funded by ads and donations.
 

Re: Regular screen freezes

Postby bigj231 on Fri Feb 22, 2013 11:40 am

Flashing keyboard lights generally means a kernel panic. Try running a memtest overnight and see what you get.
Running on a 4-slot toaster @ 60Hz
User avatar
bigj231
Level 5
Level 5
 
Posts: 793
Joined: Fri Feb 26, 2010 10:16 am
Location: Middle of Nowhere

Re: Regular screen freezes

Postby malaverdiere on Sun Feb 24, 2013 8:30 am

Hello,

I did that. After 8+ hours, there were no errors detected. Any idea what other troubleshooting I can do?
Marc-André Laverdière
Linux Geek, Software Engineer, Scientist
LibreOffice Hacker in his spare time
Someone who tries to liberate computres
malaverdiere
Level 1
Level 1
 
Posts: 13
Joined: Sun Mar 25, 2012 9:03 pm

Re: Regular screen freezes

Postby bigj231 on Sun Feb 24, 2013 2:47 pm

Look at the system logs immediately after the crash and see if you can see anything there.
Running on a 4-slot toaster @ 60Hz
User avatar
bigj231
Level 5
Level 5
 
Posts: 793
Joined: Fri Feb 26, 2010 10:16 am
Location: Middle of Nowhere

Re: Regular screen freezes

Postby malaverdiere on Mon Feb 25, 2013 9:49 am

I have tried with the Linux kernel offered by Mint, as well as 3.6.3 and 3.8.0 from upstream's kernel PPA, and it keeps on happening.

In this latest freeze, the system had the lid closed and was on the power overnight. When opening the lid and plugging in the external keyboard, I noticed that the lights were blinking and the system would not resume from sleep.

Here is the information I am ble to get from the main log files.

In syslog:
Code: Select all
Feb 25 07:35:13 redemption rsyslogd: [origin software="rsyslogd" swVersion="5.8.6" x-pid="843" x-info="http://www.rsyslog.com"] rsyslogd was HUPed
Feb 25 07:38:56 redemption wpa_supplicant[914]: wlan0: WPA: Group rekeying completed with 00:23:51:50:23:29 [GTK=CCMP]
Feb 25 07:39:23 redemption anacron[3878]: Job `cron.daily' terminated
Feb 25 07:40:01 redemption anacron[3878]: Job `cron.weekly' started
Feb 25 07:40:01 redemption anacron[4172]: Updated timestamp for job `cron.weekly' to 2013-02-25
Feb 25 07:40:57 redemption anacron[3878]: Job `cron.weekly' terminated
Feb 25 07:40:57 redemption anacron[3878]: Normal exit (2 jobs run)


Code: Select all
Feb 24 20:05:07 redemption kernel: [   31.894505] wlan0: authenticated
Feb 24 20:05:07 redemption kernel: [   31.894720] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
Feb 24 20:05:07 redemption kernel: [   31.894726] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
Feb 24 20:05:07 redemption kernel: [   31.895856] wlan0: associate with 00:23:51:50:23:29 (try 1/3)
Feb 24 20:05:07 redemption kernel: [   31.910254] wlan0: RX AssocResp from 00:23:51:50:23:29 (capab=0x431 status=0 aid=4)
Feb 24 20:05:07 redemption kernel: [   31.934145] wlan0: associated
Feb 24 20:05:07 redemption kernel: [   31.934211] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Feb 24 20:05:07 redemption kernel: [   31.934268] cfg80211: Calling CRDA for country: US
Feb 24 20:05:07 redemption kernel: [   31.937328] cfg80211: Regulatory domain changed to country: US
Feb 24 20:05:07 redemption kernel: [   31.937331] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Feb 24 20:05:07 redemption kernel: [   31.937333] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
Feb 24 20:05:07 redemption kernel: [   31.937335] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
Feb 24 20:05:07 redemption kernel: [   31.937336] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Feb 24 20:05:07 redemption kernel: [   31.937338] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Feb 24 20:05:07 redemption kernel: [   31.937339] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Feb 24 20:05:07 redemption kernel: [   31.937341] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
Feb 24 23:12:41 redemption kernel: [11273.756050] hda-intel 0000:00:1b.0: Unstable LPIB (65534 >= 32768); disabling LPIB delay counting


The end of dmesg.0
Code: Select all
[   21.879208] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[   21.879303] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   21.879710] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   21.969966] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   21.970094] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   21.970182] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   22.593670] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400, board id: 1694, fw id: 705179
[   22.743390] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
[   23.985942] init: failsafe main process (751) killed by TERM signal
[   24.040406] tg3 0000:02:00.0: irq 45 for MSI/MSI-X
[   24.040424] tg3 0000:02:00.0: irq 46 for MSI/MSI-X
[   24.040432] tg3 0000:02:00.0: irq 47 for MSI/MSI-X
[   24.040439] tg3 0000:02:00.0: irq 48 for MSI/MSI-X
[   24.040447] tg3 0000:02:00.0: irq 49 for MSI/MSI-X
[   24.511433] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   24.513440] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[   24.520116] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[   24.891132] ppdev: user-space parallel port driver
[   24.910247] Bluetooth: Core ver 2.16
[   24.910268] NET: Registered protocol family 31
[   24.910270] Bluetooth: HCI device and connection manager initialized
[   24.910278] Bluetooth: HCI socket layer initialized
[   24.910282] Bluetooth: L2CAP socket layer initialized
[   24.910292] Bluetooth: SCO socket layer initialized
[   24.919024] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[   24.925719] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   24.925722] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[   24.925725] Bluetooth: BNEP filters: protocol multicast
[   24.925733] Bluetooth: BNEP socket layer initialized
[   25.044397] Bluetooth: RFCOMM TTY layer initialized
[   25.044410] Bluetooth: RFCOMM socket layer initialized
[   25.044411] Bluetooth: RFCOMM ver 1.11
[   25.145353] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   25.607695] init: alsa-restore main process (1076) terminated with status 99
[   25.614495] init: irqbalance main process (1073) terminated with status 127


And here is the Xorg.0.log file
Code: Select all
[    25.691]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[    25.691] X Protocol Version 11, Revision 0
[    25.691] Build Operating System: Linux 3.2.0-32-generic x86_64 Ubuntu
[    25.691] Current Operating System: Linux redemption 3.8.0-030800-generic #201302181935 SMP Tue Feb 19 00:36:19 UTC 2013 x86_64
[    25.691] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-030800-generic root=UUID=3f326431-6c83-4768-b929-65ab119ccaa4 ro quiet splash vt.handoff=7
[    25.691] Build Date: 27 November 2012  07:44:35AM
[    25.691] xorg-server 2:1.13.0-0ubuntu6.1 (For technical support please see http://www.ubuntu.com/support)
[    25.691] Current version of pixman: 0.26.0
[    25.691]    Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
[    25.691] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    25.692] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb 24 20:05:01 2013
[    25.713] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    25.713] (==) No Layout section.  Using the first Screen section.
[    25.713] (==) No screen section available. Using defaults.
[    25.713] (**) |-->Screen "Default Screen Section" (0)
[    25.713] (**) |   |-->Monitor "<default monitor>"
[    25.713] (==) No monitor specified for screen "Default Screen Section".
   Using a default monitor configuration.
[    25.713] (==) Automatically adding devices
[    25.713] (==) Automatically enabling devices
[    25.713] (==) Automatically adding GPU devices
[    25.713] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    25.713]    Entry deleted from font path.
[    25.713] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    25.713]    Entry deleted from font path.
[    25.713] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    25.713]    Entry deleted from font path.
[    25.714] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    25.714]    Entry deleted from font path.
[    25.714] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    25.714]    Entry deleted from font path.
[    25.714] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    25.714]    Entry deleted from font path.
[    25.714] (==) FontPath set to:
   /usr/share/fonts/X11/misc,
   /usr/share/fonts/X11/Type1,
   built-ins
[    25.714] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    25.714] (II) The server relies on udev to provide the list of input devices.
   If no devices become available, reconfigure udev or disable AutoAddDevices.
[    25.714] (II) Loader magic: 0x7f182bec8c40
[    25.714] (II) Module ABI versions:
[    25.714]    X.Org ANSI C Emulation: 0.4
[    25.714]    X.Org Video Driver: 13.0
[    25.714]    X.Org XInput driver : 18.0
[    25.714]    X.Org Server Extension : 7.0
[    25.714] (II) config/udev: Adding drm device (/dev/dri/card0)
[    25.716] (--) PCI:*(0:0:2:0) 8086:0116:1025:0511 rev 9, Mem @ 0xc0000000/4194304, 0xb0000000/268435456, I/O @ 0x00002000/64
[    25.716] (II) Open ACPI successful (/var/run/acpid.socket)
[    25.716] Initializing built-in extension Generic Event Extension
[    25.716] Initializing built-in extension SHAPE
[    25.716] Initializing built-in extension MIT-SHM
[    25.716] Initializing built-in extension XInputExtension
[    25.716] Initializing built-in extension XTEST
[    25.716] Initializing built-in extension BIG-REQUESTS
[    25.716] Initializing built-in extension SYNC
[    25.716] Initializing built-in extension XKEYBOARD
[    25.716] Initializing built-in extension XC-MISC
[    25.716] Initializing built-in extension SECURITY
[    25.716] Initializing built-in extension XINERAMA
[    25.716] Initializing built-in extension XFIXES
[    25.716] Initializing built-in extension RENDER
[    25.716] Initializing built-in extension RANDR
[    25.716] Initializing built-in extension COMPOSITE
[    25.716] Initializing built-in extension DAMAGE
[    25.716] Initializing built-in extension MIT-SCREEN-SAVER
[    25.716] Initializing built-in extension DOUBLE-BUFFER
[    25.716] Initializing built-in extension RECORD
[    25.716] Initializing built-in extension DPMS
[    25.716] Initializing built-in extension X-Resource
[    25.716] Initializing built-in extension XVideo
[    25.716] Initializing built-in extension XVideo-MotionCompensation
[    25.716] Initializing built-in extension XFree86-VidModeExtension
[    25.716] Initializing built-in extension XFree86-DGA
[    25.716] Initializing built-in extension XFree86-DRI
[    25.716] Initializing built-in extension DRI2
[    25.716] (II) LoadModule: "glx"
[    25.743] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    25.743] (II) Module glx: vendor="X.Org Foundation"
[    25.743]    compiled for 1.13.0, module version = 1.0.0
[    25.743]    ABI class: X.Org Server Extension, version 7.0
[    25.744] (==) AIGLX enabled
[    25.744] Loading extension GLX
[    25.744] (==) Matched intel as autoconfigured driver 0
[    25.744] (==) Matched intel as autoconfigured driver 1
[    25.744] (==) Matched vesa as autoconfigured driver 2
[    25.744] (==) Matched modesetting as autoconfigured driver 3
[    25.744] (==) Matched fbdev as autoconfigured driver 4
[    25.744] (==) Assigned the driver to the xf86ConfigLayout
[    25.744] (II) LoadModule: "intel"
[    25.744] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    25.744] (II) Module intel: vendor="X.Org Foundation"
[    25.744]    compiled for 1.13.0, module version = 2.20.9
[    25.744]    Module class: X.Org Video Driver
[    25.744]    ABI class: X.Org Video Driver, version 13.0
[    25.744] (II) LoadModule: "vesa"
[    25.744] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    25.744] (II) Module vesa: vendor="X.Org Foundation"
[    25.744]    compiled for 1.12.99.902, module version = 2.3.2
[    25.744]    Module class: X.Org Video Driver
[    25.744]    ABI class: X.Org Video Driver, version 13.0
[    25.744] (II) LoadModule: "modesetting"
[    25.744] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    25.744] (II) Module modesetting: vendor="X.Org Foundation"
[    25.744]    compiled for 1.13.0, module version = 0.5.0
[    25.744]    Module class: X.Org Video Driver
[    25.745]    ABI class: X.Org Video Driver, version 13.0
[    25.745] (II) LoadModule: "fbdev"
[    25.745] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    25.745] (II) Module fbdev: vendor="X.Org Foundation"
[    25.745]    compiled for 1.12.99.902, module version = 0.4.3
[    25.745]    Module class: X.Org Video Driver
[    25.745]    ABI class: X.Org Video Driver, version 13.0
[    25.745] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
   i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
   E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
   965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
   4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
   Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
   Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
   Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
   Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
   Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
   Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
   Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
   Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
   Haswell Server (GT2+), Haswell SDV Desktop (GT1),
   Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
   Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
   Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
   Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
   Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
   Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
   Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
   Haswell ULT Server (GT1), Haswell ULT Server (GT2),
   Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
   Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
   Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
   Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
   Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
   ValleyView PO board
[    25.745] (II) VESA: driver for VESA chipsets: vesa
[    25.745] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    25.745] (II) FBDEV: driver for framebuffer: fbdev
[    25.745] (++) using VT number 8
[    25.748] (II) intel(0): using device path '/dev/dri/card0'
[    25.748] (WW) Falling back to old probe method for vesa
[    25.748] (WW) Falling back to old probe method for modesetting
[    25.748] (WW) Falling back to old probe method for fbdev
[    25.748] (II) Loading sub module "fbdevhw"
[    25.748] (II) LoadModule: "fbdevhw"
[    25.748] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    25.748] (II) Module fbdevhw: vendor="X.Org Foundation"
[    25.748]    compiled for 1.13.0, module version = 0.0.2
[    25.748]    ABI class: X.Org Video Driver, version 13.0
[    25.749] (II) intel(0): Creating default Display subsection in Screen section
   "Default Screen Section" for depth/fbbpp 24/32
[    25.749] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    25.749] (==) intel(0): RGB weight 888
[    25.749] (==) intel(0): Default visual is TrueColor
[    25.749] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2)
[    25.749] (**) intel(0): Relaxed fencing enabled
[    25.749] (**) intel(0): Wait on SwapBuffers? enabled
[    25.749] (**) intel(0): Triple buffering? enabled
[    25.749] (**) intel(0): Framebuffer tiled
[    25.749] (**) intel(0): Pixmaps tiled
[    25.749] (**) intel(0): 3D buffers tiled
[    25.749] (**) intel(0): SwapBuffers wait enabled
[    25.749] (==) intel(0): video overlay key set to 0x101fe
[    25.749] (II) intel(0): Output LVDS1 has no monitor section
[    25.848] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[    25.864] (II) intel(0): Output VGA1 has no monitor section
[    25.880] (II) intel(0): Output HDMI1 has no monitor section
[    25.928] (II) intel(0): Output DP1 has no monitor section
[    25.928] (II) intel(0): EDID for output LVDS1
[    25.928] (II) intel(0): Manufacturer: AUO  Model: 26ec  Serial#: 0
[    25.928] (II) intel(0): Year: 2009  Week: 1
[    25.928] (II) intel(0): EDID Version: 1.3
[    25.928] (II) intel(0): Digital Display Input
[    25.928] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    25.928] (II) intel(0): Gamma: 2.20
[    25.928] (II) intel(0): No DPMS capabilities specified
[    25.928] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    25.928] (II) intel(0): First detailed timing is preferred mode
[    25.928] (II) intel(0): redX: 0.577 redY: 0.333   greenX: 0.333 greenY: 0.554
[    25.928] (II) intel(0): blueX: 0.161 blueY: 0.144   whiteX: 0.313 whiteY: 0.329
[    25.928] (II) intel(0): Manufacturer's mask: 0
[    25.928] (II) intel(0): Supported detailed timing:
[    25.928] (II) intel(0): clock: 71.8 MHz   Image Size:  344 x 193 mm
[    25.928] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1526 h_border: 0
[    25.928] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 784 v_border: 0
[    25.928] (II) intel(0): Unknown vendor-specific block f
[    25.928] (II) intel(0):  AUO
[    25.928] (II) intel(0):  B156XW02 V6
[    25.928] (II) intel(0): EDID (in hex):
[    25.928] (II) intel(0):    00ffffffffffff0006afec2600000000
[    25.928] (II) intel(0):    01130103802213780ad7759355558d29
[    25.928] (II) intel(0):    24505400000001010101010101010101
[    25.928] (II) intel(0):    0101010101010c1c56a0500010303020
[    25.928] (II) intel(0):    360058c1100000180000000f00000000
[    25.928] (II) intel(0):    00000000000000000020000000fe0041
[    25.928] (II) intel(0):    554f0a202020202020202020000000fe
[    25.928] (II) intel(0):    004231353658573032205636200a0065
[    25.928] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    25.928] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    25.928] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    25.928] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    25.928] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    25.928] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    25.928] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    25.928] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    25.928] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    25.928] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    25.928] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    25.928] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    25.928] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    25.928] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    25.928] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    25.928] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    25.928] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    25.928] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    25.928] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    25.928] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[    25.928] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    25.928] (II) intel(0): Printing probed modes for output LVDS1
[    25.928] (II) intel(0): Modeline "1366x768"x60.0   71.80  1366 1414 1446 1526  768 771 777 784 -hsync -vsync (47.1 kHz eP)
[    25.928] (II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    25.928] (II) intel(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    25.928] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    25.928] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    25.928] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    25.928] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    25.944] (II) intel(0): EDID for output VGA1
[    25.960] (II) intel(0): EDID for output HDMI1
[    26.008] (II) intel(0): EDID for output DP1
[    26.008] (II) intel(0): Output LVDS1 connected
[    26.008] (II) intel(0): Output VGA1 disconnected
[    26.008] (II) intel(0): Output HDMI1 disconnected
[    26.008] (II) intel(0): Output DP1 disconnected
[    26.008] (II) intel(0): Using exact sizes for initial modes
[    26.008] (II) intel(0): Output LVDS1 using initial mode 1366x768
[    26.008] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    26.008] (II) intel(0): Kernel page flipping support detected, enabling
[    26.008] (==) intel(0): DPI set to (96, 96)
[    26.008] (II) Loading sub module "fb"
[    26.008] (II) LoadModule: "fb"
[    26.008] (II) Loading /usr/lib/xorg/modules/libfb.so
[    26.008] (II) Module fb: vendor="X.Org Foundation"
[    26.008]    compiled for 1.13.0, module version = 1.0.0
[    26.008]    ABI class: X.Org ANSI C Emulation, version 0.4
[    26.008] (II) Loading sub module "dri2"
[    26.008] (II) LoadModule: "dri2"
[    26.008] (II) Module "dri2" already built-in
[    26.008] (II) UnloadModule: "vesa"
[    26.008] (II) Unloading vesa
[    26.008] (II) UnloadModule: "modesetting"
[    26.008] (II) Unloading modesetting
[    26.008] (II) UnloadModule: "fbdev"
[    26.008] (II) Unloading fbdev
[    26.008] (II) UnloadSubModule: "fbdevhw"
[    26.008] (II) Unloading fbdevhw
[    26.008] (==) Depth 24 pixmap format is 32 bpp
[    26.008] (II) intel(0): [DRI2] Setup complete
[    26.008] (II) intel(0): [DRI2]   DRI driver: i965
[    26.008] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[    26.009] (II) UXA(0): Driver registered support for the following operations:
[    26.009] (II)         solid
[    26.009] (II)         copy
[    26.009] (II)         composite (RENDER acceleration)
[    26.009] (II)         put_image
[    26.009] (II)         get_image
[    26.009] (==) intel(0): Backing store disabled
[    26.009] (==) intel(0): Silken mouse enabled
[    26.009] (II) intel(0): Initializing HW Cursor
[    26.009] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    26.010] (==) intel(0): DPMS enabled
[    26.010] (==) intel(0): Intel XvMC decoder enabled
[    26.010] (II) intel(0): Set up textured video
[    26.010] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    26.010] (II) intel(0): direct rendering: DRI2 Enabled
[    26.010] (==) intel(0): hotplug detection: "enabled"
[    26.020] (--) RandR disabled
[    26.029] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    26.029] (II) AIGLX: enabled GLX_INTEL_swap_event
[    26.029] (II) AIGLX: enabled GLX_ARB_create_context
[    26.029] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    26.029] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    26.029] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    26.029] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    26.029] (II) AIGLX: Loaded and initialized i965
[    26.029] (II) GLX: Initialized DRI2 GL provider for screen 0
[    26.029] (II) intel(0): Setting screen physical size to 361 x 203
[    26.037] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    26.039] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    26.039] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    26.039] (II) LoadModule: "evdev"
[    26.039] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    26.039] (II) Module evdev: vendor="X.Org Foundation"
[    26.039]    compiled for 1.13.0, module version = 2.7.3
[    26.039]    Module class: X.Org XInput Driver
[    26.039]    ABI class: X.Org XInput driver, version 18.0
[    26.039] (II) Using input driver 'evdev' for 'Power Button'
[    26.039] (**) Power Button: always reports core events
[    26.039] (**) evdev: Power Button: Device: "/dev/input/event3"
[    26.039] (--) evdev: Power Button: Vendor 0 Product 0x1
[    26.039] (--) evdev: Power Button: Found keys
[    26.039] (II) evdev: Power Button: Configuring as keyboard
[    26.039] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    26.039] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    26.039] (**) Option "xkb_rules" "evdev"
[    26.039] (**) Option "xkb_model" "pc105"
[    26.039] (**) Option "xkb_layout" "us"
[    26.040] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[    26.040] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    26.040] (II) Using input driver 'evdev' for 'Video Bus'
[    26.040] (**) Video Bus: always reports core events
[    26.040] (**) evdev: Video Bus: Device: "/dev/input/event8"
[    26.040] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    26.040] (--) evdev: Video Bus: Found keys
[    26.040] (II) evdev: Video Bus: Configuring as keyboard
[    26.040] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8/event8"
[    26.040] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    26.040] (**) Option "xkb_rules" "evdev"
[    26.040] (**) Option "xkb_model" "pc105"
[    26.040] (**) Option "xkb_layout" "us"
[    26.040] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    26.040] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    26.040] (II) Using input driver 'evdev' for 'Power Button'
[    26.040] (**) Power Button: always reports core events
[    26.040] (**) evdev: Power Button: Device: "/dev/input/event0"
[    26.040] (--) evdev: Power Button: Vendor 0 Product 0x1
[    26.040] (--) evdev: Power Button: Found keys
[    26.040] (II) evdev: Power Button: Configuring as keyboard
[    26.040] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0/event0"
[    26.040] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    26.040] (**) Option "xkb_rules" "evdev"
[    26.040] (**) Option "xkb_model" "pc105"
[    26.040] (**) Option "xkb_layout" "us"
[    26.041] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    26.041] (II) No input driver specified, ignoring this device.
[    26.041] (II) This device may have been added with another device file.
[    26.041] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    26.041] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    26.041] (II) Using input driver 'evdev' for 'Sleep Button'
[    26.041] (**) Sleep Button: always reports core events
[    26.041] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[    26.041] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    26.041] (--) evdev: Sleep Button: Found keys
[    26.041] (II) evdev: Sleep Button: Configuring as keyboard
[    26.041] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input2/event2"
[    26.041] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    26.041] (**) Option "xkb_rules" "evdev"
[    26.041] (**) Option "xkb_model" "pc105"
[    26.041] (**) Option "xkb_layout" "us"
[    26.041] (II) config/udev: Adding drm device (/dev/dri/card0)
[    26.042] (II) config/udev: Adding input device 1.3M HD WebCam (/dev/input/event7)
[    26.042] (**) 1.3M HD WebCam: Applying InputClass "evdev keyboard catchall"
[    26.042] (II) Using input driver 'evdev' for '1.3M HD WebCam'
[    26.042] (**) 1.3M HD WebCam: always reports core events
[    26.042] (**) evdev: 1.3M HD WebCam: Device: "/dev/input/event7"
[    26.042] (--) evdev: 1.3M HD WebCam: Vendor 0x1bcf Product 0x288a
[    26.042] (--) evdev: 1.3M HD WebCam: Found keys
[    26.042] (II) evdev: 1.3M HD WebCam: Configuring as keyboard
[    26.042] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input7/event7"
[    26.042] (II) XINPUT: Adding extended input device "1.3M HD WebCam" (type: KEYBOARD, id 10)
[    26.042] (**) Option "xkb_rules" "evdev"
[    26.042] (**) Option "xkb_model" "pc105"
[    26.042] (**) Option "xkb_layout" "us"
[    26.042] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[    26.042] (II) No input driver specified, ignoring this device.
[    26.042] (II) This device may have been added with another device file.
[    26.042] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[    26.043] (II) No input driver specified, ignoring this device.
[    26.043] (II) This device may have been added with another device file.
[    26.043] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event9)
[    26.043] (II) No input driver specified, ignoring this device.
[    26.043] (II) This device may have been added with another device file.
[    26.043] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[    26.043] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    26.043] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    26.043] (**) AT Translated Set 2 keyboard: always reports core events
[    26.043] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[    26.043] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    26.043] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    26.043] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    26.043] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[    26.043] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[    26.043] (**) Option "xkb_rules" "evdev"
[    26.043] (**) Option "xkb_model" "pc105"
[    26.043] (**) Option "xkb_layout" "us"
[    26.043] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event12)
[    26.043] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    26.043] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    26.043] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    26.044] (II) LoadModule: "synaptics"
[    26.044] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    26.044] (II) Module synaptics: vendor="X.Org Foundation"
[    26.044]    compiled for 1.12.99.905, module version = 1.6.2
[    26.044]    Module class: X.Org XInput Driver
[    26.044]    ABI class: X.Org XInput driver, version 18.0
[    26.044] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    26.044] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    26.044] (**) Option "Device" "/dev/input/event12"
[    26.068] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[    26.068] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5774
[    26.068] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5022
[    26.068] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    26.068] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    26.068] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    26.068] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    26.068] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    26.068] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    26.076] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input12/event12"
[    26.110] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[    26.110] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    26.110] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    26.110] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
[    26.110] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    26.110] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    26.110] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    26.110] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    26.110] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    26.110] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    26.110] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    26.112] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event5)
[    26.112] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    26.112] (II) Using input driver 'evdev' for 'Acer WMI hotkeys'
[    26.112] (**) Acer WMI hotkeys: always reports core events
[    26.112] (**) evdev: Acer WMI hotkeys: Device: "/dev/input/event5"
[    26.112] (--) evdev: Acer WMI hotkeys: Vendor 0 Product 0
[    26.112] (--) evdev: Acer WMI hotkeys: Found keys
[    26.112] (II) evdev: Acer WMI hotkeys: Configuring as keyboard
[    26.112] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event5"
[    26.112] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 13)
[    26.112] (**) Option "xkb_rules" "evdev"
[    26.112] (**) Option "xkb_model" "pc105"
[    26.112] (**) Option "xkb_layout" "us"
[    26.112] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event6)
[    26.112] (II) No input driver specified, ignoring this device.
[    26.112] (II) This device may have been added with another device file.
[    26.113] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0)
[    26.113] (II) No input driver specified, ignoring this device.
[    26.113] (II) This device may have been added with another device file.
[  4795.444] (II) intel(0): EDID vendor "AUO", prod id 9964
[  4795.444] (II) intel(0): Printing DDC gathered Modelines:
[  4795.444] (II) intel(0): Modeline "1366x768"x0.0   71.80  1366 1414 1446 1526  768 771 777 784 -hsync -vsync (47.1 kHz eP)
[  4797.453] (II) XKB: reuse xkmfile /var/lib/xkb/server-C167E0D396CEA5B5A6A913CB2E367E1E00A27666.xkm
[  4797.849] (II) intel(0): EDID vendor "AUO", prod id 9964
[  4797.849] (II) intel(0): Printing DDC gathered Modelines:
[  4797.849] (II) intel(0): Modeline "1366x768"x0.0   71.80  1366 1414 1446 1526  768 771 777 784 -hsync -vsync (47.1 kHz eP)
[ 13072.333] (II) PM Event received: Capability Changed
[ 13072.333] I830PMEvent: Capability change


I am not seeing anything obviously wrong - any idea???
Marc-André Laverdière
Linux Geek, Software Engineer, Scientist
LibreOffice Hacker in his spare time
Someone who tries to liberate computres
malaverdiere
Level 1
Level 1
 
Posts: 13
Joined: Sun Mar 25, 2012 9:03 pm

Re: Regular screen freezes

Postby malaverdiere on Mon Feb 25, 2013 11:16 am

Got another freeze. This time, while typing!

Kernel.log: None of this is right before the crash
Code: Select all
Feb 25 08:20:20 redemption kernel: [   32.613713] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
Feb 25 08:20:20 redemption kernel: [   32.613716] cfg80211: Regulatory domain changed to country: US
Feb 25 08:20:20 redemption kernel: [   32.613717] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Feb 25 08:20:20 redemption kernel: [   32.613719] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
Feb 25 08:20:20 redemption kernel: [   32.613721] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
Feb 25 08:20:20 redemption kernel: [   32.613722] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Feb 25 08:20:20 redemption kernel: [   32.613724] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Feb 25 08:20:20 redemption kernel: [   32.613725] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Feb 25 08:20:20 redemption kernel: [   32.613727] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
Feb 25 08:21:02 redemption kernel: [   73.976519] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
Feb 25 08:21:02 redemption kernel: [   73.994434] JFS: nTxBlock = 8192, nTxLock = 65536
Feb 25 08:21:02 redemption kernel: [   74.036506] NTFS driver 2.1.30 [Flags: R/O MODULE].
Feb 25 08:21:02 redemption kernel: [   74.092656] QNX4 filesystem 0.2.3 registered.
Feb 25 08:21:02 redemption kernel: [   74.206114] Btrfs loaded
Feb 25 09:53:21 redemption kernel: [ 5606.899830] usb 2-1.3: USB disconnect, device number 8
Feb 25 09:53:22 redemption kernel: [ 5608.178420] usb 2-1.1: USB disconnect, device number 3


Syslog:
Code: Select all
Feb 25 08:23:41 redemption macosx-prober: debug: /dev/sda7 is not an HFS+ partition: exiting
Feb 25 08:23:41 redemption os-prober: debug: running /usr/lib/os-probes/mounted/20microsoft on mounted /dev/sda7
Feb 25 08:23:41 redemption 20microsoft: debug: /dev/sda7 is not a MS partition: exiting
Feb 25 08:23:41 redemption os-prober: debug: running /usr/lib/os-probes/mounted/30utility on mounted /dev/sda7
Feb 25 08:23:41 redemption 30utility: debug: /dev/sda7 is not a FAT partition: exiting
Feb 25 08:23:41 redemption os-prober: debug: running /usr/lib/os-probes/mounted/40lsb on mounted /dev/sda7
Feb 25 08:23:41 redemption os-prober: debug: running /usr/lib/os-probes/mounted/70hurd on mounted /dev/sda7
Feb 25 08:23:41 redemption os-prober: debug: running /usr/lib/os-probes/mounted/80minix on mounted /dev/sda7
Feb 25 08:23:41 redemption os-prober: debug: running /usr/lib/os-probes/mounted/83haiku on mounted /dev/sda7
Feb 25 08:23:41 redemption 83haiku: debug: /dev/sda7 is not a BeFS partition: exiting
Feb 25 08:23:41 redemption os-prober: debug: running /usr/lib/os-probes/mounted/90linux-distro on mounted /dev/sda7
Feb 25 08:23:41 redemption os-prober: debug: running /usr/lib/os-probes/mounted/90solaris on mounted /dev/sda7
Feb 25 08:54:57 redemption wpa_supplicant[906]: wlan0: WPA: Group rekeying completed with 00:23:51:50:23:29 [GTK=CCMP]
Feb 25 09:17:01 redemption CRON[9556]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Feb 25 09:53:21 redemption kernel: [ 5606.899830] usb 2-1.3: USB disconnect, device number 8
Feb 25 09:53:22 redemption kernel: [ 5608.178420] usb 2-1.1: USB disconnect, device number 3
Feb 25 09:54:57 redemption wpa_supplicant[906]: wlan0: WPA: Group rekeying completed with 00:23:51:50:23:29 [GTK=CCMP]


Xorg.0.log.old
Code: Select all
[    26.341]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[    26.341] X Protocol Version 11, Revision 0
[    26.341] Build Operating System: Linux 3.2.0-32-generic x86_64 Ubuntu
[    26.341] Current Operating System: Linux redemption 3.5.0-25-generic #38-Ubuntu SMP Mon Feb 18 23:27:42 UTC 2013 x86_64
[    26.341] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-25-generic root=UUID=3f326431-6c83-4768-b929-65ab119ccaa4 ro quiet splash vt.handoff=7
[    26.341] Build Date: 27 November 2012  07:44:35AM
[    26.341] xorg-server 2:1.13.0-0ubuntu6.1 (For technical support please see http://www.ubuntu.com/support)
[    26.341] Current version of pixman: 0.26.0
[    26.341]    Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
[    26.341] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    26.341] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb 25 08:20:14 2013
[    26.357] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    26.358] (==) No Layout section.  Using the first Screen section.
[    26.358] (==) No screen section available. Using defaults.
[    26.358] (**) |-->Screen "Default Screen Section" (0)
[    26.358] (**) |   |-->Monitor "<default monitor>"
[    26.358] (==) No monitor specified for screen "Default Screen Section".
   Using a default monitor configuration.
[    26.358] (==) Automatically adding devices
[    26.358] (==) Automatically enabling devices
[    26.358] (==) Automatically adding GPU devices
[    26.358] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    26.358]    Entry deleted from font path.
[    26.358] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    26.358]    Entry deleted from font path.
[    26.358] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    26.358]    Entry deleted from font path.
[    26.358] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    26.358]    Entry deleted from font path.
[    26.358] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    26.358]    Entry deleted from font path.
[    26.358] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    26.358]    Entry deleted from font path.
[    26.358] (==) FontPath set to:
   /usr/share/fonts/X11/misc,
   /usr/share/fonts/X11/Type1,
   built-ins
[    26.358] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    26.358] (II) The server relies on udev to provide the list of input devices.
   If no devices become available, reconfigure udev or disable AutoAddDevices.
[    26.358] (II) Loader magic: 0x7f14c6a1ac40
[    26.358] (II) Module ABI versions:
[    26.358]    X.Org ANSI C Emulation: 0.4
[    26.358]    X.Org Video Driver: 13.0
[    26.358]    X.Org XInput driver : 18.0
[    26.358]    X.Org Server Extension : 7.0
[    26.358] (II) config/udev: Adding drm device (/dev/dri/card0)
[    26.360] (--) PCI:*(0:0:2:0) 8086:0116:1025:0511 rev 9, Mem @ 0xc0000000/4194304, 0xb0000000/268435456, I/O @ 0x00002000/64
[    26.360] (II) Open ACPI successful (/var/run/acpid.socket)
[    26.360] Initializing built-in extension Generic Event Extension
[    26.360] Initializing built-in extension SHAPE
[    26.360] Initializing built-in extension MIT-SHM
[    26.360] Initializing built-in extension XInputExtension
[    26.360] Initializing built-in extension XTEST
[    26.360] Initializing built-in extension BIG-REQUESTS
[    26.360] Initializing built-in extension SYNC
[    26.360] Initializing built-in extension XKEYBOARD
[    26.360] Initializing built-in extension XC-MISC
[    26.360] Initializing built-in extension SECURITY
[    26.360] Initializing built-in extension XINERAMA
[    26.360] Initializing built-in extension XFIXES
[    26.360] Initializing built-in extension RENDER
[    26.360] Initializing built-in extension RANDR
[    26.360] Initializing built-in extension COMPOSITE
[    26.360] Initializing built-in extension DAMAGE
[    26.360] Initializing built-in extension MIT-SCREEN-SAVER
[    26.360] Initializing built-in extension DOUBLE-BUFFER
[    26.360] Initializing built-in extension RECORD
[    26.360] Initializing built-in extension DPMS
[    26.360] Initializing built-in extension X-Resource
[    26.360] Initializing built-in extension XVideo
[    26.360] Initializing built-in extension XVideo-MotionCompensation
[    26.360] Initializing built-in extension XFree86-VidModeExtension
[    26.360] Initializing built-in extension XFree86-DGA
[    26.360] Initializing built-in extension XFree86-DRI
[    26.360] Initializing built-in extension DRI2
[    26.360] (II) LoadModule: "glx"
[    26.387] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    26.388] (II) Module glx: vendor="X.Org Foundation"
[    26.388]    compiled for 1.13.0, module version = 1.0.0
[    26.388]    ABI class: X.Org Server Extension, version 7.0
[    26.388] (==) AIGLX enabled
[    26.388] Loading extension GLX
[    26.388] (==) Matched intel as autoconfigured driver 0
[    26.388] (==) Matched intel as autoconfigured driver 1
[    26.388] (==) Matched vesa as autoconfigured driver 2
[    26.388] (==) Matched modesetting as autoconfigured driver 3
[    26.388] (==) Matched fbdev as autoconfigured driver 4
[    26.388] (==) Assigned the driver to the xf86ConfigLayout
[    26.388] (II) LoadModule: "intel"
[    26.388] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    26.388] (II) Module intel: vendor="X.Org Foundation"
[    26.388]    compiled for 1.13.0, module version = 2.20.9
[    26.388]    Module class: X.Org Video Driver
[    26.388]    ABI class: X.Org Video Driver, version 13.0
[    26.388] (II) LoadModule: "vesa"
[    26.388] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    26.388] (II) Module vesa: vendor="X.Org Foundation"
[    26.388]    compiled for 1.12.99.902, module version = 2.3.2
[    26.388]    Module class: X.Org Video Driver
[    26.388]    ABI class: X.Org Video Driver, version 13.0
[    26.388] (II) LoadModule: "modesetting"
[    26.389] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    26.389] (II) Module modesetting: vendor="X.Org Foundation"
[    26.389]    compiled for 1.13.0, module version = 0.5.0
[    26.389]    Module class: X.Org Video Driver
[    26.389]    ABI class: X.Org Video Driver, version 13.0
[    26.389] (II) LoadModule: "fbdev"
[    26.389] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    26.389] (II) Module fbdev: vendor="X.Org Foundation"
[    26.389]    compiled for 1.12.99.902, module version = 0.4.3
[    26.389]    Module class: X.Org Video Driver
[    26.389]    ABI class: X.Org Video Driver, version 13.0
[    26.389] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
   i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
   E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
   965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
   4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
   Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
   Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
   Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
   Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
   Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
   Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
   Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
   Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
   Haswell Server (GT2+), Haswell SDV Desktop (GT1),
   Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
   Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
   Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
   Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
   Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
   Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
   Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
   Haswell ULT Server (GT1), Haswell ULT Server (GT2),
   Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
   Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
   Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
   Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
   Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
   ValleyView PO board
[    26.389] (II) VESA: driver for VESA chipsets: vesa
[    26.389] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    26.389] (II) FBDEV: driver for framebuffer: fbdev
[    26.389] (++) using VT number 8

[    26.392] (II) intel(0): using device path '/dev/dri/card0'
[    26.392] (WW) Falling back to old probe method for vesa
[    26.392] (WW) Falling back to old probe method for modesetting
[    26.392] (WW) Falling back to old probe method for fbdev
[    26.392] (II) Loading sub module "fbdevhw"
[    26.392] (II) LoadModule: "fbdevhw"
[    26.392] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    26.392] (II) Module fbdevhw: vendor="X.Org Foundation"
[    26.392]    compiled for 1.13.0, module version = 0.0.2
[    26.392]    ABI class: X.Org Video Driver, version 13.0
[    26.393] (II) intel(0): Creating default Display subsection in Screen section
   "Default Screen Section" for depth/fbbpp 24/32
[    26.393] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    26.393] (==) intel(0): RGB weight 888
[    26.393] (==) intel(0): Default visual is TrueColor
[    26.393] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2)
[    26.393] (**) intel(0): Relaxed fencing enabled
[    26.393] (**) intel(0): Wait on SwapBuffers? enabled
[    26.393] (**) intel(0): Triple buffering? enabled
[    26.393] (**) intel(0): Framebuffer tiled
[    26.393] (**) intel(0): Pixmaps tiled
[    26.393] (**) intel(0): 3D buffers tiled
[    26.393] (**) intel(0): SwapBuffers wait enabled
[    26.393] (==) intel(0): video overlay key set to 0x101fe
[    26.393] (II) intel(0): Output LVDS1 has no monitor section
[    26.492] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[    26.492] (II) intel(0): Output VGA1 has no monitor section
[    26.493] (II) intel(0): Output HDMI1 has no monitor section
[    26.540] (II) intel(0): Output DP1 has no monitor section
[    26.540] (II) intel(0): EDID for output LVDS1
[    26.540] (II) intel(0): Manufacturer: AUO  Model: 26ec  Serial#: 0
[    26.540] (II) intel(0): Year: 2009  Week: 1
[    26.540] (II) intel(0): EDID Version: 1.3
[    26.540] (II) intel(0): Digital Display Input
[    26.540] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    26.540] (II) intel(0): Gamma: 2.20
[    26.540] (II) intel(0): No DPMS capabilities specified
[    26.540] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    26.540] (II) intel(0): First detailed timing is preferred mode
[    26.540] (II) intel(0): redX: 0.577 redY: 0.333   greenX: 0.333 greenY: 0.554
[    26.540] (II) intel(0): blueX: 0.161 blueY: 0.144   whiteX: 0.313 whiteY: 0.329
[    26.540] (II) intel(0): Manufacturer's mask: 0
[    26.540] (II) intel(0): Supported detailed timing:
[    26.540] (II) intel(0): clock: 71.8 MHz   Image Size:  344 x 193 mm
[    26.540] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1526 h_border: 0
[    26.540] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 784 v_border: 0
[    26.540] (II) intel(0): Unknown vendor-specific block f
[    26.540] (II) intel(0):  AUO
[    26.540] (II) intel(0):  B156XW02 V6
[    26.540] (II) intel(0): EDID (in hex):
[    26.540] (II) intel(0):    00ffffffffffff0006afec2600000000
[    26.540] (II) intel(0):    01130103802213780ad7759355558d29
[    26.540] (II) intel(0):    24505400000001010101010101010101
[    26.540] (II) intel(0):    0101010101010c1c56a0500010303020
[    26.540] (II) intel(0):    360058c1100000180000000f00000000
[    26.540] (II) intel(0):    00000000000000000020000000fe0041
[    26.540] (II) intel(0):    554f0a202020202020202020000000fe
[    26.540] (II) intel(0):    004231353658573032205636200a0065
[    26.540] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    26.540] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    26.540] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    26.540] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    26.540] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    26.540] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    26.540] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    26.540] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    26.540] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    26.540] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    26.540] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    26.540] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    26.540] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    26.540] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    26.540] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    26.540] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    26.540] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    26.540] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    26.540] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    26.540] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[    26.540] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    26.540] (II) intel(0): Printing probed modes for output LVDS1
[    26.540] (II) intel(0): Modeline "1366x768"x60.0   71.80  1366 1414 1446 1526  768 771 777 784 -hsync -vsync (47.1 kHz eP)
[    26.540] (II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    26.540] (II) intel(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    26.540] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    26.540] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    26.540] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    26.540] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    26.540] (II) intel(0): EDID for output VGA1
[    26.541] (II) intel(0): EDID for output HDMI1
[    26.592] (II) intel(0): EDID for output DP1
[    26.592] (II) intel(0): Output LVDS1 connected
[    26.592] (II) intel(0): Output VGA1 disconnected
[    26.592] (II) intel(0): Output HDMI1 disconnected
[    26.592] (II) intel(0): Output DP1 disconnected
[    26.592] (II) intel(0): Using exact sizes for initial modes
[    26.592] (II) intel(0): Output LVDS1 using initial mode 1366x768
[    26.592] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    26.592] (II) intel(0): Kernel page flipping support detected, enabling
[    26.592] (==) intel(0): DPI set to (96, 96)
[    26.592] (II) Loading sub module "fb"
[    26.592] (II) LoadModule: "fb"
[    26.592] (II) Loading /usr/lib/xorg/modules/libfb.so
[    26.592] (II) Module fb: vendor="X.Org Foundation"
[    26.592]    compiled for 1.13.0, module version = 1.0.0
[    26.592]    ABI class: X.Org ANSI C Emulation, version 0.4
[    26.592] (II) Loading sub module "dri2"
[    26.592] (II) LoadModule: "dri2"
[    26.592] (II) Module "dri2" already built-in
[    26.592] (II) UnloadModule: "vesa"
[    26.592] (II) Unloading vesa
[    26.592] (II) UnloadModule: "modesetting"
[    26.592] (II) Unloading modesetting
[    26.592] (II) UnloadModule: "fbdev"
[    26.592] (II) Unloading fbdev
[    26.592] (II) UnloadSubModule: "fbdevhw"
[    26.592] (II) Unloading fbdevhw
[    26.592] (==) Depth 24 pixmap format is 32 bpp
[    26.592] (II) intel(0): [DRI2] Setup complete
[    26.592] (II) intel(0): [DRI2]   DRI driver: i965
[    26.592] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[    26.593] (II) UXA(0): Driver registered support for the following operations:
[    26.593] (II)         solid
[    26.593] (II)         copy
[    26.593] (II)         composite (RENDER acceleration)
[    26.593] (II)         put_image
[    26.593] (II)         get_image
[    26.593] (==) intel(0): Backing store disabled
[    26.593] (==) intel(0): Silken mouse enabled
[    26.593] (II) intel(0): Initializing HW Cursor
[    26.593] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    26.594] (==) intel(0): DPMS enabled
[    26.594] (==) intel(0): Intel XvMC decoder enabled
[    26.594] (II) intel(0): Set up textured video
[    26.594] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    26.594] (II) intel(0): direct rendering: DRI2 Enabled
[    26.594] (==) intel(0): hotplug detection: "enabled"
[    26.604] (--) RandR disabled
[    26.611] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    26.611] (II) AIGLX: enabled GLX_INTEL_swap_event
[    26.612] (II) AIGLX: enabled GLX_ARB_create_context
[    26.612] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    26.612] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    26.612] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    26.612] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    26.612] (II) AIGLX: Loaded and initialized i965
[    26.612] (II) GLX: Initialized DRI2 GL provider for screen 0
[    26.612] (II) intel(0): Setting screen physical size to 361 x 203
[    26.619] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    26.621] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    26.621] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    26.621] (II) LoadModule: "evdev"
[    26.622] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    26.622] (II) Module evdev: vendor="X.Org Foundation"
[    26.622]    compiled for 1.13.0, module version = 2.7.3
[    26.622]    Module class: X.Org XInput Driver
[    26.622]    ABI class: X.Org XInput driver, version 18.0
[    26.622] (II) Using input driver 'evdev' for 'Power Button'
[    26.622] (**) Power Button: always reports core events
[    26.622] (**) evdev: Power Button: Device: "/dev/input/event3"
[    26.622] (--) evdev: Power Button: Vendor 0 Product 0x1
[    26.622] (--) evdev: Power Button: Found keys
[    26.622] (II) evdev: Power Button: Configuring as keyboard
[    26.622] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    26.622] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    26.622] (**) Option "xkb_rules" "evdev"
[    26.622] (**) Option "xkb_model" "pc105"
[    26.622] (**) Option "xkb_layout" "us"
[    26.622] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[    26.622] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    26.622] (II) Using input driver 'evdev' for 'Video Bus'
[    26.622] (**) Video Bus: always reports core events
[    26.622] (**) evdev: Video Bus: Device: "/dev/input/event12"
[    26.622] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    26.622] (--) evdev: Video Bus: Found keys
[    26.622] (II) evdev: Video Bus: Configuring as keyboard
[    26.622] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12/event12"
[    26.622] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    26.622] (**) Option "xkb_rules" "evdev"
[    26.622] (**) Option "xkb_model" "pc105"
[    26.622] (**) Option "xkb_layout" "us"
[    26.623] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    26.623] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    26.623] (II) Using input driver 'evdev' for 'Power Button'
[    26.623] (**) Power Button: always reports core events
[    26.623] (**) evdev: Power Button: Device: "/dev/input/event0"
[    26.623] (--) evdev: Power Button: Vendor 0 Product 0x1
[    26.623] (--) evdev: Power Button: Found keys
[    26.623] (II) evdev: Power Button: Configuring as keyboard
[    26.623] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0/event0"
[    26.623] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    26.623] (**) Option "xkb_rules" "evdev"
[    26.623] (**) Option "xkb_model" "pc105"
[    26.623] (**) Option "xkb_layout" "us"
[    26.623] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    26.623] (II) No input driver specified, ignoring this device.
[    26.623] (II) This device may have been added with another device file.
[    26.624] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    26.624] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    26.624] (II) Using input driver 'evdev' for 'Sleep Button'
[    26.624] (**) Sleep Button: always reports core events
[    26.624] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[    26.624] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    26.624] (--) evdev: Sleep Button: Found keys
[    26.624] (II) evdev: Sleep Button: Configuring as keyboard
[    26.624] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input2/event2"
[    26.624] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    26.624] (**) Option "xkb_rules" "evdev"
[    26.624] (**) Option "xkb_model" "pc105"
[    26.624] (**) Option "xkb_layout" "us"
[    26.624] (II) config/udev: Adding drm device (/dev/dri/card0)
[    26.624] (II) config/udev: Adding input device 1.3M HD WebCam (/dev/input/event11)
[    26.624] (**) 1.3M HD WebCam: Applying InputClass "evdev keyboard catchall"
[    26.624] (II) Using input driver 'evdev' for '1.3M HD WebCam'
[    26.624] (**) 1.3M HD WebCam: always reports core events
[    26.624] (**) evdev: 1.3M HD WebCam: Device: "/dev/input/event11"
[    26.624] (--) evdev: 1.3M HD WebCam: Vendor 0x1bcf Product 0x288a
[    26.624] (--) evdev: 1.3M HD WebCam: Found keys
[    26.624] (II) evdev: 1.3M HD WebCam: Configuring as keyboard
[    26.624] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input11/event11"
[    26.624] (II) XINPUT: Adding extended input device "1.3M HD WebCam" (type: KEYBOARD, id 10)
[    26.624] (**) Option "xkb_rules" "evdev"
[    26.624] (**) Option "xkb_model" "pc105"
[    26.624] (**) Option "xkb_layout" "us"
[    26.625] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event13)
[    26.625] (II) No input driver specified, ignoring this device.
[    26.625] (II) This device may have been added with another device file.
[    26.625] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event14)
[    26.625] (II) No input driver specified, ignoring this device.
[    26.625] (II) This device may have been added with another device file.
[    26.625] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event15)
[    26.625] (II) No input driver specified, ignoring this device.
[    26.625] (II) This device may have been added with another device file.
[    26.625] (II) config/udev: Adding input device 2.4GHz 2way RF Receiver (/dev/input/event7)
[    26.625] (**) 2.4GHz 2way RF Receiver: Applying InputClass "evdev keyboard catchall"
[    26.625] (II) Using input driver 'evdev' for '2.4GHz 2way RF Receiver'
[    26.626] (**) 2.4GHz 2way RF Receiver: always reports core events
[    26.626] (**) evdev: 2.4GHz 2way RF Receiver: Device: "/dev/input/event7"
[    26.626] (--) evdev: 2.4GHz 2way RF Receiver: Vendor 0x1bcf Product 0x5ca
[    26.626] (--) evdev: 2.4GHz 2way RF Receiver: Found keys
[    26.626] (II) evdev: 2.4GHz 2way RF Receiver: Configuring as keyboard
[    26.626] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input7/event7"
[    26.626] (II) XINPUT: Adding extended input device "2.4GHz 2way RF Receiver" (type: KEYBOARD, id 11)
[    26.626] (**) Option "xkb_rules" "evdev"
[    26.626] (**) Option "xkb_model" "pc105"
[    26.626] (**) Option "xkb_layout" "us"
[    26.626] (II) config/udev: Adding input device 2.4GHz 2way RF Receiver (/dev/input/event8)
[    26.626] (**) 2.4GHz 2way RF Receiver: Applying InputClass "evdev pointer catchall"
[    26.626] (**) 2.4GHz 2way RF Receiver: Applying InputClass "evdev keyboard catchall"
[    26.626] (II) Using input driver 'evdev' for '2.4GHz 2way RF Receiver'
[    26.626] (**) 2.4GHz 2way RF Receiver: always reports core events
[    26.626] (**) evdev: 2.4GHz 2way RF Receiver: Device: "/dev/input/event8"
[    26.626] (--) evdev: 2.4GHz 2way RF Receiver: Vendor 0x1bcf Product 0x5ca
[    26.626] (--) evdev: 2.4GHz 2way RF Receiver: Found 12 mouse buttons
[    26.626] (--) evdev: 2.4GHz 2way RF Receiver: Found scroll wheel(s)
[    26.626] (--) evdev: 2.4GHz 2way RF Receiver: Found relative axes
[    26.626] (--) evdev: 2.4GHz 2way RF Receiver: Found x and y relative axes
[    26.626] (--) evdev: 2.4GHz 2way RF Receiver: Found absolute axes
[    26.626] (II) evdev: 2.4GHz 2way RF Receiver: Forcing absolute x/y axes to exist.
[    26.626] (--) evdev: 2.4GHz 2way RF Receiver: Found keys
[    26.626] (II) evdev: 2.4GHz 2way RF Receiver: Configuring as mouse
[    26.626] (II) evdev: 2.4GHz 2way RF Receiver: Configuring as keyboard
[    26.626] (II) evdev: 2.4GHz 2way RF Receiver: Adding scrollwheel support
[    26.626] (**) evdev: 2.4GHz 2way RF Receiver: YAxisMapping: buttons 4 and 5
[    26.626] (**) evdev: 2.4GHz 2way RF Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    26.626] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/input/input8/event8"
[    26.626] (II) XINPUT: Adding extended input device "2.4GHz 2way RF Receiver" (type: KEYBOARD, id 12)
[    26.626] (**) Option "xkb_rules" "evdev"
[    26.626] (**) Option "xkb_model" "pc105"
[    26.626] (**) Option "xkb_layout" "us"
[    26.626] (II) evdev: 2.4GHz 2way RF Receiver: initialized for relative axes.
[    26.626] (WW) evdev: 2.4GHz 2way RF Receiver: ignoring absolute axes.
[    26.627] (**) 2.4GHz 2way RF Receiver: (accel) keeping acceleration scheme 1
[    26.627] (**) 2.4GHz 2way RF Receiver: (accel) acceleration profile 0
[    26.627] (**) 2.4GHz 2way RF Receiver: (accel) acceleration factor: 2.000
[    26.627] (**) 2.4GHz 2way RF Receiver: (accel) acceleration threshold: 4
[    26.627] (II) config/udev: Adding input device 2.4GHz 2way RF Receiver (/dev/input/mouse0)
[    26.627] (II) No input driver specified, ignoring this device.
[    26.627] (II) This device may have been added with another device file.
[    26.627] (II) config/udev: Adding input device CHESEN PS2 to USB Converter (/dev/input/event9)
[    26.627] (**) CHESEN PS2 to USB Converter: Applying InputClass "evdev keyboard catchall"
[    26.627] (II) Using input driver 'evdev' for 'CHESEN PS2 to USB Converter'
[    26.627] (**) CHESEN PS2 to USB Converter: always reports core events
[    26.627] (**) evdev: CHESEN PS2 to USB Converter: Device: "/dev/input/event9"
[    26.627] (--) evdev: CHESEN PS2 to USB Converter: Vendor 0xa81 Product 0x205
[    26.627] (--) evdev: CHESEN PS2 to USB Converter: Found keys
[    26.627] (II) evdev: CHESEN PS2 to USB Converter: Configuring as keyboard
[    26.627] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input9/event9"
[    26.627] (II) XINPUT: Adding extended input device "CHESEN PS2 to USB Converter" (type: KEYBOARD, id 13)
[    26.627] (**) Option "xkb_rules" "evdev"
[    26.627] (**) Option "xkb_model" "pc105"
[    26.627] (**) Option "xkb_layout" "us"
[    26.628] (II) config/udev: Adding input device CHESEN PS2 to USB Converter (/dev/input/event10)
[    26.628] (**) CHESEN PS2 to USB Converter: Applying InputClass "evdev pointer catchall"
[    26.628] (**) CHESEN PS2 to USB Converter: Applying InputClass "evdev keyboard catchall"
[    26.628] (II) Using input driver 'evdev' for 'CHESEN PS2 to USB Converter'
[    26.628] (**) CHESEN PS2 to USB Converter: always reports core events
[    26.628] (**) evdev: CHESEN PS2 to USB Converter: Device: "/dev/input/event10"
[    26.628] (--) evdev: CHESEN PS2 to USB Converter: Vendor 0xa81 Product 0x205
[    26.628] (--) evdev: CHESEN PS2 to USB Converter: Found 9 mouse buttons
[    26.628] (--) evdev: CHESEN PS2 to USB Converter: Found scroll wheel(s)
[    26.628] (--) evdev: CHESEN PS2 to USB Converter: Found relative axes
[    26.628] (--) evdev: CHESEN PS2 to USB Converter: Found x and y relative axes
[    26.628] (--) evdev: CHESEN PS2 to USB Converter: Found keys
[    26.628] (II) evdev: CHESEN PS2 to USB Converter: Configuring as mouse
[    26.628] (II) evdev: CHESEN PS2 to USB Converter: Configuring as keyboard
[    26.628] (II) evdev: CHESEN PS2 to USB Converter: Adding scrollwheel support
[    26.628] (**) evdev: CHESEN PS2 to USB Converter: YAxisMapping: buttons 4 and 5
[    26.628] (**) evdev: CHESEN PS2 to USB Converter: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    26.628] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input10/event10"
[    26.628] (II) XINPUT: Adding extended input device "CHESEN PS2 to USB Converter" (type: KEYBOARD, id 14)
[    26.628] (**) Option "xkb_rules" "evdev"
[    26.628] (**) Option "xkb_model" "pc105"
[    26.628] (**) Option "xkb_layout" "us"
[    26.628] (II) evdev: CHESEN PS2 to USB Converter: initialized for relative axes.
[    26.628] (**) CHESEN PS2 to USB Converter: (accel) keeping acceleration scheme 1
[    26.628] (**) CHESEN PS2 to USB Converter: (accel) acceleration profile 0
[    26.628] (**) CHESEN PS2 to USB Converter: (accel) acceleration factor: 2.000
[    26.628] (**) CHESEN PS2 to USB Converter: (accel) acceleration threshold: 4
[    26.628] (II) config/udev: Adding input device CHESEN PS2 to USB Converter (/dev/input/mouse1)
[    26.628] (II) No input driver specified, ignoring this device.
[    26.628] (II) This device may have been added with another device file.
[    26.629] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[    26.629] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    26.629] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    26.629] (**) AT Translated Set 2 keyboard: always reports core events
[    26.629] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[    26.629] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    26.629] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    26.629] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    26.629] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[    26.629] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 15)
[    26.629] (**) Option "xkb_rules" "evdev"
[    26.629] (**) Option "xkb_model" "pc105"
[    26.629] (**) Option "xkb_layout" "us"
[    26.629] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event16)
[    26.629] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    26.629] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    26.629] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    26.629] (II) LoadModule: "synaptics"
[    26.629] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    26.629] (II) Module synaptics: vendor="X.Org Foundation"
[    26.629]    compiled for 1.12.99.905, module version = 1.6.2
[    26.629]    Module class: X.Org XInput Driver
[    26.629]    ABI class: X.Org XInput driver, version 18.0
[    26.629] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    26.629] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    26.629] (**) Option "Device" "/dev/input/event16"
[    26.630] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[    26.630] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5774
[    26.630] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5022
[    26.630] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    26.630] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    26.630] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    26.630] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    26.630] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    26.630] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    26.630] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input16/event16"
[    26.630] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 16)
[    26.630] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    26.630] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    26.630] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
[    26.630] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    26.630] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    26.630] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    26.630] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    26.630] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    26.630] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
[    26.630] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    26.632] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event5)
[    26.632] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    26.632] (II) Using input driver 'evdev' for 'Acer WMI hotkeys'
[    26.632] (**) Acer WMI hotkeys: always reports core events
[    26.632] (**) evdev: Acer WMI hotkeys: Device: "/dev/input/event5"
[    26.632] (--) evdev: Acer WMI hotkeys: Vendor 0 Product 0
[    26.632] (--) evdev: Acer WMI hotkeys: Found keys
[    26.632] (II) evdev: Acer WMI hotkeys: Configuring as keyboard
[    26.632] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event5"
[    26.632] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 17)
[    26.632] (**) Option "xkb_rules" "evdev"
[    26.632] (**) Option "xkb_model" "pc105"
[    26.632] (**) Option "xkb_layout" "us"
[    26.632] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event6)
[    26.632] (II) No input driver specified, ignoring this device.
[    26.632] (II) This device may have been added with another device file.
[    26.633] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0)
[    26.633] (II) No input driver specified, ignoring this device.
[    26.633] (II) This device may have been added with another device file.
[    34.082] (II) intel(0): EDID vendor "AUO", prod id 9964
[    34.083] (II) intel(0): Printing DDC gathered Modelines:
[    34.083] (II) intel(0): Modeline "1366x768"x0.0   71.80  1366 1414 1446 1526  768 771 777 784 -hsync -vsync (47.1 kHz eP)
[    36.461] (II) XKB: reuse xkmfile /var/lib/xkb/server-C167E0D396CEA5B5A6A913CB2E367E1E00A27666.xkm
[    36.728] (II) intel(0): EDID vendor "AUO", prod id 9964
[    36.728] (II) intel(0): Printing DDC gathered Modelines:
[    36.728] (II) intel(0): Modeline "1366x768"x0.0   71.80  1366 1414 1446 1526  768 771 777 784 -hsync -vsync (47.1 kHz eP)
[  5613.125] (II) config/udev: removing device CHESEN PS2 to USB Converter
[  5613.132] (II) evdev: CHESEN PS2 to USB Converter: Close
[  5613.132] (II) UnloadModule: "evdev"
[  5613.146] (II) config/udev: removing device CHESEN PS2 to USB Converter
[  5613.153] (II) evdev: CHESEN PS2 to USB Converter: Close
[  5613.153] (II) UnloadModule: "evdev"
[  5614.420] (II) config/udev: removing device 2.4GHz 2way RF Receiver
[  5614.424] (II) evdev: 2.4GHz 2way RF Receiver: Close
[  5614.424] (II) UnloadModule: "evdev"
[  5614.433] (II) config/udev: removing device 2.4GHz 2way RF Receiver
[  5614.442] (II) evdev: 2.4GHz 2way RF Receiver: Close
[  5614.442] (II) UnloadModule: "evdev"
Marc-André Laverdière
Linux Geek, Software Engineer, Scientist
LibreOffice Hacker in his spare time
Someone who tries to liberate computres
malaverdiere
Level 1
Level 1
 
Posts: 13
Joined: Sun Mar 25, 2012 9:03 pm

Re: Regular screen freezes

Postby bigj231 on Mon Feb 25, 2013 12:24 pm

Darn, I accidentally closed the page and lost my reply.
Anyway, since it's not consistent, it might be a hardware issue. I was looking for some pattern so we could pinpoint a specific error or kernel module.
Try running prime95 on Windows and see if it's stable. Keep an eye on your temperatures while doing this, as it's been known to burn up systems. Also, watch your temperatures in Linux. If it's ever over 80C, you need to clean out your heatsink.
Running on a 4-slot toaster @ 60Hz
User avatar
bigj231
Level 5
Level 5
 
Posts: 793
Joined: Fri Feb 26, 2010 10:16 am
Location: Middle of Nowhere

Re: Regular screen freezes

Postby malaverdiere on Wed Mar 06, 2013 1:30 pm

That was a good hint. I added an applet at the bottom panel showing the temperature, and it was >70 C without doing anything much.

I have seen in another forum that, sometimes, the fan control could be improved with a BIOS update. I have done that, and saw that the temperatures are noticeably lower.

I reinstalled irqbalance and things went fine for a while.

But I had two crashes recently, after installing Cinnamon. The temperatures shown were <65C both cases I don't remember a crash in XFCE after this.

The log files are not giving any hints either. I am removing IRQBalance once again and see if that changes anything.
Is there anything else to monitor?
Marc-André Laverdière
Linux Geek, Software Engineer, Scientist
LibreOffice Hacker in his spare time
Someone who tries to liberate computres
malaverdiere
Level 1
Level 1
 
Posts: 13
Joined: Sun Mar 25, 2012 9:03 pm

Re: Regular screen freezes

Postby malaverdiere on Mon Mar 11, 2013 7:48 am

I had another crash today, with something possibly helpful in the log files.

In syslog (same thing in kern.log)
Code: Select all
Mar 11 00:45:17 redemption kernel: [54825.404113] CPU1: Package temperature above threshold, cpu clock throttled (total events = 43140)
Mar 11 00:45:17 redemption kernel: [54825.404114] CPU2: Package temperature above threshold, cpu clock throttled (total events = 43140)
Mar 11 00:45:17 redemption kernel: [54825.404116] CPU0: Package temperature above threshold, cpu clock throttled (total events = 43140)
Mar 11 00:45:17 redemption kernel: [54825.404126] CPU3: Package temperature above threshold, cpu clock throttled (total events = 43140)
Mar 11 00:45:17 redemption kernel: [54825.405077] CPU3: Core temperature/speed normal
Mar 11 00:45:17 redemption kernel: [54825.405078] CPU2: Core temperature/speed normal
Mar 11 00:45:17 redemption kernel: [54825.405080] CPU1: Package temperature/speed normal
Mar 11 00:45:17 redemption kernel: [54825.405081] CPU2: Package temperature/speed normal
Mar 11 00:45:17 redemption kernel: [54825.405085] CPU0: Package temperature/speed normal
Mar 11 00:45:17 redemption kernel: [54825.405089] CPU3: Package temperature/speed normal
Mar 11 01:17:01 redemption CRON[3201]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)


So it seems that the temperature is under control... what else???
Marc-André Laverdière
Linux Geek, Software Engineer, Scientist
LibreOffice Hacker in his spare time
Someone who tries to liberate computres
malaverdiere
Level 1
Level 1
 
Posts: 13
Joined: Sun Mar 25, 2012 9:03 pm

Re: Regular screen freezes

Postby malaverdiere on Mon Mar 11, 2013 8:15 am

I had a temporary freeze - lasted maybe 5 seconds

This is in .xsession-errors
Code: Select all
Window manager warning: meta_window_activate called by a pager with a 0 timestamp; the pager needs to be fixed.
X Error: BadWindow (invalid Window parameter) 3
  Major opcode: 20 (X_GetProperty)
  Resource id:  0x1
X Error: BadWindow (invalid Window parameter) 3
  Major opcode: 15 (X_QueryTree)
  Resource id:  0x1
X Error: BadWindow (invalid Window parameter) 3
  Major opcode: 20 (X_GetProperty)
  Resource id:  0x1
X Error: BadWindow (invalid Window parameter) 3
  Major opcode: 15 (X_QueryTree)
  Resource id:  0x1
....
Marc-André Laverdière
Linux Geek, Software Engineer, Scientist
LibreOffice Hacker in his spare time
Someone who tries to liberate computres
malaverdiere
Level 1
Level 1
 
Posts: 13
Joined: Sun Mar 25, 2012 9:03 pm

Re: Regular screen freezes

Postby bigj231 on Mon Mar 11, 2013 4:16 pm

If your CPU is throttling back due to temperature, you need to fix that issue first. That is never okay on any system. Try cleaning out the heatsink, and if that doesn't help, replace the thermal compound (both of these work best if you disassemble your laptop). I like Arctic Silver 5 since I got it free with a motherboard and I still have some left. There are better compounds out there, but you can use whatever decent stuff you can find. Arctic MX-2 is one to look for.
My laptop runs about 50C, idles at 40. It used to hit 65C. Different systems have different thermal designs, but they should never be over ~55C at idle. Lower temperatures are better, but are hard to get in a laptop.

And that temporary freeze isn't that big of a deal. It's just a misbehaving window/application. I occasionally get little blips like that in any system i use.
Running on a 4-slot toaster @ 60Hz
User avatar
bigj231
Level 5
Level 5
 
Posts: 793
Joined: Fri Feb 26, 2010 10:16 am
Location: Middle of Nowhere

Re: Regular screen freezes

Postby malaverdiere on Fri Mar 15, 2013 5:41 pm

For a change, I got something interesting in the log files, but I don't know what they mean
Code: Select all
Mar 15 16:46:11 redemption kernel: [44997.996208] CPU1: Package power limit notification (total events = 544)
Mar 15 16:46:11 redemption kernel: [44997.996212] CPU3: Package power limit notification (total events = 544)
Mar 15 16:46:11 redemption kernel: [44997.996214] CPU2: Package power limit notification (total events = 544)
Mar 15 16:46:11 redemption kernel: [44997.996216] CPU0: Package power limit notification (total events = 543)
Mar 15 16:46:11 redemption kernel: [44997.996303] CPU2: Package power limit normal
Mar 15 16:46:11 redemption kernel: [44997.996304] CPU3: Package power limit normal
Mar 15 16:46:11 redemption kernel: [44997.996306] CPU1: Package power limit normal
Mar 15 16:46:11 redemption kernel: [44997.996310] CPU0: Package power limit normal


uname -a says
Code: Select all
Linux redemption 3.5.0-25-generic #39-Ubuntu SMP Mon Feb 25 18:26:58 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux


What does that mean???
Marc-André Laverdière
Linux Geek, Software Engineer, Scientist
LibreOffice Hacker in his spare time
Someone who tries to liberate computres
malaverdiere
Level 1
Level 1
 
Posts: 13
Joined: Sun Mar 25, 2012 9:03 pm

Re: Regular screen freezes

Postby monkeyboy on Fri Mar 15, 2013 7:33 pm

Check you peripheral components. Sometimes it is as easy as a bad USB plug or a cord. I recently finished up a memory and drive upgrade and upon reboot I was greeted with intermittent freezes, keyboard loss and no mouse. Software and hardware checks eventually led to a bad mouse connection which should have been one of my first checks but I over thought the problem. Good Luck
If you don't like it, make something better
If you can't make something better, adapt
If you can't do either ball your panties up and cry.

Complaining is like masticating most anyone can do it.
However doing it in public is really hardcore.
User avatar
monkeyboy
Level 5
Level 5
 
Posts: 787
Joined: Mon Oct 13, 2008 11:30 am

Re: Regular screen freezes

Postby malaverdiere on Tue Mar 26, 2013 8:58 am

I had something weirder in my Xorg.0.old file, which I don't know how to interpret.

Code: Select all
(EE) [mi] EQ overflowing.  Additional events will be discarded until existing events are processed.
(EE)
(EE) Backtrace:
(EE) 0: /usr/bin/X (xorg_backtrace+0x36) [0x7f5a533e2b76]
(EE) 1: /usr/bin/X (mieqEnqueue+0x26b) [0x7f5a533c3f5b]
(EE) 2: /usr/bin/X (0x7f5a5323a000+0x6a4d2) [0x7f5a532a44d2]
(EE) 3: /usr/lib/xorg/modules/input/evdev_drv.so (0x7f5a4e413000+0x5f34) [0x7f5a4e418f34]
(EE) 4: /usr/bin/X (0x7f5a5323a000+0x93707) [0x7f5a532cd707]
(EE) 5: /usr/bin/X (0x7f5a5323a000+0xbcee8) [0x7f5a532f6ee8]
(EE) 6: /lib/x86_64-linux-gnu/libpthread.so.0 (0x7f5a52560000+0xfcb0) [0x7f5a5256fcb0]
(EE) 7: /lib/x86_64-linux-gnu/libc.so.6 (ioctl+0x7) [0x7f5a512b0527]
(EE) 8: /usr/lib/x86_64-linux-gnu/libdrm.so.2 (drmIoctl+0x28) [0x7f5a52357328]
(EE) 9: /usr/lib/x86_64-linux-gnu/libdrm.so.2 (drmCommandNone+0x16) [0x7f5a523596a6]
(EE) 10: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f5a4ff50000+0x170e5) [0x7f5a4ff670e5]
(EE) 11: /usr/bin/X (BlockHandler+0x44) [0x7f5a53293c34]
(EE) 12: /usr/bin/X (WaitForSomething+0x114) [0x7f5a533dff24]
(EE) 13: /usr/bin/X (0x7f5a5323a000+0x557e1) [0x7f5a5328f7e1]
(EE) 14: /usr/bin/X (0x7f5a5323a000+0x4456a) [0x7f5a5327e56a]
(EE) 15: /lib/x86_64-linux-gnu/libc.so.6 (__libc_start_main+0xed) [0x7f5a511e576d]
(EE) 16: /usr/bin/X (0x7f5a5323a000+0x448ad) [0x7f5a5327e8ad]
(EE)
(EE) [mi] These backtraces from mieqEnqueue may point to a culprit higher up the stack.
(EE) [mi] mieq is *NOT* the cause.  It is a victim.
(EE) [mi] EQ overflow continuing.  100 events have been dropped.
(EE)
(EE) Backtrace:
(EE) 0: /usr/bin/X (xorg_backtrace+0x36) [0x7f5a533e2b76]
(EE) 1: /usr/bin/X (0x7f5a5323a000+0x6a4d2) [0x7f5a532a44d2]
(EE) 2: /usr/lib/xorg/modules/input/evdev_drv.so (0x7f5a4e413000+0x5f34) [0x7f5a4e418f34]
(EE) 3: /usr/bin/X (0x7f5a5323a000+0x93707) [0x7f5a532cd707]
(EE) 4: /usr/bin/X (0x7f5a5323a000+0xbcee8) [0x7f5a532f6ee8]
(EE) 5: /lib/x86_64-linux-gnu/libpthread.so.0 (0x7f5a52560000+0xfcb0) [0x7f5a5256fcb0]
(EE) 6: /lib/x86_64-linux-gnu/libc.so.6 (ioctl+0x7) [0x7f5a512b0527]
(EE) 7: /usr/lib/x86_64-linux-gnu/libdrm.so.2 (drmIoctl+0x28) [0x7f5a52357328]
(EE) 8: /usr/lib/x86_64-linux-gnu/libdrm.so.2 (drmCommandNone+0x16) [0x7f5a523596a6]
(EE) 9: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f5a4ff50000+0x170e5) [0x7f5a4ff670e5]
(EE) 10: /usr/bin/X (BlockHandler+0x44) [0x7f5a53293c34]
(EE) 11: /usr/bin/X (WaitForSomething+0x114) [0x7f5a533dff24]
(EE) 12: /usr/bin/X (0x7f5a5323a000+0x557e1) [0x7f5a5328f7e1]
(EE) 13: /usr/bin/X (0x7f5a5323a000+0x4456a) [0x7f5a5327e56a]
(EE) 14: /lib/x86_64-linux-gnu/libc.so.6 (__libc_start_main+0xed) [0x7f5a511e576d]
(EE) 15: /usr/bin/X (0x7f5a5323a000+0x448ad) [0x7f5a5327e8ad]
(EE)
(EE) [mi] EQ overflow continuing.  200 events have been dropped.
(EE)
(EE) Backtrace:
(EE) 0: /usr/bin/X (xorg_backtrace+0x36) [0x7f5a533e2b76]
(EE) 1: /usr/bin/X (0x7f5a5323a000+0x6a4d2) [0x7f5a532a44d2]
(EE) 2: /usr/lib/xorg/modules/input/evdev_drv.so (0x7f5a4e413000+0x5f34) [0x7f5a4e418f34]
(EE) 3: /usr/bin/X (0x7f5a5323a000+0x93707) [0x7f5a532cd707]
(EE) 4: /usr/bin/X (0x7f5a5323a000+0xbcee8) [0x7f5a532f6ee8]
(EE) 5: /lib/x86_64-linux-gnu/libpthread.so.0 (0x7f5a52560000+0xfcb0) [0x7f5a5256fcb0]
(EE) 6: /lib/x86_64-linux-gnu/libc.so.6 (ioctl+0x7) [0x7f5a512b0527]
(EE) 7: /usr/lib/x86_64-linux-gnu/libdrm.so.2 (drmIoctl+0x28) [0x7f5a52357328]
(EE) 8: /usr/lib/x86_64-linux-gnu/libdrm.so.2 (drmCommandNone+0x16) [0x7f5a523596a6]
(EE) 9: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f5a4ff50000+0x170e5) [0x7f5a4ff670e5]
(EE) 10: /usr/bin/X (BlockHandler+0x44) [0x7f5a53293c34]
(EE) 11: /usr/bin/X (WaitForSomething+0x114) [0x7f5a533dff24]
(EE) 12: /usr/bin/X (0x7f5a5323a000+0x557e1) [0x7f5a5328f7e1]
(EE) 13: /usr/bin/X (0x7f5a5323a000+0x4456a) [0x7f5a5327e56a]
(EE) 14: /lib/x86_64-linux-gnu/libc.so.6 (__libc_start_main+0xed) [0x7f5a511e576d]
(EE) 15: /usr/bin/X (0x7f5a5323a000+0x448ad) [0x7f5a5327e8ad]
(EE)
[ 24914.579] [mi] Increasing EQ size to 512 to prevent dropped events.
[ 24914.579] [mi] EQ processing has resumed after 259 dropped events.
[ 24914.579] [mi] This may be caused my a misbehaving driver monopolizing the server's resources.


What does it mean? The only hits I got on Google were for NVidia drivers, and I'm on Intel...
Marc-André Laverdière
Linux Geek, Software Engineer, Scientist
LibreOffice Hacker in his spare time
Someone who tries to liberate computres
malaverdiere
Level 1
Level 1
 
Posts: 13
Joined: Sun Mar 25, 2012 9:03 pm

Linux Mint is funded by ads and donations.
 

Return to Hardware Support

Who is online

Users browsing this forum: mcganical and 17 guests