Hard Drive Can't Mount
Forum rules
There are no such things as "stupid" questions. However if you think your question is a bit stupid, then this is the right place for you to post it. Stick to easy to-the-point questions that you feel people can answer fast. For long and complicated questions use the other forums in the support section.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
There are no such things as "stupid" questions. However if you think your question is a bit stupid, then this is the right place for you to post it. Stick to easy to-the-point questions that you feel people can answer fast. For long and complicated questions use the other forums in the support section.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Hard Drive Can't Mount
I'm completely new to Linux, so if the answer is console stuff, you'll have to explain to me very slowly lol.
I'm dual-booting with Windows Vista, I couldn't access my second partition on Linux so I combined them into one partition because the only one I could access was nearly full.(also for drive C, which is on said drive, tells me I only have 2gb left... This is probably normal but another reason why I was trying to increase said drive lol. So I formatted the one partition, combined them again, and now I can't even open my 500gb drive, I can open the 200gb okay. It says unable to mount location, can't mount file. So how do I... mount the drive? lol
EDIT: Ran Gparted, it says the drive is already mounted(well, should be since that's the drive Linux is on), still can't access it. Ran NTFS config, enabled read/write support, which did absolutely nothing lol.
I'm dual-booting with Windows Vista, I couldn't access my second partition on Linux so I combined them into one partition because the only one I could access was nearly full.(also for drive C, which is on said drive, tells me I only have 2gb left... This is probably normal but another reason why I was trying to increase said drive lol. So I formatted the one partition, combined them again, and now I can't even open my 500gb drive, I can open the 200gb okay. It says unable to mount location, can't mount file. So how do I... mount the drive? lol
EDIT: Ran Gparted, it says the drive is already mounted(well, should be since that's the drive Linux is on), still can't access it. Ran NTFS config, enabled read/write support, which did absolutely nothing lol.
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 1 time in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Re: Hard Drive Can't Mount
Can anyone help? Sorry to bump this, but I'm getting a million views and no answers. I've searched google and these forums, found some solutions I think, all console commands that I don't understand. Please help, the low disk space is one of the only reasons why I don't use Linux much, and I can't even open the drive Linux should be running installed on.
EDIT:After some more searching I found the command for mounting the drive, I guess?
And came up with the error,
"Mount is denied because the NTFS volume is already exclusively opened.
The volume may be already mounted, or another software may use it which
could be identified for example by the help of the 'fuser' command."
Switched out mount for fuser, got the number 639? I have no idea what that means lol
EDIT:After some more searching I found the command for mounting the drive, I guess?
Code: Select all
sudo mount /dev/sda2 /media/sda2
"Mount is denied because the NTFS volume is already exclusively opened.
The volume may be already mounted, or another software may use it which
could be identified for example by the help of the 'fuser' command."
Switched out mount for fuser, got the number 639? I have no idea what that means lol
Re: Hard Drive Can't Mount
Code: Select all
Disk /dev/sda: 200.0 GB, 200049647616 bytes
255 heads, 63 sectors/track, 24321 cylinders, total 390721968 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x67df67df
Device Boot Start End Blocks Id System
/dev/sda1 63 12273659 6136798+ 12 Compaq diagnostics
/dev/sda2 * 12273660 390717982 189222161+ 7 HPFS/NTFS/exFAT
Disk /dev/sdf: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xc728aa4a
Device Boot Start End Blocks Id System
/dev/sdf1 * 63 976768014 488383976 7 HPFS/NTFS/exFAT
Code: Select all
Filesystem Size Used Avail Use% Mounted on
/dev/loop0 18G 11G 6.1G 63% /
udev 1001M 4.0K 1001M 1% /dev
tmpfs 404M 1016K 403M 1% /run
none 5.0M 0 5.0M 0% /run/lock
none 1009M 432K 1008M 1% /run/shm
none 100M 12K 100M 1% /run/user
/dev/sdf1 466G 228G 239G 49% /host
/dev/sda2 181G 126G 56G 70% /media/sda2
Last edited by Mashimaro7 on Sat Feb 16, 2019 10:34 am, edited 1 time in total.
Reason: Added code tags
Reason: Added code tags
Re: Hard Drive Can't Mount
I don't know a ton about dual boot set ups but from the output you posted your the drive you mentioned in a previous post is already mounted at /media/sda2.
and from the fdisk info you can see that its NTFS, and is your boot drive, One of the SDA devices is usually contains the boot sector for linux so this make sense. I assume that you have your windows partition on sdf?
Device Boot Start End Blocks Id System
/dev/sda2 * 12273660 390717982 189222161+ 7 HPFS/NTFS/exFAT
That is why it wont mount... its already mounted. when you open computer from the desktop that should be the linux file system on this drive.
you should also be able to
To see your files here.
Code: Select all
Filesystem Size Used Avail Use% Mounted on
/dev/loop0 18G 11G 6.1G 63% /
udev 1001M 4.0K 1001M 1% /dev
tmpfs 404M 1016K 403M 1% /run
none 5.0M 0 5.0M 0% /run/lock
none 1009M 432K 1008M 1% /run/shm
none 100M 12K 100M 1% /run/user
/dev/sdf1 466G 228G 239G 49% /host
/dev/sda2 181G 126G 56G 70% /media/sda2 <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Device Boot Start End Blocks Id System
/dev/sda2 * 12273660 390717982 189222161+ 7 HPFS/NTFS/exFAT
That is why it wont mount... its already mounted. when you open computer from the desktop that should be the linux file system on this drive.
you should also be able to
Code: Select all
cd /media/sda2
ls -l
Last edited by jawgrape on Sat Feb 16, 2019 10:34 am, edited 1 time in total.
Reason: Added code tag
Reason: Added code tag
Re: Hard Drive Can't Mount
Sorry for the long delay. So do I need to input that code in order to use my files? It's not that I need to mount my drive, I'm just trying to open it and it says cannot mount drive. Also my Windows partition is on the sda2, I put Linux on the bigger one and a bunch of my files which I can't even access unless I'm using Windows lol.
Re: Hard Drive Can't Mount
No ls -l is just the terminal command to list files in a directory.
So the drive you are trying to access is:
/dev/sdf1 466G 228G 239G 49% /host
which is mounted at /host
You should just be able to open it. Maybe its a permissions problem.
do this at the terminal and post the output:
So the drive you are trying to access is:
/dev/sdf1 466G 228G 239G 49% /host
which is mounted at /host
You should just be able to open it. Maybe its a permissions problem.
do this at the terminal and post the output:
Code: Select all
ls -l / | grep host
Re: Hard Drive Can't Mount
should look something like this:
Code: Select all
# ls -l / | grep host
drwxr-xr-x 4 root root 4.0K Mar 28 16:25 host
Re: Hard Drive Can't Mount
Oh okay,I just copied it this time and got
drwxrwxrwx 1 root root 4096 Apr 1 19:00 host
drwxrwxrwx 1 root root 4096 Apr 1 19:00 host
Re: Hard Drive Can't Mount
From the looks of it, I think your 500GB partition is already mounted in the /host directory.Mashimaro7 wrote:
Disk /dev/sdf: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xc728aa4a
and
Filesystem Size Used Avail Use% Mounted on
/dev/loop0 18G 11G 6.1G 63% /
udev 1001M 4.0K 1001M 1% /dev
tmpfs 404M 1016K 403M 1% /run
none 5.0M 0 5.0M 0% /run/lock
none 1009M 432K 1008M 1% /run/shm
none 100M 12K 100M 1% /run/user
/dev/sdf1 466G 228G 239G 49% /host
/dev/sda2 181G 126G 56G 70% /media/sda2
Have you tried going to the /host directory from your file manager? Are your files in there?
If not, you can try unmounting the partition first.
Code: Select all
sudo umount /host
Code: Select all
sudo mkdir /media/(your username)/sdf1
sudo mount /dev/sdf1 /media/(your username)/sdf1
EDIT: I edited how to mount a external USB disk.
Last edited by nerdtron on Mon Apr 08, 2013 10:37 pm, edited 2 times in total.
Re: Hard Drive Can't Mount
Permissions look fine.
yeah so as nerdtron mentions and I have before... you should just be able to get to the files...
Try this before trying to unmount and remount in a different directory.
click into Computer on your desktop>File System>host
and tell us if you see the files you wish to access. If not then try nerdtrons thing.
good luck
yeah so as nerdtron mentions and I have before... you should just be able to get to the files...
Try this before trying to unmount and remount in a different directory.
click into Computer on your desktop>File System>host
and tell us if you see the files you wish to access. If not then try nerdtrons thing.
good luck
Re: Hard Drive Can't Mount
I tried unmounting it, it says the drive is in use(since it's the one Lunux is installed on), I can access the files on /host I found out, but still I can't install anything to the drive or. The problem is... half solved? lol
Re: Hard Drive Can't Mount
I don't understand. But it is not a Linux Partition, isn't it? How come Linux is installed in this NTFS/exFAT partition?I tried unmounting it, it says the drive is in use(since it's the one Lunux is installed on)
Code: Select all
Device Boot Start End Blocks Id System
/dev/sdf1 * 63 976768014 488383976 7 HPFS/NTFS/exFAT
Code: Select all
sudo umount -f /host
Code: Select all
sudo umount -l /host
What are you trying to install in the /host partition? It's not the path where installed applications go. You should just us the Software Center if you want to install anything. It will handle everything for you.I can access the files on /host I found out, but still I can't install anything to the drive or.
And by the way, how did you install Linux Mint? Did you use mintforwin? Or you did a full install? If a full install, what did you choose? Install alongside windows or you clicked "do something else" and went to the manual partitioner?
Re: Hard Drive Can't Mount
Yeah it's Linux... I installed it on a NTFS drive... I don't know about forcing an unmount since it's my host drive lol... I'm trying to install/try out steam games, but when I try to install it to drive c it says not enough space... Also, I installed with mint4win and went install alongside Windows... I still use Windows... just for games though lol.
Re: Hard Drive Can't Mount
You lost me there...lolMashimaro7 wrote:Yeah it's Linux... I installed it on a NTFS drive...
That explains it. I thought it was a full install. I don't have much experince in mint4win scenarios so I cannot help you further.Mashimaro7 wrote:Also, I installed with mint4win and went install alongside Windows...
And besides, if you really would like to install steam and try out gaming in Linux, you should create a seperate partition for it and do a full install instead. Because with a mint4win install you will not experice the full potential of Linux. mint4win was primarily designed for testing purposes and being familiar with the Linux environment.
Re: Hard Drive Can't Mount
Oh really? I wanted to do that, but I was unsure if I could do it without a DVD/flash drive...
Re: Hard Drive Can't Mount
1. If you want to do a full install, first remove your mint4win install. Go to the control panel in windows and uninstall Linux Mint there.
2. Next your can burn the Linux Mint ISO to a DVD or to a bootable USB. See this tutorial full of screenshots http://www.psychocats.net/ubuntu/usb
3. Boot using your DVD or the bootable USB you created and follow this tutorial http://www.linuxbsdos.com/2012/06/06/ho ... windows-7/
Note: Even though this procedure is safe, be sure that you have a backup of your data. This can go wrong easily when working with partitions. Goodluck!
2. Next your can burn the Linux Mint ISO to a DVD or to a bootable USB. See this tutorial full of screenshots http://www.psychocats.net/ubuntu/usb
3. Boot using your DVD or the bootable USB you created and follow this tutorial http://www.linuxbsdos.com/2012/06/06/ho ... windows-7/
Note: Even though this procedure is safe, be sure that you have a backup of your data. This can go wrong easily when working with partitions. Goodluck!
Re: Hard Drive Can't Mount
Oh? What if I'm just installing it on a second drive? The 200gb is a seperate harddrive from the 500gb.
Re: Hard Drive Can't Mount
Yes install it on a second drive...be sure it's not the windows partition. and read the tutorial link I gave you carefully.
Just some notes, when you install Mint in the 200 GB partition, you'll lose access to that drive in Windows. When you open My Computer in Windows, the 200GB drive won't show up because it is now a linux partition and windows doesn't read linux filesystems. However, when you are in Linux Mint, you'll be able to access all you drices, both windows and linux partition and you'll be allowed to read/write on all partitions as well.
Just some notes, when you install Mint in the 200 GB partition, you'll lose access to that drive in Windows. When you open My Computer in Windows, the 200GB drive won't show up because it is now a linux partition and windows doesn't read linux filesystems. However, when you are in Linux Mint, you'll be able to access all you drices, both windows and linux partition and you'll be allowed to read/write on all partitions as well.