UP 7 ...well but ...missing system fonts [solved]

Archived topics about LMDE 1 and LMDE 2
User avatar
xfrank
Level 5
Level 5
Posts: 616
Joined: Sat Nov 24, 2012 6:09 pm
Location: Mexico City
Contact:

Re: UP 7 ...well but ...missing system fonts [almost SOLVED]

Post by xfrank »

killer de bug wrote:I have the same file...
so, this is probably a bug in UP 7.

I just notice that home ./fonts is there.
Active Distros in my computers: LM21.1 (Mate,Xfce); MXLinux (Xfce)
User avatar
xfrank
Level 5
Level 5
Posts: 616
Joined: Sat Nov 24, 2012 6:09 pm
Location: Mexico City
Contact:

Re: UP 7 ...well but ...missing system fonts [almost SOLVED]

Post by xfrank »

wait... I think I solved this issue.

I reinstalled again the fontconfig packages. Then I added this line to the file fonts.conf:

Code: Select all

	<dir>/home/xfrank/.fonts</dir>
And also <dir>/xfrank/.fonts</dir>
Now the "missing" fonts are recognized by the system! :P
Active Distros in my computers: LM21.1 (Mate,Xfce); MXLinux (Xfce)
milan0markovic

Re: UP 7 ...well but ...missing system fonts [almost SOLVED]

Post by milan0markovic »

@xfrank
can you please post a step by step howto for us newbies?
User avatar
xfrank
Level 5
Level 5
Posts: 616
Joined: Sat Nov 24, 2012 6:09 pm
Location: Mexico City
Contact:

Re: UP 7 ...well but ...missing system fonts [almost SOLVED]

Post by xfrank »

Well, I'm not an expert either. :lol: I solved this issue by trying, following my logic and with the help of some forumists. The last steps to fix all is in this thread:

http://forums.linuxmint.com/viewtopic.php?f=219&t=147064

In the end, my advice is to reinstall several times by synaptic the fontconfig packages. Reinstall the windows core fonts. Install the font bitstream vera. And, most important, check the fonts.conf file in the etc/fonts directory. Compare this file with mine (is ok now):

Code: Select all

 <?xml version="1.0"?>
<!DOCTYPE fontconfig SYSTEM "fonts.dtd">
<!-- /etc/fonts/fonts.conf file to configure system font access -->
<fontconfig>

<!--
	DO NOT EDIT THIS FILE.
	IT WILL BE REPLACED WHEN FONTCONFIG IS UPDATED.
	LOCAL CHANGES BELONG IN 'local.conf'.

	The intent of this standard configuration file is to be adequate for
	most environments.  If you have a reasonably normal environment and
	have found problems with this configuration, they are probably
	things that others will also want fixed.  Please submit any
	problems to the fontconfig bugzilla system located at fontconfig.org

	Note that the normal 'make install' procedure for fontconfig is to
	replace any existing fonts.conf file with the new version.  Place
	any local customizations in local.conf which this file references.

	Keith Packard
-->

<!-- Font directory list -->

	<dir>/usr/share/fonts</dir>
	<dir>/usr/X11R6/lib/X11/fonts</dir> <dir>/usr/local/share/fonts</dir>
	<dir prefix="xdg">.fonts</dir>
	<!-- the following element will be removed in the future -->
	<dir>~/.fonts</dir>
	
<!--
  Accept deprecated 'mono' alias, replacing it with 'monospace'
-->
	<match target="pattern">
		<test qual="any" name="family">
			<string>mono</string>
		</test>
		<edit name="family" mode="assign" binding="same">
			<string>monospace</string>
		</edit>
	</match>

<!--
  Accept alternate 'sans serif' spelling, replacing it with 'sans-serif'
-->
	<match target="pattern">
		<test qual="any" name="family">
			<string>sans serif</string>
		</test>
		<edit name="family" mode="assign" binding="same">
			<string>sans-serif</string>
		</edit>
	</match>

<!--
  Accept deprecated 'sans' alias, replacing it with 'sans-serif'
-->
	<match target="pattern">
		<test qual="any" name="family">
			<string>sans</string>
		</test>
		<edit name="family" mode="assign" binding="same">
			<string>sans-serif</string>
		</edit>
	</match>

<!--
  Load local system customization file
-->
	<include ignore_missing="yes">/etc/fonts/conf.d</include>
	<include ignore_missing="yes">/etc/fonts/conf.avail</include>

<!-- Font cache directory list -->

	<cachedir>/var/cache/fontconfig</cachedir>
	<cachedir prefix="xdg">fontconfig</cachedir>
	<!-- the following element will be removed in the future -->
	<cachedir>~/.fontconfig</cachedir>

	<config>
<!--
  These are the default Unicode chars that are expected to be blank
  in fonts.  All other blank chars are assumed to be broken and
  won't appear in the resulting charsets
 -->
		<blank>
			<int>0x0020</int>	<!-- SPACE -->
			<int>0x00A0</int>	<!-- NO-BREAK SPACE -->
			<int>0x00AD</int>	<!-- SOFT HYPHEN -->
			<int>0x034F</int>	<!-- COMBINING GRAPHEME JOINER -->
			<int>0x0600</int>	<!-- ARABIC NUMBER SIGN -->
			<int>0x0601</int>	<!-- ARABIC SIGN SANAH -->
			<int>0x0602</int>	<!-- ARABIC FOOTNOTE MARKER -->
			<int>0x0603</int>	<!-- ARABIC SIGN SAFHA -->
			<int>0x06DD</int>	<!-- ARABIC END OF AYAH -->
			<int>0x070F</int>	<!-- SYRIAC ABBREVIATION MARK -->
			<int>0x115F</int>	<!-- HANGUL CHOSEONG FILLER -->
			<int>0x1160</int>	<!-- HANGUL JUNGSEONG FILLER -->
			<int>0x1680</int>	<!-- OGHAM SPACE MARK -->
			<int>0x17B4</int>	<!-- KHMER VOWEL INHERENT AQ -->
			<int>0x17B5</int>	<!-- KHMER VOWEL INHERENT AA -->
			<int>0x180E</int>	<!-- MONGOLIAN VOWEL SEPARATOR -->
			<int>0x2000</int>	<!-- EN QUAD -->
			<int>0x2001</int>	<!-- EM QUAD -->
			<int>0x2002</int>	<!-- EN SPACE -->
			<int>0x2003</int>	<!-- EM SPACE -->
			<int>0x2004</int>	<!-- THREE-PER-EM SPACE -->
			<int>0x2005</int>	<!-- FOUR-PER-EM SPACE -->
			<int>0x2006</int>	<!-- SIX-PER-EM SPACE -->
			<int>0x2007</int>	<!-- FIGURE SPACE -->
			<int>0x2008</int>	<!-- PUNCTUATION SPACE -->
			<int>0x2009</int>	<!-- THIN SPACE -->
			<int>0x200A</int>	<!-- HAIR SPACE -->
			<int>0x200B</int>	<!-- ZERO WIDTH SPACE -->
			<int>0x200C</int>	<!-- ZERO WIDTH NON-JOINER -->
			<int>0x200D</int>	<!-- ZERO WIDTH JOINER -->
			<int>0x200E</int>	<!-- LEFT-TO-RIGHT MARK -->
			<int>0x200F</int>	<!-- RIGHT-TO-LEFT MARK -->
			<int>0x2028</int>	<!-- LINE SEPARATOR -->
			<int>0x2029</int>	<!-- PARAGRAPH SEPARATOR -->
			<int>0x202A</int>	<!-- LEFT-TO-RIGHT EMBEDDING -->
			<int>0x202B</int>	<!-- RIGHT-TO-LEFT EMBEDDING -->
			<int>0x202C</int>	<!-- POP DIRECTIONAL FORMATTING -->
			<int>0x202D</int>	<!-- LEFT-TO-RIGHT OVERRIDE -->
			<int>0x202E</int>	<!-- RIGHT-TO-LEFT OVERRIDE -->
			<int>0x202F</int>	<!-- NARROW NO-BREAK SPACE -->
			<int>0x205F</int>	<!-- MEDIUM MATHEMATICAL SPACE -->
			<int>0x2060</int>	<!-- WORD JOINER -->
			<int>0x2061</int>	<!-- FUNCTION APPLICATION -->
			<int>0x2062</int>	<!-- INVISIBLE TIMES -->
			<int>0x2063</int>	<!-- INVISIBLE SEPARATOR -->
			<int>0x206A</int>	<!-- INHIBIT SYMMETRIC SWAPPING -->
			<int>0x206B</int>	<!-- ACTIVATE SYMMETRIC SWAPPING -->
			<int>0x206C</int>	<!-- INHIBIT ARABIC FORM SHAPING -->
			<int>0x206D</int>	<!-- ACTIVATE ARABIC FORM SHAPING -->
			<int>0x206E</int>	<!-- NATIONAL DIGIT SHAPES -->
			<int>0x206F</int>	<!-- NOMINAL DIGIT SHAPES -->
			<int>0x2800</int>	<!-- BRAILLE PATTERN BLANK -->
			<int>0x3000</int>	<!-- IDEOGRAPHIC SPACE -->
			<int>0x3164</int>	<!-- HANGUL FILLER -->
			<int>0xFEFF</int>	<!-- ZERO WIDTH NO-BREAK SPACE -->
			<int>0xFFA0</int>	<!-- HALFWIDTH HANGUL FILLER -->
			<int>0xFFF9</int>	<!-- INTERLINEAR ANNOTATION ANCHOR -->
			<int>0xFFFA</int>	<!-- INTERLINEAR ANNOTATION SEPARATOR -->
			<int>0xFFFB</int>	<!-- INTERLINEAR ANNOTATION TERMINATOR -->
		</blank>
<!--
  Rescan configuration every 30 seconds when FcFontSetList is called
 -->
		<rescan>
			<int>30</int>
		</rescan>
	</config>

</fontconfig>
If you find any difference with yours, probably the system can't read correctly this file. To find errors, open the terminal and write: fc-match sans

You can try to rename fonts.conf to fonts.conf.old. Then reinstall fontconfig packages, restart the pc, rename again fonts.conf.old to fonts.conf (fontconfig don't generate a new file), clean the font cache (fc-cache -f -v), restart the pc again. This can fix the "system don't see the installed fonts anymore" issue.

If you have any specifical issue, post it here or in a new thread. :)
Active Distros in my computers: LM21.1 (Mate,Xfce); MXLinux (Xfce)
pseudomorph
Level 1
Level 1
Posts: 7
Joined: Mon Mar 14, 2011 1:09 am

Re: UP 7 ...well but ...missing system fonts [solved]

Post by pseudomorph »

For anyone who arrives here by searching for this particular error (or similar), see this blogpost which should provide a solution: http://cixtor.com/blog/fontconfig-warning
Locked

Return to “LMDE Archive”