Can't access or eject (some) USB storage after UP 7 [SOLVED]
Forum rules
LMDE 2 has reached end of support as of 1-1-2019
LMDE 2 has reached end of support as of 1-1-2019
Can't access or eject (some) USB storage after UP 7 [SOLVED]
Except for some minor boot issues, LMDE has been running fine on this laptop since I purchased it 2+ years ago. However, after applying UP 7 I am having issues with USB mass storage devices. Running LMDE + UP 7 + cinnamon.
Specifically, I can not access the storage space on multiple Android phones and tablets. USB sticks and a USB hard drive still work fine. The phones and tablets still appear in nemo but now can not be accessed - I see them listed but can not open them. They also can not be ejected/safely removed.
Sorry if this has been covered but I have not seen this mentioned, and it only became an issue after UP 7. I saw one mention of someone not being bale to eject a USB drive but no mention of anything to this extent. I am a happy LMDE user and Mint promoter since 2007 but not a developer or Linux expert, so I am sorry for not providing more relevant technical information. Any clues?
Specifically, I can not access the storage space on multiple Android phones and tablets. USB sticks and a USB hard drive still work fine. The phones and tablets still appear in nemo but now can not be accessed - I see them listed but can not open them. They also can not be ejected/safely removed.
Sorry if this has been covered but I have not seen this mentioned, and it only became an issue after UP 7. I saw one mention of someone not being bale to eject a USB drive but no mention of anything to this extent. I am a happy LMDE user and Mint promoter since 2007 but not a developer or Linux expert, so I am sorry for not providing more relevant technical information. Any clues?
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 2 times in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Re: Can't access or eject (some) USB storage after UP 7
I have the same problems after UP7 with Mate,
one is mentioned in
http://forums.linuxmint.com/viewtopic.php?f=198&t=146167
the other in
http://forums.linuxmint.com/viewtopic.php?f=198&t=146165
The interesting part is that you are using Cinnamon while I am using Mate which means that the problem is not Caja/Nautilus/Nemo, it has to be situated higher up.
Since UP7 my external drives are mounted differently. Before the appeared under /media/DRIVENAME, now they are at /media/USERNAME/DRIVENAME. The Digital Camera does not appear in /media/USERNAME at all (I think it did before in /media, but I am not sure), it only appears in Places.
Do you have the same change in Cinnamon?
one is mentioned in
http://forums.linuxmint.com/viewtopic.php?f=198&t=146167
the other in
http://forums.linuxmint.com/viewtopic.php?f=198&t=146165
The interesting part is that you are using Cinnamon while I am using Mate which means that the problem is not Caja/Nautilus/Nemo, it has to be situated higher up.
Since UP7 my external drives are mounted differently. Before the appeared under /media/DRIVENAME, now they are at /media/USERNAME/DRIVENAME. The Digital Camera does not appear in /media/USERNAME at all (I think it did before in /media, but I am not sure), it only appears in Places.
Do you have the same change in Cinnamon?
Re: Can't access or eject (some) USB storage after UP 7
I don't know for sure, but here's a couple of upstream bugs that may be relevant:uvajed wrote:Specifically, I can not access the storage space on multiple Android phones and tablets. USB sticks and a USB hard drive still work fine. The phones and tablets still appear in nemo but now can not be accessed - I see them listed but can not open them. They also can not be ejected/safely removed.
http://bugs.debian.org/716900
http://bugs.debian.org/716911
There's no fix yet other than simply downgrading gvfs to 1.12 (you can get it from wheezy repo). Downgrading is usually not recommended though, so it's at your own risk.
Re: Can't access or eject (some) USB storage after UP 7
I have the same problem, since UP7, with my Android mobile phone and its internal microSD
I connect it to the laptop, I accept the connection from my mobile phone but I cannot see it listed anywhere as a new device (and even in /media, where in the past was visible, there's no trace)...
I connect it to the laptop, I accept the connection from my mobile phone but I cannot see it listed anywhere as a new device (and even in /media, where in the past was visible, there's no trace)...
LM Cinnamon 64bit
Re: Can't access or eject (some) USB storage after UP 7
How can I do it without downgrading/removing many many packages?Monsta wrote:I don't know for sure, but here's a couple of upstream bugs that may be relevant:uvajed wrote:Specifically, I can not access the storage space on multiple Android phones and tablets. USB sticks and a USB hard drive still work fine. The phones and tablets still appear in nemo but now can not be accessed - I see them listed but can not open them. They also can not be ejected/safely removed.
http://bugs.debian.org/716900
http://bugs.debian.org/716911
There's no fix yet other than simply downgrading gvfs to 1.12 (you can get it from wheezy repo). Downgrading is usually not recommended though, so it's at your own risk.
I have added deb http://ftp.it.debian.org/debian wheezy main to the repo list.... but when I try to downgrade gvfs that's the situation... Too risky!
LM Cinnamon 64bit
Re: Can't access or eject (some) USB storage after UP 7
Synaptic seems to fail at that. Let's use the console tools.
Before downgrading, backup your system partition with Clonezilla or some other tool, just in case.
First, find out all installed gvfs* packages:
Your list is probably the same, but who knows. Now you can downgrade them all by specifying the needed version for each package:
This should not remove brasero, nemo or any other package. If it still wants to do it, press 'n' to cancel the downgrade and post here the results.
If the install was successful, put these packages on hold so they won't be upgraded:
Some time later you might want to unhold them (maybe when the fixed gvfs enters Testing, and you'll want to install it). Unholding is done similarly:
Yeah, and don't forget to remove Wheezy from the sources list when everything is done.
Before downgrading, backup your system partition with Clonezilla or some other tool, just in case.
First, find out all installed gvfs* packages:
Code: Select all
monsta@lmde ~ $ aptitude search '~igvfs'
i gvfs - userspace virtual filesystem - GIO module
i gvfs-backends - userspace virtual filesystem - backends
i gvfs-bin - userspace virtual filesystem - binaries
i gvfs-common - userspace virtual filesystem - common data files
i gvfs-daemons - userspace virtual filesystem - servers
i gvfs-libs - userspace virtual filesystem - private libraries
Code: Select all
sudo apt-get install gvfs=1.12.3-4 gvfs-backends=1.12.3-4 gvfs-bin=1.12.3-4 gvfs-common=1.12.3-4 gvfs-daemons=1.12.3-4 gvfs-libs=1.12.3-4
If the install was successful, put these packages on hold so they won't be upgraded:
Code: Select all
sudo apt-mark hold gvfs gvfs-backends gvfs-bin gvfs-common gvfs-daemons gvfs-libs
Code: Select all
sudo apt-mark unhold gvfs gvfs-backends gvfs-bin gvfs-common gvfs-daemons gvfs-libs
Re: Can't access or eject (some) USB storage after UP 7
same problem here ! android device no longer shows up at all
Re: Can't access or eject (some) USB storage after UP 7
Thanks a lot, Monsta! It works like a charm.Monsta wrote:Synaptic seems to fail at that. Let's use the console tools.
Before downgrading, backup your system partition with Clonezilla or some other tool, just in case.
First, find out all installed gvfs* packages:Your list is probably the same, but who knows. Now you can downgrade them all by specifying the needed version for each package:Code: Select all
monsta@lmde ~ $ aptitude search '~igvfs' i gvfs - userspace virtual filesystem - GIO module i gvfs-backends - userspace virtual filesystem - backends i gvfs-bin - userspace virtual filesystem - binaries i gvfs-common - userspace virtual filesystem - common data files i gvfs-daemons - userspace virtual filesystem - servers i gvfs-libs - userspace virtual filesystem - private libraries
This should not remove brasero, nemo or any other package. If it still wants to do it, press 'n' to cancel the downgrade and post here the results.Code: Select all
sudo apt-get install gvfs=1.12.3-4 gvfs-backends=1.12.3-4 gvfs-bin=1.12.3-4 gvfs-common=1.12.3-4 gvfs-daemons=1.12.3-4 gvfs-libs=1.12.3-4
If the install was successful, put these packages on hold so they won't be upgraded:Some time later you might want to unhold them (maybe when the fixed gvfs enters Testing, and you'll want to install it). Unholding is done similarly:Code: Select all
sudo apt-mark hold gvfs gvfs-backends gvfs-bin gvfs-common gvfs-daemons gvfs-libs
Yeah, and don't forget to remove Wheezy from the sources list when everything is done.Code: Select all
sudo apt-mark unhold gvfs gvfs-backends gvfs-bin gvfs-common gvfs-daemons gvfs-libs
Well..... In the future I should just check if a new version comes... And this I could discover only manually, am I right? (If I have held it, it won't upgrade anymore...)
LM Cinnamon 64bit
Re: Can't access or eject (some) USB storage after UP 7
You can use [url=http://packages.debian.org/search?suite=jessie&keywords=gvfs]packages.debian.org[/url] to find out if there's a new version available in Testing, for example.palimmo wrote:Well..... In the future I should just check if a new version comes... And this I could discover only manually, am I right? (If I have held it, it won't upgrade anymore...)
And use
Code: Select all
apt-cache policy gvfs
Side note: if you'll need to install gvfs-fuse or some other not currently installed gvfs* package, you might need to specify its version (=1.12.3-4) because of the dependencies.
Re: Can't access or eject (some) USB storage after UP 7
excellent!Monsta wrote:You can use [url=http://packages.debian.org/search?suite=jessie&keywords=gvfs]packages.debian.org[/url] to find out if there's a new version available in Testing, for example.palimmo wrote:Well..... In the future I should just check if a new version comes... And this I could discover only manually, am I right? (If I have held it, it won't upgrade anymore...)
And useto get the list of all currently installed and available versions in your repositories.Code: Select all
apt-cache policy gvfs
Side note: if you'll need to install gvfs-fuse or some other not currently installed gvfs* package, you might need to specify its version (=1.12.3-4) because of the dependencies.
LM Cinnamon 64bit
Re: Can't access or eject (some) USB storage after UP 7
Thanks a million Monsta, this worked great for me! I had no idea where to turn. Thanks also to Palimmo and Py-thon. I haven't had a ton of issues with either Mint main or LMDE, but the knowledgeable, friendly folks here have just about always been able to help! Now if I could only get my stupid P.O.S. Toshiba laptop to boot without killing all input devices (sometimes!), I'd have no real problems whatsoever.
So, to summarize, it seems the new version of gvfs included with UP7 was causing issues with some types of USB storage for some of us . Specifically, I could not properly mount/eject SD cards attached to Android devices or when inserted directly into my laptop, while USB sticks and external hard drives still worked fine. Downgrading gvfs-related packages fully solved this.
So, to summarize, it seems the new version of gvfs included with UP7 was causing issues with some types of USB storage for some of us . Specifically, I could not properly mount/eject SD cards attached to Android devices or when inserted directly into my laptop, while USB sticks and external hard drives still worked fine. Downgrading gvfs-related packages fully solved this.
Re: Can't access or eject (some) USB storage after UP 7 [SOL
This is like a very messy method and not ideal for people whom need an efficient machine to get work done . Anyway when I enter
I get
Probably missing some steps ?.
Code: Select all
sudo apt-get install gvfs=1.12.3-4 gvfs-backends=1.12.3-4 gvfs-bin=1.12.3-4 gvfs-common=1.12.3-4 gvfs-daemons=1.12.3-4 gvfs-libs=1.12.3-4
Code: Select all
E: Version '1.12.3-4' for 'gvfs' was not found
E: Version '1.12.3-4' for 'gvfs-backends' was not found
E: Version '1.12.3-4' for 'gvfs-bin' was not found
E: Version '1.12.3-4' for 'gvfs-common' was not found
E: Version '1.12.3-4' for 'gvfs-daemons' was not found
E: Version '1.12.3-4' for 'gvfs-libs' was not found
Re: Can't access or eject (some) USB storage after UP 7 [SOL
As well as adding the wheezy repo you'll also need to make sure the 'Backported packages' option is selected .This can be very simply done via the update manager/ software sources /linuxmint software tab .
Re: Can't access or eject (some) USB storage after UP 7 [SOL
A faster solution to this seems to be to just
sudo apt-get install gnome-disk-utility
It worked for me.
sudo apt-get install gnome-disk-utility
It worked for me.
Re: Can't access or eject (some) USB storage after UP 7 [SOL
Does it work automatically when you mount a new device.. without any further step?jhallenb wrote:A faster solution to this seems to be to just
sudo apt-get install gnome-disk-utility
It worked for me.
LM Cinnamon 64bit
Re: Can't access or eject (some) USB storage after UP 7 [SOL
Downgraded gvfs and works like a charm now! Good job!
Re: Can't access or eject (some) USB storage after UP 7 [SOL
waiting for a fixdezo wrote:Downgraded gvfs and works like a charm now! Good job!
Code: Select all
~ $ apt-cache policy gvfs
gvfs:
Installed: 1.12.3-4
Candidate: 1.16.3-1
Version table:
1.16.3-1 0
500 http://mirror.rts-informatique.fr/linuxmint/debian/latest/ testing/main amd64 Packages
*** 1.12.3-4 0
100 /var/lib/dpkg/status
LM Cinnamon 64bit
Re: Can't access or eject (some) USB storage after UP 7 [SOL
May want to try...
had issue of cds and dvds not showing up. Installed package 'udisks-glue'. Its a daemon so test it by running (I use alt+F2) and see if works for your needs. Then can put it in the 'startup apps list' (as a custom command works)
J.Jay
Seems to plague me in most recent Debian (derived) tracking testing/Jessie.
had issue of cds and dvds not showing up. Installed package 'udisks-glue'. Its a daemon so test it by running (I use alt+F2) and see if works for your needs. Then can put it in the 'startup apps list' (as a custom command works)
J.Jay
Seems to plague me in most recent Debian (derived) tracking testing/Jessie.
Re: Can't access or eject (some) USB storage after UP 7 [SOL
Should we wait till the next UP to have this bug solved? That's a bit crappy!
LM Cinnamon 64bit
Re: Can't access or eject (some) USB storage after UP 7 [SOL
ehy! any news?palimmo wrote:Should we wait till the next UP to have this bug solved? That's a bit crappy!
LM Cinnamon 64bit