<SOLVED> Cinnamon going to software rendering for some users

Please post suggestions for improvement of Cinnamon on:
https://github.com/linuxmint/Cinnamon
Forum rules
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Locked
Aqualize

<SOLVED> Cinnamon going to software rendering for some users

Post by Aqualize »

SOLVED: See my post down below: http://forums.linuxmint.com/viewtopic.p ... 73#p906973

I will try to briefly describe to problem and attach logs etc. in the end. But I don't know all the commands you may want output from, I will run some that I've seen during googling the problem. I also write some info if I see any clear distinctions among the outputs.

We run a lot of Dell Optiplex desktop computers and Latitude portables. I've been using Linux Mint since version 12 successfully on desktops. We also use PowerBroker Identity Services Open (PBIS open, you may know it as Likewise open) for authentication againt a Windows Server 2008 R2 with active directory. This gives single-sign-on to file shares, central password management etc.
So now if I use Petra (version 16) and install on a Optiplex 9020 och Latitude E7440 (simple put, they are the latest generation of Intel hardware) it works fine with the local user account.
But if I log in with a windows domain account then Cinnamon will go into software rendering. Doesn't matter if I've already logged in with the local account and logged out/switched user or if the computer is freshly booted. Apart from consuming CPU resources we've seen severe graphis artifacts on the 9020 and some on E7440.
Note that the authentication software with Mint version 15 worked just fine.
I've doubled checked that on the login screen I choose "Cinnamon" as desktop environment for the session, not "Cinnamon (Software Rendering)". When I log in I get the warning balloon up in the right corner.

I also haveMint Petra MATE edition installed on a Optiplex 9020 here, which doesn't experience any troubles (but I don't know if MATE use hardware rendering).

I've created a second local account, logged in and directly logged out (it works fine). Then used an previously unused domain account and done the same. Checked and their home folders size differed only by a few dozen bytes.

Also, the Quit dialog (for shutting down the computer) lacks all buttons exception Cancel while using a domain account (also new problem in Petra). This affects MATE also. I've added the domain account to all the groups in /etc/group that the local account has. But this is not my primary concern.

Outputs:


inxi -Fx
Main difference is GLX Renderer
Fresh boot - logging in with a domain account (that is: getting software rendering)

Code: Select all

System:    Host: mariap-l3 Kernel: 3.11.0-15-generic x86_64 (64 bit, gcc: 4.8.1) Desktop: Gnome Distro: Linux Mint 16 Petra
Machine:   System: Dell product: Latitude E7440 version: 01
           Mobo: Dell model: 07F3F4 version: A00 Bios: Dell version: A07 date: 01/02/2014
CPU:       Dual core Intel Core i7-4600U CPU (-HT-MCP-) cache: 4096 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 10774.6 
           Clock Speeds: 1: 756.00 MHz 2: 756.00 MHz 3: 756.00 MHz 4: 756.00 MHz
Graphics:  Card: Intel Haswell-ULT Integrated Graphics Controller bus-ID: 00:02.0 
           X.Org: 1.14.3 drivers: intel (unloaded: fbdev,vesa) Resolution: 1920x1080@60.0hz 
           GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 3.3, 256 bits) GLX Version: 2.1 Mesa 9.2.1 Direct Rendering: Yes
Audio:     Card-1: Intel Lynx Point-LP HD Audio Controller driver: snd_hda_intel bus-ID: 00:1b.0
           Card-2: Intel Device 0a0c driver: snd_hda_intel bus-ID: 00:03.0
           Sound: Advanced Linux Sound Architecture ver: k3.11.0-15-generic
Network:   Card-1: Intel Ethernet Connection I218-LM driver: e1000e ver: 2.3.2-k port: f080 bus-ID: 00:19.0
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: ec:f4:bb:0b:c9:07
           Card-2: Intel Wireless 7260 driver: iwlwifi ver: in-tree: bus-ID: 02:00.0
           IF: wlan0 state: down mac: fc:f8:ae:b3:c3:f6
Drives:    HDD Total Size: 128.0GB (15.9% used) 1: id: /dev/sda model: LITEONIT_LMT size: 128.0GB 
Partition: ID: / size: 102G used: 19G (20%) fs: ext4 ID: /boot size: 236M used: 81M (37%) fs: ext2 
           ID: swap-1 size: 17.08GB used: 0.00GB (0%) fs: swap 
RAID:      No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors:   System Temperatures: cpu: 54.0C mobo: N/A 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 185 Uptime: 4 min Memory: 480.2/15955.4MB Runlevel: 2 Gcc sys: 4.8.1 Client: Shell inxi: 1.8.4
Fresh boot - logging in with a local account (that is: no problems)

Code: Select all

System:    Host: mariap-l3 Kernel: 3.11.0-15-generic x86_64 (64 bit, gcc: 4.8.1) Desktop: Gnome Distro: Linux Mint 16 Petra
Machine:   System: Dell product: Latitude E7440 version: 01
           Mobo: Dell model: 07F3F4 version: A00 Bios: Dell version: A07 date: 01/02/2014
CPU:       Dual core Intel Core i7-4600U CPU (-HT-MCP-) cache: 4096 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 10775.1 
           Clock Speeds: 1: 756.00 MHz 2: 756.00 MHz 3: 756.00 MHz 4: 756.00 MHz
Graphics:  Card: Intel Haswell-ULT Integrated Graphics Controller bus-ID: 00:02.0 
           X.Org: 1.14.3 drivers: intel (unloaded: fbdev,vesa) Resolution: 1920x1080@60.0hz 
           GLX Renderer: Mesa DRI Intel Haswell Mobile GLX Version: 3.0 Mesa 9.2.1 Direct Rendering: Yes
Audio:     Card-1: Intel Lynx Point-LP HD Audio Controller driver: snd_hda_intel bus-ID: 00:1b.0
           Card-2: Intel Device 0a0c driver: snd_hda_intel bus-ID: 00:03.0
           Sound: Advanced Linux Sound Architecture ver: k3.11.0-15-generic
Network:   Card-1: Intel Ethernet Connection I218-LM driver: e1000e ver: 2.3.2-k port: f080 bus-ID: 00:19.0
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: ec:f4:bb:0b:c9:07
           Card-2: Intel Wireless 7260 driver: iwlwifi ver: in-tree: bus-ID: 02:00.0
           IF: wlan0 state: down mac: fc:f8:ae:b3:c3:f6
Drives:    HDD Total Size: 128.0GB (15.9% used) 1: id: /dev/sda model: LITEONIT_LMT size: 128.0GB 
Partition: ID: / size: 102G used: 19G (20%) fs: ext4 ID: /boot size: 236M used: 81M (37%) fs: ext2 
           ID: swap-1 size: 17.08GB used: 0.00GB (0%) fs: swap 
RAID:      No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors:   System Temperatures: cpu: 48.0C mobo: N/A 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 184 Uptime: 1 min Memory: 391.0/15955.4MB Runlevel: 2 Gcc sys: 4.8.1 Client: Shell inxi: 1.8.4

glxinfo
Main interest is the OpenGL properties (and no, the machine is not running as either guest or host for VMware virtualization products).
Fresh boot - logging in with a domain account (that is: getting software rendering)
The two first lines here I got on stderr, the rest comes from stdout

Code: Select all

libGL error: failed to load driver: i965
libGL error: Try again with LIBGL_DEBUG=verbose for more details.
name of display: :0
display: :0  screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
server glx extensions:
    GLX_ARB_create_context, GLX_ARB_create_context_profile, 
    GLX_ARB_multisample, GLX_EXT_create_context_es2_profile, 
    GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_EXT_visual_info, 
    GLX_EXT_visual_rating, GLX_INTEL_swap_event, GLX_MESA_copy_sub_buffer, 
    GLX_OML_swap_method, GLX_SGIS_multisample, GLX_SGIX_fbconfig, 
    GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group, GLX_SGI_swap_control
client glx vendor string: Mesa Project and SGI
client glx version string: 1.4
client glx extensions:
    GLX_ARB_create_context, GLX_ARB_create_context_profile, 
    GLX_ARB_create_context_robustness, GLX_ARB_fbconfig_float, 
    GLX_ARB_framebuffer_sRGB, GLX_ARB_get_proc_address, GLX_ARB_multisample, 
    GLX_EXT_create_context_es2_profile, GLX_EXT_fbconfig_packed_float, 
    GLX_EXT_framebuffer_sRGB, GLX_EXT_import_context, 
    GLX_EXT_texture_from_pixmap, GLX_EXT_visual_info, GLX_EXT_visual_rating, 
    GLX_INTEL_swap_event, GLX_MESA_copy_sub_buffer, 
    GLX_MESA_multithread_makecurrent, GLX_MESA_swap_control, 
    GLX_OML_swap_method, GLX_OML_sync_control, GLX_SGIS_multisample, 
    GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group, 
    GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync
GLX version: 1.4
GLX extensions:
    GLX_ARB_create_context, GLX_ARB_create_context_profile, 
    GLX_ARB_get_proc_address, GLX_ARB_multisample, 
    GLX_EXT_create_context_es2_profile, GLX_EXT_import_context, 
    GLX_EXT_texture_from_pixmap, GLX_EXT_visual_info, GLX_EXT_visual_rating, 
    GLX_MESA_multithread_makecurrent, GLX_OML_swap_method, 
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, 
    GLX_SGIX_visual_select_group, GLX_SGI_make_current_read
OpenGL vendor string: VMware, Inc.
OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 3.3, 256 bits)
OpenGL version string: 2.1 Mesa 9.2.1
OpenGL shading language version string: 1.30
OpenGL extensions:
    GL_AMD_conservative_depth, GL_AMD_draw_buffers_blend, 
    GL_APPLE_packed_pixels, GL_APPLE_vertex_array_object, 
    GL_ARB_ES2_compatibility, GL_ARB_blend_func_extended, 
    GL_ARB_color_buffer_float, GL_ARB_conservative_depth, GL_ARB_copy_buffer, 
    GL_ARB_debug_output, GL_ARB_depth_buffer_float, GL_ARB_depth_texture, 
    GL_ARB_draw_buffers, GL_ARB_draw_buffers_blend, 
    GL_ARB_draw_elements_base_vertex, GL_ARB_draw_instanced, 
    GL_ARB_explicit_attrib_location, GL_ARB_fragment_coord_conventions, 
    GL_ARB_fragment_program, GL_ARB_fragment_program_shadow, 
    GL_ARB_fragment_shader, GL_ARB_framebuffer_object, 
    GL_ARB_framebuffer_sRGB, GL_ARB_get_program_binary, 
    GL_ARB_half_float_pixel, GL_ARB_half_float_vertex, 
    GL_ARB_instanced_arrays, GL_ARB_internalformat_query, 
    GL_ARB_invalidate_subdata, GL_ARB_map_buffer_range, GL_ARB_multisample, 
    GL_ARB_multitexture, GL_ARB_occlusion_query, GL_ARB_occlusion_query2, 
    GL_ARB_pixel_buffer_object, GL_ARB_point_parameters, GL_ARB_point_sprite, 
    GL_ARB_provoking_vertex, GL_ARB_robustness, GL_ARB_sampler_objects, 
    GL_ARB_shader_bit_encoding, GL_ARB_shader_objects, 
    GL_ARB_shader_texture_lod, GL_ARB_shading_language_100, 
    GL_ARB_shading_language_420pack, GL_ARB_shading_language_packing, 
    GL_ARB_shadow, GL_ARB_sync, GL_ARB_texture_border_clamp, 
    GL_ARB_texture_compression, GL_ARB_texture_compression_rgtc, 
    GL_ARB_texture_cube_map, GL_ARB_texture_env_add, 
    GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar, 
    GL_ARB_texture_env_dot3, GL_ARB_texture_float, 
    GL_ARB_texture_mirrored_repeat, GL_ARB_texture_non_power_of_two, 
    GL_ARB_texture_rectangle, GL_ARB_texture_rg, GL_ARB_texture_rgb10_a2ui, 
    GL_ARB_texture_storage, GL_ARB_texture_swizzle, GL_ARB_timer_query, 
    GL_ARB_transform_feedback2, GL_ARB_transform_feedback3, 
    GL_ARB_transform_feedback_instanced, GL_ARB_transpose_matrix, 
    GL_ARB_uniform_buffer_object, GL_ARB_vertex_array_bgra, 
    GL_ARB_vertex_array_object, GL_ARB_vertex_buffer_object, 
    GL_ARB_vertex_program, GL_ARB_vertex_shader, 
    GL_ARB_vertex_type_2_10_10_10_rev, GL_ARB_window_pos, 
    GL_ATI_blend_equation_separate, GL_ATI_draw_buffers, 
    GL_ATI_separate_stencil, GL_ATI_texture_compression_3dc, 
    GL_ATI_texture_env_combine3, GL_ATI_texture_float, 
    GL_ATI_texture_mirror_once, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color, 
    GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate, 
    GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_compiled_vertex_array, 
    GL_EXT_copy_texture, GL_EXT_draw_buffers2, GL_EXT_draw_instanced, 
    GL_EXT_draw_range_elements, GL_EXT_fog_coord, GL_EXT_framebuffer_blit, 
    GL_EXT_framebuffer_object, GL_EXT_framebuffer_sRGB, 
    GL_EXT_gpu_program_parameters, GL_EXT_multi_draw_arrays, 
    GL_EXT_packed_depth_stencil, GL_EXT_packed_float, GL_EXT_packed_pixels, 
    GL_EXT_pixel_buffer_object, GL_EXT_point_parameters, 
    GL_EXT_polygon_offset, GL_EXT_provoking_vertex, GL_EXT_rescale_normal, 
    GL_EXT_secondary_color, GL_EXT_separate_specular_color, 
    GL_EXT_shadow_funcs, GL_EXT_stencil_two_side, GL_EXT_stencil_wrap, 
    GL_EXT_subtexture, GL_EXT_texture, GL_EXT_texture3D, 
    GL_EXT_texture_array, GL_EXT_texture_compression_latc, 
    GL_EXT_texture_compression_rgtc, GL_EXT_texture_cube_map, 
    GL_EXT_texture_edge_clamp, GL_EXT_texture_env_add, 
    GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3, 
    GL_EXT_texture_integer, GL_EXT_texture_lod_bias, 
    GL_EXT_texture_mirror_clamp, GL_EXT_texture_object, 
    GL_EXT_texture_rectangle, GL_EXT_texture_sRGB, GL_EXT_texture_sRGB_decode, 
    GL_EXT_texture_shared_exponent, GL_EXT_texture_snorm, 
    GL_EXT_texture_swizzle, GL_EXT_timer_query, GL_EXT_transform_feedback, 
    GL_EXT_vertex_array, GL_EXT_vertex_array_bgra, 
    GL_IBM_multimode_draw_arrays, GL_IBM_rasterpos_clip, 
    GL_IBM_texture_mirrored_repeat, GL_INGR_blend_func_separate, 
    GL_MESA_pack_invert, GL_MESA_texture_array, GL_MESA_texture_signed_rgba, 
    GL_MESA_window_pos, GL_MESA_ycbcr_texture, GL_NV_blend_square, 
    GL_NV_conditional_render, GL_NV_fog_distance, GL_NV_light_max_exponent, 
    GL_NV_packed_depth_stencil, GL_NV_primitive_restart, 
    GL_NV_texgen_reflection, GL_NV_texture_env_combine4, 
    GL_NV_texture_rectangle, GL_OES_EGL_image, GL_OES_read_format, 
    GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp, 
    GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SUN_multi_draw_arrays

12 GLX Visuals
    visual  x   bf lv rg d st  colorbuffer  sr ax dp st accumbuffer  ms  cav
  id dep cl sp  sz l  ci b ro  r  g  b  a F gb bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------------
0x020 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x021 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x08c 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None
0x08d 24 tc  0  32  0 r  . .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None
0x08e 24 tc  0  32  0 r  . .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x08f 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8 16 16 16 16  0 0 Slow
0x094 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None
0x095 24 dc  0  32  0 r  . .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None
0x096 24 dc  0  32  0 r  . .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x097 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x098 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8 16 16 16 16  0 0 Slow
0x05f 32 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None

28 GLXFBConfigs:
    visual  x   bf lv rg d st  colorbuffer  sr ax dp st accumbuffer  ms  cav
  id dep cl sp  sz l  ci b ro  r  g  b  a F gb bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------------
0x060  0 tc  0  16  0 r  y .   5  6  5  0 .  .  0  0  0  0  0  0  0  0 0 None
0x061  0 tc  0  16  0 r  . .   5  6  5  0 .  .  0  0  0  0  0  0  0  0 0 None
0x062  0 tc  0  16  0 r  y .   5  6  5  0 .  .  0 16  0  0  0  0  0  0 0 None
0x063  0 tc  0  16  0 r  . .   5  6  5  0 .  .  0 16  0  0  0  0  0  0 0 None
0x064  0 tc  0  16  0 r  y .   5  6  5  0 .  .  0 24  8  0  0  0  0  0 0 None
0x065  0 tc  0  16  0 r  . .   5  6  5  0 .  .  0 24  8  0  0  0  0  0 0 None
0x066 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None
0x067 24 tc  0  32  0 r  . .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None
0x068 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x069 24 tc  0  32  0 r  . .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x06a  0 tc  0  16  0 r  y .   5  6  5  0 .  .  0 16  0  0  0  0  0  0 0 None
0x06b  0 tc  0  16  0 r  y .   5  6  5  0 .  .  0 16  0 16 16 16  0  0 0 Slow
0x06c 32 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x06d 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8 16 16 16 16  0 0 Slow
0x076  0 dc  0  16  0 r  y .   5  6  5  0 .  .  0  0  0  0  0  0  0  0 0 None
0x077  0 dc  0  16  0 r  . .   5  6  5  0 .  .  0  0  0  0  0  0  0  0 0 None
0x078  0 dc  0  16  0 r  y .   5  6  5  0 .  .  0 16  0  0  0  0  0  0 0 None
0x079  0 dc  0  16  0 r  . .   5  6  5  0 .  .  0 16  0  0  0  0  0  0 0 None
0x07a  0 dc  0  16  0 r  y .   5  6  5  0 .  .  0 24  8  0  0  0  0  0 0 None
0x07b  0 dc  0  16  0 r  . .   5  6  5  0 .  .  0 24  8  0  0  0  0  0 0 None
0x07c 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None
0x07d 24 dc  0  32  0 r  . .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None
0x07e 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x07f 24 dc  0  32  0 r  . .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x080  0 dc  0  16  0 r  y .   5  6  5  0 .  .  0 16  0  0  0  0  0  0 0 None
0x081  0 dc  0  16  0 r  y .   5  6  5  0 .  .  0 16  0 16 16 16  0  0 0 Slow
0x082 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x083 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8 16 16 16 16  0 0 Slow
Fresh boot - logging in with a local account (that is: no problems)

Code: Select all

libGL error: failed to load driver: i965
libGL error: Try again with LIBGL_DEBUG=verbose for more details.
name of display: :0
display: :0  screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
server glx extensions:
    GLX_ARB_create_context, GLX_ARB_create_context_profile, 
    GLX_ARB_multisample, GLX_EXT_create_context_es2_profile, 
    GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_EXT_visual_info, 
    GLX_EXT_visual_rating, GLX_INTEL_swap_event, GLX_MESA_copy_sub_buffer, 
    GLX_OML_swap_method, GLX_SGIS_multisample, GLX_SGIX_fbconfig, 
    GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group, GLX_SGI_swap_control
client glx vendor string: Mesa Project and SGI
client glx version string: 1.4
client glx extensions:
    GLX_ARB_create_context, GLX_ARB_create_context_profile, 
    GLX_ARB_create_context_robustness, GLX_ARB_fbconfig_float, 
    GLX_ARB_framebuffer_sRGB, GLX_ARB_get_proc_address, GLX_ARB_multisample, 
    GLX_EXT_create_context_es2_profile, GLX_EXT_fbconfig_packed_float, 
    GLX_EXT_framebuffer_sRGB, GLX_EXT_import_context, 
    GLX_EXT_texture_from_pixmap, GLX_EXT_visual_info, GLX_EXT_visual_rating, 
    GLX_INTEL_swap_event, GLX_MESA_copy_sub_buffer, 
    GLX_MESA_multithread_makecurrent, GLX_MESA_swap_control, 
    GLX_OML_swap_method, GLX_OML_sync_control, GLX_SGIS_multisample, 
    GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group, 
    GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync
GLX version: 1.4
GLX extensions:
    GLX_ARB_create_context, GLX_ARB_create_context_profile, 
    GLX_ARB_get_proc_address, GLX_ARB_multisample, 
    GLX_EXT_create_context_es2_profile, GLX_EXT_import_context, 
    GLX_EXT_texture_from_pixmap, GLX_EXT_visual_info, GLX_EXT_visual_rating, 
    GLX_MESA_multithread_makecurrent, GLX_OML_swap_method, 
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, 
    GLX_SGIX_visual_select_group, GLX_SGI_make_current_read
OpenGL vendor string: VMware, Inc.
OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 3.3, 256 bits)
OpenGL version string: 2.1 Mesa 9.2.1
OpenGL shading language version string: 1.30
OpenGL extensions:
    GL_AMD_conservative_depth, GL_AMD_draw_buffers_blend, 
    GL_APPLE_packed_pixels, GL_APPLE_vertex_array_object, 
    GL_ARB_ES2_compatibility, GL_ARB_blend_func_extended, 
    GL_ARB_color_buffer_float, GL_ARB_conservative_depth, GL_ARB_copy_buffer, 
    GL_ARB_debug_output, GL_ARB_depth_buffer_float, GL_ARB_depth_texture, 
    GL_ARB_draw_buffers, GL_ARB_draw_buffers_blend, 
    GL_ARB_draw_elements_base_vertex, GL_ARB_draw_instanced, 
    GL_ARB_explicit_attrib_location, GL_ARB_fragment_coord_conventions, 
    GL_ARB_fragment_program, GL_ARB_fragment_program_shadow, 
    GL_ARB_fragment_shader, GL_ARB_framebuffer_object, 
    GL_ARB_framebuffer_sRGB, GL_ARB_get_program_binary, 
    GL_ARB_half_float_pixel, GL_ARB_half_float_vertex, 
    GL_ARB_instanced_arrays, GL_ARB_internalformat_query, 
    GL_ARB_invalidate_subdata, GL_ARB_map_buffer_range, GL_ARB_multisample, 
    GL_ARB_multitexture, GL_ARB_occlusion_query, GL_ARB_occlusion_query2, 
    GL_ARB_pixel_buffer_object, GL_ARB_point_parameters, GL_ARB_point_sprite, 
    GL_ARB_provoking_vertex, GL_ARB_robustness, GL_ARB_sampler_objects, 
    GL_ARB_shader_bit_encoding, GL_ARB_shader_objects, 
    GL_ARB_shader_texture_lod, GL_ARB_shading_language_100, 
    GL_ARB_shading_language_420pack, GL_ARB_shading_language_packing, 
    GL_ARB_shadow, GL_ARB_sync, GL_ARB_texture_border_clamp, 
    GL_ARB_texture_compression, GL_ARB_texture_compression_rgtc, 
    GL_ARB_texture_cube_map, GL_ARB_texture_env_add, 
    GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar, 
    GL_ARB_texture_env_dot3, GL_ARB_texture_float, 
    GL_ARB_texture_mirrored_repeat, GL_ARB_texture_non_power_of_two, 
    GL_ARB_texture_rectangle, GL_ARB_texture_rg, GL_ARB_texture_rgb10_a2ui, 
    GL_ARB_texture_storage, GL_ARB_texture_swizzle, GL_ARB_timer_query, 
    GL_ARB_transform_feedback2, GL_ARB_transform_feedback3, 
    GL_ARB_transform_feedback_instanced, GL_ARB_transpose_matrix, 
    GL_ARB_uniform_buffer_object, GL_ARB_vertex_array_bgra, 
    GL_ARB_vertex_array_object, GL_ARB_vertex_buffer_object, 
    GL_ARB_vertex_program, GL_ARB_vertex_shader, 
    GL_ARB_vertex_type_2_10_10_10_rev, GL_ARB_window_pos, 
    GL_ATI_blend_equation_separate, GL_ATI_draw_buffers, 
    GL_ATI_separate_stencil, GL_ATI_texture_compression_3dc, 
    GL_ATI_texture_env_combine3, GL_ATI_texture_float, 
    GL_ATI_texture_mirror_once, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color, 
    GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate, 
    GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_compiled_vertex_array, 
    GL_EXT_copy_texture, GL_EXT_draw_buffers2, GL_EXT_draw_instanced, 
    GL_EXT_draw_range_elements, GL_EXT_fog_coord, GL_EXT_framebuffer_blit, 
    GL_EXT_framebuffer_object, GL_EXT_framebuffer_sRGB, 
    GL_EXT_gpu_program_parameters, GL_EXT_multi_draw_arrays, 
    GL_EXT_packed_depth_stencil, GL_EXT_packed_float, GL_EXT_packed_pixels, 
    GL_EXT_pixel_buffer_object, GL_EXT_point_parameters, 
    GL_EXT_polygon_offset, GL_EXT_provoking_vertex, GL_EXT_rescale_normal, 
    GL_EXT_secondary_color, GL_EXT_separate_specular_color, 
    GL_EXT_shadow_funcs, GL_EXT_stencil_two_side, GL_EXT_stencil_wrap, 
    GL_EXT_subtexture, GL_EXT_texture, GL_EXT_texture3D, 
    GL_EXT_texture_array, GL_EXT_texture_compression_latc, 
    GL_EXT_texture_compression_rgtc, GL_EXT_texture_cube_map, 
    GL_EXT_texture_edge_clamp, GL_EXT_texture_env_add, 
    GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3, 
    GL_EXT_texture_integer, GL_EXT_texture_lod_bias, 
    GL_EXT_texture_mirror_clamp, GL_EXT_texture_object, 
    GL_EXT_texture_rectangle, GL_EXT_texture_sRGB, GL_EXT_texture_sRGB_decode, 
    GL_EXT_texture_shared_exponent, GL_EXT_texture_snorm, 
    GL_EXT_texture_swizzle, GL_EXT_timer_query, GL_EXT_transform_feedback, 
    GL_EXT_vertex_array, GL_EXT_vertex_array_bgra, 
    GL_IBM_multimode_draw_arrays, GL_IBM_rasterpos_clip, 
    GL_IBM_texture_mirrored_repeat, GL_INGR_blend_func_separate, 
    GL_MESA_pack_invert, GL_MESA_texture_array, GL_MESA_texture_signed_rgba, 
    GL_MESA_window_pos, GL_MESA_ycbcr_texture, GL_NV_blend_square, 
    GL_NV_conditional_render, GL_NV_fog_distance, GL_NV_light_max_exponent, 
    GL_NV_packed_depth_stencil, GL_NV_primitive_restart, 
    GL_NV_texgen_reflection, GL_NV_texture_env_combine4, 
    GL_NV_texture_rectangle, GL_OES_EGL_image, GL_OES_read_format, 
    GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp, 
    GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SUN_multi_draw_arrays

12 GLX Visuals
    visual  x   bf lv rg d st  colorbuffer  sr ax dp st accumbuffer  ms  cav
  id dep cl sp  sz l  ci b ro  r  g  b  a F gb bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------------
0x020 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x021 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x08c 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None
0x08d 24 tc  0  32  0 r  . .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None
0x08e 24 tc  0  32  0 r  . .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x08f 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8 16 16 16 16  0 0 Slow
0x094 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None
0x095 24 dc  0  32  0 r  . .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None
0x096 24 dc  0  32  0 r  . .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x097 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x098 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8 16 16 16 16  0 0 Slow
0x05f 32 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None

28 GLXFBConfigs:
    visual  x   bf lv rg d st  colorbuffer  sr ax dp st accumbuffer  ms  cav
  id dep cl sp  sz l  ci b ro  r  g  b  a F gb bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------------
0x060  0 tc  0  16  0 r  y .   5  6  5  0 .  .  0  0  0  0  0  0  0  0 0 None
0x061  0 tc  0  16  0 r  . .   5  6  5  0 .  .  0  0  0  0  0  0  0  0 0 None
0x062  0 tc  0  16  0 r  y .   5  6  5  0 .  .  0 16  0  0  0  0  0  0 0 None
0x063  0 tc  0  16  0 r  . .   5  6  5  0 .  .  0 16  0  0  0  0  0  0 0 None
0x064  0 tc  0  16  0 r  y .   5  6  5  0 .  .  0 24  8  0  0  0  0  0 0 None
0x065  0 tc  0  16  0 r  . .   5  6  5  0 .  .  0 24  8  0  0  0  0  0 0 None
0x066 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None
0x067 24 tc  0  32  0 r  . .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None
0x068 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x069 24 tc  0  32  0 r  . .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x06a  0 tc  0  16  0 r  y .   5  6  5  0 .  .  0 16  0  0  0  0  0  0 0 None
0x06b  0 tc  0  16  0 r  y .   5  6  5  0 .  .  0 16  0 16 16 16  0  0 0 Slow
0x06c 32 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x06d 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8 16 16 16 16  0 0 Slow
0x076  0 dc  0  16  0 r  y .   5  6  5  0 .  .  0  0  0  0  0  0  0  0 0 None
0x077  0 dc  0  16  0 r  . .   5  6  5  0 .  .  0  0  0  0  0  0  0  0 0 None
0x078  0 dc  0  16  0 r  y .   5  6  5  0 .  .  0 16  0  0  0  0  0  0 0 None
0x079  0 dc  0  16  0 r  . .   5  6  5  0 .  .  0 16  0  0  0  0  0  0 0 None
0x07a  0 dc  0  16  0 r  y .   5  6  5  0 .  .  0 24  8  0  0  0  0  0 0 None
0x07b  0 dc  0  16  0 r  . .   5  6  5  0 .  .  0 24  8  0  0  0  0  0 0 None
0x07c 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None
0x07d 24 dc  0  32  0 r  . .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None
0x07e 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x07f 24 dc  0  32  0 r  . .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x080  0 dc  0  16  0 r  y .   5  6  5  0 .  .  0 16  0  0  0  0  0  0 0 None
0x081  0 dc  0  16  0 r  y .   5  6  5  0 .  .  0 16  0 16 16 16  0  0 0 Slow
0x082 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x083 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8 16 16 16 16  0 0 Slow
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 5 times in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Top
Aqualize

Re: Cinnamon going to software rendering for some users

Post by Aqualize »

/var/log/Xorg.0.log copied directly after login.

Fresh boot - logging in with a domain account (that is: getting software rendering)

Code: Select all

[    34.582] 
X.Org X Server 1.14.3
Release Date: 2013-09-12
[    34.582] X Protocol Version 11, Revision 0
[    34.582] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu
[    34.582] Current Operating System: Linux mariap-l3 3.11.0-15-generic #25-Ubuntu SMP Thu Jan 30 17:22:01 UTC 2014 x86_64
[    34.582] Kernel command line: BOOT_IMAGE=/vmlinuz-3.11.0-15-generic root=/dev/mapper/mint--vg-root ro quiet splash vt.handoff=7
[    34.582] Build Date: 15 October 2013  09:23:37AM
[    34.582] xorg-server 2:1.14.3-3ubuntu2 (For technical support please see http://www.ubuntu.com/support) 
[    34.582] Current version of pixman: 0.30.2
[    34.582] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    34.582] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    34.582] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb 18 14:56:30 2014
[    34.583] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    34.584] (==) No Layout section.  Using the first Screen section.
[    34.584] (==) No screen section available. Using defaults.
[    34.584] (**) |-->Screen "Default Screen Section" (0)
[    34.584] (**) |   |-->Monitor "<default monitor>"
[    34.585] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    34.585] (==) Automatically adding devices
[    34.585] (==) Automatically enabling devices
[    34.585] (==) Automatically adding GPU devices
[    34.587] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    34.587] 	Entry deleted from font path.
[    34.587] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    34.587] 	Entry deleted from font path.
[    34.587] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    34.587] 	Entry deleted from font path.
[    34.587] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    34.587] 	Entry deleted from font path.
[    34.587] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    34.587] 	Entry deleted from font path.
[    34.588] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    34.588] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    34.588] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    34.588] (II) Loader magic: 0x7f011505fd20
[    34.588] (II) Module ABI versions:
[    34.588] 	X.Org ANSI C Emulation: 0.4
[    34.588] 	X.Org Video Driver: 14.1
[    34.588] 	X.Org XInput driver : 19.1
[    34.588] 	X.Org Server Extension : 7.0
[    34.588] (II) xfree86: Adding drm device (/dev/dri/card0)
[    34.588] (--) PCI:*(0:0:2:0) 8086:0a16:1028:05cb rev 11, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
[    34.588] (II) Open ACPI successful (/var/run/acpid.socket)
[    34.589] Initializing built-in extension Generic Event Extension
[    34.589] Initializing built-in extension SHAPE
[    34.589] Initializing built-in extension MIT-SHM
[    34.589] Initializing built-in extension XInputExtension
[    34.589] Initializing built-in extension XTEST
[    34.589] Initializing built-in extension BIG-REQUESTS
[    34.589] Initializing built-in extension SYNC
[    34.589] Initializing built-in extension XKEYBOARD
[    34.589] Initializing built-in extension XC-MISC
[    34.589] Initializing built-in extension SECURITY
[    34.589] Initializing built-in extension XINERAMA
[    34.589] Initializing built-in extension XFIXES
[    34.589] Initializing built-in extension RENDER
[    34.589] Initializing built-in extension RANDR
[    34.589] Initializing built-in extension COMPOSITE
[    34.589] Initializing built-in extension DAMAGE
[    34.589] Initializing built-in extension MIT-SCREEN-SAVER
[    34.589] Initializing built-in extension DOUBLE-BUFFER
[    34.589] Initializing built-in extension RECORD
[    34.589] Initializing built-in extension DPMS
[    34.589] Initializing built-in extension X-Resource
[    34.589] Initializing built-in extension XVideo
[    34.589] Initializing built-in extension XVideo-MotionCompensation
[    34.589] Initializing built-in extension SELinux
[    34.589] Initializing built-in extension XFree86-VidModeExtension
[    34.589] Initializing built-in extension XFree86-DGA
[    34.589] Initializing built-in extension XFree86-DRI
[    34.589] Initializing built-in extension DRI2
[    34.589] (II) "glx" will be loaded by default.
[    34.589] (WW) "xmir" is not to be loaded by default. Skipping.
[    34.589] (II) LoadModule: "dri2"
[    34.589] (II) Module "dri2" already built-in
[    34.589] (II) LoadModule: "glamoregl"
[    34.590] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    34.600] (II) Module glamoregl: vendor="X.Org Foundation"
[    34.600] 	compiled for 1.14.2.901, module version = 0.5.1
[    34.600] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    34.600] (II) LoadModule: "glx"
[    34.600] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    34.602] (II) Module glx: vendor="X.Org Foundation"
[    34.602] 	compiled for 1.14.3, module version = 1.0.0
[    34.602] 	ABI class: X.Org Server Extension, version 7.0
[    34.602] (==) AIGLX enabled
[    34.602] Loading extension GLX
[    34.602] (==) Matched intel as autoconfigured driver 0
[    34.602] (==) Matched intel as autoconfigured driver 1
[    34.602] (==) Matched vesa as autoconfigured driver 2
[    34.602] (==) Matched modesetting as autoconfigured driver 3
[    34.602] (==) Matched fbdev as autoconfigured driver 4
[    34.602] (==) Assigned the driver to the xf86ConfigLayout
[    34.602] (II) LoadModule: "intel"
[    34.602] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    34.605] (II) Module intel: vendor="X.Org Foundation"
[    34.605] 	compiled for 1.14.3, module version = 2.99.904
[    34.605] 	Module class: X.Org Video Driver
[    34.605] 	ABI class: X.Org Video Driver, version 14.1
[    34.605] (II) LoadModule: "vesa"
[    34.606] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    34.606] (II) Module vesa: vendor="X.Org Foundation"
[    34.606] 	compiled for 1.14.1, module version = 2.3.2
[    34.606] 	Module class: X.Org Video Driver
[    34.606] 	ABI class: X.Org Video Driver, version 14.1
[    34.606] (II) LoadModule: "modesetting"
[    34.607] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    34.607] (II) Module modesetting: vendor="X.Org Foundation"
[    34.607] 	compiled for 1.14.1, module version = 0.8.0
[    34.607] 	Module class: X.Org Video Driver
[    34.607] 	ABI class: X.Org Video Driver, version 14.1
[    34.607] (II) LoadModule: "fbdev"
[    34.607] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    34.608] (II) Module fbdev: vendor="X.Org Foundation"
[    34.608] 	compiled for 1.14.1, module version = 0.4.3
[    34.608] 	Module class: X.Org Video Driver
[    34.608] 	ABI class: X.Org Video Driver, version 14.1
[    34.608] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
	HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
	HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
	HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
	HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[    34.608] (II) VESA: driver for VESA chipsets: vesa
[    34.608] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    34.608] (II) FBDEV: driver for framebuffer: fbdev
[    34.608] (++) using VT number 8

[    34.613] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.904-0ubuntu2 (Timo Aaltonen <tjaalton@ubuntu.com>)
[    34.614] (WW) Falling back to old probe method for vesa
[    34.614] (WW) Falling back to old probe method for modesetting
[    34.614] (WW) Falling back to old probe method for fbdev
[    34.614] (II) Loading sub module "fbdevhw"
[    34.614] (II) LoadModule: "fbdevhw"
[    34.614] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    34.614] (II) Module fbdevhw: vendor="X.Org Foundation"
[    34.614] 	compiled for 1.14.3, module version = 0.0.2
[    34.614] 	ABI class: X.Org Video Driver, version 14.1
[    34.615] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    34.615] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    34.615] (==) intel(0): RGB weight 888
[    34.615] (==) intel(0): Default visual is TrueColor
[    34.615] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4400
[    34.615] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2
[    34.615] (**) intel(0): Framebuffer tiled
[    34.615] (**) intel(0): Pixmaps tiled
[    34.615] (**) intel(0): "Tear free" disabled
[    34.615] (**) intel(0): Forcing per-crtc-pixmaps? no
[    34.615] (II) intel(0): Output eDP1 has no monitor section
[    34.615] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[    34.615] (II) intel(0): Output DP1 has no monitor section
[    34.615] (II) intel(0): Output HDMI1 has no monitor section
[    34.615] (II) intel(0): Output DP2 has no monitor section
[    34.615] (II) intel(0): Output HDMI2 has no monitor section
[    34.615] (II) intel(0): Output VIRTUAL1 has no monitor section
[    34.615] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[    34.615] (==) intel(0): DPI set to (96, 96)
[    34.615] (II) Loading sub module "dri2"
[    34.615] (II) LoadModule: "dri2"
[    34.615] (II) Module "dri2" already built-in
[    34.618] (II) UnloadModule: "vesa"
[    34.618] (II) Unloading vesa
[    34.619] (II) UnloadModule: "modesetting"
[    34.619] (II) Unloading modesetting
[    34.619] (II) UnloadModule: "fbdev"
[    34.619] (II) Unloading fbdev
[    34.619] (II) UnloadSubModule: "fbdevhw"
[    34.619] (II) Unloading fbdevhw
[    34.619] (==) Depth 24 pixmap format is 32 bpp
[    34.621] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[    34.621] (==) intel(0): Backing store disabled
[    34.621] (==) intel(0): Silken mouse enabled
[    34.621] (II) intel(0): HW Cursor enabled
[    34.621] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    34.622] (==) intel(0): DPMS enabled
[    34.622] (II) intel(0): [DRI2] Setup complete
[    34.622] (II) intel(0): [DRI2]   DRI driver: i965
[    34.622] (II) intel(0): direct rendering: DRI2 Enabled
[    34.622] (==) intel(0): hotplug detection: "enabled"
[    34.622] (--) RandR disabled
[    34.626] (II) SELinux: Disabled on system
[    34.645] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    34.645] (II) AIGLX: enabled GLX_INTEL_swap_event
[    34.645] (II) AIGLX: enabled GLX_ARB_create_context
[    34.645] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    34.645] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    34.645] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    34.645] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    34.645] (II) AIGLX: Loaded and initialized i965
[    34.645] (II) GLX: Initialized DRI2 GL provider for screen 0
[    34.647] (II) intel(0): switch to mode 1920x1080@60.0 on pipe 0 using eDP1, position (0, 0), rotation normal
[    34.796] (II) intel(0): Setting screen physical size to 508 x 285
[    34.802] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    34.804] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    34.804] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    34.804] (II) LoadModule: "evdev"
[    34.804] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    34.805] (II) Module evdev: vendor="X.Org Foundation"
[    34.805] 	compiled for 1.14.1, module version = 2.7.3
[    34.805] 	Module class: X.Org XInput Driver
[    34.805] 	ABI class: X.Org XInput driver, version 19.1
[    34.805] (II) Using input driver 'evdev' for 'Power Button'
[    34.805] (**) Power Button: always reports core events
[    34.805] (**) evdev: Power Button: Device: "/dev/input/event3"
[    34.805] (--) evdev: Power Button: Vendor 0 Product 0x1
[    34.805] (--) evdev: Power Button: Found keys
[    34.805] (II) evdev: Power Button: Configuring as keyboard
[    34.805] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    34.805] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    34.805] (**) Option "xkb_rules" "evdev"
[    34.805] (**) Option "xkb_model" "pc105"
[    34.805] (**) Option "xkb_layout" "se"
[    34.807] (II) XKB: reuse xkmfile /var/lib/xkb/server-523B07B557B20588EB459118C97940B7C9FF61EB.xkm
[    34.807] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    34.807] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    34.807] (II) Using input driver 'evdev' for 'Video Bus'
[    34.807] (**) Video Bus: always reports core events
[    34.807] (**) evdev: Video Bus: Device: "/dev/input/event5"
[    34.808] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    34.808] (--) evdev: Video Bus: Found keys
[    34.808] (II) evdev: Video Bus: Configuring as keyboard
[    34.808] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5/event5"
[    34.808] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    34.808] (**) Option "xkb_rules" "evdev"
[    34.808] (**) Option "xkb_model" "pc105"
[    34.808] (**) Option "xkb_layout" "se"
[    34.808] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    34.808] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    34.808] (II) Using input driver 'evdev' for 'Power Button'
[    34.808] (**) Power Button: always reports core events
[    34.808] (**) evdev: Power Button: Device: "/dev/input/event1"
[    34.808] (--) evdev: Power Button: Vendor 0 Product 0x1
[    34.808] (--) evdev: Power Button: Found keys
[    34.808] (II) evdev: Power Button: Configuring as keyboard
[    34.808] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[    34.808] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    34.808] (**) Option "xkb_rules" "evdev"
[    34.808] (**) Option "xkb_model" "pc105"
[    34.808] (**) Option "xkb_layout" "se"
[    34.808] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    34.808] (II) No input driver specified, ignoring this device.
[    34.808] (II) This device may have been added with another device file.
[    34.808] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    34.808] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    34.808] (II) Using input driver 'evdev' for 'Sleep Button'
[    34.808] (**) Sleep Button: always reports core events
[    34.808] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[    34.808] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    34.808] (--) evdev: Sleep Button: Found keys
[    34.808] (II) evdev: Sleep Button: Configuring as keyboard
[    34.808] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[    34.808] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    34.808] (**) Option "xkb_rules" "evdev"
[    34.808] (**) Option "xkb_model" "pc105"
[    34.808] (**) Option "xkb_layout" "se"
[    34.808] (II) config/udev: Adding drm device (/dev/dri/card0)
[    34.808] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[    34.809] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=8 (/dev/input/event6)
[    34.809] (II) No input driver specified, ignoring this device.
[    34.809] (II) This device may have been added with another device file.
[    34.809] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=7 (/dev/input/event7)
[    34.809] (II) No input driver specified, ignoring this device.
[    34.809] (II) This device may have been added with another device file.
[    34.809] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=3 (/dev/input/event8)
[    34.809] (II) No input driver specified, ignoring this device.
[    34.809] (II) This device may have been added with another device file.
[    34.809] (II) config/udev: Adding input device Laptop_Integrated_Webcam_HD (/dev/input/event12)
[    34.809] (**) Laptop_Integrated_Webcam_HD: Applying InputClass "evdev keyboard catchall"
[    34.809] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_HD'
[    34.809] (**) Laptop_Integrated_Webcam_HD: always reports core events
[    34.809] (**) evdev: Laptop_Integrated_Webcam_HD: Device: "/dev/input/event12"
[    34.809] (--) evdev: Laptop_Integrated_Webcam_HD: Vendor 0xc45 Product 0x64d2
[    34.809] (--) evdev: Laptop_Integrated_Webcam_HD: Found keys
[    34.809] (II) evdev: Laptop_Integrated_Webcam_HD: Configuring as keyboard
[    34.809] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.0/input/input12/event12"
[    34.809] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_HD" (type: KEYBOARD, id 10)
[    34.809] (**) Option "xkb_rules" "evdev"
[    34.809] (**) Option "xkb_model" "pc105"
[    34.809] (**) Option "xkb_layout" "se"
[    34.809] (II) config/udev: Adding input device HDA Intel PCH Dock Line Out (/dev/input/event10)
[    34.809] (II) No input driver specified, ignoring this device.
[    34.809] (II) This device may have been added with another device file.
[    34.809] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event11)
[    34.809] (II) No input driver specified, ignoring this device.
[    34.809] (II) This device may have been added with another device file.
[    34.809] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event9)
[    34.809] (II) No input driver specified, ignoring this device.
[    34.809] (II) This device may have been added with another device file.
[    34.810] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[    34.810] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    34.810] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    34.810] (**) AT Translated Set 2 keyboard: always reports core events
[    34.810] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[    34.810] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    34.810] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    34.810] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    34.810] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[    34.810] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[    34.810] (**) Option "xkb_rules" "evdev"
[    34.810] (**) Option "xkb_model" "pc105"
[    34.810] (**) Option "xkb_layout" "se"
[    34.811] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event13)
[    34.811] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    34.811] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[    34.811] (**) Dell WMI hotkeys: always reports core events
[    34.811] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event13"
[    34.811] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[    34.811] (--) evdev: Dell WMI hotkeys: Found keys
[    34.811] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[    34.811] (**) Option "config_info" "udev:/sys/devices/virtual/input/input13/event13"
[    34.811] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 12)
[    34.811] (**) Option "xkb_rules" "evdev"
[    34.811] (**) Option "xkb_model" "pc105"
[    34.811] (**) Option "xkb_layout" "se"
[    34.851] (II) config/udev: Adding input device DualPoint Stick (/dev/input/mouse0)
[    34.851] (II) No input driver specified, ignoring this device.
[    34.851] (II) This device may have been added with another device file.
[    34.852] (II) config/udev: Adding input device DualPoint Stick (/dev/input/event14)
[    34.852] (**) DualPoint Stick: Applying InputClass "evdev pointer catchall"
[    34.852] (**) DualPoint Stick: Applying InputClass "trackpoint catchall"
[    34.852] (II) Using input driver 'evdev' for 'DualPoint Stick'
[    34.852] (**) DualPoint Stick: always reports core events
[    34.852] (**) evdev: DualPoint Stick: Device: "/dev/input/event14"
[    34.852] (--) evdev: DualPoint Stick: Vendor 0x2 Product 0x8
[    34.852] (--) evdev: DualPoint Stick: Found 3 mouse buttons
[    34.852] (--) evdev: DualPoint Stick: Found relative axes
[    34.852] (--) evdev: DualPoint Stick: Found x and y relative axes
[    34.852] (II) evdev: DualPoint Stick: Configuring as mouse
[    34.852] (**) Option "Emulate3Buttons" "true"
[    34.852] (**) Option "EmulateWheel" "true"
[    34.852] (**) Option "EmulateWheelButton" "2"
[    34.852] (**) Option "YAxisMapping" "4 5"
[    34.852] (**) evdev: DualPoint Stick: YAxisMapping: buttons 4 and 5
[    34.852] (**) Option "XAxisMapping" "6 7"
[    34.852] (**) evdev: DualPoint Stick: XAxisMapping: buttons 6 and 7
[    34.852] (**) evdev: DualPoint Stick: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    34.852] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input14/event14"
[    34.852] (II) XINPUT: Adding extended input device "DualPoint Stick" (type: MOUSE, id 13)
[    34.852] (II) evdev: DualPoint Stick: initialized for relative axes.
[    34.852] (**) DualPoint Stick: (accel) keeping acceleration scheme 1
[    34.852] (**) DualPoint Stick: (accel) acceleration profile 0
[    34.852] (**) DualPoint Stick: (accel) acceleration factor: 2.000
[    34.852] (**) DualPoint Stick: (accel) acceleration threshold: 4
[    34.864] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/mouse1)
[    34.864] (**) AlpsPS/2 ALPS DualPoint TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    34.864] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/event15)
[    34.864] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "evdev touchpad catchall"
[    34.864] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "touchpad catchall"
[    34.865] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "Default clickpad buttons"
[    34.865] (II) LoadModule: "synaptics"
[    34.865] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    34.865] (II) Module synaptics: vendor="X.Org Foundation"
[    34.865] 	compiled for 1.14.2, module version = 1.7.1
[    34.865] 	Module class: X.Org XInput Driver
[    34.865] 	ABI class: X.Org XInput driver, version 19.1
[    34.865] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS DualPoint TouchPad'
[    34.865] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[    34.865] (**) Option "Device" "/dev/input/event15"
[    34.904] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: ignoring touch events for semi-multitouch device
[    34.904] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: x-axis range 0 - 2000 (res 0)
[    34.904] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: y-axis range 0 - 1400 (res 0)
[    34.904] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: pressure range 0 - 127
[    34.904] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: device does not report finger width.
[    34.904] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: buttons: left right middle double triple
[    34.904] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: Vendor 0x2 Product 0x8
[    34.904] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: invalid finger width range.  defaulting to 0 - 15
[    34.904] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[    34.904] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[    34.920] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input15/event15"
[    34.920] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD, id 14)
[    34.920] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    34.920] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) MaxSpeed is now 1.75
[    34.920] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) AccelFactor is now 0.082
[    34.920] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) keeping acceleration scheme 1
[    34.920] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration profile 1
[    34.920] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration factor: 2.000
[    34.920] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration threshold: 4
[    34.920] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[    53.839] (II) XKB: reuse xkmfile /var/lib/xkb/server-B345A6290A90F686BA69FEF01421689CFC38762D.xkm
[    53.995] (II) intel(0): EDID vendor "AUO", prod id 4413
[    53.995] (II) intel(0): Printing DDC gathered Modelines:
[    53.995] (II) intel(0): Modeline "1920x1080"x0.0  141.00  1920 1936 1952 2104  1080 1083 1097 1116 +hsync -vsync (67.0 kHz eP)
[    54.147] (II) intel(0): EDID vendor "AUO", prod id 4413
[    54.147] (II) intel(0): Printing DDC gathered Modelines:
[    54.147] (II) intel(0): Modeline "1920x1080"x0.0  141.00  1920 1936 1952 2104  1080 1083 1097 1116 +hsync -vsync (67.0 kHz eP)
[    54.310] (II) intel(0): EDID vendor "AUO", prod id 4413
[    54.310] (II) intel(0): Printing DDC gathered Modelines:
[    54.310] (II) intel(0): Modeline "1920x1080"x0.0  141.00  1920 1936 1952 2104  1080 1083 1097 1116 +hsync -vsync (67.0 kHz eP)
[    54.438] (II) XKB: reuse xkmfile /var/lib/xkb/server-B345A6290A90F686BA69FEF01421689CFC38762D.xkm
[    54.457] (II) XKB: reuse xkmfile /var/lib/xkb/server-8350A4A3711CA0DBCB29548C87C0D195B5B0EF60.xkm
[    55.346] (II) XKB: reuse xkmfile /var/lib/xkb/server-F460746FB28D90B40B7E9BAA4CF91B25B7DF17E9.xkm
[    55.350] (II) XKB: reuse xkmfile /var/lib/xkb/server-F460746FB28D90B40B7E9BAA4CF91B25B7DF17E9.xkm
[    55.353] (II) XKB: reuse xkmfile /var/lib/xkb/server-F460746FB28D90B40B7E9BAA4CF91B25B7DF17E9.xkm
[    55.356] (II) XKB: reuse xkmfile /var/lib/xkb/server-F460746FB28D90B40B7E9BAA4CF91B25B7DF17E9.xkm
[    55.359] (II) XKB: reuse xkmfile /var/lib/xkb/server-F460746FB28D90B40B7E9BAA4CF91B25B7DF17E9.xkm
[    55.362] (II) XKB: reuse xkmfile /var/lib/xkb/server-F460746FB28D90B40B7E9BAA4CF91B25B7DF17E9.xkm
[    55.365] (II) XKB: reuse xkmfile /var/lib/xkb/server-F460746FB28D90B40B7E9BAA4CF91B25B7DF17E9.xkm
[    55.368] (II) XKB: reuse xkmfile /var/lib/xkb/server-F460746FB28D90B40B7E9BAA4CF91B25B7DF17E9.xkm
[    55.371] (II) XKB: reuse xkmfile /var/lib/xkb/server-F460746FB28D90B40B7E9BAA4CF91B25B7DF17E9.xkm
[    75.212] (II) intel(0): EDID vendor "AUO", prod id 4413
[    75.212] (II) intel(0): Printing DDC gathered Modelines:
[    75.212] (II) intel(0): Modeline "1920x1080"x0.0  141.00  1920 1936 1952 2104  1080 1083 1097 1116 +hsync -vsync (67.0 kHz eP)
Fresh boot - logging in with a local account (that is: no problems)

Code: Select all

[    13.709] 
X.Org X Server 1.14.3
Release Date: 2013-09-12
[    13.709] X Protocol Version 11, Revision 0
[    13.709] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu
[    13.709] Current Operating System: Linux mariap-l3 3.11.0-15-generic #25-Ubuntu SMP Thu Jan 30 17:22:01 UTC 2014 x86_64
[    13.709] Kernel command line: BOOT_IMAGE=/vmlinuz-3.11.0-15-generic root=/dev/mapper/mint--vg-root ro quiet splash vt.handoff=7
[    13.709] Build Date: 15 October 2013  09:23:37AM
[    13.709] xorg-server 2:1.14.3-3ubuntu2 (For technical support please see http://www.ubuntu.com/support) 
[    13.709] Current version of pixman: 0.30.2
[    13.709] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    13.709] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    13.709] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb 18 15:03:38 2014
[    13.710] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    13.710] (==) No Layout section.  Using the first Screen section.
[    13.710] (==) No screen section available. Using defaults.
[    13.710] (**) |-->Screen "Default Screen Section" (0)
[    13.710] (**) |   |-->Monitor "<default monitor>"
[    13.710] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    13.710] (==) Automatically adding devices
[    13.710] (==) Automatically enabling devices
[    13.710] (==) Automatically adding GPU devices
[    13.710] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    13.710] 	Entry deleted from font path.
[    13.710] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    13.710] 	Entry deleted from font path.
[    13.710] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    13.710] 	Entry deleted from font path.
[    13.710] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    13.710] 	Entry deleted from font path.
[    13.710] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    13.710] 	Entry deleted from font path.
[    13.710] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    13.710] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    13.710] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    13.710] (II) Loader magic: 0x7f16cec67d20
[    13.710] (II) Module ABI versions:
[    13.710] 	X.Org ANSI C Emulation: 0.4
[    13.710] 	X.Org Video Driver: 14.1
[    13.710] 	X.Org XInput driver : 19.1
[    13.710] 	X.Org Server Extension : 7.0
[    13.710] (II) xfree86: Adding drm device (/dev/dri/card0)
[    13.711] (--) PCI:*(0:0:2:0) 8086:0a16:1028:05cb rev 11, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
[    13.711] (II) Open ACPI successful (/var/run/acpid.socket)
[    13.711] Initializing built-in extension Generic Event Extension
[    13.711] Initializing built-in extension SHAPE
[    13.711] Initializing built-in extension MIT-SHM
[    13.711] Initializing built-in extension XInputExtension
[    13.711] Initializing built-in extension XTEST
[    13.711] Initializing built-in extension BIG-REQUESTS
[    13.711] Initializing built-in extension SYNC
[    13.711] Initializing built-in extension XKEYBOARD
[    13.711] Initializing built-in extension XC-MISC
[    13.711] Initializing built-in extension SECURITY
[    13.711] Initializing built-in extension XINERAMA
[    13.711] Initializing built-in extension XFIXES
[    13.711] Initializing built-in extension RENDER
[    13.711] Initializing built-in extension RANDR
[    13.711] Initializing built-in extension COMPOSITE
[    13.711] Initializing built-in extension DAMAGE
[    13.711] Initializing built-in extension MIT-SCREEN-SAVER
[    13.711] Initializing built-in extension DOUBLE-BUFFER
[    13.711] Initializing built-in extension RECORD
[    13.711] Initializing built-in extension DPMS
[    13.711] Initializing built-in extension X-Resource
[    13.711] Initializing built-in extension XVideo
[    13.711] Initializing built-in extension XVideo-MotionCompensation
[    13.711] Initializing built-in extension SELinux
[    13.711] Initializing built-in extension XFree86-VidModeExtension
[    13.711] Initializing built-in extension XFree86-DGA
[    13.711] Initializing built-in extension XFree86-DRI
[    13.711] Initializing built-in extension DRI2
[    13.711] (II) "glx" will be loaded by default.
[    13.711] (WW) "xmir" is not to be loaded by default. Skipping.
[    13.711] (II) LoadModule: "dri2"
[    13.711] (II) Module "dri2" already built-in
[    13.711] (II) LoadModule: "glamoregl"
[    13.712] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    13.721] (II) Module glamoregl: vendor="X.Org Foundation"
[    13.721] 	compiled for 1.14.2.901, module version = 0.5.1
[    13.721] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    13.721] (II) LoadModule: "glx"
[    13.721] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    13.721] (II) Module glx: vendor="X.Org Foundation"
[    13.721] 	compiled for 1.14.3, module version = 1.0.0
[    13.721] 	ABI class: X.Org Server Extension, version 7.0
[    13.721] (==) AIGLX enabled
[    13.721] Loading extension GLX
[    13.721] (==) Matched intel as autoconfigured driver 0
[    13.721] (==) Matched intel as autoconfigured driver 1
[    13.721] (==) Matched vesa as autoconfigured driver 2
[    13.721] (==) Matched modesetting as autoconfigured driver 3
[    13.721] (==) Matched fbdev as autoconfigured driver 4
[    13.721] (==) Assigned the driver to the xf86ConfigLayout
[    13.721] (II) LoadModule: "intel"
[    13.722] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    13.722] (II) Module intel: vendor="X.Org Foundation"
[    13.722] 	compiled for 1.14.3, module version = 2.99.904
[    13.722] 	Module class: X.Org Video Driver
[    13.722] 	ABI class: X.Org Video Driver, version 14.1
[    13.722] (II) LoadModule: "vesa"
[    13.723] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    13.723] (II) Module vesa: vendor="X.Org Foundation"
[    13.723] 	compiled for 1.14.1, module version = 2.3.2
[    13.723] 	Module class: X.Org Video Driver
[    13.723] 	ABI class: X.Org Video Driver, version 14.1
[    13.723] (II) LoadModule: "modesetting"
[    13.723] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    13.723] (II) Module modesetting: vendor="X.Org Foundation"
[    13.723] 	compiled for 1.14.1, module version = 0.8.0
[    13.723] 	Module class: X.Org Video Driver
[    13.723] 	ABI class: X.Org Video Driver, version 14.1
[    13.723] (II) LoadModule: "fbdev"
[    13.723] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    13.723] (II) Module fbdev: vendor="X.Org Foundation"
[    13.723] 	compiled for 1.14.1, module version = 0.4.3
[    13.723] 	Module class: X.Org Video Driver
[    13.723] 	ABI class: X.Org Video Driver, version 14.1
[    13.723] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
	HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
	HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
	HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
	HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[    13.723] (II) VESA: driver for VESA chipsets: vesa
[    13.723] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    13.723] (II) FBDEV: driver for framebuffer: fbdev
[    13.723] (++) using VT number 8

[    13.727] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.904-0ubuntu2 (Timo Aaltonen <tjaalton@ubuntu.com>)
[    13.727] (WW) Falling back to old probe method for vesa
[    13.727] (WW) Falling back to old probe method for modesetting
[    13.727] (WW) Falling back to old probe method for fbdev
[    13.727] (II) Loading sub module "fbdevhw"
[    13.727] (II) LoadModule: "fbdevhw"
[    13.727] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    13.727] (II) Module fbdevhw: vendor="X.Org Foundation"
[    13.727] 	compiled for 1.14.3, module version = 0.0.2
[    13.727] 	ABI class: X.Org Video Driver, version 14.1
[    13.727] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    13.727] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    13.727] (==) intel(0): RGB weight 888
[    13.727] (==) intel(0): Default visual is TrueColor
[    13.727] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4400
[    13.728] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2
[    13.728] (**) intel(0): Framebuffer tiled
[    13.728] (**) intel(0): Pixmaps tiled
[    13.728] (**) intel(0): "Tear free" disabled
[    13.728] (**) intel(0): Forcing per-crtc-pixmaps? no
[    13.728] (II) intel(0): Output eDP1 has no monitor section
[    13.728] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[    13.728] (II) intel(0): Output DP1 has no monitor section
[    13.728] (II) intel(0): Output HDMI1 has no monitor section
[    13.728] (II) intel(0): Output DP2 has no monitor section
[    13.728] (II) intel(0): Output HDMI2 has no monitor section
[    13.728] (II) intel(0): Output VIRTUAL1 has no monitor section
[    13.728] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[    13.728] (==) intel(0): DPI set to (96, 96)
[    13.728] (II) Loading sub module "dri2"
[    13.728] (II) LoadModule: "dri2"
[    13.728] (II) Module "dri2" already built-in
[    13.731] (II) UnloadModule: "vesa"
[    13.731] (II) Unloading vesa
[    13.731] (II) UnloadModule: "modesetting"
[    13.731] (II) Unloading modesetting
[    13.732] (II) UnloadModule: "fbdev"
[    13.732] (II) Unloading fbdev
[    13.732] (II) UnloadSubModule: "fbdevhw"
[    13.732] (II) Unloading fbdevhw
[    13.732] (==) Depth 24 pixmap format is 32 bpp
[    13.732] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[    13.732] (==) intel(0): Backing store disabled
[    13.732] (==) intel(0): Silken mouse enabled
[    13.732] (II) intel(0): HW Cursor enabled
[    13.732] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    13.732] (==) intel(0): DPMS enabled
[    13.732] (II) intel(0): [DRI2] Setup complete
[    13.732] (II) intel(0): [DRI2]   DRI driver: i965
[    13.732] (II) intel(0): direct rendering: DRI2 Enabled
[    13.732] (==) intel(0): hotplug detection: "enabled"
[    13.732] (--) RandR disabled
[    13.736] (II) SELinux: Disabled on system
[    13.752] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    13.752] (II) AIGLX: enabled GLX_INTEL_swap_event
[    13.752] (II) AIGLX: enabled GLX_ARB_create_context
[    13.752] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    13.752] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    13.752] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    13.752] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    13.752] (II) AIGLX: Loaded and initialized i965
[    13.752] (II) GLX: Initialized DRI2 GL provider for screen 0
[    13.754] (II) intel(0): switch to mode 1920x1080@60.0 on pipe 0 using eDP1, position (0, 0), rotation normal
[    13.900] (II) intel(0): Setting screen physical size to 508 x 285
[    13.905] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    13.906] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    13.906] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    13.906] (II) LoadModule: "evdev"
[    13.906] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    13.907] (II) Module evdev: vendor="X.Org Foundation"
[    13.907] 	compiled for 1.14.1, module version = 2.7.3
[    13.907] 	Module class: X.Org XInput Driver
[    13.907] 	ABI class: X.Org XInput driver, version 19.1
[    13.907] (II) Using input driver 'evdev' for 'Power Button'
[    13.907] (**) Power Button: always reports core events
[    13.907] (**) evdev: Power Button: Device: "/dev/input/event3"
[    13.907] (--) evdev: Power Button: Vendor 0 Product 0x1
[    13.907] (--) evdev: Power Button: Found keys
[    13.907] (II) evdev: Power Button: Configuring as keyboard
[    13.907] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    13.907] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    13.907] (**) Option "xkb_rules" "evdev"
[    13.907] (**) Option "xkb_model" "pc105"
[    13.907] (**) Option "xkb_layout" "se"
[    13.909] (II) XKB: reuse xkmfile /var/lib/xkb/server-523B07B557B20588EB459118C97940B7C9FF61EB.xkm
[    13.910] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    13.910] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    13.910] (II) Using input driver 'evdev' for 'Video Bus'
[    13.910] (**) Video Bus: always reports core events
[    13.910] (**) evdev: Video Bus: Device: "/dev/input/event5"
[    13.910] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    13.910] (--) evdev: Video Bus: Found keys
[    13.910] (II) evdev: Video Bus: Configuring as keyboard
[    13.910] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5/event5"
[    13.910] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    13.910] (**) Option "xkb_rules" "evdev"
[    13.910] (**) Option "xkb_model" "pc105"
[    13.910] (**) Option "xkb_layout" "se"
[    13.910] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    13.910] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    13.910] (II) Using input driver 'evdev' for 'Power Button'
[    13.910] (**) Power Button: always reports core events
[    13.910] (**) evdev: Power Button: Device: "/dev/input/event1"
[    13.910] (--) evdev: Power Button: Vendor 0 Product 0x1
[    13.910] (--) evdev: Power Button: Found keys
[    13.910] (II) evdev: Power Button: Configuring as keyboard
[    13.910] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[    13.910] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    13.910] (**) Option "xkb_rules" "evdev"
[    13.910] (**) Option "xkb_model" "pc105"
[    13.910] (**) Option "xkb_layout" "se"
[    13.910] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    13.910] (II) No input driver specified, ignoring this device.
[    13.910] (II) This device may have been added with another device file.
[    13.911] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    13.911] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    13.911] (II) Using input driver 'evdev' for 'Sleep Button'
[    13.911] (**) Sleep Button: always reports core events
[    13.911] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[    13.911] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    13.911] (--) evdev: Sleep Button: Found keys
[    13.911] (II) evdev: Sleep Button: Configuring as keyboard
[    13.911] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[    13.911] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    13.911] (**) Option "xkb_rules" "evdev"
[    13.911] (**) Option "xkb_model" "pc105"
[    13.911] (**) Option "xkb_layout" "se"
[    13.911] (II) config/udev: Adding drm device (/dev/dri/card0)
[    13.911] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[    13.911] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=8 (/dev/input/event6)
[    13.911] (II) No input driver specified, ignoring this device.
[    13.911] (II) This device may have been added with another device file.
[    13.911] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=7 (/dev/input/event7)
[    13.911] (II) No input driver specified, ignoring this device.
[    13.911] (II) This device may have been added with another device file.
[    13.912] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=3 (/dev/input/event8)
[    13.912] (II) No input driver specified, ignoring this device.
[    13.912] (II) This device may have been added with another device file.
[    13.912] (II) config/udev: Adding input device Laptop_Integrated_Webcam_HD (/dev/input/event9)
[    13.912] (**) Laptop_Integrated_Webcam_HD: Applying InputClass "evdev keyboard catchall"
[    13.912] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_HD'
[    13.912] (**) Laptop_Integrated_Webcam_HD: always reports core events
[    13.912] (**) evdev: Laptop_Integrated_Webcam_HD: Device: "/dev/input/event9"
[    13.912] (--) evdev: Laptop_Integrated_Webcam_HD: Vendor 0xc45 Product 0x64d2
[    13.912] (--) evdev: Laptop_Integrated_Webcam_HD: Found keys
[    13.912] (II) evdev: Laptop_Integrated_Webcam_HD: Configuring as keyboard
[    13.912] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.0/input/input9/event9"
[    13.912] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_HD" (type: KEYBOARD, id 10)
[    13.912] (**) Option "xkb_rules" "evdev"
[    13.912] (**) Option "xkb_model" "pc105"
[    13.912] (**) Option "xkb_layout" "se"
[    13.912] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event10)
[    13.912] (II) No input driver specified, ignoring this device.
[    13.912] (II) This device may have been added with another device file.
[    13.912] (II) config/udev: Adding input device HDA Intel PCH Dock Line Out (/dev/input/event11)
[    13.912] (II) No input driver specified, ignoring this device.
[    13.912] (II) This device may have been added with another device file.
[    13.912] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event12)
[    13.912] (II) No input driver specified, ignoring this device.
[    13.912] (II) This device may have been added with another device file.
[    13.912] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[    13.912] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    13.912] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    13.912] (**) AT Translated Set 2 keyboard: always reports core events
[    13.912] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[    13.912] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    13.912] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    13.912] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    13.912] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[    13.912] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[    13.912] (**) Option "xkb_rules" "evdev"
[    13.912] (**) Option "xkb_model" "pc105"
[    13.912] (**) Option "xkb_layout" "se"
[    13.913] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event13)
[    13.913] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    13.913] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[    13.913] (**) Dell WMI hotkeys: always reports core events
[    13.913] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event13"
[    13.913] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[    13.913] (--) evdev: Dell WMI hotkeys: Found keys
[    13.913] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[    13.913] (**) Option "config_info" "udev:/sys/devices/virtual/input/input13/event13"
[    13.913] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 12)
[    13.913] (**) Option "xkb_rules" "evdev"
[    13.913] (**) Option "xkb_model" "pc105"
[    13.913] (**) Option "xkb_layout" "se"
[    14.087] (II) config/udev: Adding input device DualPoint Stick (/dev/input/mouse0)
[    14.087] (II) No input driver specified, ignoring this device.
[    14.087] (II) This device may have been added with another device file.
[    14.087] (II) config/udev: Adding input device DualPoint Stick (/dev/input/event14)
[    14.087] (**) DualPoint Stick: Applying InputClass "evdev pointer catchall"
[    14.087] (**) DualPoint Stick: Applying InputClass "trackpoint catchall"
[    14.087] (II) Using input driver 'evdev' for 'DualPoint Stick'
[    14.087] (**) DualPoint Stick: always reports core events
[    14.087] (**) evdev: DualPoint Stick: Device: "/dev/input/event14"
[    14.087] (--) evdev: DualPoint Stick: Vendor 0x2 Product 0x8
[    14.087] (--) evdev: DualPoint Stick: Found 3 mouse buttons
[    14.087] (--) evdev: DualPoint Stick: Found relative axes
[    14.087] (--) evdev: DualPoint Stick: Found x and y relative axes
[    14.087] (II) evdev: DualPoint Stick: Configuring as mouse
[    14.087] (**) Option "Emulate3Buttons" "true"
[    14.087] (**) Option "EmulateWheel" "true"
[    14.087] (**) Option "EmulateWheelButton" "2"
[    14.087] (**) Option "YAxisMapping" "4 5"
[    14.087] (**) evdev: DualPoint Stick: YAxisMapping: buttons 4 and 5
[    14.087] (**) Option "XAxisMapping" "6 7"
[    14.087] (**) evdev: DualPoint Stick: XAxisMapping: buttons 6 and 7
[    14.087] (**) evdev: DualPoint Stick: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    14.087] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input14/event14"
[    14.088] (II) XINPUT: Adding extended input device "DualPoint Stick" (type: MOUSE, id 13)
[    14.088] (II) evdev: DualPoint Stick: initialized for relative axes.
[    14.088] (**) DualPoint Stick: (accel) keeping acceleration scheme 1
[    14.088] (**) DualPoint Stick: (accel) acceleration profile 0
[    14.088] (**) DualPoint Stick: (accel) acceleration factor: 2.000
[    14.088] (**) DualPoint Stick: (accel) acceleration threshold: 4
[    14.101] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/event15)
[    14.101] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "evdev touchpad catchall"
[    14.101] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "touchpad catchall"
[    14.101] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "Default clickpad buttons"
[    14.101] (II) LoadModule: "synaptics"
[    14.102] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    14.102] (II) Module synaptics: vendor="X.Org Foundation"
[    14.102] 	compiled for 1.14.2, module version = 1.7.1
[    14.102] 	Module class: X.Org XInput Driver
[    14.102] 	ABI class: X.Org XInput driver, version 19.1
[    14.102] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS DualPoint TouchPad'
[    14.102] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[    14.102] (**) Option "Device" "/dev/input/event15"
[    14.180] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: ignoring touch events for semi-multitouch device
[    14.180] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: x-axis range 0 - 2000 (res 0)
[    14.180] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: y-axis range 0 - 1400 (res 0)
[    14.180] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: pressure range 0 - 127
[    14.180] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: device does not report finger width.
[    14.180] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: buttons: left right middle double triple
[    14.180] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: Vendor 0x2 Product 0x8
[    14.180] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: invalid finger width range.  defaulting to 0 - 15
[    14.180] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[    14.180] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[    14.200] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input15/event15"
[    14.200] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD, id 14)
[    14.200] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    14.200] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) MaxSpeed is now 1.75
[    14.200] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) AccelFactor is now 0.082
[    14.200] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) keeping acceleration scheme 1
[    14.200] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration profile 1
[    14.200] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration factor: 2.000
[    14.200] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration threshold: 4
[    14.200] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[    14.200] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/mouse1)
[    14.200] (**) AlpsPS/2 ALPS DualPoint TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    31.665] (II) XKB: reuse xkmfile /var/lib/xkb/server-B345A6290A90F686BA69FEF01421689CFC38762D.xkm
[    31.777] (II) intel(0): EDID vendor "AUO", prod id 4413
[    31.777] (II) intel(0): Printing DDC gathered Modelines:
[    31.777] (II) intel(0): Modeline "1920x1080"x0.0  141.00  1920 1936 1952 2104  1080 1083 1097 1116 +hsync -vsync (67.0 kHz eP)
[    31.904] (II) intel(0): EDID vendor "AUO", prod id 4413
[    31.904] (II) intel(0): Printing DDC gathered Modelines:
[    31.904] (II) intel(0): Modeline "1920x1080"x0.0  141.00  1920 1936 1952 2104  1080 1083 1097 1116 +hsync -vsync (67.0 kHz eP)
[    32.071] (II) intel(0): EDID vendor "AUO", prod id 4413
[    32.071] (II) intel(0): Printing DDC gathered Modelines:
[    32.071] (II) intel(0): Modeline "1920x1080"x0.0  141.00  1920 1936 1952 2104  1080 1083 1097 1116 +hsync -vsync (67.0 kHz eP)
[    32.129] (II) XKB: reuse xkmfile /var/lib/xkb/server-B345A6290A90F686BA69FEF01421689CFC38762D.xkm
[    32.146] (II) XKB: reuse xkmfile /var/lib/xkb/server-8350A4A3711CA0DBCB29548C87C0D195B5B0EF60.xkm
[    32.978] (II) XKB: reuse xkmfile /var/lib/xkb/server-F460746FB28D90B40B7E9BAA4CF91B25B7DF17E9.xkm
[    32.981] (II) XKB: reuse xkmfile /var/lib/xkb/server-F460746FB28D90B40B7E9BAA4CF91B25B7DF17E9.xkm
[    32.984] (II) XKB: reuse xkmfile /var/lib/xkb/server-F460746FB28D90B40B7E9BAA4CF91B25B7DF17E9.xkm
[    32.987] (II) XKB: reuse xkmfile /var/lib/xkb/server-F460746FB28D90B40B7E9BAA4CF91B25B7DF17E9.xkm
[    32.990] (II) XKB: reuse xkmfile /var/lib/xkb/server-F460746FB28D90B40B7E9BAA4CF91B25B7DF17E9.xkm
[    32.993] (II) XKB: reuse xkmfile /var/lib/xkb/server-F460746FB28D90B40B7E9BAA4CF91B25B7DF17E9.xkm
[    32.996] (II) XKB: reuse xkmfile /var/lib/xkb/server-F460746FB28D90B40B7E9BAA4CF91B25B7DF17E9.xkm
[    32.999] (II) XKB: reuse xkmfile /var/lib/xkb/server-F460746FB28D90B40B7E9BAA4CF91B25B7DF17E9.xkm
[    33.003] (II) XKB: reuse xkmfile /var/lib/xkb/server-F460746FB28D90B40B7E9BAA4CF91B25B7DF17E9.xkm
Top
Aqualize

Re: Cinnamon going to software rendering for some users

Post by Aqualize »

Yes forgot dmesg (the same for working and not working) (I had to shortend it, so I removed a lot of lines that looked like this: [ 0.000000] gran_size: 256K chunk_size: 256M num_reg: 10 lose cover RAM: 0G)

Code: Select all

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.11.0-15-generic (buildd@roseapple) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu8) ) #25-Ubuntu SMP Thu Jan 30 17:22:01 UTC 2014 (Ubuntu 3.11.0-15.25-generic 3.11.10)
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.11.0-15-generic root=/dev/mapper/mint--vg-root ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cf34cfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cf34d000-0x00000000cf353fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cf354000-0x00000000cff78fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cff79000-0x00000000d044dfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d044e000-0x00000000d7db3fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d7db4000-0x00000000d7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d8000000-0x00000000d8758fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d8759000-0x00000000d87fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d8800000-0x00000000d8f95fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d8f96000-0x00000000d8ffffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000d9000000-0x00000000da71bfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000da71c000-0x00000000da7fffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000da800000-0x00000000dbcf6fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dbcf7000-0x00000000dbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041edfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Dell Inc. Latitude E7440/07F3F4, BIOS A07 01/02/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x41ee00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7C00000000 write-back
[    0.000000]   1 base 0400000000 mask 7FE0000000 write-back
[    0.000000]   2 base 00E0000000 mask 7FE0000000 uncachable
[    0.000000]   3 base 00DE000000 mask 7FFE000000 uncachable
[    0.000000]   4 base 00DD000000 mask 7FFF000000 uncachable
[    0.000000]   5 base 041F000000 mask 7FFF000000 uncachable
[    0.000000]   6 base 041EE00000 mask 7FFFE00000 uncachable
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 16GB, type WB
[    0.000000] reg 1, base: 16GB, range: 512MB, type WB
[    0.000000] reg 2, base: 3584MB, range: 512MB, type UC
[    0.000000] reg 3, base: 3552MB, range: 32MB, type UC
[    0.000000] reg 4, base: 3536MB, range: 16MB, type UC
[    0.000000] reg 5, base: 16880MB, range: 16MB, type UC
[    0.000000] reg 6, base: 16878MB, range: 2MB, type UC
[    0.000000] total RAM covered: 16318M
[    0.000000] mtrr_cleanup: can not find optimal value
[    0.000000] please specify mtrr_gran_size/mtrr_chunk_size
[    0.000000] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdbcf7 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd980-0x000fd98f] mapped at [ffff8800000fd980]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fd1000, 0x01fd1fff] PGTABLE
[    0.000000] BRK [0x01fd2000, 0x01fd2fff] PGTABLE
[    0.000000] BRK [0x01fd3000, 0x01fd3fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x41ec00000-0x41edfffff]
[    0.000000]  [mem 0x41ec00000-0x41edfffff] page 2M
[    0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x41c000000-0x41ebfffff]
[    0.000000]  [mem 0x41c000000-0x41ebfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x400000000-0x41bffffff]
[    0.000000]  [mem 0x400000000-0x41bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xcf34cfff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0xbfffffff] page 1G
[    0.000000]  [mem 0xc0000000-0xcf1fffff] page 2M
[    0.000000]  [mem 0xcf200000-0xcf34cfff] page 4k
[    0.000000] init_memory_mapping: [mem 0xcf354000-0xcff78fff]
[    0.000000]  [mem 0xcf354000-0xcf3fffff] page 4k
[    0.000000]  [mem 0xcf400000-0xcfdfffff] page 2M
[    0.000000]  [mem 0xcfe00000-0xcff78fff] page 4k
[    0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xd044e000-0xd7db3fff]
[    0.000000]  [mem 0xd044e000-0xd05fffff] page 4k
[    0.000000]  [mem 0xd0600000-0xd7bfffff] page 2M
[    0.000000]  [mem 0xd7c00000-0xd7db3fff] page 4k
[    0.000000] BRK [0x01fd6000, 0x01fd6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xd8000000-0xd8758fff]
[    0.000000]  [mem 0xd8000000-0xd85fffff] page 2M
[    0.000000]  [mem 0xd8600000-0xd8758fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xd8800000-0xd8f95fff]
[    0.000000]  [mem 0xd8800000-0xd8dfffff] page 2M
[    0.000000]  [mem 0xd8e00000-0xd8f95fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xd9000000-0xda71bfff]
[    0.000000]  [mem 0xd9000000-0xda5fffff] page 2M
[    0.000000]  [mem 0xda600000-0xda71bfff] page 4k
[    0.000000] init_memory_mapping: [mem 0xda800000-0xdbcf6fff]
[    0.000000]  [mem 0xda800000-0xdbbfffff] page 2M
[    0.000000]  [mem 0xdbc00000-0xdbcf6fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[    0.000000]  [mem 0x100000000-0x3ffffffff] page 1G
[    0.000000] RAMDISK: [mem 0x34b2a000-0x3658cfff]
[    0.000000] ACPI: RSDP 00000000000eee30 00024 (v02 DELL  )
[    0.000000] ACPI: XSDT 00000000d8fd6088 00094 (v01 DELL    CBX3    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 00000000d8fe7908 0010C (v05 DELL    CBX3    01072009 AMI  00010013)
[    0.000000] ACPI Error: Gpe0Block - 32-bit FADT register is too long (32 bytes, 256 bits) to convert to GAS struct - 255 bits max, truncating (20130517/tbfadt-202)
[    0.000000] ACPI: DSDT 00000000d8fd61b0 11751 (v02 DELL    CBX3    00000014 INTL 20120711)
[    0.000000] ACPI: FACS 00000000da7fe080 00040
[    0.000000] ACPI: APIC 00000000d8fe7a18 00072 (v03 DELL    CBX3    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 00000000d8fe7a90 00044 (v01 DELL    CBX3    01072009 AMI  00010013)
[    0.000000] ACPI: SLIC 00000000d8fe7ad8 00176 (v03 DELL    CBX3    01072009 MSFT 00010013)
[    0.000000] ACPI: LPIT 00000000d8fe7c50 0005C (v01 DELL    CBX3    00000000 AMI. 00000005)
[    0.000000] ACPI: SSDT 00000000d8fe7cb0 00228 (v01  INTEL sensrhub 00000000 INTL 20120711)
[    0.000000] ACPI: SSDT 00000000d8fe7ed8 0051F (v01  PmRef  Cpu0Ist 00003000 INTL 20120711)
[    0.000000] ACPI: SSDT 00000000d8fe83f8 00AD8 (v01  PmRef    CpuPm 00003000 INTL 20120711)
[    0.000000] ACPI: HPET 00000000d8fe8ed0 00038 (v01 DELL    CBX3    01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 00000000d8fe8f08 00455 (v01 SataRe SataTabl 00001000 INTL 20120711)
[    0.000000] ACPI: MCFG 00000000d8fe9360 0003C (v01 DELL    CBX3    01072009 MSFT 00000097)
[    0.000000] ACPI: ASF! 00000000d8fe93a0 000A5 (v32 INTEL       HCG 00000001 TFSM 000F4240)
[    0.000000] ACPI: MSDM 00000000d8fe9448 00055 (v03 DELL    CBX3    06222004 AMI  00010013)
[    0.000000] ACPI: DMAR 00000000d8fe94a0 000B0 (v01 INTEL      HSW  00000001 INTL 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000041edfffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x41edfffff]
[    0.000000]   NODE_DATA [mem 0x41edf4000-0x41edf8fff]
[    0.000000]  [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040e400000-ffff88041e3fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x41edfffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0xcf34cfff]
[    0.000000]   node   0: [mem 0xcf354000-0xcff78fff]
[    0.000000]   node   0: [mem 0xd044e000-0xd7db3fff]
[    0.000000]   node   0: [mem 0xd8000000-0xd8758fff]
[    0.000000]   node   0: [mem 0xd8800000-0xd8f95fff]
[    0.000000]   node   0: [mem 0xd9000000-0xda71bfff]
[    0.000000]   node   0: [mem 0xda800000-0xdbcf6fff]
[    0.000000]   node   0: [mem 0x100000000-0x41edfffff]
[    0.000000] On node 0 totalpages: 4170102
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13968 pages used for memmap
[    0.000000]   DMA32 zone: 893914 pages, LIFO batch:31
[    0.000000]   Normal zone: 51128 pages used for memmap
[    0.000000]   Normal zone: 3272192 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-39
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 56
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcf34d000-0xcf353fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcff79000-0xd044dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xd7db4000-0xd7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd8759000-0xd87fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd8f96000-0xd8ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xda71c000-0xda7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdbcf7000-0xdbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdc000000-0xdcffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdd000000-0xdf1fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88041ea00000 s86720 r8192 d23872 u524288
[    0.000000] pcpu-alloc: s86720 r8192 d23872 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4104921
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.11.0-15-generic root=/dev/mapper/mint--vg-root ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 16308120K/16680408K available (7149K kernel code, 1082K rwdata, 3312K rodata, 1364K init, 1420K bss, 372288K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000] 	Offload RCU callbacks from all CPUs
[    0.000000] 	Offload RCU callbacks from CPUs: 0-255.
[    0.000000] NR_IRQS:16640 nr_irqs:984 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 67108864 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2693.782 MHz processor
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5387.56 BogoMIPS (lpj=10775128)
[    0.000004] pid_max: default: 32768 minimum: 301
[    0.000019] Security Framework initialized
[    0.000031] AppArmor: AppArmor initialized
[    0.000031] Yama: becoming mindful.
[    0.000704] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.002980] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.003977] Mount-cache hash table entries: 256
[    0.004099] Initializing cgroup subsys memory
[    0.004105] Initializing cgroup subsys devices
[    0.004106] Initializing cgroup subsys freezer
[    0.004107] Initializing cgroup subsys blkio
[    0.004108] Initializing cgroup subsys perf_event
[    0.004109] Initializing cgroup subsys hugetlb
[    0.004126] CPU: Physical Processor ID: 0
[    0.004127] CPU: Processor Core ID: 0
[    0.004130] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.004130] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.004967] mce: CPU supports 7 MCE banks
[    0.004976] CPU0: Thermal monitoring enabled (TM1)
[    0.004984] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.004984] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
[    0.004984] tlb_flushall_shift: 6
[    0.005069] Freeing SMP alternatives memory: 28K (ffffffff81e65000 - ffffffff81e6c000)
[    0.006425] ACPI: Core revision 20130517
[    0.013592] ACPI: All ACPI Tables successfully acquired
[    0.014373] ftrace: allocating 27844 entries in 109 pages
[    0.023368] dmar: Host address width 39
[    0.023370] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[    0.023375] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[    0.023377] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[    0.023380] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
[    0.023381] dmar: RMRR base: 0x000000d7f18000 end: 0x000000d7f26fff
[    0.023382] dmar: RMRR base: 0x000000dd000000 end: 0x000000df1fffff
[    0.023519] IOAPIC id 8 under DRHD base  0xfed91000 IOMMU 1
[    0.023520] HPET id 0 under DRHD base 0xfed91000
[    0.023638] Enabled IRQ remapping in x2apic mode
[    0.023639] Enabling x2apic
[    0.023640] Enabled x2apic
[    0.023645] Switched APIC routing to cluster x2apic.
[    0.024240] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.063909] smpboot: CPU0: Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz (fam: 06, model: 45, stepping: 01)
[    0.063916] TSC deadline timer enabled
[    0.063922] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[    0.063927] ... version:                3
[    0.063928] ... bit width:              48
[    0.063928] ... generic registers:      4
[    0.063929] ... value mask:             0000ffffffffffff
[    0.063930] ... max period:             0000ffffffffffff
[    0.063930] ... fixed-purpose events:   3
[    0.063931] ... event mask:             000000070000000f
[    0.079100] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.064998] smpboot: Booting Node   0, Processors  #1 #2 #3 OK
[    0.106887] Brought up 4 CPUs
[    0.106890] smpboot: Total of 4 processors activated (21550.25 BogoMIPS)
[    0.110214] devtmpfs: initialized
[    0.111309] EVM: security.selinux
[    0.111310] EVM: security.SMACK64
[    0.111311] EVM: security.capability
[    0.111342] PM: Registering ACPI NVS region [mem 0xcf34d000-0xcf353fff] (28672 bytes)
[    0.111344] PM: Registering ACPI NVS region [mem 0xda71c000-0xda7fffff] (933888 bytes)
[    0.111873] regulator-dummy: no parameters
[    0.111900] RTC time: 14:03:24, date: 02/18/14
[    0.111921] NET: Registered protocol family 16
[    0.112009] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.112010] ACPI: bus type PCI registered
[    0.112011] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.112044] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.112046] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.117958] PCI: Using configuration type 1 for base access
[    0.117963] dmi type 0xB1 record - unknown flag
[    0.118577] bio: create slab <bio-0> at 0
[    0.118680] ACPI: Added _OSI(Module Device)
[    0.118681] ACPI: Added _OSI(Processor Device)
[    0.118682] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.118683] ACPI: Added _OSI(Processor Aggregator Device)
[    0.120241] ACPI: EC: Look up EC in DSDT
[    0.121827] ACPI: Executed 1 blocks of module-level executable AML code
[    0.127558] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.210201] ACPI: SSDT 00000000dbdb0c18 003D3 (v01  PmRef  Cpu0Cst 00003001 INTL 20120711)
[    0.210629] ACPI: Dynamic OEM Table Load:
[    0.210630] ACPI: SSDT           (null) 003D3 (v01  PmRef  Cpu0Cst 00003001 INTL 20120711)
[    0.214302] ACPI: SSDT 00000000dbdb0618 005AA (v01  PmRef    ApIst 00003000 INTL 20120711)
[    0.214783] ACPI: Dynamic OEM Table Load:
[    0.214784] ACPI: SSDT           (null) 005AA (v01  PmRef    ApIst 00003000 INTL 20120711)
[    0.218190] ACPI: SSDT 00000000dbdafd98 00119 (v01  PmRef    ApCst 00003000 INTL 20120711)
[    0.218614] ACPI: Dynamic OEM Table Load:
[    0.218616] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20120711)
[    0.234156] ACPI: Interpreter enabled
[    0.234162] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
[    0.234167] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[    0.234182] ACPI: (supports S0 S3 S4 S5)
[    0.234183] ACPI: Using IOAPIC for interrupt routing
[    0.234206] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.234336] ACPI: No dock devices found.
[    0.479335] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.479507] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[    0.479641] acpi PNP0A08:00: ACPI _OSC control (0x18) granted
[    0.479989] PCI host bridge to bus 0000:00
[    0.479991] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.479992] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.479993] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.479994] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.479995] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.479996] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.479997] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.479998] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.479999] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.480000] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    0.480001] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff]
[    0.480007] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[    0.480077] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[    0.480086] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[    0.480091] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.480095] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.480156] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[    0.480162] pci 0000:00:03.0: reg 0x10: [mem 0xf7e34000-0xf7e37fff 64bit]
[    0.480243] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[    0.480257] pci 0000:00:14.0: reg 0x10: [mem 0xf7e20000-0xf7e2ffff 64bit]
[    0.480304] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.480340] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.480363] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[    0.480380] pci 0000:00:16.0: reg 0x10: [mem 0xf7e3f000-0xf7e3f01f 64bit]
[    0.480437] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.480499] pci 0000:00:19.0: [8086:155a] type 00 class 0x020000
[    0.480512] pci 0000:00:19.0: reg 0x10: [mem 0xf7e00000-0xf7e1ffff]
[    0.480518] pci 0000:00:19.0: reg 0x14: [mem 0xf7e3c000-0xf7e3cfff]
[    0.480524] pci 0000:00:19.0: reg 0x18: [io  0xf080-0xf09f]
[    0.480571] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.490256] pci 0000:00:19.0: System wakeup disabled by ACPI
[    0.490286] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[    0.490298] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e30000-0xf7e33fff 64bit]
[    0.490351] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.490393] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.490416] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[    0.490478] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.490521] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.490545] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[    0.490608] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.490652] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.490674] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
[    0.490737] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.490781] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.490810] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[    0.490827] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e3b000-0xf7e3b3ff]
[    0.490906] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.490948] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.490974] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[    0.491129] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[    0.491141] pci 0000:00:1f.2: reg 0x10: [io  0xf0d0-0xf0d7]
[    0.491147] pci 0000:00:1f.2: reg 0x14: [io  0xf0c0-0xf0c3]
[    0.491153] pci 0000:00:1f.2: reg 0x18: [io  0xf0b0-0xf0b7]
[    0.491158] pci 0000:00:1f.2: reg 0x1c: [io  0xf0a0-0xf0a3]
[    0.491164] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.491170] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e3a000-0xf7e3a7ff]
[    0.491199] pci 0000:00:1f.2: PME# supported from D3hot
[    0.491253] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[    0.491265] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e39000-0xf7e390ff 64bit]
[    0.491281] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.491388] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.491517] pci 0000:02:00.0: [8086:08b1] type 00 class 0x028000
[    0.491548] pci 0000:02:00.0: reg 0x10: [mem 0xf7d00000-0xf7d01fff 64bit]
[    0.491762] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.491796] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.501384] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.501388] pci 0000:00:1c.3:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    0.503265] pci 0000:03:00.0: [1217:8520] type 00 class 0x080501
[    0.503282] pci 0000:03:00.0: reg 0x10: [mem 0xf7c01000-0xf7c01fff]
[    0.503294] pci 0000:03:00.0: reg 0x14: [mem 0xf7c00000-0xf7c007ff]
[    0.503406] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.503433] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.515143] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.515146] pci 0000:00:1c.4:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.515160] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[    0.542664] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.542701] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.542736] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.542772] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.542806] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.542841] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.542875] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.542910] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.566833] ACPI: Enabled 2 GPEs in block 00 to 7F
[    0.566838] ACPI: \_SB_.PCI0: notify handler is installed
[    0.566899] Found 1 acpi root devices
[    0.566934] ACPI: EC: GPE = 0x27, I/O: command/status = 0x934, data = 0x930
[    0.566998] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.567000] vgaarb: loaded
[    0.567001] vgaarb: bridge control possible 0000:00:02.0
[    0.567108] SCSI subsystem initialized
[    0.567109] ACPI: bus type ATA registered
[    0.567145] libata version 3.00 loaded.
[    0.567167] ACPI: bus type USB registered
[    0.567177] usbcore: registered new interface driver usbfs
[    0.567183] usbcore: registered new interface driver hub
[    0.567203] usbcore: registered new device driver usb
[    0.567279] PCI: Using ACPI for IRQ routing
[    0.568410] PCI: pci_cache_line_size set to 64 bytes
[    0.568444] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    0.568446] e820: reserve RAM buffer [mem 0xcf34d000-0xcfffffff]
[    0.568447] e820: reserve RAM buffer [mem 0xcff79000-0xcfffffff]
[    0.568448] e820: reserve RAM buffer [mem 0xd7db4000-0xd7ffffff]
[    0.568448] e820: reserve RAM buffer [mem 0xd8759000-0xdbffffff]
[    0.568450] e820: reserve RAM buffer [mem 0xd8f96000-0xdbffffff]
[    0.568451] e820: reserve RAM buffer [mem 0xda71c000-0xdbffffff]
[    0.568452] e820: reserve RAM buffer [mem 0xdbcf7000-0xdbffffff]
[    0.568453] e820: reserve RAM buffer [mem 0x41ee00000-0x41fffffff]
[    0.568508] NetLabel: Initializing
[    0.568509] NetLabel:  domain hash size = 128
[    0.568510] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.568516] NetLabel:  unlabeled traffic allowed by default
[    0.568555] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.568559] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.570575] Switched to clocksource hpet
[    0.573620] AppArmor: AppArmor Filesystem Enabled
[    0.573634] pnp: PnP ACPI init
[    0.573642] ACPI: bus type PNP registered
[    0.573697] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.573699] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.573773] pnp 00:01: [dma 4]
[    0.573782] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.573793] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.573863] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.573948] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.573949] system 00:04: [io  0xffff] has been reserved
[    0.573950] system 00:04: [io  0xffff] has been reserved
[    0.573951] system 00:04: [io  0xffff] has been reserved
[    0.573953] system 00:04: [io  0x1c00-0x1cfe] has been reserved
[    0.573954] system 00:04: [io  0x1d00-0x1dfe] has been reserved
[    0.573955] system 00:04: [io  0x1e00-0x1efe] has been reserved
[    0.573956] system 00:04: [io  0x1f00-0x1ffe] has been reserved
[    0.573958] system 00:04: [io  0x1800-0x18fe] could not be reserved
[    0.573959] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.573961] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.573981] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.574008] system 00:06: [io  0x1854-0x1857] has been reserved
[    0.574009] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.574035] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.574037] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.574066] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.574083] pnp 00:09: Plug and Play ACPI device, IDs DLL05cb PNP0f13 (active)
[    0.598648] pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (disabled)
[    0.598851] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.599042] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.599043] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.599045] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.599046] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.599048] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.599049] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.599050] system 00:0c: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.599052] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.599053] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
[    0.599055] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.599056] system 00:0c: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[    0.599057] system 00:0c: [mem 0xf7fe0000-0xf7feffff] has been reserved
[    0.599059] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.599088] pnp 00:0d: Plug and Play ACPI device, IDs SMO8810 (active)
[    0.630605] pnp: PnP ACPI: found 14 devices
[    0.630607] ACPI: bus type PNP unregistered
[    0.636304] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.636312] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.636316] pci 0000:00:1c.3:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    0.636321] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.636324] pci 0000:00:1c.4:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.638764] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.638766] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.638767] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.638768] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.638769] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.638771] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.638772] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[    0.638773] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[    0.638774] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[    0.638775] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff]
[    0.638777] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff]
[    0.638778] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.638800] NET: Registered protocol family 2
[    0.638976] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[    0.639230] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.639334] TCP: Hash tables configured (established 131072 bind 65536)
[    0.639350] TCP: reno registered
[    0.639363] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.639402] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.639465] NET: Registered protocol family 1
[    0.639473] pci 0000:00:02.0: Boot video device
[    0.658629] PCI: CLS 64 bytes, default 64
[    0.658660] Trying to unpack rootfs image as initramfs...
[    0.974341] Freeing initrd memory: 27020K (ffff880034b2a000 - ffff88003658d000)
[    0.974349] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.974351] software IO TLB [mem 0xd3db4000-0xd7db4000] (64MB) mapped at [ffff8800d3db4000-ffff8800d7db3fff]
[    0.974477] Scanning for low memory corruption every 60 seconds
[    0.974631] Initialise module verification
[    0.974659] audit: initializing netlink socket (disabled)
[    0.974665] type=2000 audit(1392732204.972:1): initialized
[    0.993925] bounce pool size: 64 pages
[    0.993931] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.994867] zbud: loaded
[    0.994955] VFS: Disk quotas dquot_6.5.2
[    0.994979] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.995258] fuse init (API version 7.22)
[    0.995302] msgmni has been set to 31904
[    0.995610] Key type asymmetric registered
[    0.995612] Asymmetric key parser 'x509' registered
[    0.995630] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.995651] io scheduler noop registered
[    0.995652] io scheduler deadline registered (default)
[    0.995666] io scheduler cfq registered
[    0.995791] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.995799] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.995829] intel_idle: MWAIT substates: 0x11142120
[    0.995830] intel_idle: v0.4 model 0x45
[    0.995831] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.996608] ACPI: AC Adapter [AC] (on-line)
[    0.996702] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    0.997330] ACPI: Lid Switch [LID0]
[    0.997355] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.997358] ACPI: Power Button [PBTN]
[    0.997377] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    0.997379] ACPI: Sleep Button [SBTN]
[    0.997399] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.997401] ACPI: Power Button [PWRF]
[    0.997680] ACPI: Requesting acpi_cpufreq
[    1.042464] thermal LNXTHERM:00: registered as thermal_zone0
[    1.042466] ACPI: Thermal Zone [THM] (25 C)
[    1.042491] GHES: HEST is not enabled!
[    1.042539] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.044827] Linux agpgart interface v0.103
[    1.045632] brd: module loaded
[    1.046045] loop: module loaded
[    1.046244] libphy: Fixed MDIO Bus: probed
[    1.046292] tun: Universal TUN/TAP device driver, 1.6
[    1.046293] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.046323] PPP generic driver version 2.4.2
[    1.046351] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.046352] ehci-pci: EHCI PCI platform driver
[    1.046443] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    1.046448] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.046452] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    1.046470] ehci-pci 0000:00:1d.0: debug port 2
[    1.050371] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.050384] ehci-pci 0000:00:1d.0: irq 21, io mem 0xf7e3b000
[    1.058407] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.058419] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.058420] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.058422] usb usb1: Product: EHCI Host Controller
[    1.058423] usb usb1: Manufacturer: Linux 3.11.0-15-generic ehci_hcd
[    1.058424] usb usb1: SerialNumber: 0000:00:1d.0
[    1.058492] hub 1-0:1.0: USB hub found
[    1.058494] hub 1-0:1.0: 2 ports detected
[    1.058568] ehci-platform: EHCI generic platform driver
[    1.058573] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.058574] ohci-pci: OHCI PCI platform driver
[    1.058579] ohci-platform: OHCI generic platform driver
[    1.058582] uhci_hcd: USB Universal Host Controller Interface driver
[    1.058665] xhci_hcd 0000:00:14.0: setting latency timer to 64
[    1.058667] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.058670] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.058733] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.058749] xhci_hcd 0000:00:14.0: irq 58 for MSI/MSI-X
[    1.058782] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.058784] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.058785] usb usb2: Product: xHCI Host Controller
[    1.058786] usb usb2: Manufacturer: Linux 3.11.0-15-generic xhci_hcd
[    1.058787] usb usb2: SerialNumber: 0000:00:14.0
[    1.058837] xHCI xhci_add_endpoint called for root hub
[    1.058838] xHCI xhci_check_bandwidth called for root hub
[    1.058851] hub 2-0:1.0: USB hub found
[    1.058868] hub 2-0:1.0: 9 ports detected
[    1.059910] ACPI: Battery Slot [BAT0] (battery present)
[    1.086786] ACPI: Battery Slot [BAT1] (battery absent)
[    1.087375] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.087378] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.087394] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[    1.087395] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.087396] usb usb3: Product: xHCI Host Controller
[    1.087397] usb usb3: Manufacturer: Linux 3.11.0-15-generic xhci_hcd
[    1.087398] usb usb3: SerialNumber: 0000:00:14.0
[    1.087446] xHCI xhci_add_endpoint called for root hub
[    1.087447] xHCI xhci_check_bandwidth called for root hub
[    1.087460] hub 3-0:1.0: USB hub found
[    1.087464] hub 3-0:1.0: 4 ports detected
[    1.098427] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.098942] i8042: Warning: Keylock active
[    1.101296] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.101299] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.101363] mousedev: PS/2 mouse device common for all mice
[    1.101468] rtc_cmos 00:05: RTC can wake from S4
[    1.101573] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.101596] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.101633] device-mapper: uevent: version 1.0.3
[    1.101674] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[    1.101745] cpuidle: using governor ladder
[    1.101848] cpuidle: using governor menu
[    1.101854] ledtrig-cpu: registered to indicate activity on CPUs
[    1.101913] TCP: cubic registered
[    1.101973] NET: Registered protocol family 10
[    1.102089] NET: Registered protocol family 17
[    1.102098] Key type dns_resolver registered
[    1.102242] PM: Hibernation image not present or could not be loaded.
[    1.102245] Loading module verification certificates
[    1.102838] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 233c65a83836c14ba34eda83a0b805044bc3b448'
[    1.102844] registered taskstats version 1
[    1.103480] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.105710] Key type trusted registered
[    1.106800] Key type encrypted registered
[    1.107900] AppArmor: AppArmor sha1 policy hashing enabled
[    1.108162]   Magic number: 2:325:81
[    1.108235] rtc_cmos 00:05: setting system clock to 2014-02-18 14:03:25 UTC (1392732205)
[    1.108818] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.108820] EDD information not available.
[    1.109448] Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
[    1.109449] Write protecting the kernel read-only data: 12288k
[    1.111037] Freeing unused kernel memory: 1032K (ffff8800016fe000 - ffff880001800000)
[    1.112153] Freeing unused kernel memory: 784K (ffff880001b3c000 - ffff880001c00000)
[    1.120772] systemd-udevd[117]: starting version 204
[    1.135999] wmi: Mapper loaded
[    1.136665] pps_core: LinuxPPS API ver. 1 registered
[    1.136668] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.137911] PTP clock support registered
[    1.140708] [drm] Initialized drm 1.1.0 20060810
[    1.142450] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.142452] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.142580] e1000e 0000:00:19.0: setting latency timer to 64
[    1.142639] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.142657] e1000e 0000:00:19.0: irq 59 for MSI/MSI-X
[    1.144065] sdhci: Secure Digital Host Controller Interface driver
[    1.144067] sdhci: Copyright(c) Pierre Ossman
[    1.144916] sdhci-pci 0000:03:00.0: SDHCI controller found [1217:8520] (rev 1)
[    1.144973] mmc0: Unknown controller version (3). You may experience problems.
[    1.144979] mmc0: Hardware doesn't specify timeout clock frequency.
[    1.306501] e1000e 0000:00:19.0 eth0: registered PHC clock
[    1.306505] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) ec:f4:bb:0b:c9:07
[    1.306507] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.306540] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[    1.306572] ahci 0000:00:1f.2: version 3.0
[    1.306701] ahci 0000:00:1f.2: irq 60 for MSI/MSI-X
[    1.306720] ahci: SSS flag set, parallel bus scan disabled
[    1.322374] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
[    1.322378] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag led clo only pio slum part sxs deso sadm sds apst 
[    1.322381] ahci 0000:00:1f.2: setting latency timer to 64
[    1.322648] scsi0 : ahci
[    1.322709] scsi1 : ahci
[    1.322773] scsi2 : ahci
[    1.322829] scsi3 : ahci
[    1.322893] ata1: SATA max UDMA/133 abar m2048@0xf7e3a000 port 0xf7e3a100 irq 60
[    1.322894] ata2: SATA max UDMA/133 abar m2048@0xf7e3a000 port 0xf7e3a180 irq 60
[    1.322896] ata3: DUMMY
[    1.322896] ata4: DUMMY
[    1.323639] [drm] Memory usable by graphics device = 2048M
[    1.323643] i915 0000:00:02.0: setting latency timer to 64
[    1.350447] i915 0000:00:02.0: irq 61 for MSI/MSI-X
[    1.350452] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    1.350453] [drm] Driver supports precise vblank timestamp query.
[    1.350493] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.370311] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.393086] fbcon: inteldrmfb (fb0) is primary device
[    1.502636] usb 1-1: New USB device found, idVendor=8087, idProduct=8000
[    1.502637] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.502783] hub 1-1:1.0: USB hub found
[    1.502888] hub 1-1:1.0: 8 ports detected
[    1.646234] ata1: SATA link down (SStatus 0 SControl 300)
[    1.670225] usb 2-4: new high-speed USB device number 2 using xhci_hcd
[    1.760825] usb 2-4: New USB device found, idVendor=0c45, idProduct=64d2
[    1.760827] usb 2-4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    1.760827] usb 2-4: Product: Laptop_Integrated_Webcam_HD
[    1.760828] usb 2-4: Manufacturer: CN07YYTT72487419A6B7A00
[    1.934130] usb 2-7: new high-speed USB device number 3 using xhci_hcd
[    1.950901] usb 2-7: config 1 has an invalid interface number: 8 but max is 3
[    1.950902] usb 2-7: config 1 has no interface number 1
[    1.951307] usb 2-7: config 2 has an invalid interface number: 12 but max is 1
[    1.951308] usb 2-7: config 2 has an invalid interface number: 13 but max is 1
[    1.951309] usb 2-7: config 2 has an invalid interface number: 13 but max is 1
[    1.951310] usb 2-7: config 2 has no interface number 0
[    1.951311] usb 2-7: config 2 has no interface number 1
[    1.951944] usb 2-7: New USB device found, idVendor=413c, idProduct=81a3
[    1.951945] usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.951946] usb 2-7: Product: Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card
[    1.951947] usb 2-7: Manufacturer: Sierra Wireless, Incorporated
[    1.966153] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.968681] ata2.00: ATA-8: LITEONIT LMT-128M6M mSATA 128GB, DM7110F, max UDMA/133
[    1.968682] ata2.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.969143] ata2.00: configured for UDMA/133
[    1.969267] scsi 1:0:0:0: Direct-Access     ATA      LITEONIT LMT-128 DM71 PQ: 0 ANSI: 5
[    1.969379] sd 1:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    1.969398] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    1.969439] sd 1:0:0:0: [sda] Write Protect is off
[    1.969441] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.969461] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.969952]  sda: sda1 sda2 < sda5 >
[    1.970084] tsc: Refined TSC clocksource calibration: 2693.764 MHz
[    1.970195] sd 1:0:0:0: [sda] Attached SCSI disk
[    2.026238] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[    2.120488] usb 1-1.3: New USB device found, idVendor=8087, idProduct=07dc
[    2.120490] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.190185] usb 1-1.5: new full-speed USB device number 4 using ehci-pci
[    2.289923] usb 1-1.5: config 0 has an invalid interface number: 3 but max is 2
[    2.289925] usb 1-1.5: config 0 has no interface number 2
[    2.304671] usb 1-1.5: New USB device found, idVendor=0a5c, idProduct=5801
[    2.304672] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.304673] usb 1-1.5: Product: 5880
[    2.304674] usb 1-1.5: Manufacturer: Broadcom Corp
[    2.304675] usb 1-1.5: SerialNumber: 0123456789ABCD
[    2.304797] usb 1-1.5: config 0 descriptor??
[    2.817900] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[    2.969976] Switched to clocksource tsc
[    3.093687] Console: switching to colour frame buffer device 240x67
[    3.100371] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.100372] i915 0000:00:02.0: registered panic notifier
[    3.209730] acpi device:41: registered as cooling_device4
[    3.225754] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.225803] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[    3.225882] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    3.300862] xor: automatically using best checksumming function:
[    3.337577]    avx       : 33061.000 MB/sec
[    3.338832] device-mapper: dm-raid45: initialized v0.2594b
[   12.100059] bio: create slab <bio-1> at 1
[   12.260570] bio: create slab <bio-1> at 1
[   12.328043] EXT4-fs (dm-1): INFO: recovery required on readonly filesystem
[   12.328046] EXT4-fs (dm-1): write access will be enabled during recovery
[   12.396513] EXT4-fs (dm-1): recovery complete
[   12.398943] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[   12.592828] Adding 16683004k swap on /dev/mapper/mint--vg-swap_1.  Priority:-1 extents:1 across:16683004k SSFS
[   12.614586] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.636325] systemd-udevd[508]: starting version 204
[   12.637841] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[   12.660686] lp: driver loaded but no devices found
[   12.690515] parport_pc 00:0a: [io  0x0378-0x037b]
[   12.690559] parport_pc 00:0a: [irq 5]
[   12.717595] cfg80211: Calling CRDA to update world regulatory domain
[   12.732148] Intel(R) Wireless WiFi driver for Linux, in-tree:
[   12.732151] Copyright(c) 2003-2013 Intel Corporation
[   12.735038] mei_me 0000:00:16.0: setting latency timer to 64
[   12.735076] mei_me 0000:00:16.0: irq 62 for MSI/MSI-X
[   12.736448] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[   12.737080] iwlwifi 0000:02:00.0: irq 63 for MSI/MSI-X
[   12.744167] iwlwifi 0000:02:00.0: loaded firmware version 22.0.7.0 op_mode iwlmvm
[   12.755835] mei_me 0000:00:16.0: NFC MEI VERSION: IVN 0x1 Vendor ID 0x1 Type 0x1
[   12.763953] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
[   12.765172] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[   12.765318] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[   12.771965] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x16
[   12.777610] usbcore: registered new interface driver cdc_wdm
[   12.779058] usbcore: registered new interface driver cdc_ncm
[   12.786482] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251)
[   12.786490] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.786553] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPRL 1 (20130517/utaddress-251)
[   12.786557] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPR_ 2 (20130517/utaddress-251)
[   12.786561] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.792149] cdc_mbim 2-7:2.12: cdc-wdm0: USB WDM device
[   12.792543] cdc_mbim 2-7:2.12 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-7, CDC MBIM, 16:ba:aa:46:79:9f
[   12.792988] usbcore: registered new interface driver cdc_mbim
[   12.813310] Linux video capture interface: v2.00
[   12.825602] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (0c45:64d2)
[   12.833395] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPRL 1 (20130517/utaddress-251)
[   12.833401] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPR_ 2 (20130517/utaddress-251)
[   12.833405] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.833407] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   12.833798] HDA driver get symbol successfully from i915 module
[   12.833831] snd_hda_intel 0000:00:03.0: irq 64 for MSI/MSI-X
[   12.837587] Bluetooth: Core ver 2.16
[   12.837599] NET: Registered protocol family 31
[   12.837600] Bluetooth: HCI device and connection manager initialized
[   12.837606] Bluetooth: HCI socket layer initialized
[   12.837607] Bluetooth: L2CAP socket layer initialized
[   12.837610] Bluetooth: SCO socket layer initialized
[   12.839550] usbcore: registered new interface driver btusb
[   12.846275] hda_codec: invalid CONNECT_LIST verb 5[1]:0
[   12.846339] hda_codec: invalid CONNECT_LIST verb 6[1]:0
[   12.846402] hda_codec: invalid CONNECT_LIST verb 7[1]:0
[   12.846698] input: HDA Intel MID HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input6
[   12.846814] input: HDA Intel MID HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input7
[   12.846880] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8
[   12.854424] Bluetooth: hci0: read Intel version: 370710018002030d2e
[   12.854427] Bluetooth: hci0: Intel device is already patched. patch num: 2e
[   12.867464] input: Laptop_Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.0/input/input9
[   12.867630] usbcore: registered new interface driver uvcvideo
[   12.867632] USB Video Class driver (1.1.1)
[   12.890815] snd_hda_intel 0000:00:1b.0: irq 65 for MSI/MSI-X
[   12.906508] Bluetooth: RFCOMM TTY layer initialized
[   12.906520] Bluetooth: RFCOMM socket layer initialized
[   12.906522] Bluetooth: RFCOMM ver 1.11
[   12.913062] SKU: Nid=0x1d sku_cfg=0x40700001
[   12.913065] SKU: port_connectivity=0x1
[   12.913067] SKU: enable_pcbeep=0x1
[   12.913068] SKU: check_sum=0x00000000
[   12.913069] SKU: customization=0x00000000
[   12.913070] SKU: external_amp=0x0
[   12.913071] SKU: platform_type=0x0
[   12.913072] SKU: swap=0x0
[   12.913073] SKU: override=0x1
[   12.913380] autoconfig: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line
[   12.913382]    speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
[   12.913384]    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[   12.913385]    mono: mono_out=0x0
[   12.913386]    inputs:
[   12.913387]      Dock Mic=0x19
[   12.913389]      Headset Mic=0x1a
[   12.913390]      Internal Mic=0x12
[   12.913391] realtek: No valid SSID, checking pincfg 0x40700001 for NID 0x1d
[   12.913393] realtek: Enabling init ASM_ID=0x0001 CODEC_ID=10ec0292
[   12.920901] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[   12.921006] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[   12.921121] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[   12.936742] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   12.936746] Bluetooth: BNEP filters: protocol multicast
[   12.936753] Bluetooth: BNEP socket layer initialized
[   12.937265] init: avahi-cups-reload main process (781) terminated with status 1
[   12.948345] device-mapper: multipath: version 1.5.1 loaded
[   12.953724] ppdev: user-space parallel port driver
[   12.963548] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   12.979975] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[   13.020449] input: Dell WMI hotkeys as /devices/virtual/input/input13
[   13.033327] nfc: nfc_init: NFC Core ver 0.1
[   13.033384] NET: Registered protocol family 39
[   13.037757] Probing NFC pn544
[   13.040945] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x16
[   13.070695] cfg80211: World regulatory domain updated:
[   13.070699] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   13.070701] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.070702] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.070703] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.070704] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.070705] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.080789] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x16
[   13.081526] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x16
[   13.082318] parport_pc 00:0a: activated
[   13.082322] parport_pc 00:0a: reported by Plug and Play ACPI
[   13.082462] parport_pc 00:0a: disabled
[   13.082879] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   13.139033] init: failsafe main process (858) killed by TERM signal
[   13.365508] e1000e 0000:00:19.0: irq 59 for MSI/MSI-X
[   13.466007] e1000e 0000:00:19.0: irq 59 for MSI/MSI-X
[   13.466096] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   13.466376] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   13.467829] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[   13.467971] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[   13.475973] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   13.476218] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   13.905240] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[   13.909568] vboxdrv: Found 4 processor cores.
[   13.909700] vboxdrv: fAsync=0 offMin=0x210 offMax=0x140d
[   13.909770] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   13.909771] vboxdrv: Successfully loaded version 4.3.6 (interface 0x001a0007).
[   14.082260] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input14
[   14.097430] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input15
[   14.115764] vboxpci: IOMMU not found (not registered)
[   14.165851] init: plymouth-stop pre-start process (1760) terminated with status 1
[   17.074229] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[   17.074254] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   31.865791] ahci 0000:00:1f.2: port does not support device sleep

I've let the machines run the update manager so everything is up to date. I've also via synaptic upgraded to a newer kernel, 3.11.0-15-generic.

All machines are running 64-bit Mint.
Top
Aqualize

Re: Cinnamon going to software rendering for some users

Post by Aqualize »

I tested to create another local account, log in, log out, rename the /home/local_username folder to /home/domain_user and change owner/group for the files and folders.
Still the same problem.

But in $HOME there is the .xsession-errors file, here it comes:
Fresh boot - logging in with a domain account (that is: getting software rendering)

Code: Select all

/etc/mdm/Xsession: Beginning session setup...
localuser:christerf being added to access control list
Script for cjkv started at run_im.
Script for default started at run_im.
Failed to connect to the VirtualBox kernel service
Failed to connect to the VirtualBox kernel service
Failed to connect to the VirtualBox kernel service
Failed to connect to the VirtualBox kernel service
Failed to connect to the VirtualBox kernel service
Script for cjkv started at run_im.
Script for default started at run_im.
GNOME_KEYRING_CONTROL=/home/christerf/.cache/keyring-Q2Q4FX
GNOME_KEYRING_PID=1960
GNOME_KEYRING_CONTROL=/home/christerf/.cache/keyring-Q2Q4FX
GNOME_KEYRING_CONTROL=/home/christerf/.cache/keyring-Q2Q4FX
SSH_AUTH_SOCK=/home/christerf/.cache/keyring-Q2Q4FX/ssh
GNOME_KEYRING_CONTROL=/home/christerf/.cache/keyring-Q2Q4FX
SSH_AUTH_SOCK=/home/christerf/.cache/keyring-Q2Q4FX/ssh
GPG_AGENT_INFO=/home/christerf/.cache/keyring-Q2Q4FX/gpg:0:1
=== xinerama setup Configuration ===
  Clone: false
  Output: Laptop attached to eDP1
     status: on
     width: 1920
     height: 1080
     rate: 60
     primary: true
     position: 0 0
  Output: (null) attached to DP1
     status: off
     width: -1
     height: -1
     rate: -1
     primary: false
     position: -1 -1
  Output: (null) attached to HDMI1
     status: off
     width: -1
     height: -1
     rate: -1
     primary: false
     position: -1 -1
  Output: (null) attached to DP2
     status: off
     width: -1
     height: -1
     rate: -1
     primary: false
     position: -1 -1
  Output: (null) attached to HDMI2
     status: off
     width: -1
     height: -1
     rate: -1
     primary: false
     position: -1 -1
  Output: (null) attached to VIRTUAL1
     status: off
     width: -1
     height: -1
     rate: -1
     primary: false
     position: -1 -1
=== auto-configure - xinerama mode Configuration ===
  Clone: false
  Output: Laptop attached to eDP1
     status: on
     width: 1920
     height: 1080
     rate: 60
     primary: true
     position: 0 0
  Output: (null) attached to DP1
     status: off
     width: -1
     height: -1
     rate: -1
     primary: false
     position: -1 -1
  Output: (null) attached to HDMI1
     status: off
     width: -1
     height: -1
     rate: -1
     primary: false
     position: -1 -1
  Output: (null) attached to DP2
     status: off
     width: -1
     height: -1
     rate: -1
     primary: false
     position: -1 -1
  Output: (null) attached to HDMI2
     status: off
     width: -1
     height: -1
     rate: -1
     primary: false
     position: -1 -1
  Output: (null) attached to VIRTUAL1
     status: off
     width: -1
     height: -1
     rate: -1
     primary: false
     position: -1 -1
=== Applying Configuration Configuration ===
  Clone: false
  Output: Laptop attached to eDP1
     status: on
     width: 1920
     height: 1080
     rate: 60
     primary: true
     position: 0 0
  Output: (null) attached to DP1
     status: off
     width: -1
     height: -1
     rate: -1
     primary: false
     position: -1 -1
  Output: (null) attached to HDMI1
     status: off
     width: -1
     height: -1
     rate: -1
     primary: false
     position: -1 -1
  Output: (null) attached to DP2
     status: off
     width: -1
     height: -1
     rate: -1
     primary: false
     position: -1 -1
  Output: (null) attached to HDMI2
     status: off
     width: -1
     height: -1
     rate: -1
     primary: false
     position: -1 -1
  Output: (null) attached to VIRTUAL1
     status: off
     width: -1
     height: -1
     rate: -1
     primary: false
     position: -1 -1

(cinnamon-settings-daemon:1954): keyboard-plugin-WARNING **: Failed to set the keyboard layouts: GDBus.Error:org.freedesktop.Accounts.Error.PermissionDenied: Not authorized

(cinnamon-settings-daemon:1954): color-plugin-WARNING **: failed to create device: failed to obtain org.freedesktop.color-manager.create-device auth

(cinnamon-settings-daemon:1954): color-plugin-WARNING **: could not find device: property match 'XRANDR_name'='eDP1' does not exist

(cinnamon-settings-daemon:1954): color-plugin-WARNING **: failed to obtain org.freedesktop.color-manager.create-profile auth
libGL error: failed to load driver: i965
libGL error: Try again with LIBGL_DEBUG=verbose for more details.
Window manager warning: Software rendering detected: Gallium 0.4 on llvmpipe (LLVM 3.3, 256 bits)

(polkit-gnome-authentication-agent-1:2175): polkit-gnome-1-WARNING **: Unable to determine the session we are in: No session for pid 2175

** (nm-applet:2174): WARNING **: Could not initialize NMClient /org/freedesktop/NetworkManager: Rejected send message, 3 matched rules; type="method_call", sender=":1.32" (uid=1717568607 pid=2174 comm="nm-applet ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination="org.freedesktop.NetworkManager" (uid=0 pid=1032 comm="NetworkManager ")
** Message: applet now removed from the notification area
      JS LOG: About to start Cinnamon
      JS LOG: ACTIVATING SOFTWARE RENDERING

** (nm-applet:2174): WARNING **: Failed to register as an agent: (32) Session not found
** Message: using fallback from indicator to GtkStatusIcon

** (nemo:2173): WARNING **: Can not get _NET_WORKAREA

** (nemo:2173): WARNING **: Can not determine workarea, guessing at layout
      JS LOG: Cinnamon started at Wed Feb 19 2014 11:24:19 GMT+0100 (CET)

(cinnamon:2161): Bluetooth-WARNING **: Could not open RFKILL control device, please verify your installation
Window manager warning: Log level 16: Could not initialize NMClient /org/freedesktop/NetworkManager: Rejected send message, 3 matched rules; type="method_call", sender=":1.36" (uid=1717568607 pid=2161 comm="cinnamon --replace ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination="org.freedesktop.NetworkManager" (uid=0 pid=1032 comm="NetworkManager ")
** Message: applet now embedded in the notification area
Window manager warning: Log level 16: _nm_remote_settings_ensure_inited: (NMRemoteSettings) error initializing: Rejected send message, 3 matched rules; type="method_call", sender=":1.36" (uid=1717568607 pid=2161 comm="cinnamon --replace ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination="org.freedesktop.NetworkManager" (uid=0 pid=1032 comm="NetworkManager ")

      JS LOG: NetworkManager is not running, hiding...
Traceback (most recent call last):
  File "/usr/lib/linuxmint/mintWelcome/mintWelcome.py", line 178, in <module>
    MintWelcome()
  File "/usr/lib/linuxmint/mintWelcome/mintWelcome.py", line 89, in __init__
    cache = apt.Cache()
  File "/usr/lib/python2.7/dist-packages/apt/cache.py", line 105, in __init__
    self.open(progress)
  File "/usr/lib/python2.7/dist-packages/apt/cache.py", line 154, in open
    self._list.read_main_list()
SystemError: E:Opening /etc/apt/sources.list.d/virtualbox.list - ifstream::ifstream (13: Permission denied)
      JS LOG: NetworkManager is not running, hiding...
PING google.com (74.125.232.97) 56(84) bytes of data.

--- google.com ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 4.964/4.964/4.964/0.000 ms
Fresh boot - logging in with a local account (that is: no problems)

Code: Select all

/etc/mdm/Xsession: Beginning session setup...
localuser:localtest being added to access control list
Script for cjkv started at run_im.
Script for default started at run_im.
Failed to connect to the VirtualBox kernel service
Failed to connect to the VirtualBox kernel service
Failed to connect to the VirtualBox kernel service
Failed to connect to the VirtualBox kernel service
Failed to connect to the VirtualBox kernel service
Script for cjkv started at run_im.
Script for default started at run_im.
GNOME_KEYRING_CONTROL=/run/user/1000/keyring-wLGnwa
SSH_AUTH_SOCK=/run/user/1000/keyring-wLGnwa/ssh
GNOME_KEYRING_CONTROL=/run/user/1000/keyring-wLGnwa
SSH_AUTH_SOCK=/run/user/1000/keyring-wLGnwa/ssh
GNOME_KEYRING_CONTROL=/run/user/1000/keyring-wLGnwa
SSH_AUTH_SOCK=/run/user/1000/keyring-wLGnwa/ssh
GNOME_KEYRING_CONTROL=/run/user/1000/keyring-wLGnwa
SSH_AUTH_SOCK=/run/user/1000/keyring-wLGnwa/ssh
GPG_AGENT_INFO=/run/user/1000/keyring-wLGnwa/gpg:0:1
      JS LOG: About to start Cinnamon
** Message: applet now removed from the notification area
** Message: using fallback from indicator to GtkStatusIcon

** (nemo:2190): WARNING **: Can not get _NET_WORKAREA

** (nemo:2190): WARNING **: Can not determine workarea, guessing at layout
      JS LOG: Cinnamon started at Wed Feb 19 2014 11:29:16 GMT+0100 (CET)
      JS LOG: network applet: Cannot find connection for active (or connection cannot be read)
** Message: applet now embedded in the notification area
      JS LOG: network applet: Found connection for active
PING google.com (74.125.232.110) 56(84) bytes of data.

--- google.com ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 1.568/1.568/1.568/0.000 ms

I might put this problem aside for a while, I'm going to install MATE alongside so people can start using the computers (gets a little urgent for some).
Top
Aqualize

Re: Cinnamon going to software rendering for some users

Post by Aqualize »

A follow up.
I made a fresh attempt with Mint 17 Qiana and some more googling. Turns out the /dev/dri/card0 devicefile uses ACL and I guess it is meant to switch over to whoever user currently is logged on (other "switched users" don't have access?). Well somehow the domain users didn't get it (don't know if ACL is unsupported here).
The basic permissions hare read&write for user root and group video. Hence I added the specific domain user who's going to use the computer to the video group in /etc/group.
Not perfect but good enough for now.
Top
PatH57

Re: <SOLVED> Cinnamon going to software rendering for some u

Post by PatH57 »

Hi,

got into this kind of problems in the early stage of switching to BPIS and found this.
http://askubuntu.com/questions/452904/l ... connect-ad
Top
Locked

Return to “Cinnamon”