skrotten wrote:Have you tried to updated the final width level 1-2 and 3 in mintupdate?
If you have don that can you tell us if all work god, i just wonder if they have fixed the bug in gnome?
skrotten wrote:Is it safe just use level 1 and 2?
I think i just update level 1 and 2 and drop 3 so i don`t get any trouble.
Thank`s for that you answered so fast and i am sorry you get trouble.
But you help`t a lot of others.
deadguy wrote:personally, I install all levels of updates 1 thru 5 including kernel updates.
this can cause problems though, so I think the mint crew only recommends levels 1 thru 3 .
btw, I have Elyssa final installed (with the newest kernel) and she's running like a champ
no problems changing wallpaper here... but I enable ubuntu backports and proposed.
I'm pretty sure this is the final, Clem just hasn't made the announcement yet...
I love it!!!
personally, I install all levels of updates 1 thru 5 including kernel updates.
Husse wrote:personally, I install all levels of updates 1 thru 5 including kernel updates.
Which may get you in trouble sooner than you think - see this topic
One computer just fine - another definitely lost wifi....
Which may be possible to get back after a lot of fiddling around
deadguy should have wrote:personally, I install all levels of updates 1 thru 5 including kernel updates but,I do so at my own risk!!
that is why Clem came up with this great tool called Mint update, so people know the risk factor involved with certain updates
sd 2:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3 < sdb5 >
sd 2:0:0:0: [sdb] Attached SCSI disk
sd 2:0:0:0: Attached scsi generic sg2 type 0
ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 16
scsi4 : sata_nv
scsi5 : sata_nv
ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 16
ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 16
ata5: SATA link down (SStatus 0 Scontrol 300)
ata6: SATA link down (SStatus 0 Scontrol 300)
Check root= bootarg cat /proc/cmdline
or missing modules, devices: cat /proc modules ls /dev
ALERT! /dev/sda2 does not exist. Dropping to a shell!
BusyBox v1.1.3 (Debian 1:1.1.3-5ubuntu12) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
Lantesh wrote:After installing Elyssa Stable [...]
CatastrophicToad wrote:Has anyone else had problems with the shutdown menu in LM5 final?
simplicissimus wrote:Why do you think that this version is the final and stable version?
Nonstopdrivel wrote:If I remove xforcevesa from the Linux Mint Compatibility Mode, I don't get the Out of Range error, but then I end up with the same nonfunctional Gnome login screen as before. I've burned a few different ISOs at very low speed; they've all given me the same problem.
I should add that with xforcevesa, the Out of Range error occurred immediately after the CUPS daemon was loaded, not after the hardware abstraction layer daemon as I stated previously.
If I could get my Dynex Wireless G USB adapter to work in Mint4, I would be content to stay there on that PC, but the documentation is so spotty that I can't seem to get anywhere with it. Even after I install the driver using Windows Wireless Drivers, the wireless connection never shows up in my Network Connections menu for me to configure. Very frustrating.
Users browsing this forum: No registered users and 1 guest