Search found 1068 matches

by ClixTrix
Thu Apr 11, 2019 1:56 pm
Forum: Hardware Support
Topic: printer HP p1102w
Replies: 8
Views: 195

Re: printer HP p1102w

Let's see if this works. Add the HPLIP-GUI utility from Software Manager (which provides HPLIP Toobox in Menu - Preference). If you got the printer to add using Printers, see if it appears in the HPLIP Toolbox (give a few seconds). If it does, there should be an "Install Requred Plugin" under Action...
by ClixTrix
Thu Apr 11, 2019 8:47 am
Forum: Printers & Scanners
Topic: Samsung M2070 AiO printer/Scanner trouble
Replies: 5
Views: 190

Re: Samsung M2070 AiO printer/Scanner trouble

ClixTrix, you are THE SAVER!!! Applying that firewall rule make my scanner FINALLY work again in LM 19.1. Thanx a lot. VICTORY!! I also just found out that TorGuard VPN service is blocking my scanner also. Any idea how to make that VPN let my scanner work again. Thanx for any help in advance. I wou...
by ClixTrix
Thu Apr 11, 2019 8:42 am
Forum: Hardware Support
Topic: printer HP p1102w
Replies: 8
Views: 195

Re: printer HP p1102w

bento wrote:
Thu Apr 11, 2019 6:12 am
Hi deepakdeshp

I can install the printer with the "Printers" application, but it still does not respond.

"Print Test Page" results in ""Filter failed".

"Print Self-test Page" does not provide any output
The P1102W requires install of the driver plugin.
by ClixTrix
Mon Apr 08, 2019 12:01 pm
Forum: Hardware Support
Topic: Updating BIOS for Lenovo YOGA 730-15IKB
Replies: 4
Views: 150

Re: Updating BIOS for Lenovo YOGA 730-15IKB

There is an interesting article on the subject of flashing a Yoga without using Windows. I haven't done this, but it does appear your model is on the list.

https://medium.com/@BladeCoder/flash-yo ... 2e455ea29c
by ClixTrix
Mon Apr 08, 2019 8:27 am
Forum: Printers & Scanners
Topic: Samsung M2070 AiO printer/Scanner trouble
Replies: 5
Views: 190

Re: Samsung M2070 AiO printer/Scanner trouble

I see a UFW rule (allow port 22161) for the printer over at Ubuntu, and it's for 18.04 (base for Mint 19). Looks like author is quoting Samsung as source for this problem and fix.

https://askubuntu.com/questions/1116233 ... rk-scanner
by ClixTrix
Sun Apr 07, 2019 9:29 am
Forum: Hardware Support
Topic: Not sure what to do with suspect disk
Replies: 7
Views: 214

Re: Not sure what to do with suspect disk

Was the Microsoft reserved partition moved after creation. I ask because of it's odd alignment and some math. Normally, partitions operate on 4K sector boundaries to optimize performance, especially on new advanced physical 4K (logical 512) sector drives. Sector 34 is the the 1st available sector fo...
by ClixTrix
Fri Apr 05, 2019 5:33 pm
Forum: Hardware Support
Topic: [Solved] System SSD No Longer Detected
Replies: 19
Views: 419

Re: System SSD No Longer Detected

Have you tried GParted? If you don't have any data on the drive, or are ready to send it to Samsung regardless, I would try using GParted to delete and recreate the Partition Table. If that works, create a new partition and format it for a test.
by ClixTrix
Fri Apr 05, 2019 10:09 am
Forum: Hardware Support
Topic: [Solved] System SSD No Longer Detected
Replies: 19
Views: 419

Re: System SSD No Longer Detected

I meant to also ask this: In many years of running Ubuntu-based systems on various machines, I have never encountered a corrupted system disk. All those were running on hard drives. Now, with my first SSD, I have a problem in the first month, bringing the system to a complete halt. Is there somethi...
by ClixTrix
Fri Apr 05, 2019 9:38 am
Forum: Printers & Scanners
Topic: HP Laser Jet Pro M12W in Mint 19.1
Replies: 4
Views: 161

Re: HP Laser Jet Pro M12W in Mint 19.1

As Brian pointed-out, the M12W isn't supported by HPLIP, and probably won't be supported. However, that printer is in the Foomatic group, i.e. it uses the foo2zjs driver, like the P1102W. http://foo2zjs.rkkda.com/ The foo2zjs driver currently bundled with Mint 19/19.1 is 20170320dfsg0-4. The changel...
by ClixTrix
Thu Apr 04, 2019 8:34 am
Forum: Printers & Scanners
Topic: HP LaserJet P1109 installation
Replies: 2
Views: 111

Re: HP LaserJet P1109 installation

Was there a specific reason for installing the newest edition of HPLIP? The P1109 works fine on the bundled version of HPLIP 3.17.10. I've got two P1102W and a (just acquired) P1109W in house, and they all work fine with Mint 19.1 and the bundled version. Here's some ideas on the error..... Since th...
by ClixTrix
Thu Apr 04, 2019 6:41 am
Forum: Printers & Scanners
Topic: <SOLVED > HP MFP stops in the middle of scan
Replies: 7
Views: 209

Re: HP MFP stops in the middle of scan

From checking specs on the MFP M177fw, you should have Ethernet and USB, as well as wifi capability. The drop-out sounds suspiciously like a wifi disconnect problem, as it appears the scanner leaves the network. Can you determine if the printer/scanner has disconnected from the router? Andy's sugges...
by ClixTrix
Tue Apr 02, 2019 4:19 pm
Forum: Printers & Scanners
Topic: <SOLVED > HP MFP stops in the middle of scan
Replies: 7
Views: 209

Re: HP MFP stops in the middle of scan

Do you have the HP Driver plugin installed? Your model is listed as requiring the plugin. Normally, the plugin is for printing. However, I've read a few cases where install of the plugin cleared-up a scan problem.

https://developers.hp.com/hp-linux-imag ... ices/index
by ClixTrix
Mon Apr 01, 2019 1:17 pm
Forum: Hardware Support
Topic: [Solved] System SSD No Longer Detected
Replies: 19
Views: 419

Re: System SSD No Longer Detected

Well, the error code suggests possible causes including Corrupt BIOS. This link suggests a reset procedure. Make sure you pull power plug when removing/swapping CMOS battery.

https://www.gillware.com/data-recovery- ... rror-0141/
by ClixTrix
Mon Apr 01, 2019 12:57 pm
Forum: Hardware Support
Topic: [Solved] System SSD No Longer Detected
Replies: 19
Views: 419

Re: System SSD No Longer Detected

Enter BIOS Setup on the Optiplex and see if it detects the SSD. Since you swapped batteries, I'd do a Setup SAVE-EXIT of BIOS as a starting point.
by ClixTrix
Mon Apr 01, 2019 10:06 am
Forum: Hardware Support
Topic: New install of mint 19.1 on HP Envy, 17" 4700MQ, 480gb SSD, 16gb RAM cd/dvd do not work.
Replies: 12
Views: 312

Re: New install of mint 19.1 on HP Envy, 17" 4700MQ, 480gb SSD, 16gb RAM cd/dvd do not work.

I'm assuming the Kingston drive was added. If you remove the Kingston drive from the system, does that restore use of the CD/DVD drive?
by ClixTrix
Fri Mar 29, 2019 11:40 am
Forum: Printers & Scanners
Topic: How to get HP LaserJet Pro scanner to work?
Replies: 9
Views: 299

Re: How to get HP LaserJet Pro scanner to work?

There is a bug report with that same scanner error code for a different HP mfp at Canonical for HPLIP.

https://bugs.launchpad.net/hplip/+bug/1803139
by ClixTrix
Fri Mar 29, 2019 11:07 am
Forum: Printers & Scanners
Topic: How to get HP LaserJet Pro scanner to work?
Replies: 9
Views: 299

Re: How to get HP LaserJet Pro scanner to work?

Generally, the plug-in is for the printer only. This list at HP provides info on which printers (or AIO) require the plugin and the M29a/w don't appear to require it.

https://developers.hp.com/hp-linux-imag ... ices/index

Are you installing to USB or network?
by ClixTrix
Fri Mar 29, 2019 8:16 am
Forum: Printers & Scanners
Topic: [SOLVED] "Broken Cache" After Failed EPSON Printer Installation
Replies: 6
Views: 203

Re: "Broken Cache" After Failed EPSON Printer Installation

It's situations like this where Timeshift comes in handy. If you're running Timeshift, do you have any Snapshots before the problem that you can restore?
by ClixTrix
Thu Mar 28, 2019 9:47 am
Forum: Printers & Scanners
Topic: [SOLVED] "Broken Cache" After Failed EPSON Printer Installation
Replies: 6
Views: 203

Re: "Broken Cache" After Failed EPSON Printer Installation

Let's talk about that package install instruction for lsb. apt-get install lsb -f That's not the correct syntax, i.e. the -f option goes before the install. In that position it operates as a package name and the "-" appended indicates uninstall. Honestly, not sure what that did, but you apparently e...
by ClixTrix
Wed Mar 27, 2019 7:48 am
Forum: Printers & Scanners
Topic: Simple scan stopped working
Replies: 9
Views: 1993

Re: Simple scan stopped working

That's a pretty old scanner. Any chance your system has both USB2 and USB3 ports and during the move you changed scanner from USB2 to USB3 port on the system? You might want to read this thread where I recently ran some tests. https://forums.linuxmint.com/viewtopic.php?f=51&t=285990&p=1583206&hilit=...

Go to advanced search