Linux Mint Forums

Set you _other_ *nix machine to print to the same Samba share that the Win machine prints too now... On the _other_ LMDE machine: 'Control Center|Print Settings|Add|Network Printer|Windows Printer via Samba' You should be able to figure out the Samba path (smb:) using the supplied example in the 'Ne...

FWIW. I installed the 'pepperflashplugin-nonfree' pkg in LM17 MATE 64-bit RC so that plugin was showing (and working) in LM 17's chromium-browser. But checking 'chrome://plugins' other installed plugins like java, VLC Multimedia Plugin, etc. were still missing. So on a LM16 MATE 64-bit machine I dow...

I know the firewall ufw is already installed. I had enabled it and just found out it was getting the way of sharing the printer with a Win XP PC. So I'd like to know if I need to run ufw. Ron With 'ufw' enabled you need to open a few ports inorder to share you printer. I'm making a few assumptions....

That did it! :D Thanks. Glad it worked for ya. One thing I should have added. If you haven't done so already, comment out with '#' at the beginning of that _old_ '/dev/sda2' line in your '/etc/fstab' file. /dev/sda2 Unknown defaults 0 0 It might cause you headaches on boot up or reboots otherwise. ...

@AlanWalker In a Terminal Window run this command: sudo blkid Add the following line to your '/etc/fstab' file using the UUID obtained from the 'blkid' command for your 'swap' partition in place of my example (xxxxxxxxxyyyyyyyyyyyyyyyzzzzzzzzzzz): UUID=xxxxxxxxxyyyyyyyyyyyyyyyzzzzzzzzzzz none swap s...

The socket url seems to work fine. still have the little red x with it sayinf idle waiting for print to finish FWIW, and If you didn't know this already, another way to check printer status from your client machine is from your browser by going to this link: http://localhost:631/ ... click on the '...

Does anyone konw a way to get driver for the Canon Multipass F60 (Multifunctional printer/scanner) I know that Canon isn't the most Linux friendly device, but I'd like to make this device working. I'm sure you have already checked at Canon's support site? I have. Just now. They offer NO SUPPORT wha...

The ip address is 192.168.2.110 . I can log into it from the browser on mint. Got it to print by changing the url to ipp://192.168.2.110/lp1 . Progress! The only thing is now when you go into printers under control center it shows up with a green check mark in the upper left hand corner of the icon...

From you first post: ... i have the url set up as ipp://192/168.2.110 ... Unless that's a typo, there's a problem. I.e., a slash between '192' and '168' where there should be a '.' [dot] ... the print server is a TP-Link TL-PS110p there documentation says it supports Linux printing. According to the...

I've got a Canon networked printer connected to my router and it uses port 9100 which is standard, but I'm having trouble adding the rule to my firewall. By default, UFW _allows_all_ outgoing traffic so you should not have to do any configuring of UFW inorder to print to your router connected print...

My Question: Why does the LMDE download site give this info: LMDE requires a deeper knowledge and experience with Linux, dpkg and APT. Debian is a less user-friendly/desktop-ready base than Ubuntu. Expect some rough edges. Actually I don't think this goes far enough. Added to the above warning shou...

Hi! Also there is no Duplex or anything under printer options and installable options is not there! Well that sucks. Also i installed hplib toolbox but there wasn't any duplex option either! I suspect that 'hplip' will be of little use to you? See here: https://www.openprinting.org/printer/HP/HP-La...

Go to Print Settings (I don't know about Cinnamon, in MATE that would be 'Menu | Control Center | Printing') and click. Right click on your printer icon, click on 'Properties'. Hopefully one of your printer options will be: 'Installable Options' ? If so, enable by ticking the box next to: 'Duplex .....

@AlanWalker Take a look at this thread: ==> http://forums.linuxmint.com/viewtopic.php?f=191&t=164748 <== which was yet another discussion of updating 'gvfs' files, but for LMDE 32-bit. The info found there can be applied to LMDE 64-bit as well. Be sure to scroll down and read the posts _AFTER_ m...

... But my LMDE operating system is 32 bit. Can anyone give me terminal instructions to download and install the packages I need? With all due respect, if you are using LMDE you should have enough clues by now to get this accomplished! (I can use Synaptic Package Manager to uninstall my current ver...

... if it is possible to allow connect to mint MATE and login to any account even if no one is logged in much the same way as you can using windows RDP. Yes. One way is to use the 'x11vnc' server that you can install using LM's package manager. See here: http://forums.linuxmint.com/viewtopic.php?f=...

Pepper-Flash won't stay installed after reboot I think 'pepper-flash' is still installed after reboot. The issue probably is that the '/etc/chromium-browser/default' file is being overwritten which removes the essential '. /usr/lib/pepflashplugin-installer/pepflashplayer.sh' line which you added pr...

... I checked the version number of OpenSSL in the command line, it gave me the following output indicating that my version was still one of the ones that is considered vulnerable. Just wondering. What command at the commandline did you use to get the 'openssl' version, 'built on, platform, options...

I'm running LM 16 as the solo bootup system on my laptop. For months my Brother HL-2270 laser has printed fine, does duplex even, but last week it suddenly is no longer printing landscape. The program used doesn't matter, the result is the same. I don't have a solution for you but I recently tried ...

Caveate. I'm running 'Bitvise SSH Server' on a Win7 machine, not cygwin. Never tried using 'sshfs' to a Windows machine until just now. host machine: 'uranus' (Win7) client(s): I tried this successfully from both a physical machine (triton) running LM16 MATE 64-bit -and- also successfull on a Virtua...