How to upgrade to Linux Mint 19
Forum rules
Section reserved for the team. You can reply to announcements here but not post new topics. Do not add support questions to threads here, use the appropriate support forum instead.
Section reserved for the team. You can reply to announcements here but not post new topics. Do not add support questions to threads here, use the appropriate support forum instead.
Re: How to upgrade to Linux Mint 19
Clem and all other developers - what a magnificent piece of work Linux Mint 19! I did have some difficulties installing it, but actually minor hiccups. As far as I can see, the installation failures were caused by the changes in the good old grub. To be able to work in now needs a small separate partition for the bootloader. Having created the bootloader partiion, which is named "Reserved BIOS boot area" I needed to try several file systems - ext4 worked. This was on my "vdesk" main pc, which now has linux only.
I then tested the installation on an older laptop. I tried the "format the whole disk" option. The "auto" partitioning leaves a partiton for the efi, but no partition for the bootloader. It worked fine in older grub setup, but not now. I tried the mint 18.3 and that worked fine. All that is needed is a revision of the partitioning with a provision of a small partition for the boot loader.
Hope this little experiment will be helpful.
I would be happy and willing to do more testing, if requested. Should I write a message in the bug tracker?
OldAl.
I then tested the installation on an older laptop. I tried the "format the whole disk" option. The "auto" partitioning leaves a partiton for the efi, but no partition for the bootloader. It worked fine in older grub setup, but not now. I tried the mint 18.3 and that worked fine. All that is needed is a revision of the partitioning with a provision of a small partition for the boot loader.
Hope this little experiment will be helpful.
I would be happy and willing to do more testing, if requested. Should I write a message in the bug tracker?
OldAl.
Re: How to upgrade to Linux Mint 19
Hello!
I'm running Mint 17.3 Mate 64bit.
I've done backup, and created snapshot with timeshift.
What is the safest way of upgrading to Mint 19 Mate? Do I have to upgrade to Mint 18.3 first? If yes, where is this instruction?
I'm running Mint 17.3 Mate 64bit.
I've done backup, and created snapshot with timeshift.
What is the safest way of upgrading to Mint 19 Mate? Do I have to upgrade to Mint 18.3 first? If yes, where is this instruction?
Re: How to upgrade to Linux Mint 19
Great work Mint Team. It works perfectly!!
Thanks to the entire Mint Team for this issue-free update
Thanks to the entire Mint Team for this issue-free update
- AZgl1800
- Level 20
- Posts: 11184
- Joined: Thu Dec 31, 2015 3:20 am
- Location: Oklahoma where the wind comes Sweeping down the Plains
- Contact:
Re: How to upgrade to Linux Mint 19
you can't upgrade to 19 from 17, just do a fresh install, and you will like it better.
Re: How to upgrade to Linux Mint 19
If you have a UEFI computer the /efi is the bootloader partition. I have it on both my UEFI systems and I multiboot many distros on each.
LM21.1 KDE/LM21.1 Cin/ UEFI Tuf Gaming X570 Plus, Ryzen 7 5800X, GTX 3060, Samsung 980 Pro M.2 NVMe
LM21.1 KDE/LM21.1 Cin/ UEFI on STRIX laptop, i7700 HQ, GTX 1060, Samsung 980 Pro M.2 NVMe
LM21.1 KDE/LM21.1 Cin/ UEFI on STRIX laptop, i7700 HQ, GTX 1060, Samsung 980 Pro M.2 NVMe
Re: How to upgrade to Linux Mint 19
I tried on two Laptops the above commands and this is what I got
HP Laptop
And our ASUS Laptop
Both of these Laptops reside on the Hard Drive, the HP Laptop has Windows 8, and the ASUS Laptop has Windows 10, both have Linux mint 18.3 Cinnamon on them.
HP Laptop
Code: Select all
sudo apt update
[sudo] password for dave:
Ign:1 http://mirror.csclub.uwaterloo.ca/linuxmint-packages sylvia InRelease
Get:2 http://archive.canonical.com/ubuntu xenial InRelease [11.5 kB]
Get:3 http://mirror.csclub.uwaterloo.ca/linuxmint-packages sylvia Release [24.2 kB]
Get:4 http://mirror.csclub.uwaterloo.ca/linuxmint-packages sylvia Release.gpg [819 B]
Get:5 http://archive.ubuntu.com/ubuntu xenial InRelease [247 kB]
Get:6 http://security.ubuntu.com/ubuntu xenial-security InRelease [107 kB]
Get:7 http://archive.canonical.com/ubuntu xenial/partner i386 Packages [3,116 B]
Get:8 http://archive.canonical.com/ubuntu xenial/partner Translation-en [1,616 B]
Get:9 http://mirror.csclub.uwaterloo.ca/linuxmint-packages sylvia/main i386 Packages [17.9 kB]
Get:10 http://archive.ubuntu.com/ubuntu xenial-updates InRelease [109 kB]
Get:11 http://mirror.csclub.uwaterloo.ca/linuxmint-packages sylvia/upstream i386 Packages [45.0 kB]
Get:12 http://mirror.csclub.uwaterloo.ca/linuxmint-packages sylvia/import i386 Packages [13.4 kB]
Get:13 http://mirror.csclub.uwaterloo.ca/linuxmint-packages sylvia/backport i386 Packages [74.2 kB]
Get:14 http://archive.ubuntu.com/ubuntu xenial-backports InRelease [107 kB]
Get:15 http://security.ubuntu.com/ubuntu xenial-security/main i386 Packages [469 kB]
Get:16 http://archive.ubuntu.com/ubuntu xenial/main i386 Packages [1,196 kB]
Get:17 http://security.ubuntu.com/ubuntu xenial-security/main Translation-en [228 kB]
Get:18 http://security.ubuntu.com/ubuntu xenial-security/restricted i386 Packages [7,224 B]
Get:19 http://security.ubuntu.com/ubuntu xenial-security/restricted Translation-en [2,152 B]
Get:20 http://security.ubuntu.com/ubuntu xenial-security/universe i386 Packages [311 kB]
Get:21 http://security.ubuntu.com/ubuntu xenial-security/universe Translation-en [137 kB]
Get:22 http://security.ubuntu.com/ubuntu xenial-security/multiverse i386 Packages [3,628 B]
Get:23 http://security.ubuntu.com/ubuntu xenial-security/multiverse Translation-en [1,744 B]
Get:24 http://archive.ubuntu.com/ubuntu xenial/main Translation-en [568 kB]
Get:25 http://archive.ubuntu.com/ubuntu xenial/restricted i386 Packages [8,684 B]
Get:26 http://archive.ubuntu.com/ubuntu xenial/restricted Translation-en [2,908 B]
Get:27 http://archive.ubuntu.com/ubuntu xenial/universe i386 Packages [7,512 kB]
Get:28 http://archive.ubuntu.com/ubuntu xenial/universe Translation-en [4,354 kB]
Get:29 http://archive.ubuntu.com/ubuntu xenial/multiverse i386 Packages [140 kB]
Get:30 http://archive.ubuntu.com/ubuntu xenial/multiverse Translation-en [106 kB]
Get:31 http://archive.ubuntu.com/ubuntu xenial-updates/main i386 Packages [750 kB]
Get:32 http://archive.ubuntu.com/ubuntu xenial-updates/main Translation-en [339 kB]
Get:33 http://archive.ubuntu.com/ubuntu xenial-updates/restricted i386 Packages [7,524 B]
Get:34 http://archive.ubuntu.com/ubuntu xenial-updates/restricted Translation-en [2,272 B]
Get:35 http://archive.ubuntu.com/ubuntu xenial-updates/universe i386 Packages [619 kB]
Get:36 http://archive.ubuntu.com/ubuntu xenial-updates/universe Translation-en [273 kB]
Get:37 http://archive.ubuntu.com/ubuntu xenial-updates/multiverse i386 Packages [15.5 kB]
Get:38 http://archive.ubuntu.com/ubuntu xenial-updates/multiverse Translation-en [8,344 B]
Get:39 http://archive.ubuntu.com/ubuntu xenial-backports/main i386 Packages [6,752 B]
Get:40 http://archive.ubuntu.com/ubuntu xenial-backports/main Translation-en [4,180 B]
Get:41 http://archive.ubuntu.com/ubuntu xenial-backports/universe i386 Packages [7,104 B]
Get:42 http://archive.ubuntu.com/ubuntu xenial-backports/universe Translation-en [3,996 B]
Fetched 17.8 MB in 9s (1,922 kB/s)
Reading package lists... Done
Building dependency tree
Reading state information... Done
126 packages can be upgraded. Run 'apt list --upgradable' to see them.
dave@Laptop ~ $ apt install mintupgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed:
mintupgrade
0 upgraded, 1 newly installed, 0 to remove and 126 not upgraded.
Need to get 6,980 B of archives.
After this operation, 29.7 kB of additional disk space will be used.
Get:1 http://mirror.csclub.uwaterloo.ca/linuxmint-packages sylvia/main i386 mintupgrade all 18.3.11 [6,980 B]
Fetched 6,980 B in 0s (56.3 kB/s)
Selecting previously unselected package mintupgrade.
(Reading database ... 439723 files and directories currently installed.)
Preparing to unpack .../mintupgrade_18.3.11_all.deb ...
Unpacking mintupgrade (18.3.11) ...
Setting up mintupgrade (18.3.11) ...
Code: Select all
sudo apt update
[sudo] password for dave:
Ign:1 http://mirror.csclub.uwaterloo.ca/linuxmint-packages sylvia InRelease
Hit:2 http://mirror.csclub.uwaterloo.ca/linuxmint-packages sylvia Release
Hit:3 http://archive.ubuntu.com/ubuntu xenial InRelease
Get:4 http://archive.ubuntu.com/ubuntu xenial-updates InRelease [109 kB]
Get:5 http://security.ubuntu.com/ubuntu xenial-security InRelease [107 kB]
Hit:6 http://archive.canonical.com/ubuntu xenial InRelease
Hit:7 http://ppa.launchpad.net/team-xbmc/ppa/ubuntu xenial InRelease
Hit:8 http://ppa.launchpad.net/team-xbmc/xbmc-nightly/ubuntu xenial InRelease
Get:9 http://archive.ubuntu.com/ubuntu xenial-backports InRelease [107 kB]
Get:11 http://security.ubuntu.com/ubuntu xenial-security/main amd64 Packages [533 kB]
Get:12 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 Packages [824 kB]
Get:13 http://security.ubuntu.com/ubuntu xenial-security/main i386 Packages [469 kB]
Get:14 http://security.ubuntu.com/ubuntu xenial-security/main Translation-en [228 kB]
Get:15 http://security.ubuntu.com/ubuntu xenial-security/universe amd64 Packages [365 kB]
Get:16 http://archive.ubuntu.com/ubuntu xenial-updates/main i386 Packages [750 kB]
Get:17 http://security.ubuntu.com/ubuntu xenial-security/universe i386 Packages [311 kB]
Get:18 http://security.ubuntu.com/ubuntu xenial-security/universe Translation-en [137 kB]
Get:19 http://archive.ubuntu.com/ubuntu xenial-updates/main Translation-en [339 kB]
Get:20 http://archive.ubuntu.com/ubuntu xenial-updates/universe amd64 Packages [679 kB]
Get:21 http://archive.ubuntu.com/ubuntu xenial-updates/universe i386 Packages [619 kB]
Get:22 http://archive.ubuntu.com/ubuntu xenial-updates/universe Translation-en [273 kB]
Get:23 http://archive.ubuntu.com/ubuntu xenial-backports/main amd64 Packages [6,756 B]
Get:24 http://archive.ubuntu.com/ubuntu xenial-backports/main i386 Packages [6,752 B]
Fetched 5,864 kB in 6s (919 kB/s)
Reading package lists... Done
Building dependency tree
Reading state information... Done
14 packages can be upgraded. Run 'apt list --upgradable' to see them.
dave@TV-Computer ~ $ apt install mintupgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed:
mintupgrade
0 upgraded, 1 newly installed, 0 to remove and 14 not upgraded.
Need to get 6,980 B of archives.
After this operation, 29.7 kB of additional disk space will be used.
Get:1 http://mirror.csclub.uwaterloo.ca/linuxmint-packages sylvia/main amd64 mintupgrade all 18.3.11 [6,980 B]
Fetched 6,980 B in 0s (76.7 kB/s)
Selecting previously unselected package mintupgrade.
(Reading database ... 837521 files and directories currently installed.)
Preparing to unpack .../mintupgrade_18.3.11_all.deb ...
Unpacking mintupgrade (18.3.11) ...
Setting up mintupgrade (18.3.11) ...
Last edited by Moem on Tue Aug 07, 2018 6:41 pm, edited 1 time in total.
Reason: Swapped the quote tags out for code tags; the code tags retain some formatting that make your output easier to read.
Reason: Swapped the quote tags out for code tags; the code tags retain some formatting that make your output easier to read.
[b]I love Linux Mint 21.1 Vanessa Cinnamon[/b]
Using Linux Mint since 2007, not programming smart, last program language I learned was called Basic on a Commodore 64
Using Linux Mint since 2007, not programming smart, last program language I learned was called Basic on a Commodore 64
Re: How to upgrade to Linux Mint 19
Please start a new thread for your question, this is the Releases & Announcements forum section.
If your issue is solved, kindly indicate that by editing the first post in the topic, and adding [SOLVED] to the title. Thanks!
Re: How to upgrade to Linux Mint 19
@Moem- I followed the directions at the beginning of this thread and it did not upgrade to LM19, as you can see from my post!
So do tell me how I upgrade from 18.3 to LM19 through the Terminal.
So do tell me how I upgrade from 18.3 to LM19 through the Terminal.
[b]I love Linux Mint 21.1 Vanessa Cinnamon[/b]
Using Linux Mint since 2007, not programming smart, last program language I learned was called Basic on a Commodore 64
Using Linux Mint since 2007, not programming smart, last program language I learned was called Basic on a Commodore 64
Re: How to upgrade to Linux Mint 19
Go here. You've made it to D3. There's still more work to do.
Re: How to upgrade to Linux Mint 19
Yea! I added /Storage/*** to the exclude Patterns Filter list & now it's working. Sorry about the length of time before replying, one day a couple of weeks ago I woke up & my body decided I needed a Pacemaker. Who Knew??? Just now got around to trying it.gm10 wrote: ⤴Mon Jul 16, 2018 5:57 pmSounds like you didn't create a filter to exclude your 1 TB HD from the backups, so timeshift would basically create snapshots of the snapshots as well and thus exponentially grow the snapshot sizes. Correctly configured all the timeshift snapshots combined take up little more space than the space used on your root partition.SantaFe wrote: ⤴Mon Jul 16, 2018 5:11 pm I'm not a fan. I tried setting it up to do 1 monthly backup & had it store it on my freshly formatted 1 terabyte HD. Started it & HD light never went off, even after 4 hours. Now it was backing up my 480 GB NVME which only had 80 gigs used, but when I looked at the backup storage drive it was down to around 500 gigs left. I'll stick with Clonezilla thank you.
Again, thanks for the help.
-
- Level 1
- Posts: 17
- Joined: Sun Aug 07, 2016 1:32 pm
- Location: La Porte, Texas
Re: How to upgrade to Linux Mint 19
Upgrade successful, thanks Clem. Went from 17.3 to 19.
Minor issue with disabling the login & lock lid.
Still trying to resolve.
Minor issue with disabling the login & lock lid.
Still trying to resolve.
Linux Mint 19.2 "Tina" - Cinnamon (64-bit)
Re: How to upgrade to Linux Mint 19 <SOLVED>
I wish that my "update" from 18.3 Cinnamon to 19.0 Cinnamon had gone as smoothly as yours. I spent over a week on several issues, including ownership problems, and the inability to install network printers through normal procedures (procedures that worked in 18.3).curtvaughan wrote: ⤴Wed Jul 04, 2018 2:39 pm Thanks to the Mint team for an issue-free update from 18.3 Cinnamon to 19 Cinnamon....
Here is a sample with output when attempting to execute gparted:
...
Unit -.mount does not exist, proceeding anyway.
[I didn't "upgrade" via the procedure given in the release documentation, because it seemed far to complicated. Instead, I did a clean install, retaining my home partition and all the settings contained therein, and re-doing the various settings that are contained in the root partition.]
I'm getting the "Unit -.mount does not exist, proceeding anyway." message when gparted is started from a terminal under Linux Mint 19. It doesn't prevent gparted from starting, and it doesn't seem to cause any other problems in gparted's functioning. Note that Mint 18.3 displayed "too few arguments" when "gparted /dev/xxx" was started from the terminal, so this is a change in bugs, but not any worse than before. From the Ubuntu forums, it seems that the "Unit" message is occurring in other Ubuntu 18.04 distributions, along with problems in starting gparted.
Re: How to upgrade to Linux Mint 19
Only one fly-in-the-ointment with the upgrade from 18.3 to 19.0, I did not have the locales-all package installed prior to running the mintupgrade command. The installation process complained about not being able to set the locales LC_ALL variable. As a consequence, the dbus-x11 package would not install and the upgrade process halted.
So, word of advice, if your system lacks the locales-all package, install it prior to attempting the upgrade.
If you happen to be in the middle of the upgrade and it halts with errors because of the locales, simply install the locales-all package and then the dbus-x11 package. The apt command will finish the installation of queued up packages. Once all of the installation activity has settled down, simply restart the mintupgrade command.
So, word of advice, if your system lacks the locales-all package, install it prior to attempting the upgrade.
If you happen to be in the middle of the upgrade and it halts with errors because of the locales, simply install the locales-all package and then the dbus-x11 package. The apt command will finish the installation of queued up packages. Once all of the installation activity has settled down, simply restart the mintupgrade command.
Linux Mint 21.1 Cinnamon
Re: How to upgrade to Linux Mint 19
I have to admit, I find the timesheet requirement in mintupgrade to be annoying.gm10 wrote: ⤴Wed Jul 04, 2018 7:21 amTimeshift is only there to allow you to roll the upgrade back in case something goes wrong. You can skip the timeshift step if you want to take the risk, but with you saying that a fresh install not being an option I'd be very careful with that decision.
Note that timeshift can also backup to an USB stick (once formatted as ext4).
We are Linux users. We don't need to be nannied. Leave that shit for Windows.
I usually do a full disk image to my NAS before I upgrade anyway, so the timeshift requirement is an annoyance. I don't even have timeshift installed, as I find the fact that it can't backup to remote filesystems makes it completely useless.
Now, I'm told I can touch /etc/timeshift.json to override this requirement, but my system doesn't even have that file....
Maybe I'll just do a manual upgrade by manually changing the repositories and doing a dist-upgrade. That ought to do it, right?
Corsair 1000D, Threadripper 3960x, Asus ROG Zenith II, 64GB, Samsung 990 Pro, Geforce RTX 4090, 42" LG C3, 2x Dell U2412M, Schiit Bifrost Multibit DAC
Server: AMD EPYC 7543(32C/64T), SuperMicro H12SSL-NT, 512GB RAM, 192TB ZFS
Server: AMD EPYC 7543(32C/64T), SuperMicro H12SSL-NT, 512GB RAM, 192TB ZFS
Re: How to upgrade to Linux Mint 19
Case in point, the touch command creates a non-existent file, that's why you were told to use it. You were saying?
I probably would have made it optional, too, had I created the upgrade script, but I can see why they opted for a little bit of forced hand-holding instead; better safe than sorry.
Re: How to upgrade to Linux Mint 19
Interesting. I've used it many times to update access and modification times, I never realized it created the file if it wasn't there :pgm10 wrote: ⤴Fri Nov 09, 2018 11:54 amCase in point, the touch command creates a non-existent file, that's why you were told to use it. You were saying?
I probably would have made it optional, too, had I created the upgrade script, but I can see why they opted for a little bit of forced hand-holding instead; better safe than sorry.
Corsair 1000D, Threadripper 3960x, Asus ROG Zenith II, 64GB, Samsung 990 Pro, Geforce RTX 4090, 42" LG C3, 2x Dell U2412M, Schiit Bifrost Multibit DAC
Server: AMD EPYC 7543(32C/64T), SuperMicro H12SSL-NT, 512GB RAM, 192TB ZFS
Server: AMD EPYC 7543(32C/64T), SuperMicro H12SSL-NT, 512GB RAM, 192TB ZFS