Hello Karl,
thank you for your answer.
Here are the results:
Code: Select all
$ lsb_release -rd
Description: Linux Mint 12 LXDE
Release: 12
Code: Select all
$ inxi -Fxz
System: Host: XXX-A5020 Kernel: 3.2.0-60-generic i686 (32 bit, gcc: 4.6.3)
Desktop: LXDE (Openbox 3.5.0) Distro: Linux Mint 12 LXDE
Machine: System: Acer (portable) product: Aspire 5020 version: -1
Mobo: Acer model: Aspire 5020 version: Rev.A Bios: Phoenix version: V1.13 date: 09/09/2005
CPU: Single core AMD Turion 64 Mobile ML-30 (-UP-) cache: 1024 KB flags: (lm nx sse sse2 sse3) bmips: 1600.01 clocked at 800.00 MHz
Graphics: Card: Advanced Micro Devices [AMD/ATI] RV410/M26 [Mobility Radeon X700] bus-ID: 01:00.0
X.Org: 1.11.3 drivers: ati,radeon (unloaded: fbdev,vesa) Resolution: 1280x800@60.1hz
GLX Renderer: Gallium 0.4 on ATI RV410 GLX Version: 2.1 Mesa 8.0.4 Direct Rendering: Yes
Audio: Card: Advanced Micro Devices [AMD/ATI] IXP SB400 AC'97 Audio Controller driver: snd_atiixp bus-ID: 00:14.5
Sound: Advanced Linux Sound Architecture ver: 1.0.24
Network: Card-1: Broadcom BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller driver: b43-pci-bridge bus-ID: 06:05.0
IF: wlan0 state: down mac: <filter>
Card-2: Realtek RTL8169 PCI Gigabit Ethernet Controller driver: r8169 ver: 2.3LK-NAPI port: a000 bus-ID: 06:07.0
IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 164.0GB (4.1% used) 1: /dev/sda SAMSUNG_HM160HC 160.0GB
2: USB /dev/sdb Cruzer_Edge 4.0GB
Partition: ID: / size: 11G used: 3.9G (38%) fs: ext4 ID: /boot size: 461M used: 55M (13%) fs: ext4
ID: /home size: 24G used: 381M (2%) fs: ext4 ID: swap-1 size: 2.00GB used: 0.00GB (0%) fs: swap
Sensors: Error: You do not have the sensors app installed.
Info: Processes: 132 Uptime: 3 min Memory: 148.8/1000.2MB Runlevel: 2 Gcc sys: 4.6.3 Client: Shell inxi: 1.7.33
It seems to be stuck to 12 LXDE, but with Mint 13's kernel.
what I did:
- sudo apt-get purge mint-search-addon
- opened /etc/apt/sources.list file, replaced "lisa" with "maya" and "oneiric" with "precise", commented LXDE specific repo and medibuntu (cause errors)
- sudo apt-get update
- sudo apt-get upgrade
- sudo apt-get dist-upgrade
- sudo apt-get update
- sudo apt-get install mint-meta-core
and rebooted.
also tried the upgrades with -f option. No error, it only said that the package mint-artwork-gnome had not been updated.
Thank you.