I have attached showing I can support 1000 and my router and modem can also support 1000 and have until recently... Any help?
Settings for enp2s0:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
MDI-X: Unknown
Cannot get wake-on-lan settings: Operation not permitted
Current message level: 0x000060e4 (24804)
link ifup rx_err tx_err hw wol
Link detected: yes
[Solved] My wired Ethernet only runs at 100 when it can run 1000
Forum rules
Before you post please read how to get help
Before you post please read how to get help
-
- Level 12
- Posts: 4272
- Joined: Sun Aug 09, 2015 10:00 am
Re: [Solved] My wired Ethernet only runs at 100 when it can run 1000
What was the solution? Kudos to find it yourself.
If I have helped you solve a problem, please add [SOLVED] to your first post title, it helps other users looking for help, and keeps the forum clean.
I am using Mint 19.1 Cinnamon 64 bit with AMD A8/7410 processor . Memory 8GB
I am using Mint 19.1 Cinnamon 64 bit with AMD A8/7410 processor . Memory 8GB
Re: [Solved] My wired Ethernet only runs at 100 when it can run 1000
It had just negotiated a slower connection. I had to re-boot both the router and the computer for it to correct itself.