I used the following process to update my network driver.
https://github.com/koljah-de/e1000e-dkm ... /tag/3.8.4
I was able to succesffuly update the driver but I am getting this error.
$ dmesg | grep e1000e
[ 1.259210] e1000e: loading out-of-tree module taints kernel.
[ 1.270963] e1000e: module verification failed: signature and/or required key missing - tainting kernel
[ 1.272637] e1000e: Intel(R) PRO/1000 Network Driver - 3.8.4-NAPI
[ 1.272637] e1000e: Copyright(c) 1999 - 2020 Intel Corporation.
[ 1.274033] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.368541] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[ 1.452371] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 18:db:f2:55:f9:6b
[ 1.452372] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[ 1.452455] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
[ 1.453314] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
[ 25.418348] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 25.418351] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 26.217252] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
[ 27.956536] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 27.956540] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 28.765213] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
[ 30.758549] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 30.758551] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 31.573315] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
[ 44.279560] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 44.279562] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 45.041075] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
Updating the Intel Network Driver
Forum rules
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Updating the Intel Network Driver
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 1 time in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
- Pjotr
- Level 24
- Posts: 20141
- Joined: Mon Mar 07, 2011 10:18 am
- Location: The Netherlands (Holland) 🇳🇱
- Contact:
Re: Updating the Intel Network Driver
If need be, first establish temporary internet connection for your computer by means of your cell phone.
Please generate an overview of your system like this:
- Launch a terminal window (this is how to launch a terminal window);
- Make the terminal window full screen, to avoid chopped lines;
- Copy/paste this command into the terminal:
(if you type: the letter F is a capital letter, and don't omit the space after inxi!)
Press Enter.
Copy/paste the output in your next message.
Please generate an overview of your system like this:
- Launch a terminal window (this is how to launch a terminal window);
- Make the terminal window full screen, to avoid chopped lines;
- Copy/paste this command into the terminal:
Code: Select all
inxi -Fxpmrz
Press Enter.
Copy/paste the output in your next message.
Tip: 10 things to do after installing Linux Mint 21.3 Virginia
Keep your Linux Mint healthy: Avoid these 10 fatal mistakes
Twitter: twitter.com/easylinuxtips
All in all, horse sense simply makes sense.
Keep your Linux Mint healthy: Avoid these 10 fatal mistakes
Twitter: twitter.com/easylinuxtips
All in all, horse sense simply makes sense.
Re: Updating the Intel Network Driver
Code: Select all
System: Kernel: 5.4.0-67-generic x86_64 bits: 64 compiler: gcc v: 9.3.0 Desktop: Cinnamon 4.8.6
Distro: Linux Mint 20.1 Ulyssa base: Ubuntu 20.04 focal
Machine: Type: Laptop System: Dell product: Latitude E7470 v: N/A serial: <filter>
Mobo: Dell model: 0T6HHJ v: A00 serial: <filter> UEFI [Legacy]: Dell v: 1.27.3 date: 01/07/2021
Battery: ID-1: BAT0 charge: 42.6 Wh condition: 53.0/55.0 Wh (96%) model: Samsung SDI DELL 1W2Y26B status: Discharging
Memory: RAM: total: 7.59 GiB used: 5.75 GiB (75.8%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU: Topology: Dual Core model: Intel Core i5-6300U bits: 64 type: MT MCP arch: Skylake rev: 3 L2 cache: 3072 KiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 19999
Speed: 2733 MHz min/max: 400/3000 MHz Core speeds (MHz): 1: 2733 2: 2728 3: 2725 4: 2726
Graphics: Device-1: Intel Skylake GT2 [HD Graphics 520] vendor: Dell Latitude E7470 driver: i915 v: kernel bus ID: 00:02.0
Display: x11 server: X.Org 1.20.9 driver: modesetting unloaded: fbdev,vesa resolution: 2048x1152~60Hz
OpenGL: renderer: Mesa Intel HD Graphics 520 (SKL GT2) v: 4.6 Mesa 20.2.6 direct render: Yes
Audio: Device-1: Intel Sunrise Point-LP HD Audio vendor: Dell Latitude E7470 driver: snd_hda_intel v: kernel
bus ID: 00:1f.3
Sound Server: ALSA v: k5.4.0-67-generic
Network: Device-1: Intel Ethernet I219-LM vendor: Dell Latitude E7470 driver: e1000e v: 3.8.4-NAPI port: f040
bus ID: 00:1f.6
IF: enp0s31f6 state: down mac: <filter>
Device-2: Intel Wireless 8260 driver: iwlwifi v: kernel port: f040 bus ID: 01:00.0
IF: wlp1s0 state: up mac: <filter>
IF-ID-1: virbr0 state: up speed: N/A duplex: N/A mac: <filter>
IF-ID-2: virbr0-nic state: down mac: <filter>
IF-ID-3: vnet0 state: unknown speed: 10 Mbps duplex: full mac: <filter>
Drives: Local Storage: total: 238.47 GiB used: 53.55 GiB (22.5%)
ID-1: /dev/sda vendor: SanDisk model: X400 M.2 2280 256GB size: 238.47 GiB
Partition: ID-1: / size: 233.24 GiB used: 53.55 GiB (23.0%) fs: ext4 dev: /dev/sda5
ID-2: /boot/efi size: 511.0 MiB used: 4 KiB (0.0%) fs: vfat dev: /dev/sda1
Sensors: System Temperatures: cpu: 48.0 C mobo: N/A
Fan Speeds (RPM): cpu: 3315
Repos: No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list
1: deb [arch=amd64] https://brave-browser-apt-release.s3.brave.com/ stable main
Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
1: deb http://packages.linuxmint.com ulyssa main upstream import backport #id:linuxmint_main
2: deb http://archive.ubuntu.com/ubuntu focal main restricted universe multiverse
3: deb http://archive.ubuntu.com/ubuntu focal-updates main restricted universe multiverse
4: deb http://archive.ubuntu.com/ubuntu focal-backports main restricted universe multiverse
5: deb http://security.ubuntu.com/ubuntu/ focal-security main restricted universe multiverse
6: deb http://archive.canonical.com/ubuntu/ focal partner
Active apt repos in: /etc/apt/sources.list.d/teamviewer.list
1: deb https://linux.teamviewer.com/deb stable main
Re: Updating the Intel Network Driver
If I may ask, was there something wrong with the previous network driver? If not, I'd try a Timeshift restore to bring you back to a previous point.
Re: Updating the Intel Network Driver
The old driver did not work.. I was not able to get wired network. I am able to get wifi.
It would say connecting and than unplugged.
It would say connecting and than unplugged.
- Pjotr
- Level 24
- Posts: 20141
- Joined: Mon Mar 07, 2011 10:18 am
- Location: The Netherlands (Holland) 🇳🇱
- Contact:
Re: Updating the Intel Network Driver
Try this:
Update Manager - panel: View - Linux kernels
Install the latest kernel of the 5.8 series. Then reboot.
Update Manager - panel: View - Linux kernels
Install the latest kernel of the 5.8 series. Then reboot.
Tip: 10 things to do after installing Linux Mint 21.3 Virginia
Keep your Linux Mint healthy: Avoid these 10 fatal mistakes
Twitter: twitter.com/easylinuxtips
All in all, horse sense simply makes sense.
Keep your Linux Mint healthy: Avoid these 10 fatal mistakes
Twitter: twitter.com/easylinuxtips
All in all, horse sense simply makes sense.
Re: Updating the Intel Network Driver
I updated the kernal but the driver for the network fell back to the older version. However it still wont work.
Now when I try to update the driver I get the following:
$ sudo dpkg -i e1000e-dkms_3.8.4_all.deb
(Reading database ... 443135 files and directories currently installed.)
Preparing to unpack e1000e-dkms_3.8.4_all.deb ...
------------------------------
Deleting module version: 3.8.4
completely from the DKMS tree.
------------------------------
Done.
Unpacking e1000e-dkms (3.8.4) over (3.8.4) ...
Setting up e1000e-dkms (3.8.4) ...
Loading new e1000e-3.8.4 DKMS files...
Building for 5.8.0-45-generic
Building for architecture amd64
Building initial module for 5.8.0-45-generic
Error! Bad return status for module build on kernel: 5.8.0-45-generic (amd64)
Consult /var/lib/dkms/e1000e/3.8.4/build/make.log for more information.
dpkg: error processing package e1000e-dkms (--install):
installed e1000e-dkms package post-installation script subprocess returned error exit status 10
Errors were encountered while processing:
e1000e-dkms
---------------
Error Log
dmesg | grep e1000e
[ 1.112618] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.112619] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.117621] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.205285] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[ 1.277365] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 18:db:f2:55:f9:6b
[ 1.277370] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[ 1.277457] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
[ 1.305933] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
[ 56.467337] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 56.467342] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 57.286235] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
[ 73.060422] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 73.060427] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 73.850118] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
[ 103.030544] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 103.030549] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 103.832624] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
[ 105.539979] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 105.539992] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 106.331040] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
[ 108.054384] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 108.054389] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 108.881558] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
[ 176.992560] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 176.992568] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 177.816098] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
[ 179.522521] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 179.522528] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 180.316217] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
[ 182.112546] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 182.112554] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 182.928163] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
[ 209.689886] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 209.689895] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 210.489312] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
[ 212.195445] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 212.195454] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 213.028896] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
[ 214.853905] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 214.853907] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 215.648520] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
[ 228.487737] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 228.487744] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 229.250079] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
System
System: Kernel: 5.8.0-45-generic x86_64 bits: 64 compiler: N/A Desktop: Cinnamon 4.8.6
wm: muffin dm: LightDM Distro: Linux Mint 20.1 Ulyssa base: Ubuntu 20.04 focal
Machine: Type: Laptop System: Dell product: Latitude E7470 v: N/A serial: <filter> Chassis:
type: 9 serial: <filter>
Mobo: Dell model: 0T6HHJ v: A00 serial: <filter> UEFI [Legacy]: Dell v: 1.27.3
date: 01/07/2021
Battery: ID-1: BAT0 charge: 9.7 Wh condition: 51.1/55.0 Wh (93%) volts: 7.9/7.6
model: Samsung SDI DELL 1W2Y26B serial: <filter> status: Charging
CPU: Topology: Dual Core model: Intel Core i5-6300U bits: 64 type: MT MCP arch: Skylake
rev: 3 L2 cache: 3072 KiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 19999
Speed: 702 MHz min/max: 400/3000 MHz Core speeds (MHz): 1: 751 2: 723 3: 704 4: 718
Graphics: Device-1: Intel Skylake GT2 [HD Graphics 520] vendor: Dell Latitude E7470 driver: i915
v: kernel bus ID: 00:02.0 chip ID: 8086:1916
Display: x11 server: X.Org 1.20.9 driver: modesetting unloaded: fbdev,vesa
resolution: 2048x1152~60Hz
OpenGL: renderer: Mesa Intel HD Graphics 520 (SKL GT2) v: 4.6 Mesa 20.2.6
direct render: Yes
Audio: Device-1: Intel Sunrise Point-LP HD Audio vendor: Dell Latitude E7470
driver: snd_hda_intel v: kernel bus ID: 00:1f.3 chip ID: 8086:9d70
Sound Server: ALSA v: k5.8.0-45-generic
Network: Device-1: Intel Ethernet I219-LM vendor: Dell Latitude E7470 driver: e1000e v: 3.2.6-k
port: f040 bus ID: 00:1f.6 chip ID: 8086:156f
IF: enp0s31f6 state: down mac: <filter>
Device-2: Intel Wireless 8260 driver: iwlwifi v: kernel port: f040 bus ID: 01:00.0
chip ID: 8086:24f3
IF: wlp1s0 state: up mac: <filter>
IF-ID-1: virbr0 state: down mac: <filter>
IF-ID-2: virbr0-nic state: down mac: <filter>
Drives: Local Storage: total: 238.47 GiB used: 55.35 GiB (23.2%)
ID-1: /dev/sda vendor: SanDisk model: X400 M.2 2280 256GB size: 238.47 GiB
speed: 6.0 Gb/s serial: <filter>
Partition: ID-1: / size: 233.24 GiB used: 55.35 GiB (23.7%) fs: ext4 dev: /dev/sda5
Sensors: System Temperatures: cpu: 37.0 C mobo: N/A
Fan Speeds (RPM): cpu: 0
Repos: No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list
1: deb [arch=amd64] https: //brave-browser-apt-release.s3.brave.com/ stable main
Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
1: deb http: //packages.linuxmint.com ulyssa main upstream import backport #id:linuxmint_main
2: deb http: //archive.ubuntu.com/ubuntu focal main restricted universe multiverse
3: deb http: //archive.ubuntu.com/ubuntu focal-updates main restricted universe multiverse
4: deb http: //archive.ubuntu.com/ubuntu focal-backports main restricted universe multiverse
5: deb http: //security.ubuntu.com/ubuntu/ focal-security main restricted universe multiverse
6: deb http: //archive.canonical.com/ubuntu/ focal partner
Active apt repos in: /etc/apt/sources.list.d/teamviewer.list
1: deb https: //linux.teamviewer.com/deb stable main
Info: Processes: 245 Uptime: 3m Memory: 7.59 GiB used: 1.26 GiB (16.6%) Init: systemd v: 245
runlevel: 5 Compilers: gcc: 9.3.0 alt: 9 Client: Unknown python3.8 client inxi: 3.0.38
Now when I try to update the driver I get the following:
$ sudo dpkg -i e1000e-dkms_3.8.4_all.deb
(Reading database ... 443135 files and directories currently installed.)
Preparing to unpack e1000e-dkms_3.8.4_all.deb ...
------------------------------
Deleting module version: 3.8.4
completely from the DKMS tree.
------------------------------
Done.
Unpacking e1000e-dkms (3.8.4) over (3.8.4) ...
Setting up e1000e-dkms (3.8.4) ...
Loading new e1000e-3.8.4 DKMS files...
Building for 5.8.0-45-generic
Building for architecture amd64
Building initial module for 5.8.0-45-generic
Error! Bad return status for module build on kernel: 5.8.0-45-generic (amd64)
Consult /var/lib/dkms/e1000e/3.8.4/build/make.log for more information.
dpkg: error processing package e1000e-dkms (--install):
installed e1000e-dkms package post-installation script subprocess returned error exit status 10
Errors were encountered while processing:
e1000e-dkms
---------------
Error Log
dmesg | grep e1000e
[ 1.112618] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.112619] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.117621] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.205285] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[ 1.277365] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 18:db:f2:55:f9:6b
[ 1.277370] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[ 1.277457] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
[ 1.305933] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
[ 56.467337] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 56.467342] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 57.286235] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
[ 73.060422] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 73.060427] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 73.850118] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
[ 103.030544] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 103.030549] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 103.832624] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
[ 105.539979] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 105.539992] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 106.331040] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
[ 108.054384] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 108.054389] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 108.881558] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
[ 176.992560] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 176.992568] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 177.816098] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
[ 179.522521] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 179.522528] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 180.316217] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
[ 182.112546] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 182.112554] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 182.928163] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
[ 209.689886] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 209.689895] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 210.489312] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
[ 212.195445] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 212.195454] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 213.028896] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
[ 214.853905] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 214.853907] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 215.648520] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
[ 228.487737] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 228.487744] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 229.250079] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
System
System: Kernel: 5.8.0-45-generic x86_64 bits: 64 compiler: N/A Desktop: Cinnamon 4.8.6
wm: muffin dm: LightDM Distro: Linux Mint 20.1 Ulyssa base: Ubuntu 20.04 focal
Machine: Type: Laptop System: Dell product: Latitude E7470 v: N/A serial: <filter> Chassis:
type: 9 serial: <filter>
Mobo: Dell model: 0T6HHJ v: A00 serial: <filter> UEFI [Legacy]: Dell v: 1.27.3
date: 01/07/2021
Battery: ID-1: BAT0 charge: 9.7 Wh condition: 51.1/55.0 Wh (93%) volts: 7.9/7.6
model: Samsung SDI DELL 1W2Y26B serial: <filter> status: Charging
CPU: Topology: Dual Core model: Intel Core i5-6300U bits: 64 type: MT MCP arch: Skylake
rev: 3 L2 cache: 3072 KiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 19999
Speed: 702 MHz min/max: 400/3000 MHz Core speeds (MHz): 1: 751 2: 723 3: 704 4: 718
Graphics: Device-1: Intel Skylake GT2 [HD Graphics 520] vendor: Dell Latitude E7470 driver: i915
v: kernel bus ID: 00:02.0 chip ID: 8086:1916
Display: x11 server: X.Org 1.20.9 driver: modesetting unloaded: fbdev,vesa
resolution: 2048x1152~60Hz
OpenGL: renderer: Mesa Intel HD Graphics 520 (SKL GT2) v: 4.6 Mesa 20.2.6
direct render: Yes
Audio: Device-1: Intel Sunrise Point-LP HD Audio vendor: Dell Latitude E7470
driver: snd_hda_intel v: kernel bus ID: 00:1f.3 chip ID: 8086:9d70
Sound Server: ALSA v: k5.8.0-45-generic
Network: Device-1: Intel Ethernet I219-LM vendor: Dell Latitude E7470 driver: e1000e v: 3.2.6-k
port: f040 bus ID: 00:1f.6 chip ID: 8086:156f
IF: enp0s31f6 state: down mac: <filter>
Device-2: Intel Wireless 8260 driver: iwlwifi v: kernel port: f040 bus ID: 01:00.0
chip ID: 8086:24f3
IF: wlp1s0 state: up mac: <filter>
IF-ID-1: virbr0 state: down mac: <filter>
IF-ID-2: virbr0-nic state: down mac: <filter>
Drives: Local Storage: total: 238.47 GiB used: 55.35 GiB (23.2%)
ID-1: /dev/sda vendor: SanDisk model: X400 M.2 2280 256GB size: 238.47 GiB
speed: 6.0 Gb/s serial: <filter>
Partition: ID-1: / size: 233.24 GiB used: 55.35 GiB (23.7%) fs: ext4 dev: /dev/sda5
Sensors: System Temperatures: cpu: 37.0 C mobo: N/A
Fan Speeds (RPM): cpu: 0
Repos: No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list
1: deb [arch=amd64] https: //brave-browser-apt-release.s3.brave.com/ stable main
Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
1: deb http: //packages.linuxmint.com ulyssa main upstream import backport #id:linuxmint_main
2: deb http: //archive.ubuntu.com/ubuntu focal main restricted universe multiverse
3: deb http: //archive.ubuntu.com/ubuntu focal-updates main restricted universe multiverse
4: deb http: //archive.ubuntu.com/ubuntu focal-backports main restricted universe multiverse
5: deb http: //security.ubuntu.com/ubuntu/ focal-security main restricted universe multiverse
6: deb http: //archive.canonical.com/ubuntu/ focal partner
Active apt repos in: /etc/apt/sources.list.d/teamviewer.list
1: deb https: //linux.teamviewer.com/deb stable main
Info: Processes: 245 Uptime: 3m Memory: 7.59 GiB used: 1.26 GiB (16.6%) Init: systemd v: 245
runlevel: 5 Compilers: gcc: 9.3.0 alt: 9 Client: Unknown python3.8 client inxi: 3.0.38
Re: Updating the Intel Network Driver
Please use code tags when posting results from Terminal, especially such long output. It makes it much easier to read,
Thanks.
Thanks.