Linux Mint 10 Newbie comments!

Questions and thoughts about present and future editions
Forum rules
Before you post please read this
Post Reply
User avatar
LasVegasNevada
Level 1
Level 1
Posts: 2
Joined: Thu Feb 17, 2011 7:12 pm

Linux Mint 10 Newbie comments!

Post by LasVegasNevada » Thu Feb 17, 2011 7:33 pm

Alright! I finally reconditioned my drive on my laptop using this operating system and I like it.

Laptop model:
Dell Vostro 1500 (Dell Page with Windows Drivers)http://support.dell.com/support/downloa ... id=&impid=
2GB RAM
Linux Mint 10 32bit edition.
DMESG minus my hardware MAC information.
:D
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35-22-generic (buildd@rothera) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu4) ) #33-Ubuntu SMP Sun Sep 19 20:34:50 UTC 2010 (Ubuntu 2.6.35-22.33-generic 2.6.35.4)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe6d800 (usable)
[ 0.000000] BIOS-e820: 000000007fe6d800 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[ 0.000000] DMI 2.4 present.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7fe6d max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (reserved)
[ 0.000000] modified: 0000000000001000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable)
[ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007fe6d800 (usable)
[ 0.000000] modified: 000000007fe6d800 - 0000000080000000 (reserved)
[ 0.000000] modified: 00000000f4000000 - 00000000f8000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fed18000 - 00000000fed1c000 (reserved)
[ 0.000000] modified: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] modified: 00000000feda0000 - 00000000feda6000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 15000-1a000
[ 0.000000] RAMDISK: 3707d000 - 37ff0000
[ 0.000000] Allocated new RAMDISK: 009a5000 - 019176ee
[ 0.000000] Move RAMDISK from 000000003707d000 - 0000000037fef6ed to 009a5000 - 019176ed
[ 0.000000] ACPI: RSDP 000fbbf0 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 7fe6f200 0005C (v01 DELL M08 27D80415 ASL 00000061)
[ 0.000000] ACPI: FACP 7fe6f09c 000F4 (v04 DELL M08 27D80415 ASL 00000061)
[ 0.000000] ACPI: DSDT 7fe6f800 05658 (v02 INT430 SYSFexxx 00001001 INTL 20050624)
[ 0.000000] ACPI: FACS 7fe7e000 00040
[ 0.000000] ACPI: HPET 7fe6f300 00038 (v01 DELL M08 00000001 ASL 00000061)
[ 0.000000] ACPI: APIC 7fe6f400 00068 (v01 DELL M08 27D80415 ASL 00000047)
[ 0.000000] ACPI: MCFG 7fe6f3c0 0003E (v16 DELL M08 27D80415 ASL 00000061)
[ 0.000000] ACPI: SLIC 7fe6f49c 00176 (v01 DELL M08 27D80415 ASL 00000061)
[ 0.000000] ACPI: BOOT 7fe6efc0 00028 (v01 DELL M08 27D80415 ASL 00000061)
[ 0.000000] ACPI: SSDT 7fe6dd06 004CC (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1158MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007fe6d
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x00000002
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fe6d
[ 0.000000] On node 0 totalpages: 523773
[ 0.000000] free_area_init_node: node 0, pgdat c07ffd40, node_mem_map c1919020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3952 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2317 pages used for memmap
[ 0.000000] HighMem zone: 294242 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] early_res array is doubled to 64 at [16000 - 167ff]
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000010000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:74000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s36416 r0 d20928 u2097152
[ 0.000000] pcpu-alloc: s36416 r0 d20928 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519680
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-22-generic root=UUID=d8c95101-3ead-434e-95b9-76be717721f7 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 10477680 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Subtract (47 early reservations)
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE
[ 0.000000] #2 [0000100000 - 00009a0adc] TEXT DATA BSS
[ 0.000000] #3 [000009f000 - 0000100000] BIOS reserved
[ 0.000000] #4 [00009a1000 - 00009a4188] BRK
[ 0.000000] #5 [0000010000 - 0000011000] TRAMPOLINE
[ 0.000000] #6 [0000011000 - 0000015000] ACPI WAKEUP
[ 0.000000] #7 [0000015000 - 0000016000] PGTABLE
[ 0.000000] #8 [00009a5000 - 0001918000] NEW RAMDISK
[ 0.000000] #9 [0001918000 - 0001919000] BOOTMEM
[ 0.000000] #10 [0001919000 - 0002919000] BOOTMEM
[ 0.000000] #11 [0002919000 - 0002919004] BOOTMEM
[ 0.000000] #12 [0002919040 - 0002919100] BOOTMEM
[ 0.000000] #13 [0002919100 - 0002919154] BOOTMEM
[ 0.000000] #14 [0002919180 - 000291c180] BOOTMEM
[ 0.000000] #15 [000291c180 - 000291c1f0] BOOTMEM
[ 0.000000] #16 [000291c200 - 0002922200] BOOTMEM
[ 0.000000] #17 [0002922200 - 0002922225] BOOTMEM
[ 0.000000] #18 [0002922240 - 0002922267] BOOTMEM
[ 0.000000] #19 [0002922280 - 0002922408] BOOTMEM
[ 0.000000] #20 [0002922440 - 0002922480] BOOTMEM
[ 0.000000] #21 [0002922480 - 00029224c0] BOOTMEM
[ 0.000000] #22 [00029224c0 - 0002922500] BOOTMEM
[ 0.000000] #23 [0002922500 - 0002922540] BOOTMEM
[ 0.000000] #24 [0002922540 - 0002922580] BOOTMEM
[ 0.000000] #25 [0002922580 - 00029225c0] BOOTMEM
[ 0.000000] #26 [00029225c0 - 0002922600] BOOTMEM
[ 0.000000] #27 [0002922600 - 0002922640] BOOTMEM
[ 0.000000] #28 [0002922640 - 0002922680] BOOTMEM
[ 0.000000] #29 [0002922680 - 00029226c0] BOOTMEM
[ 0.000000] #30 [00029226c0 - 0002922700] BOOTMEM
[ 0.000000] #31 [0002922700 - 0002922710] BOOTMEM
[ 0.000000] #32 [0002922740 - 0002922750] BOOTMEM
[ 0.000000] #33 [0002922780 - 00029227ea] BOOTMEM
[ 0.000000] #34 [0002922800 - 000292286a] BOOTMEM
[ 0.000000] #35 [0002c00000 - 0002c0e000] BOOTMEM
[ 0.000000] #36 [0002e00000 - 0002e0e000] BOOTMEM
[ 0.000000] #37 [0002924880 - 0002924884] BOOTMEM
[ 0.000000] #38 [00029248c0 - 00029248c4] BOOTMEM
[ 0.000000] #39 [0002924900 - 0002924908] BOOTMEM
[ 0.000000] #40 [0002924940 - 0002924948] BOOTMEM
[ 0.000000] #41 [0002924980 - 0002924a28] BOOTMEM
[ 0.000000] #42 [0002924a40 - 0002924aa8] BOOTMEM
[ 0.000000] #43 [0002924ac0 - 0002928ac0] BOOTMEM
[ 0.000000] #44 [0002928ac0 - 00029a8ac0] BOOTMEM
[ 0.000000] #45 [00029a8ac0 - 00029e8ac0] BOOTMEM
[ 0.000000] #46 [0002e0e000 - 000380c070] BOOTMEM
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007fe6d)
[ 0.000000] Memory: 2042828k/2095540k available (4928k kernel code, 52264k reserved, 2336k data, 684k init, 1186236k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc0819000 - 0xc08c4000 ( 684 kB)
[ 0.000000] .data : 0xc05d029e - 0xc0818668 (2336 kB)
[ 0.000000] .text : 0xc0100000 - 0xc05d029e (4928 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1994.859 MHz processor.
[ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.71 BogoMIPS (lpj=7979436)
[ 0.004015] pid_max: default: 32768 minimum: 301
[ 0.004046] Security Framework initialized
[ 0.008011] AppArmor: AppArmor initialized
[ 0.008015] Yama: becoming mindful.
[ 0.008100] Mount-cache hash table entries: 512
[ 0.008295] Initializing cgroup subsys ns
[ 0.008301] Initializing cgroup subsys cpuacct
[ 0.008309] Initializing cgroup subsys memory
[ 0.008323] Initializing cgroup subsys devices
[ 0.008327] Initializing cgroup subsys freezer
[ 0.008331] Initializing cgroup subsys net_cls
[ 0.008373] CPU: Physical Processor ID: 0
[ 0.008377] CPU: Processor Core ID: 0
[ 0.008381] mce: CPU supports 6 MCE banks
[ 0.008395] CPU0: Thermal monitoring enabled (TM2)
[ 0.008401] using mwait in idle threads.
[ 0.008411] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.008420] PEBS disabled due to CPU errata.
[ 0.008431] ... version: 2
[ 0.008434] ... bit width: 40
[ 0.008437] ... generic registers: 2
[ 0.008440] ... value mask: 000000ffffffffff
[ 0.008444] ... max period: 000000007fffffff
[ 0.008447] ... fixed-purpose events: 3
[ 0.008450] ... event mask: 0000000700000003
[ 0.013075] ACPI: Core revision 20100428
[ 0.024014] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.024023] ftrace: allocating 21758 entries in 43 pages
[ 0.028066] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.028475] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.068758] CPU0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
[ 0.072000] Booting Node 0, Processors #1 Ok.
[ 0.008000] Initializing CPU#1
[ 0.160021] Brought up 2 CPUs
[ 0.160026] Total of 2 processors activated (7979.71 BogoMIPS).
[ 0.161094] devtmpfs: initialized
[ 0.161702] regulator: core version 0.5
[ 0.161743] Time: 22:44:14 Date: 02/17/11
[ 0.161809] NET: Registered protocol family 16
[ 0.161844] Trying to unpack rootfs image as initramfs...
[ 0.162021] EISA bus registered
[ 0.162034] ACPI: bus type pci registered
[ 0.162155] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
[ 0.162160] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
[ 0.162164] PCI: Using MMCONFIG for extended config space
[ 0.162168] PCI: Using configuration type 1 for base access
[ 0.168230] bio: create slab <bio-0> at 0
[ 0.170791] ACPI: EC: Look up EC in DSDT
[ 0.210288] ACPI: SSDT 7fe6e1d2 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.210288] ACPI: Dynamic OEM Table Load:
[ 0.210288] ACPI: SSDT (null) 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.210288] ACPI: SSDT 7fe6e7b7 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.212657] ACPI: Dynamic OEM Table Load:
[ 0.212663] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.212780] ACPI: Interpreter enabled
[ 0.212786] ACPI: (supports S0 S3 S4 S5)
[ 0.212824] ACPI: Using IOAPIC for interrupt routing
[ 0.276220] ACPI: No dock devices found.
[ 0.276229] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.304614] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.361357] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.361364] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.361370] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.361375] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.361381] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xf3ffffff]
[ 0.361386] pci_root PNP0A03:00: host bridge window [mem 0xf8000000-0xfebfffff]
[ 0.361391] pci_root PNP0A03:00: host bridge window [mem 0xfec10000-0xfecfffff]
[ 0.361396] pci_root PNP0A03:00: host bridge window [mem 0xfed1c000-0xfed1ffff]
[ 0.361401] pci_root PNP0A03:00: host bridge window [mem 0xfed90000-0xfed9ffff]
[ 0.361406] pci_root PNP0A03:00: host bridge window [mem 0xfeda7000-0xfedfffff]
[ 0.361411] pci_root PNP0A03:00: host bridge window [mem 0xfee10000-0xff9fffff]
[ 0.361416] pci_root PNP0A03:00: host bridge window [mem 0xffb00000-0xffefffff]
[ 0.361558] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.361565] pci 0000:00:01.0: PME# disabled
[ 0.361685] pci 0000:00:1a.0: reg 20: [io 0x6f20-0x6f3f]
[ 0.361773] pci 0000:00:1a.1: reg 20: [io 0x6f00-0x6f1f]
[ 0.361860] pci 0000:00:1a.7: reg 10: [mem 0xfed1c400-0xfed1c7ff]
[ 0.361945] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.361953] pci 0000:00:1a.7: PME# disabled
[ 0.362015] pci 0000:00:1b.0: reg 10: [mem 0xfebfc000-0xfebfffff 64bit]
[ 0.362098] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.362106] pci 0000:00:1b.0: PME# disabled
[ 0.362239] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.362247] pci 0000:00:1c.0: PME# disabled
[ 0.362385] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.362392] pci 0000:00:1c.1: PME# disabled
[ 0.362533] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.362540] pci 0000:00:1c.3: PME# disabled
[ 0.362628] pci 0000:00:1d.0: reg 20: [io 0x6f80-0x6f9f]
[ 0.362715] pci 0000:00:1d.1: reg 20: [io 0x6f60-0x6f7f]
[ 0.362801] pci 0000:00:1d.2: reg 20: [io 0x6f40-0x6f5f]
[ 0.362889] pci 0000:00:1d.7: reg 10: [mem 0xfed1c000-0xfed1c3ff]
[ 0.362974] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.362983] pci 0000:00:1d.7: PME# disabled
[ 0.363198] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.363205] pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6 GPIO
[ 0.363213] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
[ 0.363222] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
[ 0.363293] pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7]
[ 0.363305] pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7]
[ 0.363316] pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177]
[ 0.363328] pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377]
[ 0.363339] pci 0000:00:1f.1: reg 20: [io 0x6fa0-0x6faf]
[ 0.363409] pci 0000:00:1f.2: reg 10: [io 0x6eb0-0x6eb7]
[ 0.363421] pci 0000:00:1f.2: reg 14: [io 0x6eb8-0x6ebb]
[ 0.363433] pci 0000:00:1f.2: reg 18: [io 0x6ec0-0x6ec7]
[ 0.363444] pci 0000:00:1f.2: reg 1c: [io 0x6ec8-0x6ecb]
[ 0.363456] pci 0000:00:1f.2: reg 20: [io 0x6ee0-0x6eef]
[ 0.363467] pci 0000:00:1f.2: reg 24: [io 0xeff0-0xefff]
[ 0.363509] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.363516] pci 0000:00:1f.2: PME# disabled
[ 0.363552] pci 0000:00:1f.3: reg 10: [mem 0xfebfbf00-0xfebfbfff]
[ 0.363587] pci 0000:00:1f.3: reg 20: [io 0x10c0-0x10df]
[ 0.363719] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
[ 0.363741] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.363763] pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
[ 0.363776] pci 0000:01:00.0: reg 24: [io 0xdf00-0xdf7f]
[ 0.363789] pci 0000:01:00.0: reg 30: [mem 0xfea00000-0xfea1ffff pref]
[ 0.372025] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.372032] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.372038] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff]
[ 0.372047] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.372132] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
[ 0.372140] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.372149] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.372161] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.372292] pci 0000:0c:00.0: reg 10: [mem 0xf9ffc000-0xf9ffffff]
[ 0.372413] pci 0000:0c:00.0: supports D1 D2
[ 0.372449] pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.372466] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c]
[ 0.372474] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
[ 0.372483] pci 0000:00:1c.1: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 0.372495] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.372579] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
[ 0.372587] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
[ 0.372595] pci 0000:00:1c.3: bridge window [mem 0xf9c00000-0xf9efffff]
[ 0.372607] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.372688] pci 0000:03:00.0: reg 10: [mem 0xf9bfe000-0xf9bfffff]
[ 0.372766] pci 0000:03:00.0: supports D1 D2
[ 0.372770] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.372777] pci 0000:03:00.0: PME# disabled
[ 0.372826] pci 0000:03:01.0: proprietary Ricoh MMC controller disabled (via firewire function)
[ 0.372830] pci 0000:03:01.0: MMC cards are now supported by standard SDHCI controller
[ 0.372847] pci 0000:03:01.0: reg 10: [mem 0xf9bfd800-0xf9bfdfff]
[ 0.372925] pci 0000:03:01.0: supports D1 D2
[ 0.372929] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.372937] pci 0000:03:01.0: PME# disabled
[ 0.372988] pci 0000:03:01.1: reg 10: [mem 0xf9bfd400-0xf9bfd4ff]
[ 0.373067] pci 0000:03:01.1: supports D1 D2
[ 0.373071] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.373079] pci 0000:03:01.1: PME# disabled
[ 0.373128] pci 0000:03:01.2: reg 10: [mem 0xf9bfd600-0xf9bfd6ff]
[ 0.373208] pci 0000:03:01.2: supports D1 D2
[ 0.373212] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.373220] pci 0000:03:01.2: PME# disabled
[ 0.373270] pci 0000:03:01.3: reg 10: [mem 0xf9bfd700-0xf9bfd7ff]
[ 0.373349] pci 0000:03:01.3: supports D1 D2
[ 0.373352] pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.373361] pci 0000:03:01.3: PME# disabled
[ 0.373456] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.373464] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.373472] pci 0000:00:1e.0: bridge window [mem 0xf9b00000-0xf9bfffff]
[ 0.373484] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.373489] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.373494] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.373499] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.373504] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.373509] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xf3ffffff] (subtractive decode)
[ 0.373513] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfebfffff] (subtractive decode)
[ 0.373518] pci 0000:00:1e.0: bridge window [mem 0xfec10000-0xfecfffff] (subtractive decode)
[ 0.373523] pci 0000:00:1e.0: bridge window [mem 0xfed1c000-0xfed1ffff] (subtractive decode)
[ 0.373527] pci 0000:00:1e.0: bridge window [mem 0xfed90000-0xfed9ffff] (subtractive decode)
[ 0.373532] pci 0000:00:1e.0: bridge window [mem 0xfeda7000-0xfedfffff] (subtractive decode)
[ 0.373541] pci 0000:00:1e.0: bridge window [mem 0xfee10000-0xff9fffff] (subtractive decode)
[ 0.373545] pci 0000:00:1e.0: bridge window [mem 0xffb00000-0xffefffff] (subtractive decode)
[ 0.373588] pci_bus 0000:00: on NUMA node 0
[ 0.373599] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.374218] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 0.374483] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.374617] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.374764] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.374918] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.400464] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *7
[ 0.400681] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[ 0.400893] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4
[ 0.401106] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11)
[ 0.401320] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.401540] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.401759] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.401952] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.402055] HEST: Table is not found!
[ 0.402199] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.402211] vgaarb: loaded
[ 0.402495] SCSI subsystem initialized
[ 0.402621] libata version 3.00 loaded.
[ 0.402711] usbcore: registered new interface driver usbfs
[ 0.402733] usbcore: registered new interface driver hub
[ 0.402775] usbcore: registered new device driver usb
[ 0.403195] ACPI: WMI: Mapper loaded
[ 0.403199] PCI: Using ACPI for IRQ routing
[ 0.403204] PCI: pci_cache_line_size set to 64 bytes
[ 0.403397] reserve RAM buffer: 0000000000002000 - 000000000000ffff
[ 0.403401] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 0.403406] reserve RAM buffer: 000000007fe6d800 - 000000007fffffff
[ 0.403563] NetLabel: Initializing
[ 0.403567] NetLabel: domain hash size = 128
[ 0.403570] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.403590] NetLabel: unlabeled traffic allowed by default
[ 0.403641] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.403652] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.403661] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.412050] Switching to clocksource tsc
[ 0.431269] AppArmor: AppArmor Filesystem Enabled
[ 0.431290] pnp: PnP ACPI init
[ 0.431317] ACPI: bus type pnp registered
[ 0.461374] pnp 00:09: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.461382] pnp 00:09: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.461575] pnp 00:0a: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.461582] pnp 00:0a: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.461588] pnp 00:0a: disabling [io 0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.461594] pnp 00:0a: disabling [io 0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.494872] pnp: PnP ACPI: found 12 devices
[ 0.494876] ACPI: ACPI bus type pnp unregistered
[ 0.494883] PnPBIOS: Disabled by ACPI PNP
[ 0.494905] system 00:05: [io 0x0c80-0x0cff] could not be reserved
[ 0.494919] system 00:08: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.494930] system 00:09: [io 0x0900-0x097f] has been reserved
[ 0.494936] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.494946] system 00:0a: [io 0xf400-0xf4fe] has been reserved
[ 0.494952] system 00:0a: [io 0x1080-0x10bf] has been reserved
[ 0.494957] system 00:0a: [io 0x10c0-0x10df] has been reserved
[ 0.494962] system 00:0a: [io 0x0809] has been reserved
[ 0.494972] system 00:0b: [mem 0x00000000-0x0009efff] could not be reserved
[ 0.494978] system 00:0b: [mem 0x0009f000-0x0009ffff] could not be reserved
[ 0.494983] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.494988] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.494994] system 00:0b: [mem 0x00100000-0x7fe6d7ff] could not be reserved
[ 0.494999] system 00:0b: [mem 0x7fe6d800-0x7fefffff] has been reserved
[ 0.495005] system 00:0b: [mem 0x7ff00000-0x7fffffff] has been reserved
[ 0.495010] system 00:0b: [mem 0x7ff00000-0x806fffff] could not be reserved
[ 0.495015] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.495021] system 00:0b: [mem 0xffa00000-0xffafffff] has been reserved
[ 0.495026] system 00:0b: [mem 0xfec00000-0xfec0ffff] could not be reserved
[ 0.495031] system 00:0b: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.495037] system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.495042] system 00:0b: [mem 0xfeda0000-0xfeda3fff] has been reserved
[ 0.495047] system 00:0b: [mem 0xfeda4000-0xfeda4fff] has been reserved
[ 0.495052] system 00:0b: [mem 0xfeda5000-0xfeda5fff] has been reserved
[ 0.495058] system 00:0b: [mem 0xfeda6000-0xfeda6fff] has been reserved
[ 0.495063] system 00:0b: [mem 0xfed18000-0xfed1bfff] has been reserved
[ 0.495068] system 00:0b: [mem 0xf4000000-0xf7ffffff] has been reserved
[ 0.532344] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
[ 0.532353] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
[ 0.532360] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
[ 0.532366] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.532372] pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.532377] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.532382] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.532389] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff]
[ 0.532396] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.532404] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
[ 0.532410] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.532419] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff]
[ 0.532427] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
[ 0.532439] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c]
[ 0.532445] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.532454] pci 0000:00:1c.1: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 0.532462] pci 0000:00:1c.1: bridge window [mem 0x80400000-0x805fffff 64bit pref]
[ 0.532474] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
[ 0.532480] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
[ 0.532490] pci 0000:00:1c.3: bridge window [mem 0xf9c00000-0xf9efffff]
[ 0.532498] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.532511] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[ 0.532514] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.532523] pci 0000:00:1e.0: bridge window [mem 0xf9b00000-0xf9bfffff]
[ 0.532531] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.532556] alloc irq_desc for 16 on node -1
[ 0.532560] alloc kstat_irqs on node -1
[ 0.532571] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.532578] pci 0000:00:01.0: setting latency timer to 64
[ 0.532595] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.532603] pci 0000:00:1c.0: setting latency timer to 64
[ 0.532619] alloc irq_desc for 17 on node -1
[ 0.532622] alloc kstat_irqs on node -1
[ 0.532629] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.532637] pci 0000:00:1c.1: setting latency timer to 64
[ 0.532653] alloc irq_desc for 19 on node -1
[ 0.532656] alloc kstat_irqs on node -1
[ 0.532662] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.532670] pci 0000:00:1c.3: setting latency timer to 64
[ 0.532684] pci 0000:00:1e.0: setting latency timer to 64
[ 0.532692] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.532696] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.532701] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.532705] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.532710] pci_bus 0000:00: resource 8 [mem 0x80000000-0xf3ffffff]
[ 0.532714] pci_bus 0000:00: resource 9 [mem 0xf8000000-0xfebfffff]
[ 0.532718] pci_bus 0000:00: resource 10 [mem 0xfec10000-0xfecfffff]
[ 0.532723] pci_bus 0000:00: resource 11 [mem 0xfed1c000-0xfed1ffff]
[ 0.532727] pci_bus 0000:00: resource 12 [mem 0xfed90000-0xfed9ffff]
[ 0.532732] pci_bus 0000:00: resource 13 [mem 0xfeda7000-0xfedfffff]
[ 0.532736] pci_bus 0000:00: resource 14 [mem 0xfee10000-0xff9fffff]
[ 0.532740] pci_bus 0000:00: resource 15 [mem 0xffb00000-0xffefffff]
[ 0.532745] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.532749] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfeafffff]
[ 0.532754] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.532759] pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff]
[ 0.532763] pci_bus 0000:0b: resource 1 [mem 0x80000000-0x801fffff]
[ 0.532768] pci_bus 0000:0b: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[ 0.532772] pci_bus 0000:0c: resource 0 [io 0x3000-0x3fff]
[ 0.532776] pci_bus 0000:0c: resource 1 [mem 0xf9f00000-0xf9ffffff]
[ 0.532781] pci_bus 0000:0c: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[ 0.532785] pci_bus 0000:0d: resource 0 [io 0xc000-0xcfff]
[ 0.532789] pci_bus 0000:0d: resource 1 [mem 0xf9c00000-0xf9efffff]
[ 0.532794] pci_bus 0000:0d: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.532799] pci_bus 0000:03: resource 1 [mem 0xf9b00000-0xf9bfffff]
[ 0.532803] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.532807] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.532812] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.532816] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.532820] pci_bus 0000:03: resource 8 [mem 0x80000000-0xf3ffffff]
[ 0.532825] pci_bus 0000:03: resource 9 [mem 0xf8000000-0xfebfffff]
[ 0.532829] pci_bus 0000:03: resource 10 [mem 0xfec10000-0xfecfffff]
[ 0.532834] pci_bus 0000:03: resource 11 [mem 0xfed1c000-0xfed1ffff]
[ 0.532838] pci_bus 0000:03: resource 12 [mem 0xfed90000-0xfed9ffff]
[ 0.532842] pci_bus 0000:03: resource 13 [mem 0xfeda7000-0xfedfffff]
[ 0.532847] pci_bus 0000:03: resource 14 [mem 0xfee10000-0xff9fffff]
[ 0.532851] pci_bus 0000:03: resource 15 [mem 0xffb00000-0xffefffff]
[ 0.532916] NET: Registered protocol family 2
[ 0.533027] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.533440] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.534004] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.534283] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.534287] TCP reno registered
[ 0.534292] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.534304] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.534426] NET: Registered protocol family 1
[ 0.534682] pci 0000:01:00.0: Boot video device
[ 0.534714] PCI: CLS 64 bytes, default 64
[ 0.534753] Simple Boot Flag at 0x79 set to 0x1
[ 0.535037] cpufreq-nforce2: No nForce2 chipset.
[ 0.535088] Scanning for low memory corruption every 60 seconds
[ 0.535292] audit: initializing netlink socket (disabled)
[ 0.535313] type=2000 audit(1297982654.528:1): initialized
[ 0.553777] highmem bounce pool size: 64 pages
[ 0.553787] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.556462] VFS: Disk quotas dquot_6.5.2
[ 0.556573] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.557602] fuse init (API version 7.14)
[ 0.557759] msgmni has been set to 1673
[ 0.562125] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.562130] io scheduler noop registered
[ 0.562134] io scheduler deadline registered
[ 0.562157] io scheduler cfq registered (default)
[ 0.562363] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.562407] alloc irq_desc for 40 on node -1
[ 0.562411] alloc kstat_irqs on node -1
[ 0.562424] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.562553] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.562616] alloc irq_desc for 41 on node -1
[ 0.562620] alloc kstat_irqs on node -1
[ 0.562633] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.562788] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.562851] alloc irq_desc for 42 on node -1
[ 0.562854] alloc kstat_irqs on node -1
[ 0.562867] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.563019] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.563083] alloc irq_desc for 43 on node -1
[ 0.563086] alloc kstat_irqs on node -1
[ 0.563099] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.563291] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.563488] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.563648] intel_idle: MWAIT substates: 0x22220
[ 0.563652] intel_idle: does not run on family 6 model 15
[ 0.563863] ACPI: AC Adapter [AC] (on-line)
[ 0.564000] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.564567] ACPI: Lid Switch [LID]
[ 0.564648] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.564656] ACPI: Power Button [PBTN]
[ 0.564732] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.564738] ACPI: Sleep Button [SBTN]
[ 0.565241] ACPI: acpi_idle registered with cpuidle
[ 0.565898] Monitor-Mwait will be used to enter C-1 state
[ 0.575907] Monitor-Mwait will be used to enter C-2 state
[ 0.575948] Monitor-Mwait will be used to enter C-3 state
[ 0.575958] Marking TSC unstable due to TSC halts in idle
[ 0.584073] Switching to clocksource hpet
[ 0.587846] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.587861] ACPI: Thermal Zone [THM] (55 C)
[ 0.588077] ERST: Table is not found!
[ 0.588381] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.591071] brd: module loaded
[ 0.591990] loop: module loaded
[ 0.591990] ata_piix 0000:00:1f.1: version 2.13
[ 0.591990] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.591990] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.591990] scsi0 : ata_piix
[ 0.592007] scsi1 : ata_piix
[ 0.593738] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
[ 0.593744] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
[ 0.593782] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.593791] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.593938] ACPI: Battery Slot [BAT0] (battery absent)
[ 0.593958] isapnp: Scanning for PnP cards...
[ 0.643359] ata2: port disabled. ignoring.
[ 0.774335] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.818081] scsi2 : ata_piix
[ 0.862060] scsi3 : ata_piix
[ 0.863151] ata3: SATA max UDMA/133 cmd 0x6eb0 ctl 0x6eb8 bmdma 0x6ee0 irq 17
[ 0.863163] ata4: SATA max UDMA/133 cmd 0x6ec0 ctl 0x6ec8 bmdma 0x6ee8 irq 17
[ 0.863792] Fixed MDIO Bus: probed
[ 0.863853] PPP generic driver version 2.4.2
[ 0.863956] tun: Universal TUN/TAP device driver, 1.6
[ 0.863959] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.864116] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.864152] alloc irq_desc for 22 on node -1
[ 0.864155] alloc kstat_irqs on node -1
[ 0.864167] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.864193] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.864199] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.864264] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.864306] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.868194] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 0.868223] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
[ 0.872519] ata1.00: ATAPI: HL-DT-ST DVD+/-RW GSA-T11N, A103, max UDMA/33
[ 0.887784] Freeing initrd memory: 15820k freed
[ 0.908045] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.908328] hub 1-0:1.0: USB hub found
[ 0.908337] hub 1-0:1.0: 4 ports detected
[ 0.908487] alloc irq_desc for 20 on node -1
[ 0.908491] alloc kstat_irqs on node -1
[ 0.908504] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.908535] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.908541] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.908614] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.908658] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.912539] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.912570] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
[ 0.928018] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.928198] hub 2-0:1.0: USB hub found
[ 0.928205] hub 2-0:1.0: 6 ports detected
[ 0.928345] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.928376] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.928433] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.928444] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.928449] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.928506] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.928542] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
[ 0.928742] hub 3-0:1.0: USB hub found
[ 0.928750] hub 3-0:1.0: 2 ports detected
[ 0.928866] alloc irq_desc for 21 on node -1
[ 0.928870] alloc kstat_irqs on node -1
[ 0.928878] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.928888] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.928894] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.928954] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.929002] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
[ 0.929203] hub 4-0:1.0: USB hub found
[ 0.929210] hub 4-0:1.0: 2 ports detected
[ 0.929323] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.929333] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.929339] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.929395] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.929430] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
[ 0.929641] hub 5-0:1.0: USB hub found
[ 0.929650] hub 5-0:1.0: 2 ports detected
[ 0.929760] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.929770] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.929776] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.929836] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.929869] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
[ 0.930068] hub 6-0:1.0: USB hub found
[ 0.930075] hub 6-0:1.0: 2 ports detected
[ 0.930189] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.930199] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.930204] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.930261] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.930296] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
[ 0.930508] hub 7-0:1.0: USB hub found
[ 0.930515] hub 7-0:1.0: 2 ports detected
[ 0.930745] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.933526] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.933537] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.933723] mice: PS/2 mouse device common for all mice
[ 0.933972] rtc_cmos 00:03: RTC can wake from S4
[ 0.934038] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.934077] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.934276] device-mapper: uevent: version 1.0.3
[ 0.934461] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 0.934581] device-mapper: multipath: version 1.1.1 loaded
[ 0.934586] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.934775] EISA: Probing bus 0 at eisa.0
[ 0.934779] EISA: Cannot allocate resource for mainboard
[ 0.934784] Cannot allocate resource for EISA slot 1
[ 0.934787] Cannot allocate resource for EISA slot 2
[ 0.934791] Cannot allocate resource for EISA slot 3
[ 0.934795] Cannot allocate resource for EISA slot 4
[ 0.934799] Cannot allocate resource for EISA slot 5
[ 0.934802] Cannot allocate resource for EISA slot 6
[ 0.934806] Cannot allocate resource for EISA slot 7
[ 0.934809] Cannot allocate resource for EISA slot 8
[ 0.934812] EISA: Detected 0 cards.
[ 0.935050] cpuidle: using governor ladder
[ 0.935242] cpuidle: using governor menu
[ 0.935829] TCP cubic registered
[ 0.936072] NET: Registered protocol family 10
[ 0.936730] lo: Disabled Privacy Extensions
[ 0.937170] NET: Registered protocol family 17
[ 0.937237] Using IPI No-Shortcut mode
[ 0.937371] PM: Resume from disk failed.
[ 0.937396] registered taskstats version 1
[ 0.937892] Magic number: 15:271:755
[ 0.938012] rtc_cmos 00:03: setting system clock to 2011-02-17 22:44:15 UTC (1297982655)
[ 0.938017] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.938020] EDD information not available.
[ 0.939803] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.960199] isapnp: No Plug & Play device found
[ 0.960564] ata1.00: configured for UDMA/33
[ 0.969785] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-T11N A103 PQ: 0 ANSI: 5
[ 0.981974] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 0.981980] Uniform CD-ROM driver Revision: 3.20
[ 0.982181] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 0.982287] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.656250] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.656274] ata3.01: SATA link down (SStatus 0 SControl 300)
[ 1.714003] ata3.00: ATA-8: ST9500325AS, 0001SDM1, max UDMA/133
[ 1.714009] ata3.00: 976773168 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 1.728942] ata3.00: configured for UDMA/133
[ 1.729217] scsi 2:0:0:0: Direct-Access ATA ST9500325AS 0001 PQ: 0 ANSI: 5
[ 1.729465] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.729486] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.729564] sd 2:0:0:0: [sda] Write Protect is off
[ 1.729569] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.729664] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.730138] sda: sda1 sda2 < sda5 >
[ 1.757360] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.244145] ata4.01: failed to resume link (SControl 0)
[ 2.244206] ata4.00: SATA link down (SStatus 0 SControl 300)
[ 2.244234] ata4.01: SATA link down (SStatus 0 SControl 0)
[ 2.244340] Freeing unused kernel memory: 684k freed
[ 2.244908] Write protecting the kernel text: 4932k
[ 2.245006] Write protecting the kernel read-only data: 1976k
[ 2.276904] udev[92]: starting version 163
[ 2.459717] sdhci: Secure Digital Host Controller Interface driver
[ 2.459722] sdhci: Copyright(c) Pierre Ossman
[ 2.471307] sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 22)
[ 2.471333] alloc irq_desc for 18 on node -1
[ 2.471337] alloc kstat_irqs on node -1
[ 2.471348] sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 2.522260] Registered led device: mmc0::
[ 2.528467] Linux agpgart interface v0.103
[ 2.534316] b43-pci-bridge 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.534331] b43-pci-bridge 0000:0c:00.0: setting latency timer to 64
[ 2.534358] mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA
[ 2.558270] firewire_ohci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.563316] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243)
[ 2.563331] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243)
[ 2.563344] ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243)
[ 2.563358] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243)
[ 2.600976] acpi device:30: registered as cooling_device2
[ 2.601837] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:2d/LNXVIDEO:00/input/input4
[ 2.601910] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 2.601992] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 2.604180] ssb: Sonics Silicon Backplane found on PCI device 0000:0c:00.0
[ 2.728195] firewire_ohci: Added fw-ohci device 0000:03:01.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x0
[ 2.728250] b44 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.748177] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
[ 2.748190] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
[ 2.748201] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
[ 2.788162] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
[ 2.788203] b44: b44.c:v2.0
[ 2.813431] b44 ssb1:0: eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:1c:23:82:de:36
[ 3.056562] Btrfs loaded
[ 3.065580] xor: automatically using best checksumming function: pIII_sse
[ 3.084027] pIII_sse : 4396.000 MB/sec
[ 3.084031] xor: using function: pIII_sse (4396.000 MB/sec)
[ 3.088487] device-mapper: dm-raid45: initialized v0.2594b
[ 3.221204] firewire_core: created device fw0: GUID 484fc0001bad2981, S400
[ 3.525305] EXT4-fs (sda5): INFO: recovery required on readonly filesystem
[ 3.525313] EXT4-fs (sda5): write access will be enabled during recovery
[ 4.848208] EXT4-fs (sda5): orphan cleanup on readonly fs
[ 4.848224] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 27787289
[ 4.848271] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 27787288
[ 4.848289] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 27787287
[ 4.848305] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 27787286
[ 4.848321] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 27787284
[ 4.848336] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 27787282
[ 4.848412] EXT4-fs (sda5): 6 orphan inodes deleted
[ 4.848418] EXT4-fs (sda5): recovery complete
[ 5.034302] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 16.216249] udev[452]: starting version 163
[ 16.266584] lp: driver loaded but no devices found
[ 16.318670] Adding 3905532k swap on /dev/sda1. Priority:-1 extents:1 across:3905532k
[ 16.705998] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 16.743506] r852 0000:03:01.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 16.751612] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 16.761450] r852: driver loaded succesfully
[ 17.121182] input: Dell WMI hotkeys as /devices/virtual/input/input5
[ 17.133072] cfg80211: Calling CRDA to update world regulatory domain
[ 17.174398] nvidia: module license 'NVIDIA' taints kernel.
[ 17.174403] Disabling lock debugging due to kernel taint
[ 17.176720] cfg80211: World regulatory domain updated:
[ 17.176725] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 17.176731] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.176737] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.176742] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.176747] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.176752] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.237121] b43-phy0: Broadcom 4311 WLAN found (core revision 10)
[ 17.298621] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04793/0x300000/0x0
[ 17.298626] Synaptics: Clickpad mode enabled
[ 17.298632] serio: Synaptics pass-through port at isa0060/serio1/input0
[ 17.334512] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 17.414442] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 17.414515] alloc irq_desc for 44 on node -1
[ 17.414519] alloc kstat_irqs on node -1
[ 17.414537] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 17.414586] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 17.521461] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 17.521600] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 17.536077] phy0: Selected rate control algorithm 'minstrel'
[ 17.537231] Registered led device: b43-phy0::tx
[ 17.537271] Registered led device: b43-phy0::rx
[ 17.537304] Registered led device: b43-phy0::radio
[ 17.537395] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ]
[ 18.767338] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 18.767354] nvidia 0000:01:00.0: setting latency timer to 64
[ 18.767362] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 18.767577] NVRM: loading NVIDIA UNIX x86 Kernel Module 260.19.06 Mon Sep 13 06:35:06 PDT 2010
[ 18.799572] type=1400 audit(1297982673.356:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=904 comm="apparmor_parser"
[ 18.799591] type=1400 audit(1297982673.356:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=899 comm="apparmor_parser"
[ 18.800796] type=1400 audit(1297982673.356:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=904 comm="apparmor_parser"
[ 18.800985] type=1400 audit(1297982673.356:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=899 comm="apparmor_parser"
[ 18.801502] type=1400 audit(1297982673.360:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=904 comm="apparmor_parser"
[ 18.801742] type=1400 audit(1297982673.360:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=899 comm="apparmor_parser"
[ 18.804405] type=1400 audit(1297982673.360:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=906 comm="apparmor_parser"
[ 18.805679] type=1400 audit(1297982673.364:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=906 comm="apparmor_parser"
[ 18.806383] type=1400 audit(1297982673.364:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=906 comm="apparmor_parser"
[ 18.879056] type=1400 audit(1297982673.436:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=995 comm="apparmor_parser"
[ 19.228166] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[ 19.328824] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.344915] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.549120] ppdev: user-space parallel port driver
[ 31.361598] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 31.361605] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
[ 31.361607] vboxdrv: counter framework which can generate NMIs is active. You have to prevent
[ 31.361609] vboxdrv: the usage of hardware performance counters by
[ 31.361611] vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid
[ 31.361616] vboxdrv: Found 2 processor cores.
[ 31.362977] vboxdrv: fAsync=0 offMin=0x302 offMax=0x1a5e
[ 31.364447] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 31.364452] vboxdrv: Successfully loaded version 3.2.8_OSE (interface 0x00140001).
[ 33.221989] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[ 63.685652] wlan0: authenticate with ##:##:##:##:##:## (try 1)
[ 63.688336] wlan0: authenticated
[ 63.688676] wlan0: associate with ##:##:##:##:##:## (try 1)
[ 63.691063] wlan0: RX AssocResp from ##:##:##:##:##:## (capab=0x451 status=0 aid=3)
[ 63.691069] wlan0: associated
[ 63.692368] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 67.005591] padlock: VIA PadLock not detected.
[ 74.417032] wlan0: no IPv6 routers present
[ 87.925064] CE: hpet increased min_delta_ns to 7500 nsec

It is an awesome Linux project! I really like it. Wireless set up was a little difficult at first, but I managed to find out how to set it up in less than an hour after live CD was installed on the hard drive. I went to this distribution from trying Debian 6.0. I liked that one, but laptops usually have a non-standard set up and I felt more comfortable setting up my laptop on Mint Linux 10.
***

GhoS
Level 3
Level 3
Posts: 135
Joined: Wed Dec 30, 2009 8:41 pm

Re: Linux Mint 10 Newbie comments!

Post by GhoS » Thu Feb 17, 2011 8:44 pm

Glad you like it, but not sure why you had to go post the whole install sequence (at least assume that's what it is lol)

Post Reply

Return to “About Mint Editions”