Bluetooth Dialup not working. Mint 17

Connection sharing, Firewall, Samba..etc
Forum rules
Before you post please read how to get help
Hairyloon
Level 3
Level 3
Posts: 147
Joined: Thu Sep 22, 2011 8:15 am

Bluetooth Dialup not working. Mint 17

Postby Hairyloon » Mon Oct 23, 2017 3:58 am

Ive installed blueman, when I try to set up dial up networking, it says: "Device added successfully, but failed to connect."
I'm not sure how, but in "Recent Connections" I have both "Dial up Networking (DUN) on <phone>" and "Dial up Networking on <phone>". The former appears to connect to the phone, but doesn't connect the phone to the network. So does the latter, but it seemed to do it somewhat different.
On neither can I see a way to disconnect other than to turn off the bluetooth...

Hairyloon
Level 3
Level 3
Posts: 147
Joined: Thu Sep 22, 2011 8:15 am

Re: Bluetooth Dialup not working. Mint 17

Postby Hairyloon » Sun Nov 12, 2017 5:28 am

Any ideas?
My first thought is to use an older version of the bluetooth software, since it worked perfectly well in the earlier Mint. I'm not sure the best way to do that though. :?

Code: Select all

~ $ inxi -Fxz
System:    Host: Old-Faithful Kernel: 3.13.0-37-generic x86_64 (64 bit, gcc: 4.8.2)
           Desktop: N/A Distro: Linux Mint 17.1 Rebecca
Machine:   System: Dell (portable) product: Latitude E4300
           Mobo: Dell model: 0D201R Bios: Dell version: A26 date: 06/04/2013
CPU:       Dual core Intel Core2 Duo CPU P9400 (-MCP-) cache: 6144 KB flags: (lm nx sse sse2 sse3 sse4_1 ssse3 vmx) bmips: 9575.9
           Clock Speeds: 1: 800.00 MHz 2: 800.00 MHz
Graphics:  Card: Intel Mobile 4 Series Chipset Integrated Graphics Controller bus-ID: 00:02.0
           X.Org: 1.15.1 drivers: intel (unloaded: fbdev,vesa) Resolution: 1280x800@60.0hz
           GLX Renderer: Mesa DRI Mobile Intel GM45 Express Chipset GLX Version: 2.1 Mesa 10.1.3 Direct Rendering: Yes
Audio:     Card: Intel 82801I (ICH9 Family) HD Audio Controller driver: snd_hda_intel bus-ID: 00:1b.0
           Sound: Advanced Linux Sound Architecture ver: k3.13.0-37-generic
Network:   Card-1: Broadcom BCM4322 802.11a/b/g/n Wireless LAN Controller driver: wl bus-ID: 0c:00.0
           IF: wlan0 state: up mac: <filter>
           Card-2: Intel 82567LM Gigabit Network Connection driver: e1000e ver: 2.3.2-k port: efe0 bus-ID: 00:19.0
           IF: eth0 state: down mac: <filter>
Drives:    HDD Total Size: 634.3GB (37.7% used) 1: id: /dev/sda model: SAMSUNG_HM500JI size: 500.1GB
           2: USB id: /dev/sdb model: UDisk size: 134.2GB
Partition: ID: / size: 93G used: 15G (17%) fs: ext4 ID: swap-1 size: 4.24GB used: 0.00GB (0%) fs: swap
RAID:      No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors:   None detected - is lm-sensors installed and configured?
Info:      Processes: 167 Uptime: 9 min Memory: 866.3/3905.7MB Runlevel: 2 Gcc sys: 4.8.4 Client: Shell inxi: 1.8.4


Return to “Other networking topics”