Intel 845M issue: screen display upper left only

Forum rules
Before you post please read how to get help
Level 1
Level 1
Posts: 1
Joined: Wed Oct 19, 2011 11:58 am

Intel 845M issue: screen display upper left only

Postby markman » Wed Oct 19, 2011 12:15 pm

I've got a Dell Inspiron 1100 laptop with an old 2.4Ghz Celeron processor (intel graphics 845GM). I've just installed the LXDE 32-bit version released 08/16/11 and have received updates. I'm using brtfs and I'm getting the 'Error: sparse files not allowed' error at bootup. I press a key to proceed and then the screen goes blank for about 5 minutes. What finally comes up in a graphical display, but it only occupies the upper left quadrant (roughly) of the screen. The quadrant below displays a pseudo-smearing effect of the bottom edge of the display in the upper left and the right half of the screen is black!! (Installing lrandr to fix the resolution has no effect but then again I wouldn't think it should anyways.)

I'm really anxious/excited to use this LXDE version but obviously having only the upper left of your screen working really spoils it. I understand the Intel 845M graphics has issues with ubuntu derivatives but is there any hope to get this to work? Is there something I can do with intel-gpu-tools, perhaps? :?:

User avatar
Level 6
Level 6
Posts: 1309
Joined: Thu May 19, 2011 1:32 pm
Location: USA

Re: Intel 845M issue: screen display upper left only

Postby wyrdoak » Wed Oct 19, 2011 12:35 pm

See if installing intel-microcode will help. It's in the package manager. I have the same problem when connected to an external monitor but everything comes out OK at logon.

The microcode data file for Linux contains the latest microcode
definitions for all Intel processors. Intel releases microcode
updates to correct processor behavior as documented in the
respective processor specification updates. While the regular
approach to getting this microcode update is via a BIOS upgrade,
Intel realizes that this is an administrative hassle; the Linux
Operating System has a mechanism to update the microcode after
booting the OS.

This package contains only the microcode, so it needs the loader
provided in the package microcode.ctl
-Dell Mini Inspiron 910 Netbook-Atom CPU-N270-1.60ghz; 16gbs mini ePCI PATA SSD
RAM- 1gbs-(LinixMint-17.1: KDE)

Level 1
Level 1
Posts: 1
Joined: Thu Nov 03, 2011 10:03 pm

Re: Intel 845M issue: screen display upper left only

Postby tjwells » Thu Nov 03, 2011 10:24 pm

I have a Dell 1100 with 512 ram. I am using Linux Mint 11.0. When I installed it I had a 640 x 480 display in the upper left of the screen and a ghostlike image of the same 640 x 480 screen below it. So it was similar to your problem. I ran startup-manager and selected 1024 x 768 on the first screen, and also on the advanced screen. I rebooted and the display has been great at 1024 x 768. I dual boot with Windows XP, so before doing the above I, typed e at the boot menu, and added vga=792 at the end of the line that boots the kernel. Then I pushed F10 key and booted up fine. Running startup-manager as stated above puts vga=792 in permanently, so you don't have to edit the file on each reboot.

Level 1
Level 1
Posts: 26
Joined: Mon Feb 21, 2011 5:46 pm

Re: Intel 845M issue: screen display upper left only

Postby Daikini » Sun Mar 11, 2012 1:33 am

I have an Inspiron 1100 that I installed LM12 on (over Ubuntu 10).

The resolution was a perfect native 1024x768 in Ububtu. Now, I have the same problem listed in this thread.

The display shows up now in the middle of the screen (previously it was in the top left with a "ghost" below it, and black to the right of both.

Now I get blue vertical lines through the whole screen, and still only 640x480 or so. The display section of System Settings is locked at 640x480 and sometimes it's "laptop" other times, "unidentified" or "unknown."

I've modded this several times now according to posts in this forum. Here's what I had to do to get it to work:

    Install startup-manager (not included in Mint 12) using Software Manager. Applications>Other>Software Manager

    Once installed, it shows up in the same menu: Applications>Other>Startup-Manager

    Select 1024x768 on both tabs of Startup-Manager, close it.

    Open etc/default/grub, as administrator (right-click on grub to select Open As Administrator) and change the line where vga=791 to vga=792, per tjwells in this thread.

    Then open Software Manager again and download and install Intel-Microcode as well as microcode.ctl (search for both and install).

    After completing all of this, reboot your computer.

That's it. It should work. The microcode steps may or may not be necessary. I did it and it works, but I did a lot of things before it worked.

All of this is just a combination of three threads on this subject. In sum, it worked for me.

Best of luck to anyone else out there with an old DELL.

Last edited by Daikini on Tue Mar 13, 2012 12:52 am, edited 1 time in total.

Level 2
Level 2
Posts: 75
Joined: Tue Jun 01, 2010 5:50 pm

Re: Intel 845M issue: screen display upper left only

Postby cudayne » Sun Mar 11, 2012 3:15 am

its not limited too dell my hp laptop has teh same problem i plan on trying this fix same display adapter as noted above with the display in upper left corner of moniter.

Level 3
Level 3
Posts: 199
Joined: Wed Apr 27, 2011 12:18 pm

Re: Intel 845M issue: screen display upper left only

Postby jp734 » Fri Mar 23, 2012 11:40 pm

I had a problem with my intel graphics where I was getting a "black screen" and was able to fix by editing /boot/grub/grub.cfg and adding "i915.modeset=1". PLEASE NOTE that my graphics card is 915GM and yours is 845M.
IBM-X41 1.5GHz 1GB 32Gb - Lubuntu 12.10
Custom PC: Core2Quad 2.83GHz - 4GB - (3) Dell E197FP, (2) Radeon HD 5450
--- Linux Mint 15 Mate - Lubuntu 13.04 - CrunchBang Waldorf


Return to “Others”

Who is online

Users browsing this forum: No registered users and 4 guests