Acer ES 15 Laptop wakes up immediately after suspend and hibernate

[Machli]

Hallow,
After I've installed LM 18.2 Mate 64-bit on the laptop with UEFI and GPT alongside with W10 I this behavior. I tried to manipulate with

Code: Select all

/proc/acpi/wakeup

as described here viewtopic.php?t=99256 but it doesn't help.

[Pjotr]

Please generate an overview of your system like this:
- Launch a terminal window (this is how to launch a terminal window);
- make the terminal window full screen, to avoid chopped lines;
- Copy/paste this command into the terminal:

Code: Select all

inxi -Fxz

(if you type: the letter F is a capital letter)

Press Enter.

Copy/paste the output in your next message.

[Machli]

Here you are

Code: Select all

System:    Host: evgeny-Aspire-ES1-523 Kernel: 4.8.0-53-generic x86_64 (64 bit gcc: 5.4.0)
           Desktop: MATE 1.18.0 (Gtk 3.18.9-1ubuntu3.3)
           Distro: Linux Mint 18.2 Sonya
Machine:   Mobo: Acer model: TRICERA_CZL v: V1.02
           Bios: Insyde v: V1.02 date: 09/19/2016
CPU:       Quad core AMD A6-7310 APU with AMD Radeon R4 Graphics (-MCP-) cache: 8192 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm) bmips: 15970
           clock speeds: max: 2000 MHz 1: 1400 MHz 2: 1200 MHz 3: 1200 MHz
           4: 1600 MHz
Graphics:  Card: Advanced Micro Devices [AMD/ATI] Mullins [Radeon R4/R5 Graphics]
           bus-ID: 00:01.0
           Display Server: X.Org 1.18.4 drivers: ati,radeon (unloaded: fbdev,vesa)
           Resolution: 1366x768@59.97hz
           GLX Renderer: Gallium 0.4 on AMD MULLINS (DRM 2.46.0 / 4.8.0-53-generic, LLVM 3.8.0)
           GLX Version: 3.0 Mesa 12.0.6 Direct Rendering: Yes
Audio:     Card-1 Advanced Micro Devices [AMD] FCH Azalia Controller
           driver: snd_hda_intel bus-ID: 00:14.2
           Card-2 Advanced Micro Devices [AMD/ATI] Kabini HDMI/DP Audio
           driver: snd_hda_intel bus-ID: 00:01.1
           Sound: Advanced Linux Sound Architecture v: k4.8.0-53-generic
Network:   Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
           driver: r8169 v: 2.3LK-NAPI port: 2000 bus-ID: 01:00.0
           IF: enp1s0 state: up speed: 100 Mbps duplex: full mac: <filter>
           Card-2: Qualcomm Atheros Device 0042
           driver: ath10k_pci bus-ID: 02:00.0
           IF: wlp2s0 state: down mac: <filter>
Drives:    HDD Total Size: 500.1GB (15.3% used)
           ID-1: /dev/sda model: TOSHIBA_MQ01ABF0 size: 500.1GB
Partition: ID-1: / size: 19G used: 6.7G (39%) fs: ext4 dev: /dev/sda4
           ID-2: /home size: 318G used: 18G (6%) fs: ext4 dev: /dev/sda7
           ID-3: swap-1 size: 6.00GB used: 0.03GB (0%) fs: swap dev: /dev/sda6
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 46.6C mobo: N/A gpu: 43.0
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 213 Uptime: 8:35 Memory: 2167.4/3404.8MB
           Init: systemd runlevel: 5 Gcc sys: 5.4.0
           Client: Shell (bash 4.3.481) inxi: 2.2.35

[Pjotr]

Try this:

Install the latest kernel from the 4.10 series. This should be a regular level 4 update.

Then reboot.

Does that help?

[Machli]

No.

[Pjotr]

Then try kernels from even higher series:
Update Manager - panel: View - Linux kernels

First install the latest kernel of the 4.11 series. Reboot after installing it.
When no avail, install the latest kernel of the 4.13 series.

[Machli]

I went through all the stable kernels since 4.8.0. Nothing changes.