I have seen other people say change the usb mode to MSC, but my software on my sandisk doesn't say this anywhere in settings. Its like they got rid of that feature. Anyways, I have seen people getting it to work. Other solutions I have tried are switching to different cables, no luck so far. Here's some terminal info to prove my computer recognizes it but it won't appear under devices or anywhere else.
nathan99@Hades:~$ lsusb
Bus 002 Device 002: ID 8087:8000 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 004: ID 05af:0702 Jing-Mold Enterprise Co., Ltd HP Wireless Keyboard Kit
Bus 003 Device 003: ID 0457:104e Silicon Integrated Systems Corp. SiS HID Touch Controller
Bus 003 Device 009: ID 0781:d001 SanDisk Corp. Clip Sport Plus
Bus 003 Device 002: ID 2357:011e TP-Link AC600 wireless Realtek RTL8811AU [Archer T2U Nano]
Bus 003 Device 006: ID 04f2:b40b Chicony Electronics Co., Ltd HP High Definition 1MP Webcam
Bus 003 Device 005: ID 0a5c:21fb Broadcom Corp. BCM20702A0
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
nathan99@Hades:~$ dmesg | tail -n 20
[10047.321671] sd 6:0:0:0: [sdb] Write Protect is off
[10047.321674] sd 6:0:0:0: [sdb] Mode Sense: 00 c0 00 00
[10047.322757] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[10047.342187] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[10382.254056] usb 3-6: USB disconnect, device number 8
[12793.257692] usb 3-6: new high-speed USB device number 9 using xhci_hcd
[12793.425816] usb 3-6: New USB device found, idVendor=0781, idProduct=d001, bcdDevice= 1.00
[12793.425821] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12793.425822] usb 3-6: Product: Clip Sport Plus
[12793.425824] usb 3-6: Manufacturer: SanDisk
[12793.425825] usb 3-6: SerialNumber: C12CE197CED27D47
[12793.427595] usb-storage 3-6:1.0: USB Mass Storage device detected
[12793.427950] scsi host6: usb-storage 3-6:1.0
[12794.452104] scsi 6:0:0:0: Direct-Access SanDisk Clip Sport Plus PQ: 0 ANSI: 0 CCS
[12794.452294] sd 6:0:0:0: Attached scsi generic sg2 type 0
[12794.453085] sd 6:0:0:0: [sdb] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
[12794.454130] sd 6:0:0:0: [sdb] Write Protect is off
[12794.454134] sd 6:0:0:0: [sdb] Mode Sense: 00 c0 00 00
[12794.455240] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[12794.477969] sd 6:0:0:0: [sdb] Attached SCSI removable disk
nathan99@Hades:~$
Sandisk sport clip won't show up in Devices but is recognized
Forum rules
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Sandisk sport clip won't show up in Devices but is recognized
Last edited by LockBot on Mon May 01, 2023 10:00 pm, edited 1 time in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Re: Sandisk sport clip won't show up in Devices but is recognized
Please read the forum rules with regards to Sect5. Information of the system you are using is required. In terminal, copy & paste the following command and post the results back here in between the code display brackets, 5th icon above the text box.
Software on sandisk is for windows, not linux.
I'm assuming that device is a MP3 player?
Has been detected.
You can check by starting Gparted and see if it has been detected, if it has then it needs to be mounted.
Code: Select all
inxi -Fxzmy software on my sandisk doesn't say this anywhere in settings.Software on sandisk is for windows, not linux.
I'm assuming that device is a MP3 player?
Bus 003 Device 009: ID 0781:d001 SanDisk Corp. Clip Sport Plus Has been detected.
You can check by starting Gparted and see if it has been detected, if it has then it needs to be mounted.
Last edited by kato181 on Wed Nov 16, 2022 3:32 am, edited 2 times in total.
Re: Sandisk sport clip won't show up in Devices but is recognized
When posting results, they should be done like this..rundex wrote: ⤴Tue Nov 01, 2022 5:13 pm I have seen other people say change the usb mode to MSC, but my software on my sandisk doesn't say this anywhere in settings. Its like they got rid of that feature. Anyways, I have seen people getting it to work. Other solutions I have tried are switching to different cables, no luck so far. Here's some terminal info to prove my computer recognizes it but it won't appear under devices or anywhere else.
nathan99@Hades:~$ lsusb
Bus 002 Device 002: ID 8087:8000 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 004: ID 05af:0702 Jing-Mold Enterprise Co., Ltd HP Wireless Keyboard Kit
Bus 003 Device 003: ID 0457:104e Silicon Integrated Systems Corp. SiS HID Touch Controller
Bus 003 Device 009: ID 0781:d001 SanDisk Corp. Clip Sport Plus
Bus 003 Device 002: ID 2357:011e TP-Link AC600 wireless Realtek RTL8811AU [Archer T2U Nano]
Bus 003 Device 006: ID 04f2:b40b Chicony Electronics Co., Ltd HP High Definition 1MP Webcam
Bus 003 Device 005: ID 0a5c:21fb Broadcom Corp. BCM20702A0
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
nathan99@Hades:~$ dmesg | tail -n 20
[10047.321671] sd 6:0:0:0: [sdb] Write Protect is off
[10047.321674] sd 6:0:0:0: [sdb] Mode Sense: 00 c0 00 00
[10047.322757] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[10047.342187] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[10382.254056] usb 3-6: USB disconnect, device number 8
[12793.257692] usb 3-6: new high-speed USB device number 9 using xhci_hcd
[12793.425816] usb 3-6: New USB device found, idVendor=0781, idProduct=d001, bcdDevice= 1.00
[12793.425821] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12793.425822] usb 3-6: Product: Clip Sport Plus
[12793.425824] usb 3-6: Manufacturer: SanDisk
[12793.425825] usb 3-6: SerialNumber: C12CE197CED27D47
[12793.427595] usb-storage 3-6:1.0: USB Mass Storage device detected
[12793.427950] scsi host6: usb-storage 3-6:1.0
[12794.452104] scsi 6:0:0:0: Direct-Access SanDisk Clip Sport Plus PQ: 0 ANSI: 0 CCS
[12794.452294] sd 6:0:0:0: Attached scsi generic sg2 type 0
[12794.453085] sd 6:0:0:0: [sdb] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
[12794.454130] sd 6:0:0:0: [sdb] Write Protect is off
[12794.454134] sd 6:0:0:0: [sdb] Mode Sense: 00 c0 00 00
[12794.455240] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[12794.477969] sd 6:0:0:0: [sdb] Attached SCSI removable disk
nathan99@Hades:~$
Code: Select all
nathan99@Hades:~$ lsusb
Bus 002 Device 002: ID 8087:8000 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 004: ID 05af:0702 Jing-Mold Enterprise Co., Ltd HP Wireless Keyboard Kit
Bus 003 Device 003: ID 0457:104e Silicon Integrated Systems Corp. SiS HID Touch Controller
Bus 003 Device 009: ID 0781:d001 SanDisk Corp. Clip Sport Plus
Bus 003 Device 002: ID 2357:011e TP-Link AC600 wireless Realtek RTL8811AU [Archer T2U Nano]
Bus 003 Device 006: ID 04f2:b40b Chicony Electronics Co., Ltd HP High Definition 1MP Webcam
Bus 003 Device 005: ID 0a5c:21fb Broadcom Corp. BCM20702A0
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubCode: Select all
nathan99@Hades:~$ dmesg | tail -n 20
[10047.321671] sd 6:0:0:0: [sdb] Write Protect is off
[10047.321674] sd 6:0:0:0: [sdb] Mode Sense: 00 c0 00 00
[10047.322757] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[10047.342187] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[10382.254056] usb 3-6: USB disconnect, device number 8
[12793.257692] usb 3-6: new high-speed USB device number 9 using xhci_hcd
[12793.425816] usb 3-6: New USB device found, idVendor=0781, idProduct=d001, bcdDevice= 1.00
[12793.425821] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12793.425822] usb 3-6: Product: Clip Sport Plus
[12793.425824] usb 3-6: Manufacturer: SanDisk
[12793.425825] usb 3-6: SerialNumber: C12CE197CED27D47
[12793.427595] usb-storage 3-6:1.0: USB Mass Storage device detected
[12793.427950] scsi host6: usb-storage 3-6:1.0
[12794.452104] scsi 6:0:0:0: Direct-Access SanDisk Clip Sport Plus PQ: 0 ANSI: 0 CCS
[12794.452294] sd 6:0:0:0: Attached scsi generic sg2 type 0
[12794.453085] sd 6:0:0:0: [sdb] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
[12794.454130] sd 6:0:0:0: [sdb] Write Protect is off
[12794.454134] sd 6:0:0:0: [sdb] Mode Sense: 00 c0 00 00
[12794.455240] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[12794.477969] sd 6:0:0:0: [sdb] Attached SCSI removable disk