Kernel freeze shortly after resume from hibernate

Archived topics about LMDE 1
Forum rules
tdtodd
Level 1
Level 1
Posts: 7
Joined: Tue Mar 27, 2012 1:37 am

Kernel freeze shortly after resume from hibernate

Postby tdtodd » Tue Mar 27, 2012 1:58 am

Greetings! I'm runnning LMDE (64bit with update pack 3) on a Thinkpad
X201s and sometimes get a kernel freeze shortly after resuming from
hibernation.

I've included part of my syslog, the problem seems to occur at the
"divide error: 0000 [#1] SMP" line below. The resume eventually
finishes but I get a kernel freeze shortly afterwards.

Any ideas or help with this would be much appreciated.

Thanks,
Terry

Mar 27 00:50:33 bee kernel: [ 5740.366928] iwlagn 0000:02:00.0: RF_KILL bit toggled to enable radio.
Mar 27 00:50:33 bee kernel: [ 5740.366933] pci 0000:00:1e.0: setting latency timer to 64
Mar 27 00:50:33 bee kernel: [ 5740.370202] sd 0:0:0:0: [sda] Starting disk
Mar 27 00:50:33 bee kernel: [ 5740.403849] Extended CMOS year: 2000
Mar 27 00:50:33 bee kernel: [ 5740.474866] divide error: 0000 [#1] SMP
Mar 27 00:50:33 bee kernel: [ 5740.474871] CPU 0
Mar 27 00:50:33 bee kernel: [ 5740.474873] Modules linked in: iwlagn mac80211 aesni_intel cryptd aes_x86_64 aes_generic parport_pc ppdev lp parport bnep rfcomm acpi_cpufreq mperf cpufreq_conservative cpufreq_userspace cpufreq_stats cpufreq_powersave pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) binfmt_misc fuse loop dm_crypt dm_mod joydev btusb bluetooth snd_hda_codec_hdmi snd_hda_codec_conexant i915 snd_hda_intel snd_hda_codec drm_kms_helper snd_hwdep snd_pcm_oss drm snd_mixer_oss thinkpad_acpi arc4 i2c_algo_bit snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq psmouse snd_timer evdev intel_ips snd_seq_device serio_raw battery snd pcspkr i2c_i801 cfg80211 nvram rfkill soundcore tpm_tis ac tpm power_supply snd_page_alloc tpm_bios i2c_core wmi video button processor ext4 mbcache jbd2 crc16 btrfs zlib_deflate crc32c libcrc32c sg sd_mod crc_t10dif ahci libahci libata scsi_mod ehci_hcd usbcore thermal thermal_sys e1000e [last unloaded: mac80211]
Mar 27 00:50:33 bee kernel: [ 5740.474940]
Mar 27 00:50:33 bee kernel: [ 5740.474943] Pid: 470, comm: ips-monitor Tainted: G O 3.0.0-1-amd64 #1 LENOVO 514328U/514328U
Mar 27 00:50:33 bee kernel: [ 5740.474946] RIP: 0010:[<ffffffffa03bd3c8>] [<ffffffffa03bd3c8>] i915_chipset_val+0xbc/0xea [i915]
Mar 27 00:50:33 bee kernel: [ 5740.474962] RSP: 0018:ffff880231b67dd0 EFLAGS: 00010246
Mar 27 00:50:33 bee kernel: [ 5740.474964] RAX: 0000000000000004 RBX: ffff88022f7d0000 RCX: 0000000000000126
Mar 27 00:50:33 bee kernel: [ 5740.474966] RDX: 0000000000000000 RSI: 0000000000005f8c RDI: 0000000000000000
Mar 27 00:50:33 bee kernel: [ 5740.474968] RBP: 0000000000530b64 R08: ffff880231b66000 R09: 00000000000000f5
Mar 27 00:50:33 bee kernel: [ 5740.474970] R10: dead000000100100 R11: 0000000000000001 R12: 0000000000000000
Mar 27 00:50:33 bee kernel: [ 5740.474972] R13: 000000000031dd2b R14: 000000000000b71a R15: 000000010014c2a7
Mar 27 00:50:33 bee kernel: [ 5740.474974] FS: 0000000000000000(0000) GS:ffff88023bc00000(0000) knlGS:0000000000000000
Mar 27 00:50:33 bee kernel: [ 5740.474977] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
Mar 27 00:50:33 bee kernel: [ 5740.474978] CR2: 0000000001bdf9f8 CR3: 0000000001603000 CR4: 00000000000006f0
Mar 27 00:50:33 bee kernel: [ 5740.474981] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
Mar 27 00:50:33 bee kernel: [ 5740.474983] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Mar 27 00:50:33 bee kernel: [ 5740.474985] Process ips-monitor (pid: 470, threadinfo ffff880231b66000, task ffff880231ffd8d0)
Mar 27 00:50:33 bee kernel: [ 5740.474987] Stack:
Mar 27 00:50:33 bee kernel: [ 5740.474988] ffff88022f7d0000 000000010014c2a7 ffff880231b67e50 ffff880231ffd8d0
Mar 27 00:50:33 bee kernel: [ 5740.474992] 0000000000000077 ffffffffa03bd648 ffff880231ffd8d0 ffff8802314d7d80
Mar 27 00:50:33 bee kernel: [ 5740.474995] 000000010014c2a7 ffffffffa0278d6c ffff880231ffd8d0 ffff88022f4c6d40
Mar 27 00:50:33 bee kernel: [ 5740.474998] Call Trace:
Mar 27 00:50:33 bee kernel: [ 5740.475006] [<ffffffffa03bd648>] ? i915_read_mch_val+0x28/0x44 [i915]
Mar 27 00:50:33 bee kernel: [ 5740.475012] [<ffffffffa0278d6c>] ? ips_monitor+0x341/0x425 [intel_ips]
Mar 27 00:50:33 bee kernel: [ 5740.475017] [<ffffffffa02782df>] ? ips_remove+0x125/0x125 [intel_ips]
Mar 27 00:50:33 bee kernel: [ 5740.475021] [<ffffffffa0278a2b>] ? kzalloc.clone.10+0x12/0x12 [intel_ips]
Mar 27 00:50:33 bee kernel: [ 5740.475026] [<ffffffffa0278a2b>] ? kzalloc.clone.10+0x12/0x12 [intel_ips]
Mar 27 00:50:33 bee kernel: [ 5740.475031] [<ffffffff8105fc0b>] ? kthread+0x7a/0x82
Mar 27 00:50:33 bee kernel: [ 5740.475036] [<ffffffff8133cba4>] ? kernel_thread_helper+0x4/0x10
Mar 27 00:50:33 bee kernel: [ 5740.475039] [<ffffffff8105fb91>] ? kthread_worker_fn+0x149/0x149
Mar 27 00:50:33 bee kernel: [ 5740.475042] [<ffffffff8133cba0>] ? gs_change+0x13/0x13
Mar 27 00:50:33 bee kernel: [ 5740.475043] Code: 48 63 c9 0f b7 14 cd 74 1d 3f a0 0f b7 34 cd 76 1d 3f a0 eb 0f ff c1 48 83 c6 08 83 f9 06 75 c9 31 f6 31 d2 89 d1 45 89 e4 31 d2
Mar 27 00:50:33 bee kernel: [ 5740.475062] RIP [<ffffffffa03bd3c8>] i915_chipset_val+0xbc/0xea [i915]
Mar 27 00:50:33 bee kernel: [ 5740.475069] RSP <ffff880231b67dd0>
Mar 27 00:50:33 bee kernel: [ 5740.475074] ---[ end trace 1ea35cfbaf795adf ]---
Mar 27 00:50:33 bee kernel: [ 5740.686744] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Mar 27 00:50:33 bee kernel: [ 5740.694737] ata5: SATA link down (SStatus 0 SControl 300)
Mar 27 00:50:33 bee kernel: [ 5740.702869] ata2: SATA link down (SStatus 0 SControl 300)
Mar 27 00:50:33 bee kernel: [ 5740.710818] ata6: SATA link down (SStatus 0 SControl 300)
Mar 27 00:50:33 bee kernel: [ 5740.714738] usb 1-1: reset high speed USB device number 2 using ehci_hcd
Mar 27 00:50:33 bee kernel: [ 5740.740304] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
Mar 27 00:50:33 bee kernel: [ 5740.740310] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
Mar 27 00:50:33 bee kernel: [ 5740.740316] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Mar 27 00:50:33 bee kernel: [ 5740.850414] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
Mar 27 00:50:33 bee kernel: [ 5740.850421] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
Mar 27 00:50:33 bee kernel: [ 5740.850427] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Mar 27 00:50:33 bee kernel: [ 5740.920258] ata1.00: configured for UDMA/133
Mar 27 00:50:33 bee kernel: [ 5740.958712] usb 2-1: reset high speed USB device number 2 using ehci_hcd
Mar 27 00:50:33 bee kernel: [ 5741.162877] usb 1-1.3: reset full speed USB device number 3 using ehci_hcd
Mar 27 00:50:33 bee kernel: [ 5741.255632] PM: restore of devices complete after 897.179 msecs
Mar 27 00:50:33 bee kernel: [ 5741.388917] PM: Image restored successfully.
Mar 27 00:50:33 bee acpid: client 1712[0:0] has disconnected

jspice9000
Level 1
Level 1
Posts: 23
Joined: Fri Dec 25, 2009 9:08 pm

Re: Kernel freeze shortly after resume from hibernate

Postby jspice9000 » Tue May 29, 2012 10:42 pm

A bit late, but this might help you. I just installed LM13 and I had the same problem using XFCE, Cinnamon, MATE etc. I increased my swap size and the problem went away. I made my swap 150% of my RAM. I also noted the same problem running LM12 from a flash drive...

Update.
Increasing the swap helped but it would still freeze intermittently. It appears that my MSI Wind U120 had a networking issue due to the R8187SE Wifi Card. I followed instructions found on the link below which appears to have fixed fixed the issue:

http://www.pcurtis.com/wind.htm#critical_power

One tiny note for less sophisticated users (like me), gksudo works in MATE, but not Cinnamon.


Return to “Archive”

Who is online

Users browsing this forum: No registered users and 1 guest